What sharks and mammals share.

The tooth shape of sharks and mice are regulated by a similar signaling center despite their teeth having very different geometries.

Developmental variability channels mouse molar evolution.

Do developmental systems preferentially produce certain types of variation that orient phenotypic evolution along preferred directions? At different scales, from the intra-population to the interspecific, the murine first upper molar shows repeated anterior elongation. Using a novel quantitative approach to compare the development of two mouse strains with short or long molars, we identified temporal, spatial and functional differences in tooth signaling center activity, that arise from differential tuning of the activation-inhibition mechanisms underlying tooth patterning. By tracing their fate, we could explain why only the upper first molar reacts via elongation of its anterior part. Despite a lack of genetic variation, individuals of the elongated strain varied in tooth length and the temporal dynamics of their signaling centers, highlighting the intrinsic instability of the upper molar developmental system. Collectively, these results reveal the variational properties of murine molar development that drive morphological evolution along a line of least resistance.

Over time species develop random mutations in their genetic sequence that causes their form to change. If this new form increases the survival of a species it will become favored through natural selection and is more likely to get passed on to future generations. But, the evolution of these new traits also depends on what happens during development. Developmental mechanisms control how an embryo progresses from a single cell to an adult organism made of many cells. Mutations that alter these processes can influence the physical outcome of development, and cause a new trait to form. This means that if many different mutations alter development in a similar way, this can lead to the same physical change, making it 'easy' for a new trait to repeatedly occur. Most of the research has focused on finding the mutations that underlie repeated evolution, but rarely on identifying the role of the underlying developmental mechanisms. To bridge this gap, Hayden et al. investigated how changes during development influence the shape and size of molar teeth in mice. In some wild species of mice, the front part of the first upper molar is longer than in other species. This elongation, which is repeatedly found in mice from different islands, likely came from developmental mechanisms. Tooth development in mice has been well-studied in the laboratory, and Hayden et al. started by identifying two strains of laboratory mice that mimic the teeth seen in their wild cousins, one with elongated upper first molars and another with short ones. Comparing how these two strains of mice developed their elongated or short teeth revealed key differences in the embryonic structures that form the upper molar and cause it to elongate. Further work showed that variations in these embryonic structures can even cause mice that are genetically identical to have longer or shorter upper first molars. These findings show how early differences during development can lead to small variations in form between adult species of mice. This study highlights how studying developmental differences as well as genetic sequences can further our understanding of how different species evolved.

Modeling Edar expression reveals the hidden dynamics of tooth signaling center patterning.

When patterns are set during embryogenesis, it is expected that they are straightly established rather than subsequently modified. The patterning of the three mouse molars is, however, far from straight, likely as a result of mouse evolutionary history. The first-formed tooth signaling centers, called MS and R2, disappear before driving tooth formation and are thought to be vestiges of the premolars found in mouse ancestors. Moreover, the mature signaling center of the first molar (M1) is formed from the fusion of two signaling centers (R2 and early M1). Here, we report that broad activation of Edar expression precedes its spatial restriction to tooth signaling centers. This reveals a hidden two-step patterning process for tooth signaling centers, which was modeled with a single activator-inhibitor pair subject to reaction-diffusion (RD). The study of Edar expression also unveiled successive phases of signaling center formation, erasing, recovering, and fusion. Our model, in which R2 signaling center is not intrinsically defective but erased by the broad activation preceding M1 signaling center formation, predicted the surprising rescue of R2 in Edar mutant mice, where activation is reduced. The importance of this R2-M1 interaction was confirmed by ex vivo cultures showing that R2 is capable of forming a tooth. Finally, by introducing chemotaxis as a secondary process to RD, we recapitulated in silico different conditions in which R2 and M1 centers fuse or not. In conclusion, pattern formation in the mouse molar field relies on basic mechanisms whose dynamics produce embryonic patterns that are plastic objects rather than fixed end points.

The Ectodysplasin receptor EDAR acts as a tumor suppressor in melanoma by conditionally inducing cell death.

