Can vacuum-formed retainers maintain arch dimensions and alignment compared to Hawley and fixed bonded retainers after treatment with fixed appliances? A systematic review and meta-analysis.

BACKGROUND: Different types of retention appliances have been proposed over the years, but their effectiveness in maintaining arch dimensions and alignment after orthodontic treatment is still unclear. AIM: To assess the efficacy of vacuum-formed retainers (VFRs) in preserving arch widths, arch length, and anterior alignment in maxillary and mandibular arches, compared to removable Hawley retainers (HRs) or fixed bonded retainers (FBRs). Search methods: unrestricted literature search of five major databases up to March 2024. SELECTION CRITERIA: randomized/non-randomized clinical studies comparing VFRs to removable HRs or FBRs. DATA COLLECTION AND ANALYSIS: after duplicate study selection, data extraction, and risk of bias assessment, random effects meta-analyses of standardized mean differences and their 95% confidence intervals were performed, followed by meta-regressions, sensitivity analyses, and assessment of the quality of evidence with GRADE. RESULTS: Twenty-two prospective studies (4 non-randomized and 18 randomized controlled trials) involving 1797 patients (mean age 17.01 years, 38.3% males) were included. No significant differences were found in the intercanine width, intermolar width, and arch length between VFRs and HRs, in both arches (P > 0.05). However, VFRs were statistically more effective than HRs in terms of Little's irregularity scores (LII) in the maxilla (eight studies; SMD = -0.42; 95% CI: -1.03 to -0.09; P = 0.02; I2 = 73.4%) but not in the mandible (P = 0.12). No significant differences were reported for all considered outcomes between VFRs and FBRs in in both arches (P > 0.05), except for lower LII, where VFRs were significantly less efficient (eight studies; SMD = 1.49; 95% CI = 0.26-2.7; P = 0.02; I2 = 93%). Follow-up times, risk of bias, and wire type (of FBRs) did not show statistically significant effects on outcome variables. Sensitivity analyses showed robustness of the findings for including non-randomized and postretention studies. The certainty in these estimates was from moderate to low due to the risk of bias and inconsistency. CONCLUSIONS: Low to moderate quality evidence indicates that VFRs are as effective as HRs in maintaining arch widths, length, and alignment. Low-quality evidence found similar efficacy between VFRs and FBRs, with FBRs being statistically more effective at maintaining lower arch alignment, but the difference was not clinically significant. REGISTRATION: PROSPERO registration (CRD42024518433).

Most meta-analyses in oral health do not have conclusive and robust results.

OBJECTIVES: In meta-analyses with few studies, between-study heterogeneity is poorly estimated. The Hartung and Knapp (HK) correction and the prediction intervals can account for the uncertainty in estimating heterogeneity and the range of effect sizes we may encounter in future trials, respectively. The aim of this study was to assess the reported use of the HK correction in oral health meta-analyses and to compare the published reported results and interpretation i) to those calculated using eight heterogeneity estimators and the HK adjustment ii) and to the prediction intervals (PIs). METHODS: We sourced systematic reviews (SRs) published between 2021 and 2023 in eighteen leading specialty and general dental journals. We extracted study characteristics at the SR and meta-analysis level and re-analyzed the selected meta-analyses via the random-effects model and eight heterogeneity estimators, with and without the HK correction. For each meta-analysis, we re-calculated the overall estimate, the P-value, the 95% confidence interval (CI) and the PI. RESULTS: We analysed 292 meta-analyses. The median number of primary studies included in meta-analysis was 8 (interquartile range [IQR]= [5.75-15] range: 3-121). Only 3/292 meta-analyses used the HK adjustment and 12/292 reported PIs. The percentage of statistically significant results that became non-significant varied across the heterogeneity estimators (7.45%- 16.59%). Based on the PIs, more than 60% of meta-analyses with statistically significant results are likely to change in the future and more than 40% of the PIs included the opposite pooled effect. CONCLUSIONS: The precision and statistical significance of the pooled estimates from meta-analyses with at least three studies is sensitive to the HK correction, the heterogeneity variance estimator, and the PIs. CLINICAL SIGNIFICANCE: Uncertainty in meta-analyses estimates should be considered especially when a small number of trials is available or vary notably in their precision. Misinterpretation of the summary results can lead to ineffective interventions being applied in clinical practice.

Unveiling the Role of Metal Ion Concentration versus Immune Sensitization in Orthodontic Patients-A Long-Term Prospective Evaluation.

