Efflux pumps mediate changes to fundamental bacterial physiology via membrane potential.

Efflux pumps are well known to be an important mechanism for removing noxious substances such as antibiotics from bacteria. Given that many antibiotics function by accumulating inside bacteria, efflux pumps contribute to resistance. Efflux pump inactivation is a potential strategy to combat antimicrobial resistance, as bacteria would not be able to pump out antibiotics. We recently discovered that the impact of loss of efflux function is only apparent in actively growing cells. We demonstrated that the global transcriptome of Salmonella Typhimurium is drastically altered during slower growth leading to stationary-phase cells having a remodeled, less permeable envelope that prevents antibiotics entering the cell. Here, we investigated the effects of deleting the major efflux pump of Salmonella Typhimurium, AcrB, on global gene transcription across growth. We revealed that an acrB knockout entered stationary phase later than the wild-type strain SL1344 and displayed increased and prolonged expression of genes responsible for anaerobic energy metabolism. We devised a model linking efflux and membrane potential, whereby deactivation of AcrB prevents influx of protons across the inner membrane and thereby hyperpolarization. Knockout or deactivation of AcrB was demonstrated to increase membrane potential. We propose that the global transcription regulator ArcBA senses changes to the redox state of the quinol pool (linked to the membrane potential of the bacterium) and coordinates the shift from exponential to stationary phase via the key master regulators RpoS, Rsd, and Rmf. Inactivation of efflux pumps therefore influences the fundamental physiology of Salmonella, with likely impacts on multiple phenotypes.IMPORTANCEWe demonstrate for the first time that deactivation of efflux pumps brings about changes to gross bacterial physiology and metabolism. Rather than simply being a response to noxious substances, efflux pumps appear to play a key role in maintenance of membrane potential and thereby energy metabolism. This discovery suggests that efflux pump inhibition or inactivation might have unforeseen positive consequences on antibiotic activity. Given that stationary-phase bacteria are more resistant to antibiotic uptake, late entry into stationary phase would prolong antibiotic accumulation by bacteria. Furthermore, membrane hyperpolarization could result in increased generation of reactive species proposed to be important for the activity of some antibiotics. Finally, changes in gross physiology could also explain the decreased virulence of efflux mutants.

Integrated system for temperature-controlled fast protein liquid chromatography. IV. Continuous 'one-column' 'low-salt' hydrophobic interaction chromatography.

Systematic development of a temperature-controlled isocratic process for one-column low-salt hydrophobic interaction chromatography (HIC) of proteins employing a travelling cooling zone reactor (TCZR) system, is described. Batch binding and confocal scanning microscopy were employed to define process conditions for temperature-reversible binding of bovine serum albumin (BSA) which were validated in pulse-response temperature switching HIC experiments, before transferring to TCZR-HIC. A thin-walled stainless-steel column mounted with a movable assembly of copper blocks and Peltier elements (travelling cooling zone, TCZ) was used for TCZR-HIC. In pulse-response TCZR-HIC, 12 TCZ movements along the column desorbed 86.3% of the applied BSA monomers in 95.3% purity depleted >6-fold in 2-4 mers and nearly 260-fold in higher molecular weight (HMW) species. For continuous TCZR-HIC, the TCZ was moved 49-58 times during uninterrupted loading of BSA feeds at 0.25, 0.5 or 1 mg·mL-1. Each TCZ movement generated a sharp symmetrical elution peak. In the best case, (condition 1: 0.25 mg·mL-1 BSA; >17 mg BSA applied per mL of bed) the height of TCZ elution peaks approached pseudo-steady midway through the loading phase with no rise in baseline UV280 signal between peaks. Peak composition remained constant averaging 94.4% monomer, 5.6% 2-4 mers and <0.05% HMW. Monomers were recovered in quantitative yield depleted >3.1 fold in 2-4 mers and 92-fold in HMW species cf. the feed (63.6% monomers, 21.8% 2-4 mers, 14.6% HMW). However, increasing the BSA concentration to 1 mg·mL-1 (condition 2) or employing a fouled HIC column with 0.5 mg·mL-1 BSA (condition 3) compromised monomer purification performance.

