RESUMEN
A three-dimensional heterobimetallic porous structure with the formula {[Y3.5Tb1.5L6(OH)3(H2O)1.5 (DMF)1.5] n ·1.5H2O·DMF} n (L = 3-amino-4-hydroxybenzoate) (Y/Tb-MOF) has been synthesized and characterized by single crystal and powder X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), inductively coupled plasma mass spectrometry (ICP-MS), electrophoretic mobility, and Fourier transform infrared (FTIR) spectroscopy. The structure presents two metal environments: a bioaugmented isosceles wedge (mm2) MO8 and a tricapped trigonal prism (-6m2) MN3O6. These configurations facilitate the creation of channels with a diameter of 10.7 Å, enabling its utilization as an active catalyst where the heterobimetallic nature of the assembly will be explored. This mixed-metal metal-organic framework has been tested in the cycloaddition of epoxides with carbon dioxide as well as in the cyanosilylation and hydroboration reactions of carbonylic substrates. Additionally, a monometallic Tb-MOF analogue has been synthesized for comparative evaluation of their catalytic performances. Both the mixed metal and monometallic variants exhibit outstanding activity in the cyanosilylation and hydroboration of carbonyls and in the synthesis of carbonates under CO2 pressure. However, only the latter exhibits high recyclability.
RESUMEN
Thermoplastic starch/polyvinyl alcohol (TPS/PVA) films have limitations for being used in long-term applications due to starch retrogradation. This leads to plasticizer migration, especially when low molecular weight plasticizers such as glycerol, are used. In this work, we employed mixtures of oligomers based on glycerol citrates with higher molecular weight than glycerol as plasticizers for potato-based TPS/PVA blends obtained by melt-mixing. This constitutes an alternative to reduce plasticizer migration while keeping high swelling degree, and to provide high mechanical performance. The novelty lies in the usage of these oligomers by melt-mixing technique, aspect not deeply explored previously and that represents the first step towards industrial scalability. Prior to the blending process, oligomers mixtures were prepared with different molar ratios of citric acid (0-40 mol%) and added them. This minimizes the undesirable hydrolysis effect of free carboxylic groups on starch chains. The results demonstrated that the migration of plasticizers in TPS/PVA blends decreased by up to 70 % when the citric acid content increased. This reduction was attributed to the higher molecular weight (the majority in the range 764-2060 Da) and the 3D structure of the oligomers compared to using raw glycerol. Furthermore, the films exhibited a 150 % increase in Young's modulus and tensile strength without a reduction in elongation at break, while maintaining a high gel content, due to a moderate crosslinking.
Asunto(s)
Plastificantes , Alcohol Polivinílico , Alcohol Polivinílico/química , Plastificantes/química , Glicerol/química , Poliésteres , Ácido Cítrico/química , Almidón/químicaRESUMEN
Here we report catalytic asymmetric hydrophosphination of α,ß-unsaturated carbonyl derivatives using a chiral Mn(I) complex as a catalyst. Through H-P bond activation, various phosphine-containing chiral products can be accessed via hydrophosphination of various ketone-, ester-, and carboxamide-based Michael acceptors.
RESUMEN
Olefins are ubiquitous in biologically active molecules and frequently used as building blocks in chemical transformations. However, although many strategies exist for the synthesis of stereodefined E-olefines, their thermodynamically less stable Z counterparts are substantially more demanding, while access to those bearing an allylic stereocenter with an adjacent reactive functionality remains unsolved altogether. Even the classic Wittig reaction, arguably the most versatile and widely used approach to construct Z-alkenes, falls short for the synthesis of these particularly challenging yet highly useful structural motives. Here, we report a general methodology for Z-selective synthesis of functionalized chiral alkenes that establishes readily available alkene-derived phosphines as an alternative to alkylating reagents in Wittig olefination, thus offering previously unidentified retrosynthetic disconnections for the formation of functionalized disubstituted alkenes. We demonstrate the potential of this method by structural diversification of several bioactive molecules.
RESUMEN
A new family of metal-organic frameworks (MOFs) named GR-MOFs with the chemical formula {[M x (BCA) y ](H2O) z (DMF) w } (x,y,z,w: 1,1,2,0; 1,1.5,0,1; 1,2,2,1; and 1,1,0,2 for GR-MOF-11 to 14, respectively) based on s-block [M: Sr (GR-MOF-11), Ba (GR-MOF-14)] and d-block [M: Y (GR-MOF-12) and Cd (GR-MOF-13)] metals together with the biquinoline ligand 2,2'-bicinchoninic acid (H2BCA) has been synthetized by a solvothermal route and fully characterized by elemental and thermogravimetric analysis, Fourier transform infrared spectroscopy, photoluminescence, particle size distribution through optical microscopy, electrophoretic mobility, and finally, X-ray single-crystal and powder diffraction. The structural characterization reveals that these 2D and 3D MOFs possess a rich variety of coordination modes that maintained the Janus-head topology on the ligand in most of the cases. The new MOFs were studied in the catalyzed cyanosilylation and hydroboration of an extensive group of aldehydes and ketones, wherein the s-block metal-based MOFs GR-MOF-11 and GR-MOF-14 provided the highest efficiency ever reported in the MOF-catalyzed cyanosilylation of carbonyl compounds by using only 0.5 mol % of catalyst loading, room temperature, and solvent-free conditions. Furthermore, the hydroboration of ketones has been reported for the first time with this type of s-block metal catalysts obtaining from moderate to good conversions.
