Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 16 de 16
Filtrar
Más filtros












Base de datos
Intervalo de año de publicación
1.
ACS Appl Mater Interfaces ; 16(35): 46421-46432, 2024 Sep 04.
Artículo en Inglés | MEDLINE | ID: mdl-39091187

RESUMEN

Nanostructured lead telluride PbTe is among the best-performing thermoelectric materials, for both p- and n-types, for intermediate temperature applications. However, the fabrication of power-generating modules based on nanostructured PbTe still faces challenges related to the stability of the materials, especially nanoprecipitates, and the bonding of electric contacts. In this study, in situ high-temperature transmission electron microscopy observation confirmed the stability of nanoprecipitates in p-type Pb0.973Na0.02Ge0.007Te up to at least ∼786 K. Then, a new architecture for a packaged module was developed for improving durability, preventing unwanted interaction between thermoelectric materials and electrodes, and for reducing thermal stress-induced crack formation. Finite element method simulations of thermal stresses and power generation characteristics were utilized to optimize the new module architecture. Legs of nanostructured p-type Pb0.973Na0.02Ge0.007Te (maximum zT ∼ 2.2 at 795 K) and nanostructured n-type Pb0.98Ga0.02Te (maximum zT ∼ 1.5 at 748 K) were stacked with flexible Fe-foil diffusion barrier layers and Ag-foil-interconnecting electrodes forming stable interfaces between electrodes and PbTe in the packaged module. For the bare module, a maximum conversion efficiency of ∼6.8% was obtained for a temperature difference of ∼480 K. Only ∼3% reduction in output power and efficiency was found after long-term operation of the bare module for ∼740 h (∼31 days) at a hot-side temperature of ∼673 K, demonstrating good long-term stability.

2.
ACS Appl Mater Interfaces ; 16(9): 11637-11645, 2024 Mar 06.
Artículo en Inglés | MEDLINE | ID: mdl-38408287

RESUMEN

In thermoelectric and other inorganic materials research, the significance of half-Heusler (HH) compositions following the 18-electron rule has drawn interest in developing and exploiting the potential of intermetallic compounds. For the fabrication of thermoelectric modules, in addition to high-performance materials, having both p- and n-type materials with compatible thermal expansion coefficients is a prerequisite for module development. In this work, the p-type to n-type transition of valence balanced/unbalanced HH composition of Mg1-xVxNiSb was demonstrated by changing the Mg:V chemical ratio. The Seebeck coefficient and power factor of Ti-doped Mg0.57V0.33Ti0.1NiSb are -130 µV K-1 and 0.4 mW m-1 K-2 at 400 K, respectively. In addition, the reduced lattice thermal conductivity (κL < 2.5 W m-1 K-1 at 300 K) of n-type compositions was reported to be much smaller than κL of conventional HH materials. As high thermal conductivity has long been an issue for HH materials, the synthesis of p- and n-type Mg1-xVxNiSb compositions with low lattice thermal conductivity is a promising strategy for producing high-performance HH compounds. Achieving both p- and n-type materials from similar parent composition enabled us to fabricate a thermoelectric module with maximum output power Pmax ∼ 63 mW with a temperature difference of 390 K. This finding supports the benefit of exploring the huge compositional space of valence balanced/unbalanced quaternary HH compositions for further development of thermoelectric devices.

3.
Inorg Chem ; 60(15): 11364-11373, 2021 Aug 02.
Artículo en Inglés | MEDLINE | ID: mdl-34269565

RESUMEN

Copper-based sulfides are promising materials for thermoelectric applications, which can convert waste heat into electricity. This study reports the enhanced thermoelectric performance of Cu26V2Ge6S32 colusite via substitution of antimony (Sb) for germanium (Ge) and introduction of copper (Cu) as an interstitial atom. The crystal structure of the solid solutions and Cu-rich compounds were analyzed by powder X-ray diffraction and scanning transmission electron microscopy. Both chemical approaches decrease the hole carrier concentration, which leads to a reduction in the electronic thermal conductivity while keeping the thermoelectric power factor at a high value. Furthermore, the interstitial Cu atoms act as phonon scatterers, thereby decreasing the lattice thermal conductivity. The combined effects increase the dimensionless thermoelectric figure of merit ZT from 0.3 (Cu26V2Ge6S32) to 0.8 (Cu29V2Ge5SbS32) at 673 K.

