Concentration-Dependent Effects of MXene Nanocomposite-Loaded Carboxymethyl Cellulose on Wound Healing.

Nanoparticles (NPs) have emerged as a promising solution for many biomedical applications. Although not all particles have antimicrobial or regenerative properties, certain NPs show promise in enhancing wound healing by promoting tissue regeneration, reducing inflammation, and preventing infection. Integrating various NPs can further enhance these effects. Herein, the zinc oxide (ZnO)-MXene-Ag nanocomposite was prepared, and the conjugation of its three components was confirmed through scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) mapping analysis. In vitro analysis using the agar well diffusion technique demonstrated that ZnO-MXene-Ag nanocomposite exhibited high antimicrobial efficacy, significantly inhibiting Escherichia coli, Salmonella, and Candida albicans, and showing enhanced potency when combined with tetracycline, resulting in a 2.6-fold increase against Staphylococcus and a 2.4-fold increase against Pseudomonas. The efficacy of nanocomposite-loaded carboxymethyl cellulose (CMC) gel on wound healing was investigated using varying concentrations (0, 1, 5, and 10 mg/mL). Wound healing was monitored over 21 days, with results indicating that wounds treated with 1 mg/mL ZnO-MXene-Ag gel exhibited superior healing compared to the control group (0 mg/mL), with significant improvements noted from Day 3 onward. Conversely, higher concentrations (10 mg/mL) resulted in reduced healing efficiency, particularly notable on Day 15. In conclusion, the ZnO-MXene-Ag nanocomposite-loaded CMC gel is a promising agent for enhanced wound healing and antimicrobial applications. These findings highlight the importance of optimizing NP concentration to maximize therapeutic benefits while minimizing potential cytotoxicity.

Bovine pulp extracellular matrix hydrogel for regenerative endodontic applications: in vitro characterization and in vivo analysis in a necrotic tooth model.

BACKGROUND: Regenerative endodontic procedures (REPs) offer the promise of restoring vitality and function to a previously necrotic and infected tooth. However, the nature of regenerated tissues following REPs remains unpredictable and uncontrollable. Decellularized extracellular matrix scaffolds have gained recent attention as scaffolds for regenerative endodontics. OBJECTIVES: Preparation and characterization of a bovine dental pulp-derived extracellular matrix (P-ECM) hydrogel for regenerative endodontic applications. Biocompatibility and regenerative capacity of the prepared scaffold were evaluated in vivo in a canine animal model. METHODS: Fifteen freshly extracted bovine molar teeth were used to prepare P-ECM hydrogels following approval of the institutional review board of the faculty of dentistry, Alexandria University. Decellularization and lyophilization of the extracted pulp tissues, DNA quantification and histological examination of decellularized P-ECM were done. P-ECM hydrogel was prepared by digestion of decellularized pulps. Prepared scaffolds were evaluated for protein content and release as well as release of VEGF, bFGF, TGF-ß1 and BMP2 using ELISA. Rabbit dental pulp stem cells' (rDPSCs) viability in response to P-ECM hydrogels was performed. Finally, proof-of-concept of the regenerative capacity of P-ECM scaffolds was assessed in an infected mature canine tooth model following REPs versus blood clot (BC), injectable platelet-rich fibrin (i-PRF) or hyaluronic acid (HA). Statistical analysis was done using independent t test, the Friedman test and chi-square tests (p value ≤ 0.05). RESULTS: DNA was found to be below the cut-off point (50 ng/mg tissue). Histological evaluation revealed absence of nuclei, retention of glycosaminoglycans (GAGs) and collagen content, respectively. P-ECM hydrogel had a total protein content of (493.12 µg/µl) and protein release was detected up to 14 days. P-ECM hydrogel also retained VEGF, bFGF, TGF-ß1 and BMP2. P-ECM hydrogel maintained the viability of rDPSCs as compared to cells cultured under control conditions. P-ECM hydrogel triggered more organized tissues compared to BC, i-PRF and HA when used in REPs for necrotic mature teeth in dogs. Periapical inflammation was significantly less in HA and P-ECM groups compared to blood-derived scaffolds. CONCLUSION: Bovine dental pulp-derived extracellular matrix (P-ECM) hydrogel scaffold retained its bioactive properties and demonstrated a promising potential in regenerative endodontic procedures compared to conventional blood-derived scaffolds.

