A high-density and high-confinement tokamak plasma regime for fusion energy.

The tokamak approach, utilizing a toroidal magnetic field configuration to confine a hot plasma, is one of the most promising designs for developing reactors that can exploit nuclear fusion to generate electrical energy1,2. To reach the goal of an economical reactor, most tokamak reactor designs3-10 simultaneously require reaching a plasma line-averaged density above an empirical limit-the so-called Greenwald density11-and attaining an energy confinement quality better than the standard high-confinement mode12,13. However, such an operating regime has never been verified in experiments. In addition, a long-standing challenge in the high-confinement mode has been the compatibility between a high-performance core and avoiding large, transient edge perturbations that can cause very high heat loads on the plasma-facing-components in tokamaks. Here we report the demonstration of stable tokamak plasmas with a line-averaged density approximately 20% above the Greenwald density and an energy confinement quality of approximately 50% better than the standard high-confinement mode, which was realized by taking advantage of the enhanced suppression of turbulent transport granted by high density-gradients in the high-poloidal-beta scenario14,15. Furthermore, our experimental results show an integration of very low edge transient perturbations with the high normalized density and confinement core. The operating regime we report supports some critical requirements in many fusion reactor designs all over the world and opens a potential avenue to an operating point for producing economically attractive fusion energy.

Robust Avoidance of Edge-Localized Modes alongside Gradient Formation in the Negative Triangularity Tokamak Edge.

In a series of high performance diverted discharges on DIII-D, we demonstrate that strong negative triangularity (NT) shaping robustly suppresses all edge-localized mode (ELM) activity over a wide range of plasma conditions: ⟨n⟩=0.1-1.5×10^{20} m^{-3}, P_{aux}=0-15 MW, and |B_{t}|=1-2.2 T, corresponding to P_{loss}/P_{LH08}∼8. The full dataset is consistent with the theoretical prediction that magnetic shear in the NT edge inhibits access to ELMing H-mode regimes; all experimental pressure profiles are found to be at or below the infinite-n ballooning stability limit. Our present dataset also features edge pressure gradients in strong NT that are closer to an H-mode than a typical L-mode plasma, supporting the consideration of NT for reactor design.

Use of a wastewater recovery product (struvite) to enhance subtropical seagrass restoration.

Seagrasses are in decline worldwide, and their restoration is relatively expensive and unsuccessful compared to other coastal systems. Fertilization can improve seagrass growth in restoration but can also release nutrients and pollute the surrounding ecosystem. A slow-release fertilizer may reduce excessive nutrient discharge while still providing resources to the seagrass's rhizosphere. In this study, struvite (magnesium ammonium phosphate), a relatively insoluble, sustainable compound harvested in wastewater treatment plants, was compared to Osmocote™(14:14:14 Nitrogen: Phosphorus: Potassium, N:P:K), a popular polymer coated controlled release fertilizer commonly used in seagrass restoration. Two experiments compared the effectiveness of both fertilizers in a subtropical flow-through mesocosm setup. In the first experiment, single 0.5 mg of P per g dry weight (DW) doses of Osmocote™and struvite fertilizers were added to seagrass plots. Seagrass shoot counts were significantly higher in plots fertilized with struvite than both the Osmocote™and unfertilized controls (p< 0.0001). A significant difference in total P concentration was observed in porewater samples of Osmocote™vs struvite and controls (p< 0.0001), with struvite fertilized plots emitting more than controls (p ≤ 0.0001), but less than 2% of the total dissolved P (TDP) of Osmocote™fertilized plots (100+ mg/L versus x > 5 mg/L). A subsequent experiment, using smaller doses (0.01 and 0.025 mg of P per gram DW added), also found that the struvite treatments performed better than Osmocote™, with 16-114% more aboveground biomass (10-60% higher total biomass) while releasing less N and P. These results indicate the relatively rapid dissolution of Osmocote™may pose problems to restoration efforts, especially in concentrated doses and possibly leading to seagrass stress. In contrast, struvite may function as a slow-release fertilizer applicable in seagrass and other coastal restoration efforts.

