Si-doped carbonized polymer dot as robust hydrophilic coating using for high efficiency antifogging.

Hydrophilic coating can prevent surface from fogging but its application is limited by low mechanical performance. In this study, a hydrophilic coating was prepared by crosslinking the Si-doped carbonized polymer dot (Si-CPD) with 3-glycidyloxypropyltrimethoxysilane (GPTMS) and ethylene oxide (EO). The hydrophilic coating can be used as robust hydrophilic anti-fogging coating. The Si-CPD derived from ethylene diamine tetraacetic acid (EDTA) and aminopropyl oligosiloxanes (APOS) was successfully prepared via one-step hydrothermal method. Then, a resin solution was prepared by mixing Si-CPD, GPTMS and EO. Epoxy group of GPTMS and EO can react with amino group of Si-CPD. Finally, a composite coating with antifogging function can be obtained by simple heating curing. Due to the introduction of hydroxyl which derived from EO, the coating shows excellent antifogging performance. Meanwhile, the presence of inorganic component endows the coating with outstanding mechanical performance. The coating has great potential in related applications, such as optical lenses, mirrors and other transparency substrates.

Bulk CsPbClxBr3-x (1 ≤ x ≤ 3) perovskite nanocrystals/polystyrene nanocomposites with controlled Rayleigh scattering for light guide plate.

Perovskite nanocrystals (PNCs)/polymer nanocomposites can combine the advantages of each other, but extremely few works can achieve the fabrication of PNCs/polymer nanocomposites by bulk polymerization. We originally adopt a two-type ligand strategy to fabricate bulk PNCs/polystyrene (PS) nanocomposites, including a new type of synthetic polymerizable ligand. The CsPbCl3 PNCs/PS nanocomposites show extremely high transparency even the doping content up to 5 wt%. The high transparency can be ascribed to the Rayleigh scattering as the PNCs distribute uniformly without obvious aggregation. Based on this behavior, we first exploit the potential of PNCs to serve as scatters inside light guided plate (LGP), whose surface illuminance and uniformity can be improved, and this new kind of LGP is compatible with the advanced liquid crystal display technology. Thanks to the facile composition adjustment of CsPbClxBr3-x (1 ≤ x ≤ 3) PNCs, the Rayleigh scattering behavior can also be adjusted so as to the performance of LGP. The best-performing 5.0-inch LGP based on CsPbCl2.5Br0.5 PNCs/PS nanocomposites shows 20.5 times higher illuminance and 1.8 times higher uniformity in display than the control. The LGP based on PNCs/PS nanocomposite exhibits an enormous potential in commercialization no matter based on itself or combined with the LGP-related technology.

Brain-targeted ginkgolide B-modified carbonized polymer dots for alleviating cerebral ischemia reperfusion injury.

Ischemic stroke (IS) is a leading cause of death in the world, and there is still a lack of effective treatments. Ginkgolide B (GB) can antagonize the platelet activating factor receptor and has shown a significant curative effect on cerebral ischemia. However, GB and other drugs for IS have shown poor clinical efficacy due to their inability to cross the blood-brain barrier (BBB). Herein, red fluorescent carbonized polymer dots (CPDs) were developed as biocompatible nanocarriers to deliver GB to the brain tissue. Both in vivo and in vitro experiments verified the ability of GB-CPDs to penetrate the BBB, and GB-CPDs remained in the brain significantly longer than unmodified CPDs. In a rat model of middle cerebral artery occlusion (MCAO), circulatory administration of GB-CPDs effectively reduced cerebral infarct size and neuronal apoptosis, with a significantly better therapeutic effect compared to GB. This study provided a novel GB-based nanodrug that could target the brain with improved efficacy, showing great application potential in central nervous system diseases.

Flexible Transparent Hydrophobic Coating Films with Excellent Scratch Resistance Using Si-Doped Carbonized Polymer Dots as Building Blocks.

Flexible transparent hydrophobic coating films with excellent scratch resistance have important applications in many fields, especially for optical materials. Herein, a hydrophobic composite coating film was prepared and used as a polymer film protective material by combining 3-glycidyloxypropyltrimethoxysilane (GPTMS)-modified Si-doped carbonized polymer dots (Si-CPDs) with mono-trimethoxysilyl-terminated poly(dimethyl siloxane) (PDMS). The Si-CPDs derived from tetramethyl disiloxane propylamine tetraacetic acid and multi-amino oligosiloxanes were successfully prepared via one-step hydrothermal method and then grafted by GPTMS to obtain modified Si-CPDs (mSi-CPDs). Among them, mSi-CPDs act as a matrix layer, and PDMS acts as a low-surface energy layer. Cross-linking the Si-O-Si network of the coating film was formed through sol-gel chemistry. Driven by the hydrophilic-hydrophobic effect, PDMS trends to aggregate at the film surface, thus avoiding the phase separation which can affect transparency. The highly cross-linked network and the presence of hard silica core provide a high hardness to stand the steel-wool scratch. Flexible polymer chains impart the coating film an outstanding bendability. Introduction of PDMS makes the coating film possess hydrophobicity and anti-graffiti function.

Soft-Hard Segment Combined Carbonized Polymer Dots for Flexible Optical Film with Superhigh Surface Hardness.

The rapid development of optical and electronic devices has driven up the demand of high performance optical protective films to avoid exterior influence and extend the service life. But it is not easy to obtain an ideal coating film with high transmittance, high hardness, and good flexibility. Herein, by taking advantage of the special core-shell structure of carbonized polymer dots (CPDs), we propose a strategy to build up a nanoscale soft-hard segment microstructure for optical protective coating materials. The CPDs with hard core and soft polymer chain shell are prepared from citric acid and (3-aminopropyl)triethoxysilane. The as-prepared CPDs can be converted directly to the coating film by the dehydration and cross-linking. In addition to the good optical transmittance, the final film exhibits simultaneously ultrahigh 9H pencil hardness to stand 4000 cycles of a steel-wool wear test, and excellent flexibility to stand bending and rolling-up.