Ectodysplasin receptor EDAR is seen as a typical Tumor Necrosis Factor receptor (TNFR) family member known to interact with its ligand Eda-A1, and signaling mainly through the nuclear factor-kappaB (NF-κB) and c-jun N-terminal kinases pathways. Mutations in genes that encode proteins involved in EDAR transduction cascade cause anhidrotic ectodermal dysplasia. Here, we report an unexpected pro-apoptotic activity of EDAR when unbound to its ligand Eda-A1, which is independent of NF-κB pathway. Contrarily to other death receptors, EDAR does recruit caspase-8 to trigger apoptosis but solely upon ligand withdrawal, thereby behaving as the so-called dependence receptors. We propose that pro-apoptotic activity of unbound EDAR confers it a tumor suppressive activity. Along this line, we identified loss-of-pro-apoptotic function mutations in EDAR gene in human melanoma. Moreover, we show that the invalidation of EDAR in mice promotes melanoma progression in a B-Raf mutant background. Together, these data support the view that EDAR constrains melanoma progression by acting as a dependence receptor.

Genomic regions controlling shape variation in the first upper molar of the house mouse.

Numerous loci of large effect have been shown to underlie phenotypic variation between species. However, loci with subtle effects are presumably more frequently involved in microevolutionary processes but have rarely been discovered. We explore the genetic basis of shape variation in the first upper molar of hybrid mice between Mus musculus musculus and M. m. domesticus. We performed the first genome-wide association study for molar shape and used 3D surface morphometrics to quantify subtle variation between individuals. We show that many loci of small effect underlie phenotypic variation, and identify five genomic regions associated with tooth shape; one region contained the gene microphthalmia-associated transcription factor Mitf that has previously been associated with tooth malformations. Using a panel of five mutant laboratory strains, we show the effect of the Mitf gene on tooth shape. This is the first report of a gene causing subtle but consistent variation in tooth shape resembling variation in nature.

Mechanical constraint from growing jaw facilitates mammalian dental diversity.

Much of the basic information about individual organ development comes from studies using model species. Whereas conservation of gene regulatory networks across higher taxa supports generalizations made from a limited number of species, generality of mechanistic inferences remains to be tested in tissue culture systems. Here, using mammalian tooth explants cultured in isolation, we investigate self-regulation of patterning by comparing developing molars of the mouse, the model species of mammalian research, and the bank vole. A distinct patterning difference between the vole and the mouse molars is the alternate cusp offset present in the vole. Analyses of both species using 3D reconstructions of developing molars and jaws, computational modeling of cusp patterning, and tooth explants cultured with small braces show that correct cusp offset requires constraints on the lateral expansion of the developing tooth. Vole molars cultured without the braces lose their cusp offset, and mouse molars cultured with the braces develop a cusp offset. Our results suggest that cusp offset, which changes frequently in mammalian evolution, is more dependent on the 3D support of the developing jaw than other aspects of tooth shape. This jaw-tooth integration of a specific aspect of the tooth phenotype indicates that organs may outsource specific aspects of their morphology to be regulated by adjacent body parts or organs. Comparative studies of morphologically different species are needed to infer the principles of organogenesis.

Transcriptomic signatures shaped by cell proportions shed light on comparative developmental biology.

BACKGROUND: Comparative transcriptomics can answer many questions in developmental and evolutionary developmental biology. Most transcriptomic studies start by showing global patterns of variation in transcriptomes that differ between species or organs through developmental time. However, little is known about the kinds of expression differences that shape these patterns. RESULTS: We compared transcriptomes during the development of two morphologically distinct serial organs, the upper and lower first molars of the mouse. We found that these two types of teeth largely share the same gene expression dynamics but that three major transcriptomic signatures distinguish them, all of which are shaped by differences in the relative abundance of different cell types. First, lower/upper molar differences are maintained throughout morphogenesis and stem from differences in the relative abundance of mesenchyme and from constant differences in gene expression within tissues. Second, there are clear time-shift differences in the transcriptomes of the two molars related to cusp tissue abundance. Third, the transcriptomes differ most during early-mid crown morphogenesis, corresponding to exaggerated morphogenetic processes in the upper molar involving fewer mitotic cells but more migrating cells. From these findings, we formulate hypotheses about the mechanisms enabling the two molars to reach different phenotypes. We also successfully applied our approach to forelimb and hindlimb development. CONCLUSIONS: Gene expression in a complex tissue reflects not only transcriptional regulation but also abundance of different cell types. This knowledge provides valuable insights into the cellular processes underpinning differences in organ development. Our approach should be applicable to most comparative developmental contexts.

Tinkering signaling pathways by gain and loss of protein isoforms: the case of the EDA pathway regulator EDARADD.

