Revitalizing plastic wastes employing bio-circular-green economy principles for carbon neutrality.

The use of plastics has become deeply ingrained in our society, and there are no indications that its prevalence will decrease in the foreseeable future. This article provides a comprehensive overview of the global plastic waste disposal landscape, examining it through regional perspectives, various management technologies (dumping or landfilling, incineration, and reuse and recycling), and across different sectors including agriculture and food, textile, tourism, and healthcare. Notably, this study compiles the findings on life-cycle carbon footprints associated with various plastic waste management practices as documented in the literature. Employing the bio-circular-green economy model, we advocate for the adoption of streamlined and sustainable approaches to plastic management. Unique management measures are also discussed including the utilization of bioplastics combined with smart and efficient collection processes that facilitate recycling, industrial composting, or anaerobic digestion. Moreover, the integration of advanced recycling methods for conventional plastics with renewable energy, the establishment of plastic tax and credits, and the establishment of extended producer responsibility are reviewed. The success of these initiatives relies on collaboration and support from peers, industries, and consumers, ultimately contributing to informed decision-making and fostering sustainable practices in plastic waste management.

Electroneutralization desalination with spontaneous chemoelectric power generation.

This study designs a novel electroneutralization desalination cell using reaction heat from acidic-alkaline wastewater neutralization to desalinate wastewater and generates chemoelectric power. Several key performance indicators are measured in terms of the energy, environmental and economic aspects of the system, including the ionic flux, the electrical energy produced, the electrical energy consumption for desalination, parasitic losses, overall energy conversion efficiency and desalination performance. The maximum peak power density is ∼31.5 mW/cm2 at 83.5 mA/cm2 and the desalination efficiency is 62 % using brine. The overall energy conversion efficiency is ∼81.8 % and the desalination followed the zero-order reaction. Assuming a 1.5 million litres per day treatment capacity integrated with reverse osmosis, the system has environmental and economic benefits, with 44.5 kg-CO2eq greenhouse gas emissions per cubic meter of treated brine, and a discounted payback period of 4.2 years. This study demonstrates a pioneering electroneutralization technique for self-sufficient brine valorization and wastewater reclamation.

Towards sustainable management of polyacrylamide in soil-water environment: Occurrence, degradation, and risk.

Polyacrylamide (PAM) possesses unique characteristics, including high water solubility, elevated viscosity and effective flocculation capabilities. These properties make it valuable in various sectors like agriculture, wastewater treatment, enhanced oil recovery, and mineral processing industries, contributing to a continually expanding market. Despite its widespread use globally, understanding its environmental fate at the soil-water interface remains limited. This article aims to provide an overview of the occurrence, degradation pathways, toxicity, and risks associated with PAM in the bioenvironment. The findings indicate that various degradation pathways of PAM may occur in the bioenvironment through mechanical, thermal, chemical, photocatalytic degradation, and/or biodegradation. Through a series of degradation processes, PAM initially transforms into oligomers and acrylamide (AM). Subsequently, AM may undergo biodegradation, converting into acrylic acid (AA) and other compounds such as ammonia. Notably, among these degradation intermediates, AM demonstrates high biodegradability, and the bioaccumulations of both AM and AA are not considered significant. Ensuring the sustainable use of PAM necessitates a comprehensive understanding among policymakers, scholars, and industry professionals regarding PAM, encompassing its properties, applications, degradation pathways, toxic effect on humans and the environment, and relevant regulations. Additionally, this study offers insights into future priority research directions, such as establishing of a reliable source-to-destination supply chain system, determining the maximum allowable amount for PAM in farmlands, and conducting long-term trials for the PAM-containing demolition residues.

Tip and heterogeneous effects co-contribute to a boosted performance and stability in zinc air battery.

The zinc-air battery (ZAB) performance and stability strongly depend on the structure of bifunctional electrocatalyst for oxygen reduction/evolution reaction (ORR/OER). In this work, we combine the tip and heterogeneous effects to construct cobalt/cobalt oxide heterostructure nanoarrays (Co/CoO-NAs). Due to the formed heterostructure, more oxygen vacancies are found for Co/CoO-NAs resulting in a 1.4-fold higher ORR intrinsic activity than commercial carbon supported platinum electrocatalyst (Pt/C) at 0.8 V versus reversible hydrogen electrode (vs. RHE). Moreover, a fast surface reconstruction is observed for Co/CoO-NAs during OER catalysis evidenced by in-situ electrochemical impedance spectroscopy and Raman tests. In addition, the tip effect efficiently lowers the mass transfer resistance triggering a low overpotential of 347 mV at 200 mA cm-2 for Co/CoO-NAs. The strong electronic interplay between cobalt (Co) and cobalt oxide (CoO) contributes to a stable battery performance during 1200 h galvanostatic charge-discharge test at 5 mA cm-2. This work offers a new avenue to construct high-performance and stable oxygen electrocatalyst for rechargeable ZAB.