First Evidence of Local E×B Drift in the Divertor Influencing the Structure and Stability of Confined Plasma near the Edge of Fusion Devices.

The structure of the edge plasma in a magnetic confinement system has a strong impact on the overall plasma performance. We uncover for the first time a magnetic-field-direction dependent density shelf, i.e., local flattening of the density radial profile near the magnetic separatrix, in high confinement plasmas with low edge collisionality in the DIII-D tokamak. The density shelf is correlated with a doubly peaked density profile near the divertor target plate, which tends to occur for operation with the ion B×∇B drift direction away from the X-point, as currently employed for DIII-D advanced tokamak scenarios. This double-peaked divertor plasma profile is connected via the E×B drifts, arising from a strong radial electric field induced by the radial electron temperature gradient near the divertor target. The drifts lead to the reversal of the poloidal flow above the divertor target, resulting in the formation of the density shelf. The edge density shelf can be further enhanced at higher heating power, preventing large, periodic bursts of the plasma, i.e., edge-localized modes, in the edge region, consistent with ideal magnetohydrodynamics calculations.

Are two cues always better than one? The role of multiple intra-sensory cues compared to multi-cross-sensory cues in children's incidental category learning.

Simultaneous presentation of multisensory cues has been found to facilitate children's learning to a greater extent than unisensory cues (e.g., Broadbent, White, Mareschal, & Kirkham, 2017). Current research into children's multisensory learning, however, does not address whether these findings are due to having multiple cross-sensory cues that enhance stimuli perception or a matter of having multiple cues, regardless of modality, that are informative to category membership. The current study examined the role of multiple cross-sensory cues (e.g., audio-visual) compared to multiple intra-sensory cues (e.g., two visual cues) on children's incidental category learning. On a computerized incidental category learning task, children aged six to ten years (N = 454) were allocated to either a visual-only (V: unisensory), auditory-only (A: unisensory), audio-visual (AV: multisensory), Visual-Visual (VV: multi-cue) or Auditory-Auditory (AA: multi-cue) condition. In children over eight years of age, the availability of two informative cues, regardless of whether they had been presented across two different modalities or within the same modality, was found to be more beneficial to incidental learning than with unisensory cues. In six-year-olds, however, the presence of multiple auditory cues (AA) did not facilitate learning to the same extent as multiple visual cues (VV) or when cues were presented across two different modalities (AV). The findings suggest that multiple sensory cues presented across or within modalities may have differential effects on children's incidental learning across middle childhood, depending on the sensory domain in which they are presented. Implications for the use of multi-cross-sensory and multiple-intra-sensory cues for children's learning across this age range are discussed.

Incidental category learning and cognitive load in a multisensory environment across childhood.

Multisensory information has been shown to facilitate learning (Bahrick & Lickliter, 2000; Broadbent, White, Mareschal, & Kirkham, 2017; Jordan & Baker, 2011; Shams & Seitz, 2008). However, although research has examined the modulating effect of unisensory and multisensory distractors on multisensory processing, the extent to which a concurrent unisensory or multisensory cognitive load task would interfere with or support multisensory learning remains unclear. This study examined the role of concurrent task modality on incidental category learning in 6- to 10-year-olds. Participants were engaged in a multisensory learning task while also performing either a unisensory (visual or auditory only) or multisensory (audiovisual) concurrent task (CT). We found that engaging in an auditory CT led to poorer performance on incidental category learning compared with an audiovisual or visual CT, across groups. In 6-year-olds, category test performance was at chance in the auditory-only CT condition, suggesting auditory concurrent tasks may interfere with learning in younger children, but the addition of visual information may serve to focus attention. These findings provide novel insight into the use of multisensory concurrent information on incidental learning. Implications for the deployment of multisensory learning tasks within education across development and developmental changes in modality dominance and ability to switch flexibly across modalities are discussed. (PsycINFO Database Record

Upgraded flowing liquid lithium limiter for improving Li coverage uniformity and erosion resistance in EAST device.

