RESUMEN
The synthesis and characterization of a hydrochar/CeO2 composite along with its evaluation in methylene blue degradation under visible light are presented. The methodology consisted of a single-pass hydrothermal method, having as synthesis conditions 9 h of reaction time, 210 °C, autogenous pressure, and a biomass/CeO2 ratio of 100:1. The composite characterization revealed good dispersion of CeO2 in the carbonaceous matrix and significant synergy in the composite activation using visible irradiation. The photodegradation experiments showed an efficiency of 98% for white LED light, 91% for UV light, 96% for solar irradiation, and 85% for blue LED light using as conditions pH 7.0, 50 mg of composite, 50 mL of solution, 10 mg/L of dye initial concentration, and 120 min of contact time. Meanwhile, the reusability experiments evidenced a reuse capacity of up to five times with a constant photodegradation efficiency (99%); moreover, it was determined that the presence of electrolytes at pH below 7.0 during degradation negatively affected methylene blue degradation. Finally, the results of this work demonstrate that the hydrochar/CeO2 composite can be synthesized by a green method and used for the efficient treatment of water contaminated with methylene blue.
Asunto(s)
Luz , Azul de Metileno , Azul de Metileno/química , Rayos Ultravioleta , Fotólisis , Luz AzulRESUMEN
Endodontic infections involve a multispecies biofilm, making it difficult to choose an antimicrobial treatment. Characteristics such as the pathogens involved and number of microorganisms, nutrients, material surface to develop the biofilm, flow and oxygenation conditions are important for biofilm development using in vitro models. OBJECTIVE: To develop a standardized biofilm model, which replicates the main features (chemical, microbiological, and topographical) of an infected root canal tooth to detect components as treatment target. DESIGN: Clinical strains of Enterococcus faecalis, Candida albicans, and Actinomyces israelii were isolated, and a multispecies biofilm was developed using continuous laminar flow reactors under anaerobic conditions in human dental roots. The microbiological composition was determined by counting colony-forming units and scanning electron microscope micrographs. In addition, the chemical composition of the exopolymeric matrix was determined by vibrational Raman spectroscopy and liquid chromatography of biofilm supernatant treated with enzyme. RESULTS: E. faecalis turned out to be the main microorganism in mature biofilm, this was related to the presence of ß-galactosidase detected by vibrational Raman spectroscopy. After the enzymatic treatment of the extracellular polymeric substance, the presence of mannose and glucose was established. CONCLUSIONS: The present work contributes to better understanding of standard conditions to develop a multispecies biofilm in human dental roots, which could have an impact on the generation of new root canal disinfection techniques in endodontic pathologies.
Asunto(s)
Matriz Extracelular de Sustancias Poliméricas , Tratamiento del Conducto Radicular , Humanos , Tratamiento del Conducto Radicular/métodos , Cavidad Pulpar/microbiología , Biopelículas , Enterococcus faecalis , Irrigantes del Conducto RadicularRESUMEN
The covalent modification of the metallic phase of MoS2 with a Hamilton-type ligand is presented, transforming MoS2 to a recognition platform which is able to embrace barbiturate moieties via hydrogen bonding. The successful hydrogen bonding formation is easily monitored by simple electrochemical assessments, if a ferrocene-labeled barbiturate analogue is utilized as a proof of concept. Full spectroscopic, thermal, and electron microscopy imaging characterization is provided for the newly formed recognition system, along with valuable insights concerning the electrochemical sensing. The given methodology expands beyond the sensing applications, confidently entering the territory of supramolecular interactions on the surface of 2D transition metal dichalcogenides. The well-designed host-guest chemistry presented herein, constitutes a guide and an inspiration for hosting customized-structured functional building blocks on MoS2 and its relatives via hydrogen bonding, opening up new opportunities regarding potential applications.