RESUMEN
The development of new applications of graphene oxide in the biomedical field requires the covalent bonding of bioactive molecules to a sheet skeleton. Obtaining a large carboxyl group population over the surface is one of the main targets, as carboxyl group concentration in conventional graphene oxide is low among a majority of non-useful sp3-C-based functionalities. In the present work, we propose a selective method that yields an impressive increase in carboxyl group population using single-layer, thermally reduced graphene oxide as a precursor in a conventional Hummers-Offemann reaction. When starting with a reduced graphene oxide with no interlayer registry, sulfuric acid cannot form a graphite intercalated compound. Then, potassium permanganate attacks in in-plane (vacancies or holes) structural defects, which are numerous over a thermally reduced graphene oxide, as well as in edges, yielding majorly carboxyl groups without sheet cutting and unzipping, as no carbon dot formation was observed. A single-layer precursor with no ordered stacking prevents the formation of an intercalated compound, and it is this mechanism of the potassium permanganate that results in carboxyl group formation and the hydrophilic character of the compound.
RESUMEN
A new Y-based metal-organic framework (MOF) GR-MOF-6 with a chemical formula of {[YL(DMF)2]·(DMF)}n {H3L = 5-[(4-carboxyphenyl)ethynyl] isophthalic acid; DMF = N,N-dimethylformamide} has been prepared by a solvothermal route. Structural characterization reveals that this novel material is a three-dimensional MOF in which the coordination of the tritopic ligand to Y(III) metal ions leads to an intercrossing channel system extending over three dimensions. This material has proven to be a very efficient catalyst in the cyanosilylation of carbonyls, ranking second in catalytic activity among the reported rare earth metal-based MOFs described so far but with the lowest required catalyst loading. In addition, its electrophoretic behavior has been studied in depth, providing a zero-charge point between pH 4 and 5, a peak electrophoretic mobility of -1.553 µm cm V-1 s-1, and a ζ potential of -19.8 mV at pH 10.
RESUMEN
Here we report that chiral Mn(I) complexes are capable of H-P bond activation. This activation mode enables a general method for the hydrophosphination of internal and terminal α,ß-unsaturated nitriles. Metal-ligand cooperation, a strategy previously not considered for catalytic H-P bond activation, is at the base of the mechanistic action of the Mn(I)-based catalyst. Our computational studies support a stepwise mechanism for the hydrophosphination and provide insight into the origin of the enantioselectivity.
RESUMEN
A new porous metal-organic framework (MOF) with the chemical formula [Y5L6(OH)3(DMF)3]·5H2O (1) (where L = 3-amino-4-hydroxybenzoate) has been prepared by a solvothermal procedure. The structural characterization reveals that this material consists of a robust three-dimensional metal-organic framework (MOF) grown with clusters formed by Y(iii) and hydroxide anions joined to one another by the ligand, giving rise to an open structure with interconnected microchannels with variable dimensions. This assembled set has shown to possess a fascinating catalytic activity for the cyanosilylation of a broad range of aldehydes and ketones with exceptional recyclability, a solvent-free medium, and one order of magnitude lower catalyst loading compared to all related lanthanide-based MOFs described so far in the literature.
RESUMEN
Two-step dearomative functionalization of naphthols promoted by Lewis acids and copper(I) catalysis was developed. Initially, Lewis acid complexation inverted the electronic properties of the ring and established an equilibrium with the dearomatized counterpart. Subsequent trapping of the dearomatized intermediate with organometallics as well as organophosphines was demonstrated and provided the corresponding dearomatized products.
RESUMEN
Here we show trapping of chiral enolates with carbenium ions, Michael acceptors, and bromine. Silyl ketene aminals, disilyl acetals, and aza-enolates were obtained via Lewis acid mediated enantioselective conjugate addition of Grignard reagents to unsaturated amides, carboxylic acids and alkenyl heterocycles.
RESUMEN
The remarkable activity displayed by copper(I)-phosphinite complexes of general formula [CuBr(L)] in two challenging cycloadditions is reported: a)â the one-pot azidonation/cycloaddition of boronic acids, NaN3, and terminal alkynes; b)â the cycloaddition of azides and iodoalkynes. These air-stable catalysts led to very good results in both cases and the expected triazoles could be isolated in pure form under 'Click-suitable' conditions.