Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Más filtros












Base de datos
Intervalo de año de publicación
1.
ACS Appl Mater Interfaces ; 15(28): 33784-33796, 2023 Jul 19.
Artículo en Inglés | MEDLINE | ID: mdl-37409649

RESUMEN

Intrinsically stretchable organic light-emitting diodes (is-OLEDs) have attracted significant attention for use in next-generation displays. However, most studies conducted to date have focused on how to make fluorescent materials stretchable, utilizing singlet excitons with a theoretical internal quantum efficiency (IQE) of 25%. Although phosphorescent materials have a high theoretical IQE of 100%, no previous work has attempted to develop stretchable phosphorescent light-emitting materials. In this work, we designed a solution-processable and intrinsically stretchable phosphorescent light-emitting layer (isp-EML) by blending various additives together with a mixture of a polymer host, poly(9-vinyl carbazole) (PVK), and a small-molecule emitting dopant, tris(2-phenylpyridine)iridium(III) (Ir(ppy)3). The poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (PEG-PPG-PEG) additive significantly improved the stretchability (∼100% strain), brightness (∼5400 cd/m2), and efficiency (∼25.3 cd/A) of the isp-EML compared with a conventional phosphorescent EML (approximately 3% strain, 3750 cd/m2, and 12.1 cd/A). Furthermore, by changing the emitting dopant in the isp-EML, we could control the red, green, and blue emission colors, with increasing mechanical and electrical properties of the isp-EML. These results highlight the promising potential of the novel blend system using phosphorescent materials and additives for application in highly stretchable and efficient OLEDs.

2.
Sci Rep ; 13(1): 5773, 2023 04 08.
Artículo en Inglés | MEDLINE | ID: mdl-37031263

RESUMEN

For multifunctional wearable sensing systems, problems related to wireless and continuous communication and soft, noninvasive, and disposable functionality issues should be solved for precise physiological signal detection. To measure the critical transitions of pressure, temperature, and skin impedance when continuous pressure is applied on skin and tissue, we developed a sensor for decubitus ulcers using conventional analog circuitry for wireless and continuous communication in a disposable, breathable fabric-based multifunctional sensing system capable of conformal contact. By integrating the designed wireless communication module into a multifunctional sensor, we obtained sensing data that were sent sequentially and continuously to a customized mobile phone app. With a small-sized and lightweight module, our sensing system operated over 24 h with a coin-cell battery consuming minimum energy for intermittent sensing and transmission. We conducted a pilot test on healthy subjects to evaluate the adequate wireless operation of the multifunctional sensing system when applied to the body. By solving the aforementioned practical problems, including those related to wireless and continuous communication and soft, noninvasive, and disposable functionality issues, our fabric-based multifunctional decubitus ulcer sensor successfully measured applied pressure, skin temperature, and electrical skin impedance.


Asunto(s)
Úlcera por Presión , Dispositivos Electrónicos Vestibles , Humanos , Úlcera por Presión/diagnóstico , Tecnología Inalámbrica , Textiles , Piel , Monitoreo Fisiológico
3.
Biosens Bioelectron ; 215: 114555, 2022 Nov 01.
Artículo en Inglés | MEDLINE | ID: mdl-35863135

RESUMEN

Monitoring biosignals at the skin interface is necessary to suppress the potential for decubitus ulcers in immobile patients confined to bed. We develop conformally contacted, disposable, and breathable fabric-based electronic devices to detect skin impedance, applied pressure, and temperature, simultaneously. Based on the experimental evaluation of the multifunctional sensors, a combination of robust AgNW electrodes, soft ionogel capacitive pressure sensor, and resistive temperature sensor on fabric provides alarmed the initiation of early-stage decubitus ulcers without signal distortion under the external stimulus. For clinical verification, an animal model is established with a pair of magnets to mimic a human decubitus ulcers model in murine in vivo. The evidence of pressure-induced ischemic injury is confirmed with the naked eye and histological and molecular biomarker analyses. Our multifunctional integrated sensor detects the critical time for early-stage decubitus ulcer, establishing a robust correlation with the biophysical parameters of skin ischemia and integrity, including temperature and impedance.


Asunto(s)
Técnicas Biosensibles , Úlcera por Presión , Animales , Impedancia Eléctrica , Humanos , Ratones , Úlcera por Presión/diagnóstico , Piel , Textiles
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...