RESUMEN
Highly performing, non-metal inexpensive electrocatalysts for the production of hydrogen via electrochemical water splitting are called for the replacement of current platinum-based ones. In order to speed up the electrocatalytic hydrogen evolution, abundant active sites but also efficient charge transfer is needed. In this context, 0D carbon dots (CDs) with large specific surface area, low cost, high conductivity, and rich functional groups emerge as promising non-metal electrocatalysts. Additionally, the use of conductive substrates provides an effective strategy to boost their electrocatalytic performance. Herein, the unique 3D superstructure of carbon nanohorns (CNHs), as well as without any metal content in their structure, is used to provide a conductive support of high porosity, large specific surface area, and good electrical conductivity, for the in situ growth and immobilization of CDs, via a simple hydrothermal method. The direct contact of CDs with the 3D conductive network of CNHs promotes charge transfer, accelerating hydrogen evolution. The all-carbon non-metal CDs/CNHs nanoensembleshows an onset potential close to the one of Pt/C, low charge transfer resistance, and excellent stability.
RESUMEN
PURPOSE: To demonstrate the usefulness of sialic acid (SA) in saliva as a biomarker for breast cancer (BC) and develop a new tool for early detection. METHODS: Considering that the amount of SA in human saliva is limited, the levels of SA were measured using surface-enhanced Raman spectroscopy (SERS) with tailored citrate-reduced silver nanoparticles. We calibrated the spectrum using analytical reagent SA. The 164 patients included in this study were undergoing screening mammography and/or ultrasound testing. The SA test was performed in the absence of previous information regarding the health of the subjects. Biopsies were performed to determine the diagnosis of cancer condition. The biopsy studies determined that 35 patients are BC affected and 129 gave negative results. RESULTS: SERS showed a sensitivity and specificity of 80 and 93%, respectively. The cut-off value for SA (12.5 mg/dL) was established through a receiver operating characteristic (ROC) curve analysis. The area under the curve of the ROC analysis resulted in 95% with this SA level cut-off. Our results suggest that SA may be a useful biomarker for the screening of breast cancer in women. CONCLUSIONS: Our results suggest that the SA levels measured from saliva may be highly sensitive and specific markers for the presence of breast cancer.
Asunto(s)
Neoplasias de la Mama/diagnóstico , Detección Precoz del Cáncer/métodos , Tamizaje Masivo/métodos , Ácido N-Acetilneuramínico/análisis , Saliva/química , Adulto , Anciano , Anciano de 80 o más Años , Biomarcadores/análisis , Femenino , Humanos , Mamografía , Persona de Mediana Edad , Sensibilidad y Especificidad , Espectrometría Raman , Adulto JovenRESUMEN
In this paper, we report a fast and easy method to detect histamine dihydrochloride using gold nanostars in colloidal aqueous solution as a highly active SERS platform with potential applications in biomedicine and food science. This colloid was characterized with SEM and UVâ»Vis spectroscopy. Also, numerical calculations were performed to estimate the plasmonic resonance and electric field amplification of the gold nanoparticles to compare the difference between nanospheres and nanostars. Finally, aqueous solutions of histamine dihydrochloride were prepared in a wide range of concentrations and the colloid was added to carry out SERS. We found SERS amplified the Raman signal of histamine by an enhancement factor of 1 . 0 × 10 7 , demonstrating the capability of the method to detect low concentrations of this amine molecule.
RESUMEN
We report the synthesis of MWNT/ZnO hybrid nanostructures. A simple, affordable, chemical procedure to functionalize MWNTs with ZnO nanoparticles was performed. A significant portion of the surface of MWNTs was covered with ZnO nanoparticles; these particles formed highly porous spherical nodules of 50-150 nm in diameter, sizes that are an order of magnitude larger than similar ZnO nanonodules reported in the literature. Hence, the self-assembled nanocomposite the ZnO exhibited a large surface-to-volume ratio, which is a very advantageous property for potential catalytic applications. The resultant MWNT/ZnO nanocomposites were characterized by x-ray diffraction, scanning and high-resolution transmission electron microscopy, and UV-vis and Raman spectroscopy. The temperature coefficient of resistance (TCR) of the nanocomposites was measured and reported. The average TCR value goes from -5.6%/K up to -18%/K, over temperature change intervals from 10 K to 1 K. Based on these TCR results, the nanocomposite MWNT/ZnO prepared in this work is a promising material, with potential application as a bolometric sensor.