Plaster board waste (PBW) - A potential fluoride leaching source in soil/water environments and, fluoride immobilization studies using soils.

Plaster board waste generated from industries, usually contains major proportion of calcium as calcium sulfate. In addition, fluoride is remarkably one among the constituents of this waste material which leaches off into the soil and aquatic environments and causes fluoride pollution. In order to simulate how the dumping of PBW causes fluoride contamination in soil and water sources, shaking and stirring based batch-mode leaching studies were conducted. These studies explored the leaching of fluoride as a function of particle size, agitation time, pH of the leaching solvent (distilled water), L/S (water: PBW) ratio, temperature and electrolytes. It was explored that 1 g of plaster board waste contains18.54 mg F per gram of PBP. High leaching of 3.72 mg F per liter was studied at pH 6.02 with Ca2+ and TDS contents of 1050 mg L-1 and1640 mg L-1 respectively. The influence of sodium electrolytes such as chloride, nitrate, hydrogen carbonate, carbonate, sulfate, borate, phosphate and acetate on the leaching of fluoride from PBW was studied. The influence of fluoride leaching by sodium phosphate recorded a high value of 12.75 mg L-1 with no detectable amount of calcium ions. The influence of eight electrolytic mixtures each containing five sodium electrolytes on fluoride leaching corroborated the highest leaching in mixtures containing phosphate followed by hydrogen carbonate/carbonate. Solutions of calcium and aluminium chloride and their mixture were used to measure the rate of leachable fluoride in solution. Furthermore, the fluoride leaching at different temperatures and acids was studied. Naturally occurring soils when blended with PBW were observed to immobilize fluoride and lessened the amount of leaching fluoride in water. Various characterization studies such as FTIR, Raman, FESEM (with EDS), XRD and XPS were carried out for PBW and its treated samples using different electrolytes. Fluoride leaching proportionate to the precipitation of carbonate and phosphate was recorded in the case of appropriate electrolyte and mixtures.

High fluoride in groundwater and associated non-carcinogenic risks at Tiruvannamalai region in Tamil Nadu, India.

The present investigation in the Tiruvannamalai region is about high fluoride contamination of groundwater samples from bore wells and open wells. About 75% of groundwater samples were found predominantly containing the fluoride content greater than the acceptable limit of 1.5 mg/L in the ranges 1.51 - 2.00 mg/L (23%), 2.01 - 3.00 mg/L (36%) and greater than or equal to 3.01 mg/L (16%) as per WHO. The other water quality parameters were found within the permissible limit of WHO. Taking the groundwater sources into consideration, the non - carcinogenic risk due to high fluoride concentration in groundwater sources revealed that teen - aged (98%), Children (92%) and Infant (98%) categories were at greater risk than those under Men (50%) and Women (69%) categories. The mapping was done on the spatial distribution of fluoride concentration in groundwater and the associated health risk by Ordinary Kriging. The correlation coefficients among the parameters witnessed that the hydro-chemical facies are interdependent. Box - Whisker plots illustrated the dispersion of various water quality parameters. The WQI data represented the quality of groundwater in view of potable nature due to dissolved ions. The Gibbs, bivariate mixing and the scatter plots ascribed the dissolution of carbonate and silicate minerals which dominate the groundwater chemistry. The factor analysis detailed the extracted loadings of different parameters of groundwater sources and differentiated the percentage variance values between bore well and open well sources.

Micro-plastic pollution along the Bay of Bengal coastal stretch of Tamil Nadu, South India.

In the present-day context, micro-plastic particles in a marine environment are increasingly ubiquitous and of considerable persistence. In line with the micro-plastic pollution, the present contribution is devoted to the investigation of micro-plastic particles (MPs) along the urban sandy beach called Marina, the renowned longest beach in India. Along the sea coast of about 5 km, the quantification of micro-plastic particles using optical microscope evidenced the granular, filamentous, filmy and tubular fragments in a total of 72 marine samples including those filtered in the marine water column (WAT; 24 samples), those found in wet sediment (WET; 24 samples) and those found in dry sand (DSS; 24 samples). The filamentous-typed plastics of 79%, 57% and 52%, respectively in WET, WAT and DSS dominated over the other granular and tubular types. The micro-plastic particles were in the range of 60-820 items per m3, 60-1620 items per kg and 20-1540 items per kg for WAT, WET and DSS, respectively. The standard deviation for the microplastics abundance were 193.1, 396.6 and 364.6 for WAT, WET and DSS respectively. Upon visual inspection, the micro particles were observed in eight different colors and most of the samples were found to contain two different fragment types. Apart from the optical microscopic examination, the micro-plastics particles were studied by scanning electron microscope (SEM) coupled with elemental analysis by energy dispersive spectroscopy (EDS). The energy spectral graphs displayed that the micro-filaments and micro-tubular particles contained polyesters and fluoro-polymers. The presence of few micro-filaments of polypropylene and polyethylene was also evidenced from their atomic percentage values of carbon of about 88% and 93%, respectively. The presence of fluoro-polymers and polyesters was also confirmed by Fourier Transform Infra-Red (FTIR). Excepting the fluoro-polymers, the micro-plastics particles contained elements arising from sea water (Na, Cl, S, Mg, Ca, K). Heavy metals such as Cu, Mn, Mo, Ru and Rh were observed in micro-tubular fragments. Fe and Ti elements were detected with the highest atomic percentage of 17.19 and 19.84 in micro-tubular fragments. All the observations and analyses give a photography of the nature and the spatial distribution of MPs along this Indian beach.