Background: This longitudinal prospective study aimed to assess orthodontic patients' immune system response to metal ion release in saliva. Methods: Thirty adult patients (18-35 years) were equally divided into three groups: groups at the end (G1) and beginning (G2) of multibracket appliances (MBA) treatment and a non-treated control group (G3). Participants were evaluated at four timepoints within 21 days, with saliva samples being analyzed for metal ion concentrations and blood for the lymphocyte transformation test (LTT). Results: There were no significant differences between groups or timepoints for saliva. LTT analyses revealed hypersensitivity in one-third of all patients and 50% of G2 for nickel, with three developing sensitizations after MBA insertion. All nickel-sensitized patients exhibited varying elevated saliva nickel concentrations. The most nickel-sensitized patients had low ion saliva loads. In borderline nickel-sensitization cases, saliva ion concentrations were up to 20 times higher than the reference. Hypersensitivity to palladium, gold, and mercury was also observed. Conclusions: These findings indicate that increased MBA ion release was not inherently linked to the immune response (Type-IV sensitization), as reactions occurred even with ion levels below thresholds. This underlines the need for a comprehensive evaluation of the immune response to metal ion release in orthodontic patients.

The effect of occlusal loading on secondary tooth eruption: An experimental study using a rat model.

This study aimed to assess the impact of occlusal loading on secondary tooth eruption and to determine the extent to which altering the occlusal loading influences the magnitude of secondary eruption through an experimental rat model. The present sample consisted of 48 male Wistar rats. At the onset of the experiment, 24 rats were 4 weeks old (young rats) and 24 rats were 26 weeks old (adult). Within each age group, the rats were further divided into two equal subgroups (12 rats each), receiving either a soft- or hard-food diet for the 3-month duration of the experiment. The primary outcome was the tooth position changes relative to stable references in the coronal plane by evaluating the distance between the mandibular first molars and the inferior alveolar canal. Microcomputed tomography scans were taken from all rats at three standardized intervals over the 3-month study period. Descriptive statistics were calculated by age and diet over time, and the evolution of the outcomes were plotted by age and diet over time. Longitudinal data analysis via generalized estimating equations was performed to examine the effect of age, diet and time on the primary outcomes. Secondary tooth eruption was observed in all age groups (young and adult) regardless of diet consistency (soft or hard food). In young rats, the secondary eruption was greater in the animals fed a soft diet than those fed a hard diet. In adult rats, minimal difference in secondary tooth eruption were found between different diet consistencies. Occlusal loading influences secondary tooth eruption in teeth with an established occlusal contact. The quantity of eruption in growing rats is higher when occlusal loading is less, providing a certain amount of secondary tooth eruption occurs. This difference, however, is not evident in adult rats, at least during the given 3-month time frame.

Still to ARRIVE at adequate reporting of orthodontic studies involving animal models.

BACKGROUND: The ARRIVE 2.0 guidelines were introduced to improve the reporting of animal studies. The aim of this study was to assess the reporting adherence of orthodontic speciality animal studies in relation to ARRIVE 2.0 guidelines. Associations between the reporting and study characteristics were explored. MATERIALS AND METHOD: An electronic database search was undertaken using Medline via PubMed (www.pubmed.ncbi.nlm.nih.gov) to identify studies meeting the eligibility criteria published between 1 January 2018 and 31 December 2023. Data extraction was performed in duplicate and independently. Descriptive statistics and frequency distributions for the responses to each checklist item were calculated. Mean values for adequate reporting per ARRIVE item were calculated. A sum score was calculated by adding the responses (0 = not reported, 1 = inadequate reporting, 2 = adequate reporting) per item and sub-questions. On an exploratory basis, univariable linear regression between summary score and study characteristics (year of publication, continent of authorship, type of centre, and number of authors) was performed. RESULTS: Three hundred and eighty-four studies were analysed. Variability in the adequate reporting of the ARRIVE 2.0 guideline items was evident. In particular, in 32% of studies, there was a lack of reporting of the priori sample size calculation. Overall, the mean reporting score for the sample was 57.9 (SD 6.7 and range 34-74). There were no associations between score and study characteristics except for a weak association for year of publication with a small improvement over time (each additional year). CONCLUSIONS: The reporting of animal studies relevant to the speciality of orthodontics is sub-optimal in relation to the ARRIVE 2.0 guidelines. There was a tendency for the non-reporting of items pertaining to study sample size, eligibility, methods to reduce bias and interpretation/scientific implications. Greater awareness and reporting adherence to the ARRIVE 2.0 guidelines are required to reduce research waste involving animal models.