Approaches for high-throughput quantification of periplasmic recombinant proteins.

The Gram-negative periplasm is a convenient location for the accumulation of many recombinant proteins including biopharmaceutical products. It is the site of disulphide bond formation, required by some proteins (such as antibody fragments) for correct folding and function. It also permits simpler protein release and downstream processing than cytoplasmic accumulation. As such, targeting of recombinant proteins to the E. coli periplasm is a key strategy in biologic manufacture. However, expression and translocation of each recombinant protein requires optimisation including selection of the best signal peptide and growth and production conditions. Traditional methods require separation and analysis of protein compositions of periplasmic and cytoplasmic fractions, a time- and labour-intensive method that is difficult to parallelise. Therefore, approaches for high throughput quantification of periplasmic protein accumulation offer advantages in rapid process development.

Optimisation of recombinant TNFα production in Escherichia coli using GFP fusions and flow cytometry.

Escherichia coli is commonly used industrially to manufacture recombinant proteins for biopharmaceutical applications, as well as in academic and industrial settings for R&D purposes. Optimisation of recombinant protein production remains problematic as many proteins are difficult to make, and process conditions must be optimised for each individual protein. An approach to accelerate process development is the use of a green fluorescent protein (GFP) fusions, which can be used to rapidly and simply measure the quantity and folding state of the protein of interest. In this study, we used GFP fusions to optimise production of recombinant human protein tumour necrosis factor (rhTNFα) using a T7 expression system. Flow cytometry was used to measure fluorescence and cell viability on a single cell level to determine culture heterogeneity. Fluorescence measurements were found to be comparable to data generated by subcellular fractionation and SDS-PAGE, a far more time-intensive technique. We compared production of rhTNFα-GFP with that of GFP alone to determine the impact of rhTNFα on expression levels. Optimised shakeflask conditions were then transferred to fed-batch high cell density bioreactor cultures. Finally, the expression of GFP from a paraBAD expression vector was compared to the T7 system. We highlight the utility of GFP fusions and flow cytometry for rapid process development.

Impact of Environmental Stresses on the Antibacterial Activity of Graphene Oxide (GO) Nanoparticles against P. putida Biofilms.

As the production of graphene-based nanomaterials such as GO is increasing, it is expected that a large amount of GO waste will be generated. The environment (i.e., soil and aquatic systems) will be amongst the final repositories of these wastes which means important natural microbial communities in such environments will be at risk of GO exposure. However, little is known about how these communities respond to environmental stresses in synergy with the presence of GO. In this study, the effect of three different stress conditions: temperature (5, 25 and 40 °C); pH (5 to 9) and osmotic stress (51, 219 and 320 mM NaCl) in addition to GO treatment was investigated on the viability and physiology of biofilms and planktonic cells of soil bacterium P. putida. It was found that planktonic cells were more resistant to GO alone compared to biofilms. However, the cells were sensitive to GO when exposed to pH or osmotic stresses. Temperature was not found to influence the survival of biofilm with or without exposure to GO. However, low pH caused a reduction in colony-forming units (CFU) at pHs 5 and 6 for the pre-treated samples, while biofilms at pH 7-9 did not show any decrease. Interestingly, the post-treatment of planktonic cells or biofilms with GO showed a significant reduction in CFU at all pH ranges. The effect of higher osmotic stress in combination with GO resulted in a significant reduction in biofilms. These results show that the effect of stresses naturally occurring in the environment can be affected and changed when in combination with GO and can potentially affect the balance of natural biofilms.

New vectors for urea-inducible recombinant protein production.