Unraveling the Potential of Electrochemical pH-Swing Processes for Carbon Dioxide Capture and Utilization.

Global warming, driven by the accumulation of anthropogenic greenhouse gases, particularly CO2, in the atmosphere, has garnered significant attention due to its detrimental environmental impacts. To combat this critical issue, the deployment of CO2 capture and utilization (CCU) strategies has been considered as one of the technology-based solutions, leading to extensive scientific and engineering research. Electrochemical pH-swing (EPS) processes offer a promising approach to diverse CCU pathways, such as the delivery of pure CO2 gas, the delivery of bicarbonate (e.g., for microalgae cultivation), and the formation of carbonate minerals. In this study, we discuss several CCU pathways using EPS and provide an in-depth analysis of its mechanisms and potential applications, outlining its limitations from both thermodynamic and kinetic standpoints. The EPS process has demonstrated remarkable capabilities, achieving a CO2 capture efficiency of over 90% and unlocking valuable opportunities for CCU applications. We also develop an initial techno-economic assessment and provide the perspectives and challenges for future development and deployment of EPS. This study sheds light on the integration of EPS with CCU, closing the carbon cycle by effectively utilizing the products generated through the process, such as carbonate minerals and bicarbonate solution. For instance, the bicarbonate product can serve as a viable feedstock for bicarbonate-based microalgae production systems, with the added benefit of reducing costs by 40-80% compared to traditional gaseous CO2 delivery approaches. By integration of electrochemical technologies with CCU methods, this study underscores the immense potential for mitigating CO2 emissions and advancing sustainable practices to combat global warming. This study not only addresses the urgent need for effective solutions but also paves the way for a greener and more sustainable future.

Hydrazine-Assisted Acidic Water Splitting Driven by Iridium Single Atoms.

Water splitting, an efficient technology to produce purified hydrogen, normally requires high cell voltage (>1.5 V), which restricts the application of single atoms electrocatalyst in water oxidation due to the inferior stability, especially in acidic environment. Substitution of anodic oxygen evolution reaction (OER) with hydrazine oxidation reaction (HzOR) effectually reduces the overall voltage. In this work, the utilization of iridium single atom (Ir-SA/NC) as robust hydrogen evolution reaction (HER) and HzOR electrocatalyst in 0.5 m H2 SO4 electrolyte is reported. Mass activity of Ir-SA/NC is as high as 37.02 A mgIr -1 at overpotential of 50 mV in HER catalysis, boosted by 127-time than Pt/C. Besides, Ir-SA/NC requires only 0.39 V versus RHE to attain 10 mA cm-2 in HzOR catalysis, dramatically lower than OER (1.5 V versus RHE); importantly, a superior stability is achieved in HzOR. Moreover, the mass activity at 0.5 V versus RHE is enhanced by 83-fold than Pt/C. The in situ Raman spectroscopy investigation suggests the HzOR pathway follows *N2 H4 →*2NH2 →*2NH→2N→*N2 →N2 for Ir-SA/NC. The hydrazine assisted water splitting demands only 0.39 V to drive, 1.25 V lower than acidic water splitting.

Enhanced biomethane production with a low carbon footprint via anaerobic co-digestion of swine wastewater with rice husk.