Oversized Surgical Preparation of the Implant Site: Systematic Review and Meta-analysis of Preclinical Studies.

PURPOSE: To answer the following focus question: In preclinical in vivo experimental models, do oral implants placed in overdimensioned (OD) sites present greater biomechanical properties and histomorphometric parameters of osseointegration compared to implants placed in standard or undersized implant sockets? MATERIALS AND METHODS: Online databases were searched for controlled animal studies reporting on OD sites up to February 2023. The relative implant- final drill discrepancy (IDD) was used to categorize the control and test groups according to surgical drilling protocol: (1) control: undersized (IDD > 0.5 mm) or standard (IDD = 0.2 to 0.5 mm); and (2) test OD: stress-free oversized (IDD = 0.0 to -0.1 mm); test GAP: friction-free oversized (IDD ≤ -0.1 mm). Random-effects meta-analyses were performed for the outcomes of insertion and removal torque values (ITV and RTV, respectively), bone-to-implant contact (%BIC), and bone density (%BD) for short- (0 to 2 weeks), intermediate- (3 to 4 weeks), and long-term (≥ 5 weeks) healing periods. RESULTS: Of the 527 records identified, 13 studies met the eligibility criteria. Histologically, the OD and GAP groups prevented ischemic necrosis and extensive bone resorption at the bone-implant interface in both the marginal cortical layer and the trabeculae. Faster and increased rates of bone formation, characterized by primary osteons and highly vascularized tissue, took place in OD sites between 1 and 5 weeks of healing. Meta-analyses indicated statistically significant benefits in favor of (1) control vs OD for short-term healing in extraoral sites, with pooled estimates (weighted mean difference) of ITV = 25.35 Ncm, %BIC = 2.10%, and %BD = 26.19%; (2) control vs OD for long-term healing in intraoral sites, with %BD = 11.69%; (3) control vs GAP for intermediate-term healing in extraoral sites, with %BD = 3.03%; and (4) control vs GAP for long-term healing in extraoral sites, with RTV = 5.57 Ncm. CONCLUSIONS: Oversized surgical preparation of the implant site does not seem to provide any additional benefit compared to standard or undersized sites regarding quantitative parameters of osseointegration. However, it does minimize marginal bone resorption and yields better-quality bone healing, despite the comparable results among different experimental animal models in the late postoperative period.

Panel stacking is a threat to consensus statement validity.

Consensus statements can be very influential in medicine and public health. Some of these statements use systematic evidence synthesis but others fail on this front. Many consensus statements use panels of experts to deduce perceived consensus through Delphi processes. We argue that stacking of panel members toward one particular position or narrative is a major threat, especially in absence of systematic evidence review. Stacking may involve financial conflicts of interest, but nonfinancial conflicts of strong advocacy can also cause major bias. Given their emerging importance, we describe here how such consensus statements may be misleading, by analyzing in depth a recent high-impact Delphi consensus statement on COVID-19 recommendations as a case example. We demonstrate that many of the selected panel members and at least 35% of the core panel members had advocated toward COVID-19 elimination (Zero-COVID) during the pandemic and were leading members of aggressive advocacy groups. These advocacy conflicts were not declared in the Delphi consensus publication, with rare exceptions. Therefore, we propose that consensus statements should always require rigorous evidence synthesis and maximal transparency on potential biases toward advocacy or lobbyist groups to be valid. While advocacy can have many important functions, its biased impact on consensus panels should be carefully avoided.

Effect of aligners on patients' oral health-related quality of life and anxiety: a prospective pilot study.

BACKGROUND: This prospective study explored the impact of aligners on the oral health-related quality of life and anxiety of patients during the first month of orthodontic treatment and the first month of the retention phase. METHODS: A total of 23 male and female patients (median age 25 y) treated with clear aligners were included. The OHRQoL questionnaire was used at certain time points during treatment (T1: placement of the first aligner; T2: after one day of use; T3: after seven days; T4: after one month; and T5: after one month in the retention phase). The State-Trait Anxiety Inventory (STAI) was also self-administered to assess state and trait anxiety (Y1 and Y2 subscales, respectively) at the T1, T4 and T5 time points. A population average generalized estimating equations logistic regression model was fit to assess the effect of time on the responses, and the Wald test was used to examine the overall effect of time. RESULTS: Overall time was a significant predictor for most of the questions. However, time was marginally significant for the OHRQoL questions evaluating oral symptoms such as bad taste/smell, sores, and food accumulation. Tooth discolouration did not differ between time points. The general activity disturbance was significantly lower in the retention phase. Higher depression and anxiety scores were reported at the initial appointment and decreased thereafter. CONCLUSIONS: CAT has a negative impact on quality of life and psychological status during the initial days of treatment. These impairments ameliorate at later treatment stages.

