Multielemental analysis in vegetable edible oils by inductively coupled plasma mass spectrometry after solubilisation with tetramethylammonium hydroxide.

Trace metals have negative effects on the oxidative stability of edible oils and they are important because of possibility for oils characterisation. A single-step procedure for trace elemental analysis of edible oils is presented. To this aim, a solubilisation with tetramethylammonium hydroxide (TMAH) was assayed prior to inductively coupled plasma mass spectrometry detection. Small amounts of TMAH were used, resulting in high elemental concentrations. This method was applied to edible oils commercially available in Argentine. Elements present in small amounts (Cu, Ge, Mn, Mo, Ni, Sb, Sr, Ti, and V) were determined in olive, corn, almond and sunflower oils. The limits of detection were between 0.004 µg g(-1) for Mn and Sr, and 0.32 µg g(-1) for Sb. Principal components analysis was used to correlate the content of trace metals with the type of oils. The two first principal components retained 91.6% of the variability of the system. This is a relatively simple and safe procedure, and could be an attractive alternative for quality control, traceability and routine analysis of edible oils.

Polymer-supported ionic liquid solid phase extraction for trace inorganic and organic mercury determination in water samples by flow injection-cold vapor atomic absorption spectrometry.

A simple and green technique named polymer-supported ionic liquid solid phase extraction (PSIL-SPE) was developed for mercury (Hg) species determination. Inorganic Hg (InHg) species was complexed with chloride ions followed by its introduction into a flow injection on-line system to quantitatively retain the anionic chlorocomplex (HgCl4(2-)) in a column packed with CYPHOS(®) IL 101-impregnated resin. The trapped InHg was then reduced with stannous chloride (SnCl2) and eluted with the same flow of reducing agent followed by cold vapor atomic absorption spectrometry (CV-AAS) detection. Organic mercury species (OrgHg) did not interact with the impregnated resin and were not retained into the column. Total concentration of OrgHg was evaluated by difference between total Hg and InHg concentration. A 95% extraction efficiency was achieved for InHg when the procedure was developed under optimal experimental conditions. The limit of detection obtained for preconcentration of 40 mL of sample was 2.4 ng L(-1) InHg. The relative standard deviation (RSD) was 2.7% (at 1 µg L(-1) InHg and n=10) calculated from the peak height of absorbance signals (Gaussian-shape and reproducible peaks). This work reports the first polymer-supported IL solid phase extraction approach implemented in a flow injection on-line system for determination of Hg species in mineral, tap and river water samples.

Rapid and sensitive HILIC-MS/MS analysis of carnitine and acetylcarnitine in biological fluids.

Monitoring carnitine and acetylcarnitine levels in biological fluids is a powerful tool for diagnostic studies. Research has recently shown that the analysis of carnitine and related compounds in clinical samples can be accomplished by different analytical approaches. Because of the polar and ionic nature of the analytes and matrix complexity, accurate quantitation is a highly challenging task. Thus, sample processing factors, preparation/cleanup procedures, and chromatographic/ionization/detection parameters were evaluated. On the basis of the results obtained, a rapid, selective, sensitive method based on hydrophilic interaction liquid chromatography-tandem mass spectrometry for the analysis of carnitine and acetylcarnitine in serum and urine samples is proposed. The matrix effect was assessed. The proposed approach was validated, the limits of detection were in the nanomolar range, and carnitine and acetylcarnitine levels were found within the micromolar range in both types of sample.

Sensitive determination of thallium species in drinking and natural water by ionic liquid-assisted ion-pairing liquid-liquid microextraction and inductively coupled plasma mass spectrometry.