Influence of extracellular matrix scaffolds on histological outcomes of regenerative endodontics in experimental animal models: a systematic review.

BACKGROUND: Decellularized extracellular matrix (dECM) from several tissue sources has been proposed as a promising alternative to conventional scaffolds used in regenerative endodontic procedures (REPs). This systematic review aimed to evaluate the histological outcomes of studies utilizing dECM-derived scaffolds for REPs and to analyse the contributing factors that might influence the nature of regenerated tissues. METHODS: The PRISMA 2020 guidelines were used. A search of articles published until April 2024 was conducted in Google Scholar, Scopus, PubMed and Web of Science databases. Additional records were manually searched in major endodontic journals. Original articles including histological results of dECM in REPs and in-vivo studies were included while reviews, in-vitro studies and clinical trials were excluded. The quality assessment of the included studies was analysed using the ARRIVE guidelines. Risk of Bias assessment was done using the (SYRCLE) risk of bias tool. RESULTS: Out of the 387 studies obtained, 17 studies were included for analysis. In most studies, when used as scaffolds with or without exogenous cells, dECM showed the potential to enhance angiogenesis, dentinogenesis and to regenerate pulp-like and dentin-like tissues. However, the included studies showed heterogeneity of decellularization methods, animal models, scaffold source, form and delivery, as well as high risk of bias and average quality of evidence. DISCUSSION: Decellularized ECM-derived scaffolds could offer a potential off-the-shelf scaffold for dentin-pulp regeneration in REPs. However, due to the methodological heterogeneity and the average quality of the studies included in this review, the overall effectiveness of decellularized ECM-derived scaffolds is still unclear. More standardized preclinical research is needed as well as well-constructed clinical trials to prove the efficacy of these scaffolds for clinical translation. OTHER: The protocol was registered in PROSPERO database #CRD42023433026. This review was funded by the Science, Technology and Innovation Funding Authority (STDF) under grant number (44426).

Histological evaluation of the regenerative potential of a novel photocrosslinkable gelatin-treated dentin matrix hydrogel in direct pulp capping: an animal study.

BACKGROUND: To assess histologically the success of the pulp capping approach performed in traumatically exposed dogs' teeth using a novel injectable gelatin-treated dentin matrix light cured hydrogel (LCG-TDM) compared with LCG, MTA and TheraCal LC. METHODS: Sixty-four dogs' teeth were divided into two groups (each including 32 teeth) based on the post-treatment evaluation period: group I: 2 weeks and group II: 8 weeks. Each group was further subdivided according to the pulp capping material into four subgroups (n = 8), with subgroup A (light-cured gelatin hydrogel) as the control subgroup, subgroup B (LCG-TDM), subgroup C (TheraCal LC), and subgroup D (MTA). Pulps were mechanically exposed in the middle of the cavity floor and capped with different materials. An assessment of periapical response was performed preoperatively and at 8 weeks. After 2 and 8-week intervals, the dogs were sacrificed, and the teeth were stained with hematoxylin-eosin and graded by using a histologic scoring system. Statistical analysis was performed using the chi-square and Kruskal-Wallis tests (p = 0.05). RESULTS: All subgroups showed mild inflammation with normal pulp tissue at 2 weeks with no significant differences between subgroups (p ≤ 0.05), except for the TheraCal LC subgroup, which exhibited moderate inflammation (62.5%). Absence of a complete calcified bridge was reported in all subgroups at 2 weeks, while at 8 weeks, the majority of samples in the LCG-TDM and MTA-Angelus subgroups showed complete dentin bridge formation and absence of inflammatory pulp response with no significant differences between them (p ≤ 0.05). However, the formed dentin in the LCG-TDM group was significantly thicker, with layers of ordered odontoblasts identified to create a homogeneous tubular structure and numerous dentinal tubule lines suggesting a favourable trend towards dentin regeneration. TheraCal LC samples revealed a reasonably thick dentin bridge with moderate inflammation (50%) and LCG showed heavily fibrous tissue infiltrates with areas of degenerated pulp with no signs of hard tissue formation. CONCLUSIONS: LCG-TDM, as an extracellular matrix-based material, has the potential to regenerate dentin and preserve pulp vitality, making it a viable natural alternative to silicate-based cements for healing in vivo dentin defects in direct pulp-capping procedures.