Impacted maxillary canine: Assessment of prevalence, severity and location of root resorption on maxillary incisors: A retrospective CBCT study.

BACKGROUND: The maxillary permanent canine is one of the most frequently impacted teeth, which often requires multidisciplinary management. A common complication of canine impaction is root resorption of the adjacent dentition. The aim of this retrospective study was to report the prevalence of root resorption of maxillary incisors adjacent to impacted maxillary canines from small volume CBCT images by trained clinicians. A secondary objective was to report the location and severity of root resorption. MATERIAL AND METHODS: CBCT images of patients with impacted maxillary canines (unilateral and bilateral) who attended a joint orthodontic/surgical multidisciplinary clinic were screened. Descriptive statistics were used to investigate associations of patient characteristics and presence of root resorption. Generalized estimating equations (GEE) logistic regression model were used to identify predictors of root resorption. RESULTS: In all, 148 impacted maxillary canines (122 patients) were analysed. The majority of patients were under 18 years of age (71.6%) with impacted canines present in more females (68.2%) than males (31.8%). Maxillary lateral incisors showed the highest prevalence of root resorption (38.5%). The apical region was the most common location of resorption for lateral incisors (20.9%) with a variable degree of severity evident: slight (10.1%), moderate (15.6%), and severe (12.8%). Although no significant predictors of root resorption were identified, a weak association was evident for age and root development. CONCLUSIONS: In this cohort of patients, the roots of maxillary lateral incisors are most likely to suffer from root resorption in the presence of an impacted maxillary canine. Clinicians should consider the extent, location and severity of resorption of adjacent teeth when planning treatment decisions and mechanics in cases of impacted maxillary canines.

High certainty evidence is stable and trustworthy, whereas evidence of moderate or lower certainty may be equally prone to being unstable.

OBJECTIVES: To assess to what extent the overall quality of evidence indicates changes to observe intervention effect estimates when new data become available. METHODS: We conducted a meta-epidemiological study. We obtained evidence from meta-analyses of randomized trials of Cochrane reviews addressing the same health-care question that was updated with inclusion of additional data between January 2016 and May 2021. We extracted the reported effect estimates with 95% confidence intervals (CIs) from meta-analyses and corresponding GRADE (Grading of Recommendations Assessment, Development, and Evaluation) assessments of any intervention comparison for the primary outcome in the first and the last updated review version. We considered the reported overall quality (certainty) of evidence (CoE) and specific evidence limitations (no, serious or very serious for risk of bias, imprecision, inconsistency, and/or indirectness). We assessed the change in pooled effect estimates between the original and updated evidence using the ratio of odds ratio (ROR), absolute ratio of odds ratio (aROR), ratio of standard errors (RoSE), direction of effects, and level of statistical significance. RESULTS: High CoE without limitations characterized 19.3% (n = 29) out of 150 included original Cochrane reviews. The update with additional data did not systematically change the effect estimates (mean ROR 1.00; 95% CI 0.99-1.02), which deviated 1.06-fold from the older estimates (median aROR; interquartile range [IQR]: 1.01-1.15), gained precision (median RoSE 0.87; IQR 0.76-1.00), and maintained the same direction with the same level of statistical significance in 93% (27 of 29) of cases. Lower CoE with limitations characterized 121 original reviews and graded as moderate CoE in 30.0% (45 of 150), low CoE in 32.0% (48 of 150), and very low CoE in 18.7% (28 of 150) reviews. Their update had larger absolute deviations (median aROR 1.12 to 1.33) and larger gains in precision (median RoSE 0.78-0.86) without clear and consistent differences between these categories of CoE. Changes in effect direction or statistical significance were also more common in the lower quality evidence, again with a similar extent across categories (without change in 75.6%, 64.6%, and 75.0% for moderate, low, very low CoE). As limitations increased, effect estimates deviated more (aROR 1.05 with zero, 1.11 with one, 1.25 with two, 1.24 with three limitations) and changes in direction or significance became more frequent (93.2% stable with no limitations, 74.5% with one, 68.2% with two, and 61.5% with three limitations). CONCLUSION: High-quality evidence without methodological deficiencies is trustworthy and stable, providing reliable intervention effect estimates when updated with new data. Evidence of moderate and lower quality may be equally prone to being unstable and cannot indicate if available effect estimates are true, exaggerated, or underestimated.