Using spatial metrics and surveys for the assessment of trans-boundary deforestation in protected areas of the Maya Mountain Massif: Belize-Guatemala border.

Understanding the trans-boundary deforestation history and patterns in protected areas along the Belize-Guatemala border is of regional and global importance. To assess deforestation history and patterns in our study area along a section of the Belize-Guatemala border, we incorporated multi-temporal deforestation rate analysis and spatial metrics with survey results. This multi-faceted approach provides spatial analysis with relevant insights from local stakeholders to better understand historic deforestation dynamics, spatial characteristics and human perspectives regarding the underlying causes thereof. During the study period 1991-2014, forest cover declined in Belize's protected areas: Vaca Forest Reserve 97.88%-87.62%, Chiquibul National Park 99.36%-92.12%, Caracol Archeological Reserve 99.47%-78.10% and Colombia River Forest Reserve 89.22%-78.38% respectively. A comparison of deforestation rates and spatial metrics indices indicated that between time periods 1991-1995 and 2012-2014 deforestation and fragmentation increased in protected areas. The major underlying causes, drivers, impacts, and barriers to bi-national collaboration and solutions of deforestation along the Belize-Guatemala border were identified by community leaders and stakeholders. The Mann-Whitney U test identified significant differences between leaders and stakeholders regarding the ranking of challenges faced by management organizations in the Maya Mountain Massif, except for the lack of assessment and quantification of deforestation (LD, SH: 18.67, 23.25, U = 148, p > 0.05). The survey results indicated that failure to integrate buffer communities, coordinate among managing organizations and establish strong bi-national collaboration has resulted in continued ecological and environmental degradation. The information provided by this research should aid managing organizations in their continued aim to implement effective deforestation mitigation strategies.

Compost in plant microbial fuel cell for bioelectricity generation.

Recycling of organic waste is an important topic in developing countries as well as developed countries. Compost from organic waste has been used for soil conditioner. In this study, an experiment has been carried out to produce green energy (bioelectricity) by using paddy plant microbial fuel cells (PMFCs) in soil mixed with compost. A total of six buckets filled with the same soil were used with carbon fiber as the electrodes for the test. Rice plants were planted in five of the buckets, with the sixth bucket containing only soil and an external resistance of 100 ohm was used for all cases. It was observed that the cells with rice plants and compost showed higher values of voltage and power density with time. The highest value of voltage showed around 700 mV when a rice plant with 1% compost mixed soil was used, however it was more than 95% less in the case of no rice plant and without compost. Comparing cases with and without compost but with the same number of rice plants, cases with compost depicted higher voltage to as much as 2 times. The power density was also 3 times higher when the compost was used in the paddy PMFCs which indicated the influence of compost on bio-electricity generation.

[Retrospective analysis of elderly patients > or = 60 years of age with acute leukemia].

A retrospective analysis was performed on 76 consecutive elderly patients with acute leukemia aged 60 years or more (48 men, 28 women). Forty patients were 60-69 years old, 28 were 70-79 years old and 8 were > or = 80 years old. There were 55 patients with acute myelogenous leukemia (AML), 13 acute lymphoblastic leukemia (ALL) and 8 AML from myelodysplastic syndrome (MDS/AML). Patients were treated with the JALSG protocol, CAG regimen, or low-dose Ara-C regimen for AML, and DVP/M-CHOP protocol for ALL. The complete remission (CR) rates were 52.7% (29 of 55) in AML, 61.5% (8 of 13) in ALL, and 0% in MDS/AML. The median CR durations were 226, 85, 0 days, and the median survivals were 204, 177, 99 days, respectively. CR rates were 65.3% for the JALSG protocol, 62.5% for the CAG regimen and 25.0% for low-dose Ara-C regimen. According to age, CR was obtained 62.5% in patients aged 60-69 years and 33.3% in patients over 70 years old. Our results indicated that patients aged 60-69 years should be treated with intensive chemotherapy.