We report on design and technology improvements for a flowing liquid lithium (FLiLi) limiter inserted into auxiliary heated discharges in the experimental advanced superconducting tokamak device. In order to enhance Li coverage uniformity and erosion resistance, a new liquid Li distributor with homogenous channels was implemented. In addition, two independent electromagnetic pumps and a new horizontal capillary structure contributed to an improvement in the observed Li flow uniformity (from 30% in the previous FLiLi design to >80% in this FLiLi design). To improve limiter surface erosion resistance, hot isostatic press technology was applied, which improved the thermal contact between thin stainless steel protective layers covering the Cu heat sink. The thickness of the stainless steel layer was increased from 0.1 mm to 0.5 mm, which also helped macroscopic erosion resilience. Despite the high auxiliary heating power up to 4.5 MW, no Li bursts were recorded from FLiLi, underscoring the improved performance of this new design.

Specialized Pheromone and Lure Application Technology as an Alternative Male Annihilation Technique to Manage Bactrocera tryoni (Diptera: Tephritidae).

The results of this study suggest that a novel male annihilation technique (specialized pheromone and lure application technology [SPLAT] incorporating cue-lure [CL] plus spinosad) is as effective as industry standard male annihilation controls, and is worth exploring further to manage Bactrocera tryoni (Froggatt) populations. Three lures were evaluated in a contact and feeding bioassay and a cage attractancy trial: 1) SPLAT-CL + spinosad; 2) SPLAT-CL without spinosad; and 3) wick-CL + malathion. In a field attraction trial, lures (1) and (3) were evaluated with a third treatment, caneite blocks-CL + malathion. Lures were weathered for 0, 1, 2, 4, or 8 wk, with an additional weathering treatment of 12 wk included in the field trial. In the contact and feeding bioassay, lures with SPLAT-CL + spinosad were >97% effective at 48 h for up to 2 wk weathering; however, wicks-CL + malathion killed B. tryoni within 2 h of exposure under all weathering periods. In the cage attractancy trial, SPLAT-CL + spinosad was as effective as, or performed better than, wicks-CL + malathion under all weathering treatments. The field study trap catches were similar for SPLAT-CL + spinosad and blocks-CL + malathion, and both had higher trap catches than wicks-CL + malathion at all weathering periods, except week 12. Overall, SPLAT-CL + spinosad compared favorably with current standard techniques for male annihilation and warrants further research. SPLAT-CL + spinosad may be a reduced-risk alternative for wicks-CL + malathion or blocks-CL + malathion for B. tryoni and other CL-responding fruit flies, such as Bactrocera cucurbitae Coquillett, because it contains a reduced-risk insecticide that poses a lower risk to humans and the environment and does not require labor-intensive handling and placement.

Pedestal bifurcation and resonant field penetration at the threshold of edge-localized mode suppression in the DIII-D Tokamak.

Rapid bifurcations in the plasma response to slowly varying n=2 magnetic fields are observed as the plasma transitions into and out of edge-localized mode (ELM) suppression. The rapid transition to ELM suppression is characterized by an increase in the toroidal rotation and a reduction in the electron pressure gradient at the top of the pedestal that reduces the perpendicular electron flow there to near zero. These events occur simultaneously with an increase in the inner-wall magnetic response. These observations are consistent with strong resonant field penetration of n=2 fields at the onset of ELM suppression, based on extended MHD simulations using measured plasma profiles. Spontaneous transitions into (and out of) ELM suppression with a static applied n=2 field indicate competing mechanisms of screening and penetration of resonant fields near threshold conditions. Magnetic measurements reveal evidence for the unlocking and rotation of tearinglike structures as the plasma transitions out of ELM suppression.

Access to a new plasma edge state with high density and pressures using the quiescent H mode.

