Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Más filtros












Base de datos
Intervalo de año de publicación
1.
Nanoscale Adv ; 3(16): 4739-4749, 2021 Aug 10.
Artículo en Inglés | MEDLINE | ID: mdl-36134305

RESUMEN

The incorporation of vacancies in a system is considered a proficient method of defect engineering in general catalytic modulation. Among two-dimensional materials, the deficiency of surface active sites and a high band gap restrict the catalytic activity of hexagonal boron nitride (hBN) material towards the oxygen reduction reaction (ORR), which hinders its applicability in fuel cells. A bane to boon strategy has been introduced here by coupling two sluggish ORR materials (hBN & MoS2) by a probe-sonication method to form a heterostructure (termed HBPS) which fosters four electron pathways to assist the reduction of oxygen. Theoretical and experimental studies suggest the kinetically and thermodynamically favorable formation of boron vacancies (B-vacancies) in the presence of MoS2, which act as active sites for oxygen adsorption in HBPS. B-vacancy induced uneven charge distribution together with band gap depression promote rapid electron transfer from the valance band to the conduction band which prevails over the kinetic limitation of pure hBN nanosheets towards ORR kinetics. The formed B-vacancy induced HBPS further exhibits a low Tafel slope (66 mV dec-1), and a high onset potential (0.80 V vs. RHE) with an unaltered electrochemically active surface area (ESCA) after long-term cycling. Thus, vacancy engineering in hBN has proved to be an efficient approach to unlock the potential of catalytic performance enhancement.

2.
Dalton Trans ; 49(23): 7872-7890, 2020 Jun 21.
Artículo en Inglés | MEDLINE | ID: mdl-32469013

RESUMEN

Magnetite (Fe3O4), a representative relaxor multiferroic material, possesses fundamentally appealing multifaceted size-dependent properties. Herein, to evaluate a prototype spinel transition metal oxide (STMO), monodispersed and highly water-dispersible spherical magnetite nanoparticles (MNPs) with an enormous size range (3.7-242.8 nm) were synthesized via a facile microwave-assisted and polyol-mediated solvothermal approach at a controlled temperature and pressure using unique crystallite growth inhibitors. The excellent long-term colloidal stability of the MNPs in a polar environment and increase in their zeta potential confirmed the coordinative effect of the carboxylate groups derived from the covalent surface functionalization, which was also validated by FTIR spectroscopy, TGA and XPS analysis. The optical bandgap (Eg) between the crystal field split-off bands, which was calculated using the absorption spectra, increased gradually with a decrease in size of the MNPs within a broad UV-Vis range (1.59-4.92 eV). The red-shifting of the asymmetric Raman peaks with a smaller size and short-range electron-phonon coupling could be explained by the modified phonon confinement model (MPCM), whereas ferrimagnetic nature rejigged by superparamagnetism was verified from Mössbauer analysis. These stoichiometric, non-toxic, polar and magnetic nanocrystals are not only ideal for biomedical applications, but also suitable as electroactive porous host networks. Finally, the size-modulated MNPs were incorporated in poly(vinylidene fluoride) [PVDF]-based polytype nanogenerators as an electret filler to demonstrate their piezoelectric performance (VOC∼115.95 V and ISC∼1.04 µA), exhibiting substantial electromagnetic interference shielding.

3.
Microsc Microanal ; 25(6): 1466-1470, 2019 12.
Artículo en Inglés | MEDLINE | ID: mdl-31556362

RESUMEN

In this work, strongly blue emitting Ce3+-activated BaAl2O4 nanophosphors were successfully synthesized by a sol-gel technique. The crystal structure, morphology, and microstructure of the nanophosphors have been studied by X-ray powder diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy. The photoluminescence spectra show the impact of concentration variation of Ce3+ on the photoluminescence emission of the phosphor. These nanophosphors display intense blue emission peaking at 422 nm generated by the Ce3+ 5d → 4f transition under 350 nm excitation. Our results reveal that this nanophosphor has the capability to take part in the emergent domain of solid-state lighting and field-emission display devices.

4.
Microsc Microanal ; 25(6): 1422-1430, 2019 12.
Artículo en Inglés | MEDLINE | ID: mdl-31025617

RESUMEN

In recent years, nanoscale phosphors have become vital in optoelectronic applications and to understand the improved performance of nanophosphors over bulk material, detailed investigation is essential. Herein, trivalent europium-activated Y4Al2O9 phosphors were developed by solid-state reaction and solvothermal reaction methods and their performance as a function of their dimension was studied for various applications. Under 394 nm optical excitation, the photoluminescence (PL) emission, excited state lifetime of the nanophosphor, exhibits greater performance than its bulk counterpart. The homogeneous spherical structure of the nanophosphors as compared with solid lumps of bulk phosphors is the basis for almost 40% of the enhancement in nanophosphors' intense red emission compared to the bulk. Moreover, the thermal stability of the nanophosphor is much better than the bulk phosphor, which clearly indicates a key advantage of nanophosphor. The superior performance of Eu3+-doped Y4Al2O9 nanophosphors over their bulk counterparts has been demonstrated for industrial phosphor-converted light-emitting diodes and visualization of latent fingerprint.