An electricity-assisted anaerobic co-digestion (EAAD) process was developed and compared with conventional anaerobic co-digestion (AD) using piggery wastewater and rice husk as feedstocks. Various methodologies, including kinetic models, microbial community analyses, life-cycle carbon footprints, and preliminary economic analysis, were integrated to comprehensively evaluate the performance of the two processes. The results demonstrated that EAAD exhibited a positive improvement of 2.6 % to 14.5 % in biogas production compared to AD. The suitable wastewater-to-husk ratio for EAAD was found to be 3:1, which corresponded to a carbon-to­nitrogen ratio of approximately 14. This ratio demonstrated positive co-digestion effects and electrical enhancements in the process. According to the modified Gompertz kinetics, the biogas production rate in EAAD ranged from 1.87 to 5.23 mL/g-VS/d, significantly higher than the range of 1.19 to 3.74 mL/g-VS/d observed in AD. The study also investigated the contributions of acetoclastic and hydrogenotrophic methanogens to biomethane formation, revealing that acetoclastic methanogens accounted for 56.6 % ± 0.6 % of the methane production, while hydrogenotrophic methanogens contributed to 43.4 % ± 0.6 %. No significant difference in the methanogenic reaction pathways was observed between AD and EAAD, indicating that the introduction of an external electric field did not alter the predominant pathways (p > 0.05, two-sample t-test). Furthermore, retrofitting existing AD plants with EAAD units can reduce the carbon intensity of piggery wastewater treatment by 17.6 % to 21.7 %. The preliminary economic analysis indicated a benefit-cost ratio of 1.33 for EAAD, confirming the feasibility of implementing EAAD for wastewater treatment while simultaneously producing bioenergy. Overall, this study provides valuable insights into upgrading the performance of existing AD plants by introducing an external electric field. It demonstrates that EAAD can achieve higher and cost-effective biogas production with a lower life-cycle carbon footprint, thus enhancing the sustainability and efficiency of the biogas production process.

Chitosan cross-linked ß-cyclodextrin polymeric adsorbent for the removal of perfluorobutanesulfonate from aqueous solution: adsorption kinetics, isotherm, and mechanism.

The existence of per- and polyfluoroalkyl substances (PFASs) in water is of serious interest due to their toxic, bioaccumulative, and persistent nature, and adsorption is an effective approach for the PFASs removal. In the present study, we developed a polymeric adsorbent by cross-linking chitosan and ß-cyclodextrin using glutaraldehyde (Chi-Glu-ß-CD) and evaluated its removal performance for perfluorobutanesulfonate (PFBS) from water. The results indicate that the performance was highly affected by solution pH; under a more acidic condition (e.g., pH 2.0), a higher removal efficiency was detected, and faster adsorption kinetics was observed with the rate constant (k2) of 0.001 ± 3×10-4 g mg-1 min-1. Adsorption isotherm data agreed to the Sips model with a maximum heterogeneous adsorption capacity of 135.70 ± 25.70 mg g-1, probably due to protonated amine (NH+) and electron-deficient ß-CD cavities. The adsorption mechanism was confirmed using energy dispersive X-ray and Fourier transform infrared (FTIR) spectroscopy, showing the role of electrostatic attractions between the protonated amine and the negatively charged PFBS molecule (especially, with sulfonate side (N-H--O-S)) and host-guest inclusion formations with ß-CD cavity in adsorption. Additionally, the synthesized adsorbent was recovered using methanol without any significant decline in adsorption efficiency even after four continuous adsorption/desorption cycles. All these findings suggested that the Chi-Glu-ß-CD composite could be a promising adsorbent in the removal of PFBS from water.

Efficient alkaline water splitting catalyzed by ultrafine rhodium telluride nanoparticles.

In this study, we report an efficient bifunctional electrocatalyst of rhodium telluride (RhTe2) for alkaline water splitting. With the construction of Rh-Te bonds, the catalytic performance as well as stability are boosted.

Catalytic Processes to Accelerate Decarbonization in a Net-Zero Carbon World.

Reducing carbon dioxide emissions is one of the critical challenges to mitigate global climate change, which is having detrimental impacts on society and the environment. Fossil fuel combustion in transportation, power generation, and industrial processes is the dominant contributor to carbon emissions. Over the past decades, sustainable solutions and strategies have been investigated and developed to enable decarbonization. Catalysis plays an essential role to address this global challenge by increasing energy efficiency, reducing carbon emissions, capturing carbon dioxide, and utilizing clean energy sources to displace fossil fuels. In this Review, the role of catalysis in reducing energy demand was discussed, enhancing process efficiency, displacing carbon-intensive feedstocks and products, and therefore, reducing carbon emissions. Recent advances in catalyst development were summarized, focusing on applications to enhance industrial processes efficiency and enable utilization of clean energy sources. Emerging approaches in catalysis were reviewed, including the manufacture of iron and steel, direct air capture of CO2 , production of ethylene, ammonia, and sustainable aviation fuels, plastic recycling, and the synthesis of biobased plastics. The Review was concluded with suggested research directions to achieve a carbon net-zero world.