We have developed a novel urea-inducible recombinant protein production system by exploiting the Proteus mirabilis urease ureR-ureD promoter region and the ureR AraC-family transcriptional regulator. Experiments using the expression of ß-galactosidase and green fluorescent protein (GFP) showed that promoter activity is tightly regulated and that varying the concentration of urea can give up to 100-fold induction. Production of proteins of biopharmaceutical interest has been demonstrated, including human growth hormone (hGH), a single chain antibody fragment (scFv) against interleukin-1ß and a potential Neisserial vaccine candidate (BamAENm). Expression levels can be fine-tuned by temperature and different urea concentrations, and can be induced with readily available garden fertilisers and even urine. As urea is an inexpensive, stable inducer, a urea-induced expression system has the potential to considerably reduce the costs of large-scale recombinant protein production.

Polymer-induced biofilms for enhanced biocatalysis.

The intrinsic resilience of biofilms to environmental conditions makes them an attractive platform for biocatalysis, bioremediation, agriculture or consumer health. However, one of the main challenges in these areas is that beneficial bacteria are not necessarily good at biofilm formation. Currently, this problem is solved by genetic engineering or experimental evolution, techniques that can be costly and time consuming, require expertise in molecular biology and/or microbiology and, more importantly, are not suitable for all types of microorganisms or applications. Here we show that synthetic polymers can be used as an alternative, working as simple additives to nucleate the formation of biofilms. Using a combination of controlled radical polymerization and dynamic covalent chemistry, we prepare a set of synthetic polymers carrying mildly cationic, aromatic, heteroaromatic or aliphatic moieties. We then demonstrate that hydrophobic polymers induce clustering and promote biofilm formation in MC4100, a strain of Escherichia coli that forms biofilms poorly, with aromatic and heteroaromatic moieties leading to the best performing polymers. Moreover, we compare the effect of the polymers on MC4100 against PHL644, an E. coli strain that forms biofilms well due to a single point mutation which increases expression of the adhesin curli. In the presence of selected polymers, MC4100 can reach levels of biomass production and curli expression similar or higher than PHL644, demonstrating that synthetic polymers promote similar changes in microbial physiology than those introduced following genetic modification. Finally, we demonstrate that these polymers can be used to improve the performance of MC4100 biofilms in the biocatalytic transformation of 5-fluoroindole into 5-fluorotryptophan. Our results show that incubation with these synthetic polymers helps MC4100 match and even outperform PHL644 in this biotransformation, demonstrating that synthetic polymers can underpin the development of beneficial applications of biofilms.

Process intensification at the expression system level for the production of 1-phosphate aldolase in antibiotic-free E. coli fed-batch cultures.

To successfully design expression systems for industrial biotechnology and biopharmaceutical applications; plasmid stability, efficient synthesis of the desired product and the use of selection markers acceptable to regulatory bodies are of utmost importance. In this work we demonstrate the application of a set of IPTG-inducible protein expression systems -- harboring different features namely, antibiotic vs auxotrophy marker; two-plasmids vs single plasmid expression system; expression levels of the repressor protein (LacI) and the auxotrophic marker (glyA) -- in high-cell density cultures to evaluate their suitability in bioprocess conditions that resemble industrial settings. Results revealed that the first generation of engineered strain showed a 50% reduction in the production of the model recombinant protein fuculose-1-phosphate aldolase (FucA) compared to the reference system from QIAGEN. The over-transcription of glyA was found to be a major factor responsible for the metabolic burden. The second- and third-generation of expression systems presented an increase in FucA production and advantageous features. In particular, the third-generation expression system is antibiotic-free, autotrophy-selection based and single-plasmid and, is capable to produce FucA at similar levels compared to the original commercial expression system. These new tools open new avenues for high-yield and robust expression of recombinant proteins in E. coli.

Inexpensive protein overexpression driven by the NarL transcription activator protein.