An in vitro comparison of the dimensional stability of four 3D-printed models under various storage conditions.

OBJECTIVES: To investigate the dimensional stability of various 3D-printed models derived from resin and plant-based, biodegradable plastics (PLA) under specific storage conditions for a period of up to 21 weeks. MATERIALS AND METHODS: Four different printing materials, including Draft V2, study model 2, and Ortho model OD01 resins as well as PLA mineral, were evaluated over a 21-week period. Eighty 3D-printed models were divided equally into two groups, with one group stored in darkness and the other exposed to daylight. All models were stored at a constant room temperature (20°C). Measurements were taken at 7-week intervals using the Inspect 3D module in OnyxCeph software (Image Instruments GmbH, Chemnitz, Germany). RESULTS: Dimensional change was noted for all of the models with shrinkage of up to 0.26 mm over the study period. Most contraction occured from baseline to T1, although significant further contraction also arose from T1 to T2 (P < .001) and T1 to T3 (P < .001). More shrinkage was observed when exposed to daylight overall and for each resin type (P < .01). The least shrinkage was noted with Ortho model OD01 resin (0.16 mm, SD = 0.06), and the highest level of shrinkage was observed for Draft V2 resin (0.23 mm, SD = 0.06; P < .001). CONCLUSIONS: Shrinkage of 3D-printed models is pervasive, arising regardless of the material used (PLA or resin) and being independent of the brand or storage conditions. Consequently, immediate utilization of 3D printing for orthodontic appliance purposes may be preferable, with prolonged storage risking the manufacture of inaccurate orthodontic retainers and appliances.

Midpalatal miniscrew insertion: The accuracy of digital planning and surgical placement.

INTRODUCTION: The objective of this study was to investigate the accuracy of palatal miniscrew insertion, evaluating the effect of guide fabrication and surgical placement. METHODS: Guided insertion of bilateral paramedian palatal miniscrews was undertaken using Appliance Designer software (3Shape, Copenhagen, Denmark). A resin surgical guide (P Pro Surgical Guide; Straumann AG, Basel, Switzerland) was used. Superimposition of the miniscrew position relative to the digital design was undertaken using bespoke software (Inspect 3D module, OnyxCeph; Image Instruments GmbH, Chemnitz, Germany) to assess surgical inaccuracy. Miniscrew position relative to the surgical guide was also assessed to isolate the effect of planning inaccuracies. Both horizontal and vertical discrepancies were evaluated at both implant locations. RESULTS: Twenty-seven patients having bilateral palatal insertions were examined. Mean discrepancies were <0.5 mm, both in the horizontal and vertical planes. The mean overall horizontal and vertical discrepancy between the digital design and final miniscrew position on the left side was 0.32 ± 0.15 mm and 0.34 ± 0.17 mm, respectively. The maximum horizontal discrepancy observed was 0.72 mm. No significant differences were observed in relation to the accuracy of mini-implant positioning on the basis of sidedness, either for horizontal (P = 0.29) or vertical (P = 0.86) discrepancy. CONCLUSIONS: High levels of accuracy associated with guided insertion of paramedian palatal implants were recorded with mean discrepancies of less than 0.5 mm both in the horizontal and vertical planes. No difference in accuracy was noted between the left and right sides. Very minor levels of inaccuracy associated both with surgical techniques and surgical guide fabrication were recorded.

Assessment of wear characteristics, longevity and stiffness of Essix-type retainers.