Anaerobic swine digestate valorization via energy-efficient electrodialysis for nutrient recovery and water reclamation.

The development of cost-effective and energy-efficient technologies to recover nutrients from digestate is important. Anaerobic digestate can be concentrated into bio-nutrient products through an electrodialysis (ED) process in an energy-efficient manner. Despite recent advances, the operation modes of ED for nutrient recovery from swine digestate are yet to be systematically evaluated from the perspective of energy-water efficiencies, and the determination of optimal operations in ED units is still ambiguous. In this study, two different operating modes of electrodialysis, i.e., constant voltage and constant current, are designed to evaluate the energy efficiency and effectiveness of nutrient recovery from anaerobic swine digestate. The ion removal ratio and current efficiency of the different modes and their associated electromigration performance (e.g., rate constants) are evaluated. The results indicate that the maximum removal efficiency (in terms of electrical conductivity) is 92.8% at a cell voltage of 2.4 V/cell using the constant voltage operation. The current efficiencies of NH4+ (43‒65%) are higher than that of other ions, such as K+ (12‒19%), Cl- (4‒7%), and PO43- (0.1‒1.5%). For nitrogen recovery, the required energy consumption was about 0.24‒15.2 kWh/kg-N (0.86‒54.7 kJ/g-N), corresponding to a removal ratio of ammonium from 70.8% to 99.1%. Based on the experimental data, the optimal operating conditions are identified using response surface models by considering process energy consumption and productivity to deliver energy-efficient nutrient separation. One candidate of the ideal conditions to achieve the total ion removal of ∼93% should be operated at a constant cell voltage of 1.15 V, corresponding to a productivity of 5.24 gal/hr/m2 at an energy consumption of 0.44 kWh/m3. Last, a conceptual design of cascading separation processes is proposed for digestate valorization as biofertilizers, nutrients, organic acids, and reclaimed water. A preliminary benefit-cost evaluation is then performed to evaluate the engineering and economic performance of the developed process for nutrient recovery from swine digestate. This article provides insight into practical large-scale applications of digestate valorization through energy-efficient separation, thereby realizing a circular economy system and a decarbonizing supply chain of bio-nutrients.

An overview of deploying membrane bioreactors in saline wastewater treatment from perspectives of microbial and treatment performance.

The discharged saline wastewater has severely influenced the aquatic environment as the treatment performance of many wastewater treatment techniques is limited. In addition, the sources of saline wastewater are also plentiful from agricultural and various industrial fields such as food processing, tannery, pharmaceutical, etc. Although high salinity levels negatively impact the performance of both physicochemical and biological processes, membrane bioreactor (MBR) processes are considered as a potential technology to treat saline wastewater under different salinity levels depending on the adaption of the microbial community. Therefore, this study aims to systematically review the application of MBR widely used in the saline wastewater treatment from the perspectives of microbial structure and treatment efficiencies. At last, the concept of carbon dioxide capture and storage will be proposed for the MBR-treating saline wastewater technologies and considered toward the circular economy with the target of zero emission.

Evaluation of the dual-process approach for in-situ groundwater arsenic removal.

While the worldwide distribution of geogenic arsenic (As)-affected groundwater is highly overlapped with the areas with abundant groundwater, utilization of As-contained groundwater is an inevitable compromise in those areas where surface water is not enough for irrigation. Since the occurrence of As in groundwater is often accompanied by high iron (Fe) contents, the facilitation of As and Fe precipitation without adding additional oxidizers and adsorbents is considered an environmental-friendly approach to removing As in groundwater. In the present study, the oxidation/filtration dual-process with sprinkling height of 25 cm and 120 kg filter media efficiently increased the dissolved oxygen (DO) concentration (0.36-1.52 mg/L) and oxidation-reduction potential (ORP) (24-63 mV), which facilitated the formation of Fe oxides and As co-precipitation. The correlation of As removal efficiencies with their respective flow rates indicated that a decrease in groundwater Fe and an increase of Fe in sands and gravels filters as the flow rate increased evidenced the rapid oxidation of Fe to form the Fe hydroxides. In a 40-hour continuous aeration/filtration operation, As and Fe concentrations in groundwater were reduced by 79.5% and 64.88% within 40 hrs, respectively. The ease of filter replacement and cost-effectiveness in operation can be the major attractions and innovations for future field practices.

Food waste and soybean curd residue composting by black soldier fly.