Most Escherichia coli overexpression vectors used for recombinant protein production (RPP) depend on organic inducers, for example, sugars or simple conjugates. However, these can be expensive and, sometimes, chemically unstable. To simplify this and to cut the cost of RPP, we have developed vectors controlled by the Escherichia coli nitrate-responsive NarL transcription activator protein, which use nitrate, a cheap, stable, and abundant inorganic ion, to induce high-level controlled RPP. We show that target proteins, such as green fluorescent protein, human growth hormone, and single-chain variable region antibody fragments can be expressed to high levels using our promoter systems. As nitrate levels are high in many commercial fertilizers, we demonstrate that controlled RPP can be achieved using readily available and inexpensive garden products.

Surgical-PEARL protocol: a multicentre prospective cohort study exploring aetiology, management and outcomes for patients with congenital anomalies potentially requiring surgical intervention.

INTRODUCTION: Congenital anomalies affect over 2% of pregnancies. Surgical advances have reduced mortality and improved survival for patients with congenital anomalies potentially requiring surgical (CAPRS) intervention. However, our understanding of aetiology, diagnostic methods, optimal management, outcomes and prognostication is limited. Existing birth cohorts have low numbers of individual heterogenous CAPRS. The Surgical Paediatric congEnital Anomalies Registry with Long term follow-up (Surgical-PEARL) study aims to establish a multicentre prospective fetal, child and biological parent cohort of CAPRS. METHODS AND ANALYSIS: From 2022 to 2027, Surgical-PEARL aims to recruit 2500 patients with CAPRS alongside their biological mothers and fathers from up to 15 UK centres. Recruitment will be antenatal or postnatal dependent on diagnosis timing and presentation to a recruitment site. Routine clinical data including antenatal scans and records, neonatal intensive care unit (NICU) records, diagnostic and surgical data and hospital episode statistics will be collected. A detailed biobank of samples will include: parents' blood and urine samples; amniotic fluid if available; children's blood and urine samples on admission to NICU, perioperatively or if the child has care withdrawn or is transferred for extracorporeal membrane oxygenation; stool samples; and surplus surgical tissue. Parents will complete questionnaires including sociodemographic and health data. Follow-up outcome and questionnaire data will be collected for 5 years. Once established we will explore the potential of comparing findings in Surgical-PEARL to general population cohorts born in the same years and centres. ETHICS AND DISSEMINATION: Ethical and health research authority approvals have been granted (IRAS Project ID: 302251; REC reference number 22/SS/0004). Surgical-PEARL is adopted onto the National Institute for Health Research Clinical Research Network portfolio. Findings will be disseminated widely through peer-reviewed publication, conference presentations and through patient organisations and newsletters. TRIAL REGISTRATION NUMBER: ISRCTN12557586.

Efflux Impacts Intracellular Accumulation Only in Actively Growing Bacterial Cells.

For antibiotics with intracellular targets, effective treatment of bacterial infections requires the drug to accumulate to a high concentration inside cells. Bacteria produce a complex cell envelope and possess drug export efflux pumps to limit drug accumulation inside cells. Decreasing cell envelope permeability and increasing efflux pump activity can reduce intracellular accumulation of antibiotics and are commonly seen in antibiotic-resistant strains. Here, we show that the balance between influx and efflux differs depending on bacterial growth phase in Gram-negative bacteria. Accumulation of the fluorescent compound ethidium bromide (EtBr) was measured in Salmonella enterica serovar Typhimurium SL1344 (wild type) and efflux deficient (ΔacrB) strains during growth. In SL1344, EtBr accumulation remained low, regardless of growth phase, and did not correlate with acrAB transcription. EtBr accumulation in the ΔacrB strains was high in exponential phase but dropped sharply later in growth, with no significant difference from that in SL1344 in stationary phase. Low EtBr accumulation in stationary phase was not due to the upregulation of other efflux pumps but instead was due to decreased permeability of the envelope in stationary phase. Transcriptome sequencing (RNA-seq) identified changes in expression of several pathways that remodel the envelope in stationary phase, leading to lower permeability. IMPORTANCE This study shows that efflux is important for maintaining low intracellular accumulation only in actively growing cells and that envelope permeability is the predominant factor in stationary-phase cells. This conclusion means that (i) antibiotics with intracellular targets may be less effective in complex infections with nongrowing or slow-growing bacteria, where intracellular accumulation may be low; (ii) efflux inhibitors may be successful in potentiating the activity of existing antibiotics, but potentially only for bacterial infections where cells are actively growing; and (iii) the remodeling of the cell envelope prior to stationary phase could provide novel drug targets.