A fast and simple method involving separation and determination of thallium (Tl) species, based on novel ionic liquid-assisted ion pairing dispersive liquid-liquid microextraction (DLLME) method, was developed. Initially, Tl(III) was selectively complexed with chloride ion to form [TlCl(4)](-) chlorocomplex. Subsequently, tetradecyl(trihexyl)phosphonium chloride ionic liquid (CYPHOS(®) IL 101) was used to form the ion-pair with [TlCl(4)](-) anion followed by extraction. The DLLME procedure was developed by dispersing 80 µL of carbon tetrachloride with 100 µL of ethanol added to the aqueous solution. After DLLME, the upper aqueous phase containing Tl(I) only was removed and analysed by inductively coupled plasma-mass spectrometry (ICP-MS). In contrast to Tl(III), Tl(I) species does not form neither stable nor anionic complexes with chloride ions and it was not extracted into the organic phase. Total Tl concentration was obtained by direct introduction of sample into ICP-MS instrument. The calibration graph for the analyte was linear with a correlation coefficient of 0.9989. Under optimal conditions, detection limit of Tl species was 0.4 ng L(-1). The relative standard deviation (n=10) at 1 ng mL(-1) Tl concentration level was 1.3% for Tl(I) and 1.5% for Tl(III). The method was successfully applied for fast speciation analysis of Tl at ultratrace levels in real water samples.

Arsenic speciation analysis in mono-varietal wines by on-line ionic liquid-based dispersive liquid-liquid microextraction.

A highly efficient separation and pre-concentration method for arsenic species determination, based on ionic liquid (IL) dispersive microextraction technique implemented in a flow analysis system, is proposed. Highly selective separation of arsenite species [As(III)] was achieved by chelation with sodium diethyldithiocarbamate (DDTC) followed by dispersion with 40 mg of 1-octyl-3-methylimidazolium hexafluorophosphate ([C(8)mim][PF(6)]) IL. Analyte extraction, retention and separation of IL phase were achieved with a packed microcolumn and As(III) was determined in eluent solution by electrothermal atomic absorption spectrometry (ETAAS). Concentration of As(V) was deduced by the difference between total inorganic arsenic and As(III). Thus, determination of total arsenic was performed by previous degradation of organo-arsenic species, followed by a reduction. Under optimal conditions, As(III) extraction efficiency was 100% and a sensitivity enhancement factor of 46 was obtained with only 4.0 ml of sample The method was successfully applied for arsenic speciation studies in mono-varietal wines.

Method development for Cd and Hg determination in biodiesel by electrothermal atomic absorption spectrometry with emulsion sample introduction.

A novel method for analysis of biodiesel by electrothermal atomic absorption spectrometry is described. This analytical strategy involves sample preparation as emulsions for routine and reliable determination of Cd and Hg. Several experimental conditions were investigated, including emulsion stability and composition, furnace temperature program and matrix modification. Different calibration strategies were also evaluated, being the analyte addition method preferred both for Cd and Hg. The accuracy was verified through comparison with an acid digestion in a microwave closed system. The injection repeatability was evaluated as the average relative standard deviation (R.S.D %) for five successive firings and was better than 4.4% for Cd and 5.4% Hg respectively. The detection limits, evaluated by the 3σ concept of calculation (n=10), were of 10.2 µg kg(-1) (0.9 µg L(-1)) for Hg and 0.3 µg kg(-1) (0.04 µg L(-1)) for Cd. This method was successfully applied to the determination of Cd and Hg in biodiesel samples obtained from local vendors.

Dispersive liquid-liquid microextraction and preconcentration of thallium species in water samples by two ionic liquids applied as ion-pairing reagent and extractant phase.

In the present work, a simple and highly sensitive analytical methodology for determination of Tl(+) and Tl(3+) species, based on the use of modern and non-volatile solvents, such as ionic liquids (ILs), was developed. Initially, Tl(+) was complexed by iodide ion at pH 1 in diluted sulfuric acid solution. Then, tetradecyl(trihexyl)phosphonium chloride ionic liquid (CYPHOS(®) IL 101) was used as ion-pairing reagent and a dispersive liquid-liquid microextraction (DLLME) procedure was developed by dispersing 60 mg of 1-hexyl-3-methylimidazolium hexafluorophosphate [C(6) mim][PF(6)] with 500 µL of ethanol in the aqueous solution. After the microextraction procedure was finished, the final IL phase was solubilized in methanol and directly injected into the graphite furnace of an electrothermal atomic absorption spectrometer (ETAAS). An extraction efficiency of 77% and a sensitivity enhancement factor of 100 were obtained with only 5.00 mL of sample. The limit of detection (LOD) was 3.3 ng L(-1) Tl while the relative standard deviation (RSD) was 5.3% (at 0.4 µg L(-1) Tl and n=10), calculated from the peak height of absorbance signals. The method was finally applied to determine Tl species in tap and river water samples after separation of Tl(3+) species. To the best of our knowledge, this work reports the first application of ILs for Tl extraction and separation in the analytical field.