This study attempted to manage the food waste and soybean curd residue generated in Taiwan's National Ilan University by black soldier fly-aided co-composting. The food waste and soybean curd residue were co-composted with rice husk as a bulking agent in 4:1 ratio and 0.42 mg BSF/g waste. The higher organic matter degradation of 31.9% was found in Container B (black soldier flies aided food waste and rice husk co-composting) with a rate constant of 0.14 d-1. In Container D (black soldier flies aided soybean curd residue and rice husk co-composting), the organic matter degradation of 29.4% was found with a rate constant of 0.29 d-1. The matured compost of 6.02 kg was obtained from 20 kg of food waste, while 5.83 kg of matured compost was generated from 20 kg of soybean curd residue. The physico-chemical parameters of the final matured compost were in the favorable range of Taiwan's compost standards. The germination index was 188.6% and 194.78% in Containers B and D, respectively. The present study will expand the application of BSF at the institutional level which prove to be a feasible solution for rapid, clean, and efficient composting of post-consumer food wastes.

Autofocusing by phase difference in reflective digital holography.

In digital holography (DH), the quality of the reconstructed images relies on the accuracy of the reconstruction distance. Existing autofocusing approaches primarily determine the reconstruction distance by evaluating the sharpness of the features in reconstructed images under different reconstruction distances. The maximum sharpness corresponds to the optimal reconstruction distance. However, the existing approaches often fail for diffuse samples and specular ones with no features. The main challenges are as follows: (1) The spatial features, including edge, contrast, and sparsity do not vary obviously by varying the reconstruction distance. (2) The spectral features do not vary obviously as well by varying the reconstruction distance. Therefore, we propose an autofocusing approach based on phase difference to tackle the above problems. The proposed approach consists of three steps: (1) introducing a phase difference into the measured sample as an artificial feature; (2) recording two holograms before and after the phase change and obtaining the phase difference by reconstruction; and (3) taking the phase difference image as the feature and determining the optimal reconstruction distance by using image sharpness evaluation algorithms. According to simulation and practical experiments, the proposed approach has successfully solved the autofocusing problem of the specular samples with no features and diffuse samples.

Environmental benefit assessment of steel slag utilization and carbonation: A systematic review.

The rapid increase in steel slag generation globally highlights the urgent need to manage the disposal or utilization processes. In addition to conventional landfill disposal, researchers have successfully reused steel slag in the construction, chemical, and agricultural fields. With the large portions of alkaline silicate mineral content, steel slag can also be used as a suitable material for carbon capture to mitigate global warming. This article comprehensively reviews the environmental performance of steel slag utilization, especially emphasizing quantitative evaluation using life cycle assessment. This paper first illustrates the production processes, properties, and applications of steel slag, and then summarizes the key findings of the environmental benefits for steel slag utilization using life cycle assessment from the reviewed literature. This paper also identifies the limitations of quantifying the environmental benefits using life cycle assessment. The results indicate steel slag is largely utilized in pavement concrete and/or block as a substitution for natural aggregates. The associated environmental benefits are mostly attributed to the avoidance of the large amount of cement utilized. The environmental benefits for the substitution of traditional energy-intensive material and carbonation treatment are further discussed in detail. Due to the presence of heavy metals, the potential risks to human and ecological health caused by the manufacturing process and usage stage are examined. Finally, the current challenges and global social implications for steel slag valorization are summarized.

Anaerobic co-digestion of agricultural wastes toward circular bioeconomy.

A huge amount of agricultural wastes and waste activated-sludge are being generated every year around the world. Anaerobic co-digestion (AcD) has been considered as an alternative for the utilization of organic matters from such organic wastes by producing bioenergy and biochemicals to realize a circular bioeconomy. Despite recent advancement in AcD processes, the effect of feedstock compositions and operating conditions on the biomethane production processe has not been critically explored. In this paper, we have reviewed the effects of feedstock (organic wastes) characteristics, including particle size, carbon-to-nitrogen ratio, and pretreatment options, on the performance of an anaerobic digestion process. In addition, we provided an overview of the effect of key control parameters, including retention time, temperature, pH of digestate, volatile fatty acids content, total solids content, and organic loading rate. Lastly, based on the findings from the literature, we have presented several perspectives and prospects on priority research to promote AcD to a steppingstone for a circular bioeconomy.

Contribution of sewage to occurrence of phosphodiesterase-5 inhibitors in natural water.