4.
Ultramicroscopy ; 228: 113316, 2021 Sep.
Artículo en Inglés | MEDLINE | ID: mdl-34119806

RESUMEN

A new method of non-destructive sub-surface interfacial characterisation has been developed recently, which can be useful for quality assurance of a buried interface in nanoelectronic devices, such as magnetic random access memory. Since the cell size of these devices have been reducing their sizes, it is important to evaluate the resolution of the non-destructive imaging. A sub nanometric layer of different materials such as W and Pt was grown underneath a capping layer with controlled thickness for the evaluation of their sizes in this study. This provides systematic experimental data to show that the technique is capable to resolve down to approximately 2 nm in the plane, which is sufficient for the device imaging.

5.
J Am Chem Soc ; 142(36): 15464-15475, 2020 Sep 09.
Artículo en Inglés | MEDLINE | ID: mdl-32786772

RESUMEN

Many monumental breakthroughs in p-type PbTe thermoelectrics are driven by optimizing a Pb0.98Na0.02Te matrix. However, recent works found that x > 0.02 in Pb1-xNaxTe further improves the thermoelectric figure of merit, zT, despite being above the expected Na solubility limit. We explain the origins of improved performance from excess Na doping through computation and experiments on Pb1-xNaxTe with 0.01 ≤ x ≤ 0.04. High temperature X-ray diffraction and Hall carrier concentration measurements show enhanced Na solubility at high temperatures when x > 0.02 but no improvement in carrier concentration, indicating that Na is entering the lattice but is electrically compensated by high intrinsic defect concentrations. The higher Na concentration leads to band convergence between the light L and heavy Σ valence bands in PbTe, suppressing bipolar conduction and increasing the Seebeck coefficient. This results in a high temperature zT nearing 2 for Pb0.96Na0.04Te, ∼25% higher than traditionally reported values for pristine PbTe-Na. Further, we apply a phase diagram approach to explain the origins of increased solubility from excess Na doping and offer strategies for repeatable synthesis of high zT Na-doped materials. A starting matrix of simple, high performing Pb0.96Na0.04Te synthesized following our guidelines may be superior to Pb0.98Na0.02Te for continued zT optimization in p-type PbTe materials.

6.
ACS Omega ; 5(22): 13006-13013, 2020 Jun 09.
Artículo en Inglés | MEDLINE | ID: mdl-32548485

RESUMEN

The misfit monolayered sulfides, (GdS)1.20NbS2, (DyS)1.22NbS2, (Gd0.1Dy0.9S)1.21NbS2, (Gd0.2Dy0.8S)1.21NbS2, and (Gd0.5Dy0.5S)1.21NbS2 and the misfit bilayered sulfide (GdS)0.60NbS2 were synthesized via sulfurization under flowing CS2/H2S gas and consolidated by pressure-assisted sintering. The thermoelectric properties of the monolayered and bilayered sulfides perpendicular (in-plane) and parallel (out-of-plane) to the pressing direction were investigated over a temperature range of 300-873 K. The crystal grains in all the sintered samples were preferentially oriented perpendicular to the pressing direction, which resulted in highly anisotropic electrical and thermal transport properties. All the sintered samples exhibited degenerate n-type semiconductor-like behavior, leading to a large thermoelectric power factor. The misfit layered structure yielded low lattice thermal conductivity. The evolution of the monolayered structures into bilayered structures affected their thermoelectric properties. The thermoelectric figure of merit (ZT) of monolayered (GdS)1.20NbS2 was higher than that of bilayered (GdS)0.60NbS2 due to the larger power factor and lower lattice thermal conductivity of (GdS)1.20NbS2. The lattice thermal conductivity of the monolayered sulfide was lower in (Gd x Dy1-x S)1.2+q NbS2 solid solutions. The large power factor and low lattice thermal conductivity allowed a ZT value of 0.13 at 873 K in (Gd0.5Dy0.5S)1.21NbS2 perpendicular to the pressing direction.

7.
Langmuir ; 35(49): 16335-16340, 2019 Dec 10.
Artículo en Inglés | MEDLINE | ID: mdl-31715104

RESUMEN

Here, we report a method for facile gram-scale synthesis of tetrahedrite (Cu12Sb4S13) nanoparticles (NPs) with high quality and good reproducibility. The obtained NPs had a well-defined tetrahedral shape with a mean edge length of ∼70 nm. We sintered the NPs by the hot press technique to fabricate a nanostructured pellet for thermoelectric measurements. The figure of merit (ZT) value of the pellet was 0.52 at 675 K, which was comparable with the ZT value of the non-nanostructured counterpart.