Photocrosslinkable gelatin-treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration: I. synthesis, characterizations and grafting optimization.

BACKGROUND: In recent years, treated dentin matrix (TDM) has been introduced as a bioactive hydrogel for dentin regeneration in DPC. However, no study has introduced TDM as a photocrosslinkable hydrogel with a natural photoinitiating system. Therefore, the present study aimed to explore the synthesis, characterizations and grafting optimization of injectable gelatin- glycidyl methacrylate (GMA)/TDM hydrogels as a novel photocrosslinkable pulp capping agent for dentin regeneration. METHODS: G-GMA/TDM hydrogel was photocrosslinked using a new two-component photoinitiating system composed of riboflavin as a photoinitiator under visible light and glycine as a first time coinitiator with riboflavin. The grafting reaction conditions of G-GMA/TDM e.g. GMA concentration and reaction time were optimized. The kinetic parameters e.g. grafting efficiency (GE) and grafting percentage (GP%) were calculated to optimize the grafting reaction, while yield (%) was determined to monitor the formation of the hydrogel. Moreover, G-GMA/TDM hydrogels were characterized by swelling ratio, degradation degree, and cytotoxicity. The instrumental characterizations e.g. FTIR, 1H-NMR, SEM and TGA, were investigated for verifying the grafting reaction. Statistical analysis was performed using F test (ANOVA) and Post Hoc Test (P = 0.05). RESULTS: The grafting reaction dramatically increased with an increase of both GMA concentration and reaction time. It was realized that the swelling degree and degradation rate of G-GMA/TDM hydrogels were significantly reduced by increasing the GMA concentration and prolonging the reaction time. When compared to the safe low and moderate GMA content hydrogels (0.048, 0.097 M) and shorter reaction times (6, 12, 24 h), G-GMA/TDM with high GMA contents (0.195, 0.391 M) and a prolonged reaction time (48 h) demonstrated cytotoxic effects against cells using the MTT assay. Also, the morphological surface of G-GMA/TDM freeze-dried gels was found more compacted, smooth and uniform due to the grafting process. Significant thermal stability was noticed due to the grafting reaction of G-GMA/TDM throughout the TGA results. CONCLUSIONS: G-GMA/TDM composite hydrogel formed by the riboflavin/glycine photoinitiating system is a potential bioactive and biocompatible system for in-situ crosslinking the activated-light pulp capping agent for dentin regeneration.

Nanoscale borosilicate bioactive glass for regenerative therapy of full-thickness skin defects in rabbit animal model.

Bioactive glass (BG) occupies a significant position in the field of hard and soft tissue regeneration. Different processing techniques and formulas have been introduced to expand their regenerative, angiogenic, and antibacterial properties. In the present study, a new formula of bborosilicate bioactive glass nanofibers was prepared and tested for its wound-healing efficacy in a rabbit animal model. The glass formula ((1-2) mol% of B2O3 (68-69) mol% of SiO2, and (29-30) mol% of CaO) was prepared primarily by the sol-gel technique followed by the electrospinning technique. The material was characterized for its ultrastructure using scanning electron microscopy, chemical composition using FTIR, and its dynamic in vitro biodegradability using ICP-AES. Twelve rabbits were subjected to surgical induction of full-thickness skin defects using a 1 cm2 custom-made stainlessteel skin punch. The bioactive glass nanofibers were used as a grafting material in 6 experimental rabbits, while the defects in the remaining rabbits were considered as the negative control samples. All defects were assessed clinically for the decrease in wound size and clinical signs of healing and histologically for angiogenesis, collagen density, inflammatory response, cell recruitment, epithelial lining, and appendages at 1,2 and 3 weeks following the intervention. Structural analysis of the glass fibers confirmed their nano-size which ranged from 150 to 700 nm. Moreover, the chemical analysis confirmed the presence of SiO2 and B2O3 groups within the structure of the nanofibers. Additionally, dynamic biodegradation analysis confirmed the rapid degradation of the material starting from the first 24 h and rapid leaching of calcium, silicon, and boron ions confirming its bioactivity. The wound healing study of the nanofibrous scaffold confirmed its ability to accelerate wound healing and the closure rate in healthy rabbits. Histological analysis of the defects confirmed the angiogenic, regenerative and antibacterial ability of the material throughout the study period. The results unveil the powerful therapeutic properties of the formed nanofibers and open a new gate for more experimental and clinical applications.