A novel and rapid method for determination of natamycin in wines based on ultrahigh-performance liquid chromatography coupled to tandem mass spectrometry: validation according to the 2002/657/EC European decision.

A novel, simple, and rapid reversed-phase liquid chromatography-tandem mass spectrometric methodology was developed for the analysis of natamycin in wine samples. Natamycin was protonated to form singly charged ions in an electrospray positive ion mode. Data acquisition under MS/MS was achieved by applying multiple reaction monitoring (MRM) of three fragment ion transitions (666.3 → 648.2, 666.3 → 503.3, and 666.3 → 485.2) to provide a high degree of sensitivity and specificity. Chromatographic separation was performed on a rapid resolution column using a mobile phase consisting of an acetonitrile/water mixture with a total run time of 5.0 min. After only filtration as pretreatment, the sample was injected into the chromatographic system. The proposed method was validated in terms of selectivity, trueness, precision, decision limit (CCα), and detection capability (CCß) according to 2002/657/EC Commission decision. The values for trueness, reported as bias (%), agreed with those established by the aforementioned document. Repeatability (intraday variability) values were 12.37% at a concentration of 1.0 µg L(-1) and 8.99-4.19% at concentrations between 2.5 and 10 µg L(-1). The overall within-laboratory (interday variability) reproducibility was 15.47% at a concentration of 1.0 µg L(-1), which was significantly lower than the indicative value reported in the EU decision. The results indicated that the proposed approach is a sensitive, fast, reproducible, and robust methodology suitable for the analysis of natamycin levels in wine samples.

Analysis of nordihydroguaiaretic acid in Larrea divaricata Cav. extracts by micellar electrokinetic chromatography.

INTRODUCTION: Larrea divaricata Cav. is a common shrub used in folk medicine to treat a variety of diseases. The main product extracted from this bush is nordihydroguaiaretic acid (NDG), which is a potent antioxidant. OBJECTIVE: In this paper we propose a novel method for the quantification of NDG in different extracts of Larrea divaricata. The concentration of NDG in two different aqueous extracts (I and D) and an ethanolic extract (Eet) was analysed, in order to evaluate the safe use of the extracts for pharmacological purposes. METHODOLOGY: Micellar electrokinetic chromatography (MEKC) was performed under the following conditions: the background electrolyte used consisted of 20 mm phosphate buffer (pH 7.5), 10 mm sodium dodecyl sulphate and 10% acetonitrile. RESULTS: The limits of detection and quantitation of NDG were 4.54 × 10(-4) and 10.6 × 10(-4) mg/mL, respectively. The concentration of this acid in both aqueous extracts was within the safe levels. However, the decoction must be used carefully because the concentration of the acid was almost over the recommended limit. In the case of ethanolic extracts, the amount of NDG was above the safe concentration, which is in agreement with the solubility of the active compound in ethanol. CONCLUSIONS: The conclusions of this study demonstrate that most of these plant extracts should be used with care, especially those which are used with medicinal purposes. This is the first research on the quantification of NDG using MEKC in jarilla extracts.

Determination of beta-glucosidase activity in soils with a bioanalytical sensor modified with multiwalled carbon nanotubes.