The PAR promoter expression system: Modified lac promoters for controlled recombinant protein production in Escherichia coli.

Many commonly used bacterial promoters employed for recombinant protein production (RPP) in Escherichia coli are capable of high-level protein expression. However, such promoter systems are often too strong, being ill suited for expressing proteins that are difficult to fold, targeted to the membrane or secreted out of the cytoplasm. To circumvent this problem, a suite of bacterial promoters has been constructed with a range of different promoter strengths, assigning them specific "promoter activity ratings" (PARs). Selecting three of these PAR promoters, with low, intermediate and high strengths, it is demonstrated that the expression of target proteins, such as green fluorescent protein (GFP), human growth hormone (hGH) and single chain variable region antibody fragments (scFvs), can be set to three levels when expressed in E. coli. It is shown that the PAR promoter system is extremely flexible, operating in a variety of E. coli strains and under various different culture regimes. Furthermore, due to its tight regulation, it is shown that this system can also express a toxic outer membrane protein, at levels which do not affect bacterial growth. Thus, the PAR promoter system can be used to tailor the expression levels of target proteins in E. coli and maximize RPP.

Pellicle formation by Escherichia coli K-12: Role of adhesins and motility.

Initial work to generate physically robust biofilms for biocatalytic applications revealed that Escherichia coli K-12 can form a floating biofilm at the air-liquid interface, commonly referred to as a pellicle. Unlike other species where pellicle formation is well-characterised, such as Bacillus subtilis, there are few reports of E. coli K-12 pellicles in the literature. In order to study pellicle formation, a growth model was developed and pellicle formation was monitored over time. Mechanical forces, both motility and shaking, were shown to have effects on pellicle formation and development. The role and regulation of curli, an amyloid protein adhesin critical in E. coli K-12 biofilm formation, was studied by using promoter-green fluorescent protein reporters; flow cytometry and confocal laser scanning microscopy were used to monitor curli expression over time and in different locations. Curli were found to be not only crucial for pellicle formation, but also heterogeneously expressed within the pellicle. The components of the extracellular polymeric substances (EPS) in pellicles were analysed by confocal microscopy using lectins, revealing distinct pellicle morphology on the air-facing and medium-facing sides, and spatially- and temporally-regulated generation of the EPS components poly-N-acetyl glucosamine and colanic acid. We discuss the difference between pellicles formed by E. coli K-12, pathogenic E. coli strains and other species, and the relationship between E. coli K-12 pellicles and solid surface-attached biofilms.

Use of Transposon Directed Insertion-Site Sequencing to Probe the Antibacterial Mechanism of a Model Honey on E. coli K-12.

Antimicrobial resistance is an ever-growing health concern worldwide that has created renewed interest in the use of traditional anti-microbial treatments, including honey. However, understanding the underlying mechanism of the anti-microbial action of honey has been hampered due to the complexity of its composition. High throughput genetic tools could assist in understanding this mechanism. In this study, the anti-bacterial mechanism of a model honey, made of sugars, hydrogen peroxide, and gluconic acid, was investigated using genome-wide transposon mutagenesis combined with high-throughput sequencing (TraDIS), with the strain Escherichia coli K-12 MG1655 as the target organism. We identified a number of genes which when mutated caused a severe loss of fitness when cells were exposed to the model honey. These genes encode membrane proteins including those involved in uptake of essential molecules, and components of the electron transport chain. They are enriched for pathways involved in intracellular homeostasis and redox activity. Genes involved in assembly and activity of formate dehydrogenase O (FDH-O) were of particular note. The phenotypes of mutants in a subset of the genes identified were confirmed by phenotypic screening of deletion strains. We also found some genes which when mutated led to enhanced resistance to treatment with the model honey. This study identifies potential synergies between the main honey stressors and provides insights into the global antibacterial mechanism of this natural product.