Structural, Thermal, and Optical Studies of Gamma Irradiated Polyvinyl Alcohol-, Lignosulfonate-, and Palladium Nanocomposite Film.

Nanocomposite (NC) films of polyvinyl alcohol (PVA), lignosulfonate (Lg), and nanosized palladium (Pd) were synthesized by ex-situ casting method. Samples from the synthesized PVA-Lg/Pd NC films were irradiated with 5-100 kGy γ doses. The effect of γ doses on the structural, thermal, and optical characteristics of the NC films were studied using different characterization techniques. The results indicated that the γ irradiation improves the decomposition temperature from 227 to 239 °C, signifying an increase in the thermal stability of the NC films. This was accompanied by a reduction of the melting temperature due to the increase of the amorphous phase. This can be attributed to the dominance of crosslinking. On the other hand, the refractive index increased from 2.21 to 2.32 while increasing the γ dose up to 100 kGy. This was associated with a reduction of the optical bandgap from 3.49 to 3.30 eV, which could be attributed to the increase in the amorphous phase as a result of crosslinking. This indicates an enhancement of the spreading of the NPs inside the blend matrix due to γ irradiation. This results in a more compacted construction of the PVA-Lg/Pd NC films. Furthermore, we used the Commission Internationale de E'Claire (CIE) method to estimate the change in color among the irradiated NC films and the pristine film. The PVA-Lg/Pd NC attained a significant color difference value greater than five, meaning permanent color changes.

Fabrication of sliver nanoparticles/polyvinyl alcohol/gelatin ternary nanofiber mats for wound healing application.

PURPOSE: In this study, we aimed to determine the regenerative and antimicrobial impact of the electrospun nanofiber mats, with/without silver nanoparticles (AgNPs), on full-thickness skin wounds in rabbits. METHODS: Polyvinyl alcohol was combined with gelatin to provide biocompatible electrospun binary nanofiber mats. AgNPs were added to the polyvinyl alcohol/gelatin mixture to obtain ternary nanofiber-AgNPs mats. Binary and ternary nanofiber mats were characterized by scanning electron microscopy before being applied as wound dressings in vivo. Subsequently, wound healing was evaluated. RESULTS: Both nanofiber/nanofiber-AgNPs mats improved the microscopic quality of the healed skin, albeit without obvious acceleration of the healing rate. As well, both types of nanofiber mats were able to combat microbial invasion into the wound bed. CONCLUSIONS: Both binary polyvinyl alcohol/gelatin and ternary polyvinyl alcohol/gelatin/AgNPs nanofiber mats developed in the present study depicted similar regenerative and antimicrobial potential when applied as full-thickness wound dressing. However, in comparison to the binary nanofiber mats, no obvious synergistic effect was observed after loading nanofibers with AgNPs.

Acceleration of Alveolar Ridge Augmentation Using a Low Dose of Recombinant Human Bone Morphogenetic Protein-2 Loaded on a Resorbable Bioactive Ceramic.