A path to a new high performance regime has been discovered in tokamaks that could improve the attractiveness of a fusion reactor. Experiments on DIII-D using a quiescent H-mode edge have navigated a valley of improved edge peeling-ballooning stability that opens up with strong plasma shaping at high density, leading to a doubling of the edge pressure over the standard H mode with edge localized modes at these parameters. The thermal energy confinement time increases as a result of both the increased pedestal height and improvements in the core transport and reduced low-k turbulence. Calculations of the pedestal height and width as a function of density using constraints imposed by peeling-ballooning and kinetic-ballooning theory are in quantitative agreement with the measurements.

Observation of the L-H confinement bifurcation triggered by a turbulence-driven shear flow in a tokamak plasma.

Comprehensive 2D turbulence and eddy flow velocity measurements on DIII-D demonstrate a rapidly increasing turbulence-driven shear flow that develops ∼100 µs prior to the low-confinement (L mode) to high-confinement (H mode) transition and appears to trigger it. These changes are localized to a narrow layer 1-2 cm inside the magnetic boundary. Increasing heating power increases the Reynolds stress, the energy transfer from turbulence to the poloidal flow, and the edge flow shearing rate that then exceeds the decorrelation rate, suppressing turbulence and triggering the transition.

Status and characterization of the lithium beam diagnostic on DIII-D.

The 30 keV lithium beam diagnostic on DIII-D is suitable to measure both the radial electron density and poloidal magnetic field profiles in the pedestal. The refurbished system features a new setup to measure the Doppler shift allowing accurate alignment of the spectral filters. The injector has been optimized to generate a stable lithium neutral beam with a current of I = 15-20 mA and a diameter of 1.9 ± 0.1 cm measured by beam imaging. The typical temporal resolution is Δt = 1-10 ms and the radial resolution of ΔR = 5 mm is given by the optical setup. A new analysis technique based on fast Fourier transform avoids systematic error contributions from the digital lock-in analysis and accounts intrinsically for background light correction. Latest upgrades and a detailed characterization of the system are presented. Proof-of-principle measurements of the poloidal magnetic field with a statistical error of typically 2% show a fair agreement with the predictions modeled with the Grad-Shafranov equilibrium solver EFIT within 4%.

Reduction of edge-localized mode intensity using high-repetition-rate pellet injection in tokamak H-mode plasmas.

High repetition rate injection of deuterium pellets from the low-field side (LFS) of the DIII-D tokamak is shown to trigger high-frequency edge-localized modes (ELMs) at up to 12× the low natural ELM frequency in H-mode deuterium plasmas designed to match the ITER baseline configuration in shape, normalized beta, and input power just above the H-mode threshold. The pellet size, velocity, and injection location were chosen to limit penetration to the outer 10% of the plasma. The resulting perturbations to the plasma density and energy confinement time are thus minimal (<10%). The triggered ELMs occur at much lower normalized pedestal pressure than the natural ELMs, suggesting that the pellet injection excites a localized high-n instability. Triggered ELMs produce up to 12× lower energy and particle fluxes to the divertor, and result in a strong decrease in plasma core impurity density. These results show for the first time that shallow, LFS pellet injection can dramatically accelerate the ELM cycle and reduce ELM energy fluxes on plasma facing components, and is a viable technique for real-time control of ELMs in ITER.

Initial results of the high resolution edge Thomson scattering upgrade at DIII-D.

Validation of models of pedestal structure is an important part of predicting pedestal height and performance in future tokamaks. The Thomson scattering diagnostic at DIII-D has been upgraded in support of validating these models. Spatial and temporal resolution, as well as signal to noise ratio, have all been specifically enhanced in the pedestal region. This region is now diagnosed by 20 view-chords with a spacing of 6 mm and a scattering length of just under 5 mm sampled at a nominal rate of 250 Hz. When mapped to the outboard midplane, this corresponds to ~3 mm spacing. These measurements are being used to test critical gradient models, in which pedestal gradients increase in time until a threshold is reached. This paper will describe the specifications of the upgrade and present initial results of the system.

A review of the association between osteosarcoma metastasis and protein translation.