Use of a model to understand the synergies underlying the antibacterial mechanism of H2O2-producing honeys.

Honey has been valued as a powerful antimicrobial since ancient times. However, the understanding of the underlying antibacterial mechanism is incomplete. The complexity and variability of honey composition represent a challenge to this scope. In this study, a simple model system was used to investigate the antibacterial effect of, and possible synergies between, the three main stressors present in honey: sugars, gluconic acid, and hydrogen peroxide (H2O2), which result from the enzymatic conversion of glucose on honey dilution. Our results demonstrated that the synergy of H2O2 and gluconic acid is essential for the antibacterial activity of honey. This synergy caused membrane depolarization, destruction of the cell wall, and eventually growth inhibition of E. coli K-12. The presence of H2O2 stimulated the generation of other long-lived ROS in a dose-dependent manner. Sugars caused osmosis-related morphological changes, however, decreased the toxicity of the H2O2/gluconic acid. The susceptibility of catalase and general stress response sigma factor mutants confirmed the synergy of the three stressors, which is enhanced at higher H2O2 concentrations. By monitoring cellular phenotypic changes caused by model honey, we explained how this can be bactericidal even though the antimicrobial compounds which it contains are at non-inhibitory concentrations.

Non-pathogenic Escherichia coli biofilms: effects of growth conditions and surface properties on structure and curli gene expression.

Biofilm formation is a harmful phenomenon in many areas, such as in industry and clinically, but offers advantages in the field of biocatalysis for the generation of robust biocatalytic platforms. In this work, we optimised growth conditions for the production of Escherichia coli biofilms by three strains (PHL644, a K-12 derivative with enhanced expression of the adhesin curli; the commercially-used strain BL21; and the probiotic Nissle 1917) on a variety of surfaces (plastics, stainless steel and PTFE). E. coli PHL644 and PTFE were chosen as optimal strain and substratum, respectively, and conditions (including medium, temperature, and glucose concentration) for biofilm growth were determined. Finally, the impact of these growth conditions on expression of the curli genes was determined using flow cytometry for planktonic and sedimented cells. We reveal new insights into the formation of biofilms and expression of curli in E. coli K-12 in response to environmental conditions.

Flow Cytometric Analysis of Efflux by Dye Accumulation.

Gram-negative infections are increasingly difficult to treat because of their impermeable outer membranes (OM) and efflux pumps which maintain a low intracellular accumulation of antibiotics within cells. Historically, measurement of accumulation of drugs or dyes within Gram-negative cells has concentrated on analyzing whole bacterial populations. Here, we have developed a method to measure the intracellular accumulation of ethidium bromide, a fluorescent DNA intercalating dye, in single cells using flow cytometry. Bacterial cells were stained with SYTOTM 84 to easily separate cells from background cell debris. Ethidium bromide fluorescence was then measured within the SYTOTM 84 positive population to measure accumulation. In S. Typhimurium SL1344, ethidium bromide accumulation was low, however, in a number of efflux mutants, accumulation of ethidium bromide increased more than twofold, comparable to previous whole population analysis of accumulation. We demonstrate simultaneous measurement of ethidium bromide accumulation and GFP allowing quantification of gene expression or other facets of phenotype in single cells. In addition, we show here that this assay can be adapted for use with efflux inhibitors, with both Gram-negative and Gram-positive bacteria, and with other fluorescent substrates with different fluorescence spectra.

Antibacterial effect of graphene oxide (GO) nano-particles against Pseudomonas putida biofilm of variable age.