PURPOSE: The aim of the present study was to evaluate the effect of a porous silica-calcium phosphate composite (SCPC50) loaded with and without recombinant human bone morphogenetic protein-2 (rhBMP-2) on alveolar ridge augmentation in saddle-type defects. MATERIALS AND METHODS: Micro-granules of SCPC50 resorbable bioactive ceramic were coated with rhBMP-2 10 mg and then implanted into a saddle-type defect (12 × 7 mm) in a dog mandible and covered with a collagen membrane. Control groups included defects grafted with SCPC50 granules without rhBMP-2 and un-grafted defects. Bone healing was evaluated at 8 and 16 weeks using histologic and histomorphometric techniques. The increase in bone height and total defect fill were assessed for each specimen using the ImageJ 1.46 program. The release kinetics of rhBMP-2 was determined in vitro. The height of the bone in the grafted defects and the total defect fill were statistically analyzed. RESULTS: SCPC50 enhanced alveolar ridge augmentation as indicated by the increased vertical bone height, bone surface area, and bone volume after 16 weeks. SCPC50-rhBMP-2 provided a sustained release profile of a low effective dose (BMP-2 4.6 ± 1.34 pg/mL per hour) during the 1- to 21-day period. The slow rate of release of rhBMP-2 from SCPC50 accelerated synchronized complete bone regeneration and graft material resorption in 8 weeks. Successful rapid reconstruction of the alveolar ridge by SCPC50 and SCPC50-rhBMP-2 occurred without any adverse excessive bone formation, inflammation, or fluid-filled voids. CONCLUSIONS: Results of this study suggest that SCPC50 is an effective graft material to preserve the alveolar ridge after tooth extraction. Coating SCPC50-rhBMP-2 further accelerated bone regeneration and a considerable increase in vertical bone height. These findings make SCPC50 the primary choice as a carrier for rhBMP-2. SCPC50-rhBMP-2 can serve as an alternative to autologous bone grafting.

Preservation and regeneration of alveolar bone by tissue-engineered implants.

Bone maintenance after dental extraction has a significant impact on the success of future treatment. The purpose of this study was to regenerate bone by implanting an engineered porous scaffold seeded with bone marrow mesenchymal stem cells (BMSCs) in a socket created by extraction of the lower left central incisor in rabbits, utilizing the principles of tissue engineering. It involved preparation and characterization of three-dimensional porous hollow root form scaffolds consisting of a poly-L-lactic acid:polyglycolic acid composite (PLG, 50:50), using a solvent casting/compression molding/particulate leaching technique. Porosity of the scaffolds was 83.71% with good interconnectivity and uniform distribution of the various pore sizes. The degraded scaffolds maintained their porosity and form for the first 2 weeks and their mass loss continued up to 6 weeks. The scaffolds developed viscoelastic behavior under dynamic compression; yet they lost their mechanical characteristics as they degraded. The scaffolds were seeded with BMSCs and examined by scanning electron microscopy. Cell proliferation and scaffold degradation were shown up to 2 weeks in vitro. The cultivated scaffolds were implanted in empty extraction sockets immediately after tooth removal. Four weeks later, bone regeneration was evaluated histologically in the healed sockets in three experimental groups: sockets left empty, sockets that received PLG without cells, and sockets that received PLG with cells. Radiographic evaluation, performed 4 weeks later for the three experimental groups, demonstrated preservation of alveolar bone walls in the extraction sockets that received PLG with cells as compared with the other two groups. The bone density profile for the healed sockets confirmed both histological and radiographic findings. The results of this study show promise in the area of dentoalveolar surgery, yet longitudinal studies under variable clinical situations would encourage the current application.

Fabrication of polymer root form scaffolds to be utilized for alveolar bone regeneration.

Engineering dental tissues and organs is primarily motivated by a clinical need to restore these lost or diseased structures, in contrast to the use of harvested tissue. The present work focused on designing and characterizing scaffolds suitable for cultivation and implantation into the fresh extraction sockets of teeth, for the purpose of alveolar bone regeneration at a rate and quality higher than that of normal tissue healing for subsequent treatment with dental implants. Three-dimensional hollow root form scaffolds were prepared from poly-L-lactic acid/polyglycolic acid composites (50/50, 65/35, and 75/25 ratios), using the solvent casting compression molding particulate leaching technique. Two different salt particle sizes were used, 150-180 and 180-300 microm, to effect porogenesis. The scaffolds were characterized in vitro and in vivo. The highest percent porosity recorded was 75% with interconnectivity shown by scanning electron microscopy. The scaffolds demonstrated viscoelastic behavior and average strain in response to both static and dynamic forces that were suitable for them under bite-force magnitude anteriorly. The degradation of the root scaffolds depended on composite type, and on salt particle size. Tissue reaction favored samples made with large salt particle size.