Soil microorganisms and enzymes are the primary mediators of soil biological processes, including organic matter degradation, mineralization, and nutrient recycling. They play an important role in maintaining soil ecosystem quality and functional diversity. Moreover, enzyme activities can provide an indication of quantitative changes in soil organic matter. Beta-glucosidase (beta-Glu) activity has been found to be sensitive to soil management and has been proposed as a soil quality indicator because it provides an early indication of changes in organic matter status and its turnover. The aims of the present study were to test and use a simple and convenient procedure for the assay of beta-Glu activity in agricultural soil. The method described here is based on the enzymatic degradation of cellobiose by beta-Glu present in the soil sample and the subsequent determination of glucose produced by the enzymatic reaction using screen-printed carbon electrodes modified with multiwalled carbon nanotubes (SPCE-CNT) equipped with coimmobilized glucose oxidase and horseradish peroxidase enzymes. The potential applied to the SPCE-CNT detection was -0.15 V versus a Ag/AgCl pseudo-reference electrode. A linear calibration curve was obtained in the range 2.7-11.3 mM with a correlation coefficient. In the present study, an easy and effective SPCE-CNT-modified electrode allowed an improved amperometric response to be achieved and this is attributed to the increased surface area upon electrode modification.

Determination of the beta-glucosidase activity in different soils by pre capillary enzyme assay using capillary electrophoresis with laser-induced fluorescence detection.

Enzyme activities can provide indication for quantitative changes in soil organic matter (SOM). It is known that the activities of most enzymes increase as native SOM content reflecting larger microbial communities and stabilization of enzymes on humic materials. Beta-glucosidase (beta-Glu) activities have been frequently used as indicators of changes in quantity and quality of SOM. In this study we propose a simple and very sensitive method, which has lower limit of detection compared with classic spectrophotometric method with the aim of determinate the beta-Glu activity in soil samples using Fluorescein mono-beta-D-glucopyranoside (FMGlc) as a substrate. The fluorescein released by the enzymatic reaction was quantified by capillary electrophoresis-laser induced fluorescence (CE-LIF) method. The background electrolyte (BGE) consisted in 40 mM phosphate buffer, pH 6. The LOD and LOQ for fluorescein were 1.3 10(-7) mg mL(-1) and 6.4 10(-6) mg mL(-1), respectively. This work deals with the minimization of the mixture for the enzymatic reaction and with the optimization conditions of CE separation. To the best of our knowledge, this is the first time that an enzymatic activity was detected in soil using CE-LIF system.

On-line ionic liquid-based preconcentration system coupled to flame atomic absorption spectrometry for trace cadmium determination in plastic food packaging materials.

A novel on-line preconcentration method based on liquid-liquid (L-L) extraction with room temperature ionic liquids (RTILs) coupled to flame atomic absorption spectrometry (FAAS) was developed for cadmium determination in plastic food packaging materials. The methodology is based on the complexation of Cd with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) reagent after sample digestion followed by extraction of the complex with the RTIL 1-butyl-3-methylimidazolium hexafluorophosphate ([C(4)mim][PF(6)]). The mixture was loaded into a flow injection analysis (FIA) manifold and the RTIL rich-phase was retained in a microcolumn filled with silica gel. The RTIL rich-phase was then eluted directly into FAAS. A enhancement factor of 35 was achieved with 20 mL of sample. The limit of detection (LOD), obtained as IUPAC recommendation, was 6 ng g(-1) and the relative standard deviation (R.S.D.) for 10 replicates at 10 microg L(-1) Cd concentration level was 3.9%, calculated at the peak heights. The calibration graph was linear and a correlation coefficient of 0.9998 was achieved. The accuracy of the method was evaluated by both a recovery study and comparison of results with direct determination by electrothermal atomic absorption spectrometry (ETAAS). The method was successfully applied for Cd determination in plastic food packaging materials and Cd concentrations found were in the range of 0.04-10.4 microg g(-1).

Trace mercury determination in drinking and natural water samples by room temperature ionic liquid based-preconcentration and flow injection-cold vapor atomic absorption spectrometry.