Graphene oxide (GO) has been reported to possess antibacterial activity; therefore, its accumulation in the environment could affect microbial communities such as biofilms. The susceptibility of biofilms to antimicrobials is known to depend on the stage of biofilm maturity. The aim of this study was to investigate the effect of GO nano-particles on Pseudomonas putida KT2440 biofilm of variable age. FT-IR, UV-vis, and Raman spectroscopy confirmed the oxidation of graphene while XPS confirmed the high purity of the synthesised GO over 6 months. Biofilms varying in maturity (24, 48, and 72 h) were formed using a CDC reactor and were treated with GO (85 µg/mL or 8.5 µg/mL). The viability of P. putida was monitored by culture on media and the bacterial membrane integrity was assessed using flow cytometry. P. putida cells were observed using confocal microscopy and SEM. The results showed that GO significantly reduced the viability of 48-h biofilm and detached biofilm cells associated with membrane damage while the viability was not affected in 24- and 72-h biofilms and detached biofilm cells. The results showed that susceptibility of P. putida biofilm to GO varied according to age which may be due to changes in the physiological state of cells during maturation. Graphical abstract.

Flow cytometry and growth-based analysis of the effects of fruit sanitation on the physiology of Escherichia coli in orange juice.

Chlorine-based solutions are commonly used to sanitize orange fruits prior to juice extraction. We used flow cytometry (FCM) to investigate the physiology of Escherichia coli following its subjection to chlorine-based solutions and alternative sanitizing agents (H2O2 and organic acids). Green fluorescent protein (GFP)-generating E. coli K-12 were washed with 50-200 ppm available chlorine (AC), 1%-5% H2O2, 2%-4% citric acid, 4% acetic acid, or 4% lactic acid, after which they were added to 1.2 µm-filtered orange juice (OJ). Cell physiology was investigated with FCM during storage at 4°C, and culturability was determined using plate counting. Analysis of GFP fluorescence allowed estimation of intracellular pH (pH i ). FCM results demonstrated an inverse relationship between the concentration of AC or H2O2 and cellular health in OJ. Higher concentrations of sanitizer also resulted in a significantly greater number of viable but nonculturable (VBNC) cells. Real-time FCM showed that supplementation of AC with 2% citric acid, but not with 100 ppm of Tween-80, led to a significant reduction in pH i of the cells incubated in OJ, and that the majority of the reduction in pH i occurred during the first 2 min of incubation in OJ. Organic acids were found to be more effective than both AC and H2O2 in reducing the pH i , viability, and culturability of the cells in OJ. The results confirmed the hypothesis that consecutive subjection of E. coli to maximum legally permitted concentrations of sanitizers and OJ induces the VBNC state. Furthermore, we demonstrate successful application of FCM for monitoring the efficacy of washing procedures.

Use of a design of experiments approach to optimise production of a recombinant antibody fragment in the periplasm of Escherichia coli: selection of signal peptide and optimal growth conditions.

Production of recombinant proteins such as antibody fragments in the periplasm of the bacterium Escherichia coli has a number of advantages, including the ability to form disulphide bonds, aiding correct folding, and the relative ease of release and subsequent capture and purification. In this study, we employed two N-terminal signal peptides, PelB and DsbA, to direct a recombinant scFv antibody (single-chain variable fragment), 13R4, to the periplasm via the Sec and SRP pathways respectively. A design of experiments (DoE) approach was used to optimise process conditions (temperature, inducer concentration and induction point) influencing bacterial physiology and the productivity, solubility and location of scFv. The DoE study indicated that titre and subcellular location of the scFv depend on the temperature and inducer concentration employed, and also revealed the superiority of the PelB signal peptide over the DsbA signal peptide in terms of scFv solubility and cell physiology. Baffled shake flasks were subsequently used to optimise scFv production at higher biomass concentrations. Conditions that minimised stress (low temperature) were shown to be beneficial to production of periplasmic scFv. This study highlights the importance of signal peptide selection and process optimisation for the production of scFv antibodies, and demonstrates the utility of DoE for selection of optimal process parameters.