The malignant transformation of mesenchymal cells within the bone leads to the development of osteosarcoma (OS), but the genetic underpinnings of these events are not understood. From a clinical perspective, primary tumour management can be achieved successfully in most patients. However, the development of metastasis to the lungs represents the most common cause of death in OS patients. A clearer understanding of metastasis biology is required to improve cancer mortality and improve outcomes. Modelling the genetics, biology and therapy of OS can be accomplished through research involving a number of species. Most notable is the naturally occurring form of OS that develops in dogs. Through a cross-species and comparative approach important questions can be asked within specific and suitable models to advance our understanding of this disease and its common metastatic outcome. A comparative perspective on the problem of OS metastasis that utilizes a cross-species approach may offer unique opportunities to assist in this prioritization and generate new hypotheses related to this important clinical problem.

Spatial resolution of the JET Thomson scattering system.

The instrument function of the high resolution Thomson scattering (HRTS) diagnostic in the Joint European Torus (JET) has been calculated for use in improved pedestal profile analysis. The full width at half maximum (FWHM) of the spatial instrument response is (22 ± 1) mm for the original HRTS system configuration and depends on the particular magnetic topology of the JET plasmas. An improvement to the optical design of the laser input system is presented. The spatial smearing across magnetic flux surfaces is reduced in this design. The new input system has been implemented (from JPN 78742, July 2009) and the HRTS instrument function corresponding to the new configuration has been improved to approximately FWHM = (9.8 ± 0.8) mm. The reconstructed instrument kernels are used in combination with an ad hoc forward deconvolution procedure for pedestal analysis. This procedure produces good results for both the old and new setups, but the reliability of the deconvolved profiles is greatly reduced when the pedestal width is of the same order as, or less than the FWHM of the instrument kernel.

Continuous improvement of H-mode discharge performance with progressively increasing lithium coatings in the National Spherical Torus Experiment.

Lithium wall coatings have been shown to reduce recycling, improve energy confinement, and suppress edge localized modes in the National Spherical Torus Experiment. Here, we show that these effects depend continuously on the amount of predischarge lithium evaporation. We observed a nearly monotonic reduction in recycling, decrease in electron transport, and modification of the edge profiles and stability with increasing lithium. These correlations challenge basic expectations, given that even the smallest coatings exceeded that needed for a nominal thickness of the order of the implantation range.

Protein kinase C regulates ezrin-radixin-moesin phosphorylation in canine osteosarcoma cells.

The development of metastasis is the most significant cause of death for both canine and human patients with osteosarcoma (OS). Ezrin has been associated with tumour progression and metastasis in human, canine and murine OS. Ezrin activation is dynamically regulated by protein kinase C (PKC) during metastatic progression in human and murine OS. To include the dog in the development of therapeutics that target ezrin biology, we characterized four new canine OS cell lines and confirmed the relationship between PKC and ezrin in these cells. Three of four cell lines formed tumours in mice that were histologically consistent with OS. All cell lines were markedly aneuploid and expressed ezrin and PKC. Finally, both ezrin phosphorylation and cell migration were inhibited using a PKC inhibitor. These data suggest that an association between PKC-mediated activation of ezrin and the metastatic phenotype in canine OS cells.

High-frequency coherent edge fluctuations in a high-pedestal-pressure quiescent H-mode plasma.

A set of high frequency coherent (HFC) modes (f=80-250 kHz) is observed with beam emission spectroscopy measurements of density fluctuations in the pedestal of a strongly shaped quiescent H-mode plasma on DIII-D, with characteristics predicted for kinetic ballooning modes (KBM): propagation in the ion-diamagnetic drift direction; a frequency near 0.2-0.3 times the ion-diamagnetic frequency; inferred toroidal mode numbers of n∼10-25; poloidal wave numbers of k(θ)∼0.17-0.4 cm(-1); and high measured decorrelation rates (τ(c)(-1)∼ω(s)∼0.5×10(6) s(-1)). Their appearance correlates with saturation of the pedestal pressure.