5.
Dalton Trans ; 47(35): 12228-12242, 2018 Sep 11.
Artículo en Inglés | MEDLINE | ID: mdl-30106407

RESUMEN

Feeble white emission with a low Colour Rendering Index (CRI) has become the principal gridlock for the extensive commercialization of phosphor converted white LEDs (pc-WLEDs). Fusion of red, green and blue emitting rare-earth (RE) ions in a suitable host can overcome these drawbacks but the energy migration between multiple RE ions at single excitation wavelength defines the key standpoint in designing such white light emitting phosphors. Apart from the abovementioned obstacles, recently traditional optical temperature sensors based on RE ions have faced difficulties due to their low relative sensitivity and large detection error. Keeping these points in mind, in this work, a series of MgAl2O4:Dy3+,Eu3+ nanophosphors are synthesized among which 2% Dy3+,0.2% Eu3+ doped MgAl2O4 nanophosphors demonstrate strong white emission with CIE co-ordinates of (0.31, 0.33), and high quantum yield (∼67%), which could be directly utilized for pc-WLED based solid state lighting devices. Detailed investigation of PL properties reveals that Eu3+ ions can be well sensitized by Dy3+ under near-ultraviolet excitation of 351 nm. Dexter's theory & Reisfeld's approximation are employed for an in-depth analysis of the inter-RE energy transfer (ET) mechanism, which signposts that the dipole-quadrupole interaction phenomenon is responsible for the ET process from Dy3+ to Eu3+. Additionally, the validated ET plays a pivotal role in demonstrating the self-referencing ratiometric temperature sensor behaviour supported by a distinct high temperature thermal quenching trend between Dy3+ and Eu3+ ions. Hence the obtained nanophosphors are highly promising for utilizing in WLED based solid state lighting and self-referencing ratiometric temperature sensor applications.

6.
ACS Omega ; 3(1): 788-800, 2018 Jan 31.
Artículo en Inglés | MEDLINE | ID: mdl-31457929

RESUMEN

In recent years, rare-earth-doped nanophosphors have attracted great attention in the field of luminescent materials for advanced solid-state lighting and high-resolution display applications. However, the low efficiency of concurrent red phosphors creates a major bottleneck for easy commercialization of these devices. In this work, intense red-light-emitting K+-codoped BaAl2O4:Eu3+ nanophosphors having an average crystallite size of 54 nm were synthesized via a modified sol-gel method. The derived nanophosphors exhibit strong red emission produced by the 5D0 → 7F J (J = 0, 1, 2, 3, 4) transitions of Eu3+ upon UV and low-voltage electron beam excitation. Comparative photoluminescence (PL) analysis is executed for Eu3+-activated and K+-coactivated BaAl2O4:Eu3+ nanophosphors, demonstrating remarkable enhancement in PL intensity as well as thermal stability due to K+ codoping. The origin of this PL enhancement is also analyzed from first-principles calculations using density functional theory. Achievement of charge compensation with the addition of a K+ coactivator plays an important role in increasing the radiative lifetime and color purity of the codoped nanophosphors. Obtained results substantially approve the promising prospects of this nanophosphor in the promptly growing field of solid-state lighting and field emission display devices.

7.
ACS Omega ; 2(8): 4216-4226, 2017 Aug 31.
Artículo en Inglés | MEDLINE | ID: mdl-31457716

RESUMEN

Developing portable, lightweight, and flexible energy storage systems has become a necessity with the advent of wearable electronic devices in our modern society. This work focuses on the fabrication of Co3O4 nanowires on a flexible carbon fabric (CoNW/CF) substrate by a simple cost-effective hydrothermal route. The merits of the high surface area of the prepared Co3O4 nanostructures result in an exceptionally high specific capacitance of 3290 F/g at a scan rate of 5 mV/s, which is close to their theoretical specific capacitance. Furthermore, a solid-state symmetric supercapacitor (SSC) based on CoNW/CF (CoNW/CF//CoNW/CF) was fabricated successfully. The device attains high energy and power densities of 6.7 Wh/kg and 5000 W/kg. It also demonstrates excellent rate capability and retains 95.3% of its initial capacitance after 5000 cycles. Further, the SSC holds its excellent performance at severe bending conditions. When a series assembly of four such devices is charged, it can store sufficient energy to power a series combination of five light-emitting diodes. Thus, this SSC device based on a three-dimensional coaxial architecture opens up new strategies for the design of next-generation flexible supercapacitors.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...