Phosphodiesterase-5 inhibitors (PDE-5i, such as Sildenafil, Tadalafil and Vardenafil, mainly prescribed to treat erectile dysfunction) and their generic drug equivalents have been widely marketed and consumed in Korea. From the concentrations detected in wastewater, we could deduce that relatively large amounts of PDE-5i were consumed without a legal prescription. Thus, PDE-5i's presence in the environment via sewage is unavoidable, and their environmental fate within a sewage treatment plant (STP) should be evaluated. In this study, we investigated the occurrence of three PDE-5i analogs in the influent and effluent of two STPs and the receiving water bodies. The PDE-5i concentration in total reached 62 ± 12 (STP#1) and 88 ± 37 ng L-1 (STP#2) in the sewage influent; about 70% of it was Sildenafil in both STPs. However, they were hardly removed by the STPs as the removal efficiency of the STPs was less than 10% ± 5%. Therefore, the pharmaceuticals were detected in the receiving water (lower than 7 ng L-1as a total amount) and the concentration slightly increased downstream of the STPs. A simple mass balance model applied for the compounds in the STP effluent and receiving water bodies also confirmed that the discharged PDE-5i were quite persistent. Lastly, we identified temporal and regional patterns in the consumption of the drugs from daily variations of PDE-5i in the influent to these two STPs. For instance, the levels of PDE-5i in the sewage significantly increased on weekends (from Friday to Saturday), and especially in the area where adult-entertainment businesses are common. We estimated that the amount of PDE-5i consumption in this area was 31% higher than that in the area with fewer nightlife spots. Considering that they are pharmaceutically active and resistant to treatment processes within an STP, it is advised that a regular monitoring and management program for PDE-5i should be developed to prevent the discharge of the pharmaceuticals into the water environment.

Non-conventional water reuse in agriculture: A circular water economy.

Due to the growing and diverse demands on water supply, exploitation of non-conventional sources of water has received much attention. Since water consumption for irrigation is the major contributor to total water withdrawal, the utilization of non-conventional sources of water for the purpose of irrigation is critical to assuring the sustainability of water resources. Although numerous studies have been conducted to evaluate and manage non-conventional water sources, little research has reviewed the suitability of available water technologies for improving water quality, so that water reclaimed from non-conventional supplies could be an alternative water resource for irrigation. This article provides a systematic overview of all aspects of regulation, technology and management to enable the innovative technology, thereby promoting and facilitating the reuse of non-conventional water. The study first reviews the requirements for water quantity and quality (i.e., physical, chemical, and biological parameters) for agricultural irrigation. Five candidate sources of non-conventional water were evaluated in terms of quantity and quality, namely rainfall/stormwater runoff, industrial cooling water, hydraulic fracturing wastewater, process wastewater, and domestic sewage. Water quality issues, such as suspended solids, biochemical/chemical oxygen demand, total dissolved solids, total nitrogen, bacteria, and emerging contaminates, were assessed. Available technologies for improving the quality of non-conventional water were comprehensively investigated. The potential risks to plants, human health, and the environment posed by non-conventional water reuse for irrigation are also discussed. Lastly, three priority research directions, including efficient collection of non-conventional water, design of fit-for-purpose treatment, and deployment of energy-efficient processes, were proposed to provide guidance on the potential for future research.

Systematic approach to source-sink apportionment of copper in paddy fields: Experimental observation, dynamic modeling and prevention strategy.

The accumulation of heavy metals in paddy rice severely impacts the health of consumers and plants. In this study, a systematic approach to source-sink apportionment of copper in paddy fields was developed by considering all bioenvironmental interfaces. Experimental data from two experimental fields (namely Field A and Field B) in the first harvest period was collected. Then, mass-balance-based models with dynamic critical loads were established to evaluate the year of excess for copper. The results indicated that irrigation water contributed the highest portion (96.2-98.8%) of total copper inputs. Under the business-as-usual scenario, the soil copper concentration of Field A and Field B might exceed the Taiwanese national standard within 66 and 24 years, respectively. In addition, alternate wet-dry irrigation was found to be one of the total solutions to reducing copper accumulation in soils by 17-48%. It could also provide a significant reduction of water usage in paddy fields by ~25%, thereby increasing the resilience to extreme climate change events. Lastly, based on the field observations, three improvement strategies on sustaining soil quality towards better agricultural environment were proposed. The connection of copper accumulation in soils with dietary and ecological risks was also briefly illustrated.