OBJECTIVE: To compare four commercially available Essix-type retainers in terms of longevity, wear characteristics, stiffness and their range of rigidity. MATERIALS AND METHODS: An in vitro study was conducted at Queen Mary University of London. Four groups of thermoplastic materials were included: Duran (PETG), Essix C + (Polypropylene), Vivera and Zendura (Polyurethane). A working typodont was fabricated to evaluate surface wear characteristics using a wear machine with a customized jig. Retainers were measured for tensile test, and water absorption was measured at five different time points up to 6 months after initial immersion in two different physical states and two different solutions. Hydrolytic degradation was also evaluated using FTIR spectroscopy. RESULTS: Essix C + was the most flexible retainer with Vivera the stiffest material. Zendura and Essix C + had the most surface wear (413 µm ± 80 and 652 µm ± 12, respectively) with absorption rates of up to 15 wt% in artificial saliva occurring with Zendura. Only Essix C + displayed signs of degradation following water absorption. CONCLUSIONS: All materials had characteristic levels of flexibility and were susceptible to water absorption. Duran 1.5 mm performed similarly to Vivera in relation to stiffness and wear properties. While Zendura and Vivera have similar chemical structures, they exhibited differences concerning wear resistance and water absorption. Further clinical research evaluating the clinical relevance of these laboratory findings is required. CLINICAL RELEVANCE: Characteristic patterns of wear and rigidity of four commercially available Essix-type retainers were observed. This information should help in the tailoring of retainer material on a case-by-case basis considering treatment-related factors and patient characteristics including parafunctional habits.

Orthodontic retention: Rationale and periodontal implications.

Post-treatment change in the form of true relapse and physiological and maturational effects is common following orthodontics. The unpredictable nature of these manifestations dictates a conservative, near-universal approach to retention. Both fixed and removable forms of retention are popular with the latter constrained by variable levels of adherence particularly in the medium- to long-term. Fixed retention may offer a more predictable means of preservation of orthodontic outcomes; however, this advantage is offset by the requirement for prolonged supervision and the potential for adverse changes including periodontal breakdown. Nevertheless, while examples of severe complications are common, a clear causal relationship between intact, passive retainers and periodontal issues does not appear to exist. Nevertheless, the importance of diligent maintenance and careful supervision during fixed retention, in particular, cannot be disregarded.

Mandibular second molar extraction: A retrospective cohort study of spontaneous occlusal changes in adolescent patients.

OBJECTIVES: Evaluate long-term spontaneous occlusal changes following L7 extraction in adolescent patients. MATERIALS AND METHODS: Study models of 144 participants (63 males, 81 females) retrospectively assessed prior to L7 extraction (9-16 years old; T1) and following L8 eruption (14-25 years old; T2). All received upper fixed appliances. A sub-group (n = 86) received no lower fixed appliances and acted as controls. Occlusal changes were compared between treatment (lower fixed appliance) and control (no lower fixed appliance) groups using PAR index. At T2, L8 occlusal outcome was assessed using ABO grading system. RESULTS: Mean follow-up period 6 (SD 2) years. At T1, lower scores observed in control group for Lower Anterior (P < .001), Midline (P = .033) and Lateral Segments (P = .040) components. At T2, lower scores continued being observed in control group for Midline (P < .001) and Lateral segment (P = .019) components. Higher decrease in Lower Anterior PAR scores observed in treatment group (<.001) with comparable scores between groups at T2 (P = .057). Similar PAR score changes between groups for Lateral Segments, Overjet and Overbite components. At T2, no significant difference observed in Total PAR score reduction between control (83%) and treatment (82%) groups. Good-to-acceptable occlusal outcome of the L8 observed in 81.55% of cases at T2 with no difference between groups. CONCLUSION: In growing patients with mild mandibular crowding, extraction of L7 followed by upper fixed appliance therapy, leads to favourable occlusal changes over a 6-year follow-up period, with or without lower fixed appliance therapy, being an alternative extraction protocol where lower fixed appliance therapy is not recommended.

Repeated local delivery of hyaluronic acid gel as adjunctive treatment of residual pockets in periodontitis patients undergoing supportive periodontal care. A randomized controlled clinical trial.