8.
Science ; 365(6460): 1418-1424, 2019 09 27.
Artículo en Inglés | MEDLINE | ID: mdl-31604269

RESUMEN

Thermoelectric technology allows conversion between heat and electricity. Many good thermoelectric materials contain rare or toxic elements, so developing low-cost and high-performance thermoelectric materials is warranted. Here, we report the temperature-dependent interplay of three separate electronic bands in hole-doped tin sulfide (SnS) crystals. This behavior leads to synergistic optimization between effective mass (m*) and carrier mobility (µ) and can be boosted through introducing selenium (Se). This enhanced the power factor from ~30 to ~53 microwatts per centimeter per square kelvin (µW cm-1 K-2 at 300 K), while lowering the thermal conductivity after Se alloying. As a result, we obtained a maximum figure of merit ZT (ZT max) of ~1.6 at 873 K and an average ZT (ZT ave) of ~1.25 at 300 to 873 K in SnS0.91Se0.09 crystals. Our strategy for band manipulation offers a different route for optimizing thermoelectric performance. The high-performance SnS crystals represent an important step toward low-cost, Earth-abundant, and environmentally friendly thermoelectrics.

9.
ACS Omega ; 4(15): 16402-16408, 2019 Oct 08.
Artículo en Inglés | MEDLINE | ID: mdl-31616818

RESUMEN

Direct energy conversion of heat into electricity using thermoelectric materials is an attractive solution to help address global energy issues. Developing novel materials composed of earth-abundant and nontoxic elements will aid progress toward the goal of sustainable thermoelectric materials. In this study, we chemically synthesized Cu-Zn-Sn-S nanocrystals and fabricated a Cu3ZnSnS5-y thermoelectric material using nanocrystals as building blocks. The figure-of-merit (ZT) value of the Cu3ZnSnS5-y material was found to be 0.39 at 658 K. We substituted Zn with Al in the Cu3ZnSnS5-y system to form Cu3Zn1-x Al x SnS5-y (x = 0.25, 0.5, 0.75, and 1) to lower the lattice thermal conductivity of the resulting materials. Complete substitution of Al for Zn substantially decreased the lattice thermal conductivity and dramatically increased the electrical conductivity of the material. However, the ZT value could not be significantly enhanced, which could be primarily attributed to the high carrier thermal conductivity. These results highlight the production of Cu3Zn1-x Al x SnS5-y thermoelectric materials and unveil the scope for improvement of ZT values by altering transport properties.

10.
Philos Trans A Math Phys Eng Sci ; 377(2152): 20180450, 2019 Aug 26.
Artículo en Inglés | MEDLINE | ID: mdl-31280713

RESUMEN

Thermoelectric technology offers the opportunity of direct conversion between heat and electricity, and new and exciting materials that can enable this technology to deliver higher efficiencies have been developed in recent years. This mini-review covers the most promising advances in thermoelectric materials as they pertain to their potential in being implemented in devices and modules with an emphasis on thermoelectric power generation. Classified into three groups in terms of their operating temperature, the thermoelectric materials that are most likely to be used in future devices are briefly discussed. We summarize the state-of-the-art thermoelectric modules/devices, among which nanostructured PbTe modules are particularly highlighted. At the end, key issues and the possible strategies that can help thermoelectric power generation technology move forward are considered. This article is part of a discussion meeting issue 'Energy materials for a low carbon future'.

11.
Inorg Chem ; 58(2): 1425-1432, 2019 Jan 22.
Artículo en Inglés | MEDLINE | ID: mdl-30620579

RESUMEN

We report the preparations, thermoelectric and magnetic properties, and electronic structures of Cu-Ti-S systems, namely, cubic thiospinel c-Cu1- xTi2S4 ( x ≤ 0.375), a derivative cubic and Ti-rich phase c-Cu1- xTi2.25S4 ( x = 0.5, 0.625), and a rhombohedral phase r-CuTi2S4. All samples have the target compositions except for r-CuTi2S4, whose actual composition is Cu1.14Ti1.80S4. All of the phases have n-type metallic character and exhibit Pauli paramagnetism, as proven by experiments and first-principles calculations. The Cu and Ti deficiencies in c-Cu1- xTi2S4 and r-CuTi2S4, respectively, decrease the electron-carrier concentration, whereas the "excess" of Ti ions in c-Cu1- xTi2.25S4 largely increases it. For r-CuTi2S4, the reduced carrier concentration increases the electrical resistivity and Seebeck coefficient, leading to the highest thermoelectric power factor of 0.5 mW K-2 m-1 at 670 K. For all of the Cu-Ti-S phases, the thermal conductivity at 670 K is 3.5-5 W K-1 m-1, where the lattice part of the conductivity is as low as 1 W K-1 m-1 at 670 K. As a result, r-CuTi2S4 shows the highest dimensionless thermoelectric figure of merit ZT of 0.2. The present systematic study on the Cu-Ti-S systems provides insights into the structural design of thermoelectric materials based on Cu-M-S (M = transition-metal elements).

