Fiber reinforced hydrated networks recapitulate the poroelastic mechanics of articular cartilage.

The role of poroelasticity on the functional performance of articular cartilage has been established in the scientific literature since the 1960s. Despite the extensive knowledge on this topic there remain few attempts to design for poroelasticity and to our knowledge no demonstration of an engineered poroelastic material that approaches the physiological performance. In this paper, we report on the development of an engineered material that begins to approach physiological poroelasticity. We quantify poroelasticity using the fluid load fraction, apply mixture theory to model the material system, and determine cytocompatibility using primary human mesenchymal stem cells. The design approach is based on a fiber reinforced hydrated network and uses routine fabrication methods (electrohydrodynamic deposition) and materials (poly[ɛ-caprolactone] and gelatin) to develop the engineered poroelastic material. This composite material achieved a mean peak fluid load fraction of 68%, displayed consistency with mixture theory, and demonstrated cytocompatibility. This work creates a foundation for designing poroelastic cartilage implants and developing scaffold systems to study chondrocyte mechanobiology and tissue engineering. STATEMENT OF SIGNIFICANCE: Poroelasticity drives the functional mechanics of articular cartilage (load bearing and lubrication). In this work we develop the design rationale and approach to produce a poroelastic material, known as a fiber reinforced hydrated network (FiHy™), that begins to approach the native performance of articular cartilage. This is the first engineered material system capable of exceeding isotropic linear poroelastic theory. The framework developed here enables fundamental studies of poroelasticity and the development of translational materials for cartilage repair.

Investigation of Rhodnius prolixus head anatomy using microtomography.

In the last years, microtomography has proved to be a powerful technique on insects' studies, allowing a detailed view of the structures' internal with a high resolution. One of the most important advantages about the use of microtomography in these studies is the fact that the dissection is not necessary, which decreases considerably the number of samples used on the insects' research. Some insects are used constantly in studies about morphology, metamorphosis, and reproduction, because they work as a model for others, and Rhodnius prolixus is one of the most studied in this group. This insect is also one of the main insect vectors of Chagas disease that kills around 12,000 people every year in Latin America. Some studies using laboratory microtomography conventional scanners combining with the correct staining methods have proved that it could be a powerful tool in biological research, allowing the visualisation of low-density tissues. The main goal of the present work was to use staining protocols to study Rhodnius prolixus with laboratory microtomography conventional scanners. The experiments were carried out at the imaging lab in the Theoretical Biology Department, University of Vienna, using an Xradia MicroXCT and at the University of Oslo, using a Skyscan 2211.

Synchrotron microtomography applied to the volumetric analysis of internal structures of Thoropa miliaris tadpoles.

Amphibians are models for studying applied ecological issues such as habitat loss, pollution, disease, and global climate change due to their sensitivity and vulnerability to changes in the environment. Developmental series of amphibians are informative about their biology, and X-ray based 3D reconstruction holds promise for quantifying morphological changes during growth-some with a direct impact on the possibility of an experimental investigation on several of the ecological topics listed above. However, 3D resolution and discrimination of their soft tissues have been difficult with traditional X-ray computed tomography, without time-consuming contrast staining. Tomographic data were initially performed (pre-processing and reconstruction) using the open-source software tool SYRMEP Tomo Project. Data processing and analysis of the reconstructed tomography volumes were conducted using the segmentation semi-automatic settings of the software Avizo Fire 8, which provide information about each investigated tissues, organs or bone elements. Hence, volumetric analyses were carried out to quantify the development of structures in different tadpole developmental stages. Our work shows that synchrotron X-ray microtomography using phase-contrast mode resolves the edges of the internal tissues (as well as overall tadpole morphology), facilitating the segmentation of the investigated tissues. Reconstruction algorithms and segmentation software played an important role in the qualitative and quantitative analysis of each target structure of the Thoropa miliaris tadpole at different stages of development, providing information on volume, shape and length. The use of the synchrotron X-ray microtomography setup of the SYRMEP beamline of Elettra Synchrotron, in phase-contrast mode, allows access to volumetric data for bone formation, eye development, nervous system and notochordal changes during the development (ontogeny) of tadpoles of a cycloramphid frog Thoropa miliaris. As key elements in the normal development of these and any other frog tadpole, the application of such a comparative ontogenetic study, may hold interest to researchers in experimental and environmental disciplines.

Ecdysis period of Rhodnius prolixus head investigated using phase contrast synchrotron microtomography.

Microtomography using synchrotron sources is a useful tool in biological imaging research since the phase coherence of synchrotron beams can be exploited to obtain images with high contrast resolution. This work is part of a series of works using phase contrast synchrotron microtomography in the study of Rhodnius prolixus head, the insect vector of Chagas' disease, responsible for about 12,000 deaths per year. The control of insect vector is the most efficient method to prevent this disease and studies have shown that the use of triflumuron, a chitin synthesis inhibitor, disrupted chitin synthesis during larval development and it's an alternative method against insect pests. The aim of this work was to investigate the biological effects of treatments with triflumuron in the ecdysis period (the moulting of the R. prolixus cuticle) using the new imaging beamline IMX at LNLS (Brazilian Synchrotron Light Laboratory). Nymphs of R. prolixus were taken from the Laboratory of Biochemistry and Physiology of Insects, Oswaldo Cruz Foundation, Brazil. Doses of 0.05mg of triflumuron were applied directly to the abdomen on half of the insects immediately after feeding. The insects were sacrificed 25days after feeding (intermoulting period) and fixed with glutaraldehyde. The results obtained using phase contrast synchrotron microtomography in R. prolixus showed amazing images of the effects of triflumuron on insects in the ecdysis period, and the formation of the new cuticle on those which were not treated with triflumuron. Both formation and malformation of this insect's cuticle have never been seen before with this technique.

3D histomorphometric quantification of trabecular bones by computed microtomography using synchrotron radiation.

Conventional bone histomorphometry is an important method for quantitative evaluation of bone microstructure. X-ray computed microtomography is a non-invasive technique, which can be used to evaluate histomorphometric indices in trabecular bones (BV/TV, BS/BV, Tb.N, Tb.Th, Tb.Sp). In this technique, 3D images are used to quantify the whole sample, differently from the conventional one, in which the quantification is performed in 2D slices and extrapolated for 3D case. In this work, histomorphometric quantification using synchrotron 3D X-ray computed microtomography was performed to quantify the bone structure at different skeletal sites as well as to investigate the effects of bone diseases on quantitative understanding of bone architecture. The images were obtained at Synchrotron Radiation for MEdical Physics (SYRMEP) beamline, at ELETTRA synchrotron radiation facility, Italy. Concerning the obtained results for normal and pathological bones from same skeletal sites and individuals, from our results, a certain declining bone volume fraction was achieved. The results obtained could be used in forming the basis for comparison of the bone microarchitecture and can be a valuable tool for predicting bone fragility.