OBJECTIVES: To assess the effect of hyaluronic acid (HyA) application as adjunct to re-instrumentation of residual pockets in patients undergoing regular supportive periodontal care (SPC). METHODS: Chronic periodontitis patients (stage III and IV, grade B and C) with 4 interproximal residual pockets were randomly assigned to the test (HyA gel) or control (saline) group. After subgingival instrumentation, test or control substance was applied subgingivally, then daily supragingivally for 3 months, and if required a second time after subgingival re-instrumentation after 3 months. Clinical and patient reported outcome parameters were recorded every 3 months for 12 months. Pocket closure [probing pocket depth (PPD) ≤ 4mm with absence of bleeding on probing (BoP) at PPD = 4mm] was the main outcome parameter. RESULTS: Fifty-six patients (221 experimental sites) were analysed. Pocket closure was achieved in 56.8 and 46.6% of the experimental sites in the test and control group, respectively (p > 0.05), while median PPD and PPD distribution (< 5mm/5mm/ > 5mm) differed significantly between groups in favour of the test group, at 12 months. Further, significantly fewer sites in the HyA group required re-instrumentation at 3 months, and sites in the HyA group showed a tendency for lower odds to remain diseased compared to the control group (OR 0.48, 95%CI 0.22-1.06). The odds for a site to remain diseased after 12 months increased significantly in the presence of plaque (OR 7.94, 95%CI 4.12-15.28), but in general, decreased significantly over time (OR 0.48, 95%CI 0.28-0.81). CONCLUSION: Re-instrumentation of residual pockets in SPC patients, per se, leads to a significant increase in pocket closure over time; this was impeded by poor plaque control. Repeated local application of HyA results in fewer sites requiring re-instrumentation and might slightly improve the rate of pocket closure. (clinicaltrials.gov registration nr. NCT04792541). CLINICAL RELEVANCE: HyA gel is easy to apply, well accepted by patients, and may have some positive effect in terms of fewer sites requiring re-instrumentation at 3 months and higher pocket closure rate at 12 months.

The effect of vertical skeletal proportions, skeletal maturation, and age on midpalatal suture maturation: a CBCT-based study.

BACKGROUND: Midpalatal suture (MPS) maturation may be influenced by a range of parameters including age, gender, and vertical skeletal pattern. We therefore aimed to evaluate the effect of Frankfurt-mandibular angle (FMA), skeletal maturation, and age on the timing of MPS maturation. METHODS: In this cross-sectional study, cone-beam computed tomography (CBCT) and lateral cephalograms were used to assess the MPS and cervical vertebral maturation (CVM) stage. A proportional odds logistic regression model was used to assess associations between age adjusted for gender and MPS maturation, and a regression analysis was performed to analyze the effect of vertical pattern on these associations. RESULTS: A total of 201 patients (84 male and 117 female) with a mean age of 13.48 (SD 1.94) were included. With increasing age, the odds of belonging to a higher maturation stage increased (OR: 2.14; 95% CI 1.789; 2.567; P < 0.001); however, no association between FMA and MPS maturation was observed (OR: 1.01; 95% CI 0.964; 1.051; P = 0.76). A strong correlation between MPS maturation and CVM stage was not reported. Males had a higher probability of belonging to a lower MPS maturation stage (OR: 0.24; 95% CI 0.136; 0.415; P < 0.001). CONCLUSIONS: Based on this cross-sectional analysis, midpalatal sutural maturation classification is associated with chronological age and occurs later in males. Neither CVM staging nor variation in vertical skeletal proportions were useful predictors of midpalatal maturation stage.

Can ChatGPT identify predatory biomedical and dental journals? A cross-sectional content analysis.

OBJECTIVES: To assess whether ChatGPT can help to identify predatory biomedical and dental journals, analyze the content of its responses and compare the frequency of positive and negative indicators provided by ChatGPT concerning predatory and legitimate journals. METHODS: Four-hundred predatory and legitimate biomedical and dental journals were selected from four sources: Beall's list, unsolicited emails, the Web of Science (WOS) journal list and the Directory of Open Access Journals (DOAJ). ChatGPT was asked to determine journal legitimacy. Journals were classified into legitimate or predatory. Pearson's Chi-squared test and logistic regression were conducted. Two machine learning algorithms determined the most influential criteria on the correct classification of journals. RESULTS: The data were categorized under 10 criteria with the most frequently coded criteria being the transparency of processes and policies. ChatGPT correctly classified predatory and legitimate journals in 92.5 % and 71 % of the sample, respectively. The accuracy of ChatGPT responses was 0.82. ChatGPT also demonstrated a high level of sensitivity (0.93). Additionally, the model exhibited a specificity of 0.71, accurately identifying true negatives. A highly significant association between ChatGPT verdicts and the classification based on known sources was observed (P <0.001). ChatGPT was 30.2 times more likely to correctly classify a predatory journal (95 % confidence interval: 16.9-57.43, p-value: <0.001). CONCLUSIONS: ChatGPT can accurately distinguish predatory and legitimate journals with a high level of accuracy. While some false positive (29 %) and false negative (7.5 %) results were observed, it may be reasonable to harness ChatGPT to assist with the identification of predatory journals. CLINICAL SIGNIFICANCE STATEMENT: ChatGPT may effectively distinguish between predatory and legitimate journals, with accuracy rates of 92.5 % and 71 %, respectively. The potential utility of large-scale language models in exposing predatory publications is worthy of further consideration.