A liquid-liquid extraction procedure (L-L) based on room temperature ionic liquid (RTIL) was developed for the preconcentration and determination of mercury in different water samples. The analyte was quantitatively extracted with 1-butyl-3-methylimidazolium hexafluorophosphate ([C(4)mim][PF(6)]) under the form of Hg-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Hg-5-Br-PADAP) complex. A volume of 500 microl of 9.0 mol L(-1) hydrochloric acid was used to back-extract the analyte from the RTIL phase into an aqueous media prior to its analysis by flow injection-cold vapor atomic absorption spectrometry (FI-CV-AAS). A preconcentration factor of 36 was achieved upon preconcentration of 20 mL of sample. The limit of detection (LOD) obtained under the optimal conditions was 2.3ngL(-1) and the relative standard deviation (RSD) for 10 replicates at 1 microg L(-1) Hg(2+) was 2.8%, calculated with peaks height. The method was successfully applied to the determination of mercury in river, sea, mineral and tap water samples and a certified reference material (CRM).

On-line preconcentration and speciation analysis of inorganic vanadium in urine using l-methionine immobilised on controlled pore glass.

A study was undertaken to ascertain the analytical capabilities of combined ICP-OES with ultrasonic nebulization to perform on-line preconcentration and speciation of inorganic V species in urine samples using a micro-column packed with l-methionine immobilized on controlled pore glass (CPG) as solid phase extractant. At pH 5.0, l-methionine is selective only towards V(V) while, total vanadium was quantitatively adsorbed by the solid phase at pH 9.0 [as V(V)] due to V(IV) oxidation in alkali media. Vanadium species retained by l-methionine were quantitatively eluted from the column with 10% HCl. Effects of acidity, sample flow rate, concentration of eluent and interfering ions on the recovery of the analytes have been systematically investigated. The detection limit (3sigma) of V is 0.008ngmL(-1) for USN-ICP-OES with an enhancement factor of 900 (10 for USN and 90 for l-methionine), and the relative standard deviation (R.S.D.) is better than 2%. The proposed method has been applied to the determination of inorganic V(V) and V(IV) in urine.

Determination of lead in human saliva by combined cloud point extraction-capillary zone electrophoresis with indirect UV detection.

A micelle-mediated phase separation without added chelating agents to preconcentrate trace levels of lead in human saliva as a prior step to its determination by capillary electrophoresis has been developed. The enrichment step is based on the cloud point extraction of lead with the non-ionic surfactant PONPE 7.5 in the absence of chelating agent. The surfactant-rich phase was diluted with acetonitrile and the resultant solution was injected directly into the CE instrument. Factors affecting the combined methodology such as surfactant-rich phase diluting agent, buffer pH and concentration, applied voltage, sample preparation and presence of additives were studied in detail. A BGE of 20 mM imidazole containing 30% acetonitrile, pH 6.20 was found to be optimal for the separation of lead from other saliva constituents. Indirect detection was performed at 205 nm. The detection limit value of lead for the preconcentration of 8 ml of saliva was 11.4 microg l(-1). The calibration graph using the preconcentration system was linear with a correlation coefficient of 0.997 at levels near the detection limits up to at least 400 microg l(-1). The reproducibility (R.S.D.) on the basis of migration time and peak area were better than 0.68 and 3.6%, respectively. The method was successfully applied to the determination of lead in human saliva.

A new fluorescent assay for enalapril maleate.

A new spectrofluorimetric method for the enalapril maleate monitoring was studied. Enalapril maleate was found to be highly photolabile. This drug was evaluated according to photodegradation assay at pH 2.5 and 6. Enalapril maleate was exposed to UVA-UVB radiations. Under these specific conditions was found as degradation product, the diketopiperazine. The modification of the fluorescent properties of enalapril maleate in solution after exposure UV-radiation and the degradation mechanisms were studied. The photodegradation was followed by the developed spectrofluorimetric assay.

Cloud point preconcentration prior to capillary zone electrophoresis: simultaneous determination of platinum and palladium at trace levels.