12.
J Am Chem Soc ; 140(6): 2186-2195, 2018 02 14.
Artículo en Inglés | MEDLINE | ID: mdl-29332398

RESUMEN

High-performance thermoelectric bulk sulfide with the colusite structure is achieved by controlling the densification process and forming short-to-medium range structural defects. A simple and powerful way to adjust carrier concentration combined with enhanced phonon scattering through point defects and disordered regions is described. By combining experiments with band structure and phonons calculations, we elucidate, for the first time, the underlying mechanism at the origin of intrinsically low thermal conductivity in colusite samples as well as the effect of S vacancies and antisite defects on the carrier concentration. Our approach provides a controlled and scalable method to engineer high power factors and remarkable figures of merit near the unity in complex bulk sulfide such as Cu26V2Sn6S32 colusites.

13.
Phys Chem Chem Phys ; 19(13): 8874-8879, 2017 Mar 29.
Artículo en Inglés | MEDLINE | ID: mdl-28294254

RESUMEN

The synthetic tetrahedrites Cu12-yTrySb4S13 (Tr: Mn, Fe, Co, Ni, Zn) have been extensively studied due to interest in metal-semiconductor transition as well as in superior thermoelectric performance. We have prepared Ge- and Sn-bearing tetrahedrites, Cu12-xMxSb4S13 (M = Ge, Sn; x ≤ 0.6), and investigated the effects of the substitutions on the phase transition and the thermoelectric properties. The substitutions of Ge and Sn for Cu suppress the metal-semiconductor transition and increase the electrical resistivity ρ and the positive thermopower S. This finding suggests that the phase transition is prevented by electron doping into the unoccupied states of the valence band. The variations of ρ, S, and magnetic susceptibility for the present systems correspond well with those for the system with Tr = Zn2+, confirming the tetravalent states for Ge and Sn. The substitution of M4+ for Cu1+ decreases the power factor S2/ρ but enhances the dimensionless thermoelectric figure of merit ZT, due to reductions in both the charge carrier contribution and lattice contribution to the thermal conductivity. As a result, ZT has a maximum value of ∼0.65 at 665 K for x = 0.3-0.5 in Cu12-xMxSb4S13 with M = Ge and Sn.

14.
Rev Sci Instrum ; 86(4): 045103, 2015 Apr.
Artículo en Inglés | MEDLINE | ID: mdl-25933893

RESUMEN

Thermoelectric efficiency measurements were carried out on n-type bismuth telluride legs with the hot-side temperature at 100 and 150°C. The electric power and heat flow were measured individually. Water coolant was utilized to maintain the cold-side temperature and to measure heat flow out of the cold side. Leg length and vacuum pressure were studied in terms of temperature difference across the leg, open-circuit voltage, internal resistance, and heat flow. Finite-element simulation on thermoelectric generation was performed in COMSOL Multiphysics, by inputting two-side temperatures and thermoelectric material properties. The open-circuit voltage and resistance were in good agreement between the measurement and simulation. Much larger heat flows were found in measurements, since they were comprised of conductive, convective, and radiative contributions. Parasitic heat flow was measured in the absence of bismuth telluride leg, and the conductive heat flow was then available. Finally, the maximum thermoelectric efficiency was derived in accordance with the electric power and the conductive heat flow.

15.
Materials (Basel) ; 8(3): 1124-1149, 2015 Mar 16.
Artículo en Inglés | MEDLINE | ID: mdl-28787992

RESUMEN

Sulfides are promising candidates for environment-friendly and cost-effective thermoelectric materials. In this article, we review the recent progress in all-length-scale hierarchical architecturing for sulfides and chalcogenides, highlighting the key strategies used to enhance their thermoelectric performance. We primarily focus on TiS2-based layered sulfides, misfit layered sulfides, homologous chalcogenides, accordion-like layered Sn chalcogenides, and thermoelectric minerals. CS2 sulfurization is an appropriate method for preparing sulfide thermoelectric materials. At the atomic scale, the intercalation of guest atoms/layers into host crystal layers, crystal-structural evolution enabled by the homologous series, and low-energy atomic vibration effectively scatter phonons, resulting in a reduced lattice thermal conductivity. At the nanoscale, stacking faults further reduce the lattice thermal conductivity. At the microscale, the highly oriented microtexture allows high carrier mobility in the in-plane direction, leading to a high thermoelectric power factor.

16.
Materials (Basel) ; 8(9): 6482-6483, 2015 Sep 21.
Artículo en Inglés | MEDLINE | ID: mdl-28793576

RESUMEN

The authors wish to make the following corrections to this paper [1]. [...].

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...