Perceived esthetics and value of clear aligner therapy systems: A survey among dental school instructors and undergraduate students

ABSTRACT Objective: To investigate the attractiveness, acceptability, visibility and willingness-to-pay for clear aligner therapy (CAT) systems in first-year and final-year dental students and instructors. Methods: A questionnaire designed to collect information regarding esthetic preferences and intentions related to seven CAT systems was handed out to 120 undergraduate students and instructors at the Academic Centre for Dentistry Amsterdam (ACTA). Proportional odds models and population average generalized estimating equation models were used to examine potential association between participant characteristics, esthetic perceptions and CAT systems. Results: Overall, the examined CAT systems received favorable esthetic ratings. Expertise status was significantly associated with willingness-to-pay additionally for CAT, compared to fixed orthodontic appliances. There was no association between sex, previous orthodontic treatment history, satisfaction with own dental appearance and potential interest in treatment and aligner visibility and willingness-to-pay. CAT system was significantly associated with the perceived aligner visibility, acceptability and attractiveness by students and instructors. Conclusions: CAT systems were considered to a great extent attractive and acceptable for future treatment by dental school instructors and students. Willingness-to-pay for CAT systems was significantly associated with expertise status, with instructors appearing more reluctant to pay for CAT.

RESUMO Objetivo: Comparar diferentes sistemas de tratamento com alinhadores transparentes (CAT), quanto à atratividade, aceitabilidade, visibilidade e disposição a pagar, por parte de alunos (primeiro e último anos) e instrutores de Odontologia. Métodos: Um questionário elaborado para coletar informações sobre preferências e intenções estéticas, em relação a sete sistemas CAT, foi distribuído para 120 alunos de graduação e instrutores do Academic Centre for Dentistry Amsterdam (ACTA). Modelos de riscos proporcionais e modelos de equação de estimação generalizada para a média da população foram usados para examinar a possível associação entre as características dos participantes, percepções estéticas e os sistemas CAT. Resultados: No geral, os sistemas CAT examinados receberam avaliações estéticas favoráveis. O nível de experiência foi significativamente associado com a disposição em pagar mais por sistemas CAT do que por aparelhos ortodônticos fixos. Não houve associação entre sexo, histórico de tratamento ortodôntico anterior, satisfação com a própria aparência dentária, potencial interesse em tratamento, visibilidade do alinhador e disposição em pagar mais. Os sistemas CAT foram significativamente associados à visibilidade percebida, aceitabilidade e atratividade dos alinhadores por alunos e instrutores. Conclusões: Os sistemas CAT foram considerados, em grande parte, atraentes e aceitáveis para tratamentos futuros pelos instrutores e alunos do curso de Odontologia. A disposição em pagar mais pelos sistemas CAT foi significativamente associada ao nível de especialização, com os instrutores parecendo mais relutantes em pagar mais pelo CAT.

Are cloth masks a substitute to medical masks in reducing transmission and contamination? A systematic review

Abstract: During the COVID-19 pandemic the use of cloth masks has increased dramatically due to the shortage of medical masks. However, the efficiency of this material is controversial. We aimed to investigate the efficiency of cloth masks in reducing transmission and contamination by droplets and aerosols for the general population and healthcare workers. Electronic databases were searched without year or language restrictions. Clinical and laboratorial studies were included. The risk of bias (RoB) was assessed using an adapted quality checklist for laboratory-based studies. ROBINS-I tool and Cochrane RoB 2.0 were used to evaluate non-randomized (n-RCT) and randomized clinical trials (RCT), respectively. The quality of the evidence was assessed through GRADE tool. From the eleven studies selected, eight were laboratory-based studies, one non-randomized and one RCT supported by laboratory data. Between the evaluated fabrics only three presented a filtration efficiency > 90%. Hybrid of cotton/chiffon (95%CI 95.2 to 98.8), hybrid of cotton/silk (95%CI 92.2 to 95.8) and cotton quilt (95%CI 94.2 to 97.8). However, cloth masks are not recommended for healthcare workers. A meta-analysis was not feasible due to a high methodological heterogeneity. The overall quality of evidence ranged from very low to moderate. Despite the lower efficiency compared to medical masks, laboratorial results may underestimate the efficiency of cloth masks in real life. Cloth mask efficiency is higher when made of hybrid fabrics (cotton/chiffon, cotton/silk) and cotton quilt, mainly with multiple layers.