The incorporation of a cloud point extraction (CPE) step prior to capillary electrophoresis (CE) for simultaneously determining platinum and palladium at sub-microg/L levels is presented and evaluated. The analytes were extracted as 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complexes, at pH 2.0, mediated by micelles of the nonionic surfactant polyethyleneglycolmono-p-nonylphenyl ether (PONPE 7.5). The separation-determination step was developed from 150 microL of the extracted surfactant-rich phase diluted with 50 microL of acetonitrile (ACN). An exhaustive study of the variables affecting the cloud point extraction with PONPE 7.5 and the CZE step was done. The type and composition of the background electrolytes (BGEs) were investigated with respect to separation selectivity, reproducibility, and stability. A BGE of 50 mM monobasic sodium phosphate containing 30% ACN, pH 4.53 was found to be optimal for the separation of metal chelates. Detection was performed at 576 nm. An enrichment factor of 250 was obtained for the preconcentration of 50 mL of sample solution. The detection limits for the preconcentration of 50 mL of sample were 0.04 microg/L for Pt and 0.08 microg/L for Pd. As an analytical demonstration, ultratrace concentrations of platinum and palladium were conveniently quantitated in spiked water and urine samples.

Sensitive detection of salbutamol using europium-enhanced fluorescence with trioctylphosphine oxide (TOPO) as coligand.

In this work a simple and sensitive fluorimetric method for determination of salbutamol (4-[2-(tert-butylamino)-1-hydroxyethyl]-2-(hydroxymethyl) phenol) using an Eu enhanced signal was developed. The employed methodology is based on the formation of a ternary complex formed with Eu, salbutamol and trioctylphosphine oxide (TOPO). Intermolecular transfer of energy from the excited organic molecule to the lanthanide followed by lanthanide emission is responsible for excitation of the lanthanide ion in complex solutions and fluorescent enhancement. The luminescence properties of the ternary complex formed with TOPO and optimum formation conditions were investigated. The calibration curve is linear in the range between 6.92-180 microg l(-1) of salbutamol. The detection limit was 2.31 microg l(-1). Common excipients for these formulations were not found to interfere. A proposed method for the assay in commercial aerosols and nebulizer solutions containing salbutamol was applied with very good precision.

Continuous-flow/stopped-flow system using an immunobiosensor for quantification of human serum IgG antibodies to Helicobacter pylori.

Conventional methods, such as gastric biopsy, enzyme-linked immunosorbent assay (ELISA), culture, require a long time for the determination of Helicobacter pylori infections. This study reports an amperometric immunoreactor for rapid and sensitive quantification of human serum immunoglobulin G (IgG) antibodies to H. pylori. Antibodies in the serum sample are allowed to react immunologically with the purified H. pylori antigens that are immobilized on a rotating disk. The bound antibodies are quantified by horseradish peroxidase (HRP) enzyme-labeled second antibodies specific to human IgG. HRP in the presence of hydrogen peroxide catalyzes the oxidation of hydroquinone to p-benzoquinone. The electrochemical reduction back to hydroquinone is detected on a glassy carbon electrode surface at -0.15 V. The electrochemical detection can be done within 1 min, and the analysis time does not exceed 30 min. The calculated detection limits for amperometric detection and the ELISA procedure are 0.6 and 1.9 U ml-1, respectively. The amperometric immunoreactors showed higher sensitivity and lower time consumed than did the standard spectrophotometric detection ELISA method. It can also be used for rapid analysis in conventional and field conditions in biological, physiological, and analytical practices.

Development and validation of a capillary electrophoresis method for the determination of codeine, diphenhydramine, ephedrine and noscapine in pharmaceuticals.

The present work describes a simple, accurate and rapid method for the separation and simultaneous determination of codeine, diphenhydramine, ephedrine and noscapine present in cough-cold syrup formulations by capillary zone electrophoresis. Factors affecting the separation were the buffer pH and concentration, applied voltage, and presence of additives. Separations were carried out in less than 10 min with a 20 mM sodium tetraborate buffer, pH 8.50. The carrier electrolyte gave baseline separation with good resolution, great reproducibility and accuracy. Calibration plots were linear over at least three orders of magnitude of analyte concentrations, the lower limits of detection being within the range 0.42-1.33 microg ml(-1). Detection was performed by UV absorbance at wavelengths of 205 and 250 nm. Quantification of the components in actual syrup formulations was calculated against the responses of freshly prepared external standard solutions. The method was validated and met all analysis requirements of quality assurance and quality control. The procedure was fast and reliable and commercial pharmaceuticals could be analyzed without prior sample clean-up procedure.