BACKGROUND: Only a handful of signaling pathways are major actors of development and responsible for both the conservation and the diversification of animal morphologies. To explain this twofold nature, gene duplication and enhancer evolution were predominantly put forth as tinkering mechanisms whereas the evolution of alternative isoforms has been, so far, overlooked. We investigate here the role of gain and loss of isoforms using Edaradd, a gene of the Ecodysplasin pathway, implicated in morphological evolution. A previous study had suggested a scenario of isoform gain and loss with an alternative isoform (A) newly gained in mammals but secondarily lost in mouse lineage. RESULTS: For a comprehensive view of A and B Edaradd isoforms history during mammal evolution, we obtained sequences for both isoforms in representative mammals and performed in vitro translations to support functional predictions. We showed that the ancestral B isoform is well conserved, whereas the mammal-specific A isoform was lost at least 7 times independently in terminal lineages throughout mammal phylogeny. Then, to gain insights into the functional relevance of this evolutionary pattern, we compared the biological function of these isoforms: i) In cellulo promoter assays showed that they are transcribed from two alternative promoters, only B exhibiting feedback regulation. ii) RT-PCR in various tissues and ENCODE data suggested that B isoform is systematically expressed whereas A isoform showed a more tissue-specific expression. iii) Both isoforms activated the NF-κB pathway in an in cellulo reporter assay, albeit at different levels and with different dynamics since A isoform exhibited feedback regulation at the protein level. Finally, only B isoform could rescue a zebrafish edaradd knockdown. CONCLUSIONS: These results suggest that the newly evolved A isoform enables modulating EDA signaling in specific conditions and with different dynamics. We speculate that during mammal diversification, A isoform regulation may have evolved rapidly, accompanying and possibly supporting the diversity of ectodermal appendages, while B isoform may have ensured essential roles. This study makes the case to pay greater attention to mosaic loss of evolutionarily speaking "young" isoforms as an important mechanism underlying phenotypic diversity and not simply as a manifestation of neutral evolution.

Transcriptomics of developing embryos and organs: A raising tool for evo-devo.

Comparative transcriptomics has become an important tool for revisiting many evo-devo questions and exploring new ones, and its importance is likely to increase in the near future, partly because RNA-seq data open many new possibilities. The aim of this opinion piece is twofold. In the first section, we discuss the particularities of transcriptomic studies in evo-devo, focusing mainly on RNA-seq data. The preliminary processing steps (getting coding sequences as well as expression levels) are challenging, because many studied species do not have a sequenced genome. The next step (interpreting expression differences) is also challenging, due to several issues with interpreting expression levels in complex tissues, managing developmental stages and species heterochronies, and the problem of conceptualizing expression differences. In the second section, we discuss some past and possible future applications of transcriptomic approaches (using microarray or RNA-seq) to three major themes in evo-devo: the evolution of the developmental toolkit, the genetic and developmental basis for phenotypic changes, and the general rules of the evolution of development. We believe that conceptual and technical tools are necessary in order to fully exploit the richness of multispecies transcriptomic time-series data.

The ectodysplasin pathway: from diseases to adaptations.

The ectodysplasin (EDA) pathway, which is active during the development of ectodermal organs, including teeth, hairs, feathers, and mammary glands, and which is crucial for fine-tuning the developmental network controlling the number, size, and density of these structures, was discovered by studying human patients affected by anhidrotic/hypohidrotic ectodermal dysplasia. It comprises three main gene products: EDA, a ligand that belongs to the tumor necrosis factor (TNF)-α family, EDAR, a receptor related to the TNFα receptors, and EDARADD, a specific adaptor. This core pathway relies on downstream NF-κB pathway activation to regulate target genes. The pathway has recently been found to be associated with specific adaptations in natural populations: the magnitude of armor plates in sticklebacks and the hair structure in Asian human populations. Thus, despite its role in human disease, the EDA pathway is a 'hopeful pathway' that could allow adaptive changes in ectodermal appendages which, as specialized interfaces with the environment, are considered hot-spots of morphological evolution.

Differential evolvability along lines of least resistance of upper and lower molars in island house mice.

Variation within a population is a key feature in evolution, because it can increase or impede response to selection, depending on whether or not the intrapopulational variance is correlated to the change under selection. Hence, main directions of genetic variance have been proposed to constitute "lines of least resistance to evolution" along which evolution would be facilitated. Yet, the screening of selection occurs at the phenotypic level, and the phenotypic variance is not only the product of the underlying genetic variance, but also of developmental processes. It is thus a key issue for interpreting short and long term evolutionary patterns to identify whether main directions of phenotypic variance indeed constitute direction of facilitated evolution, and whether this is favored by developmental processes preferably generating certain phenotypes. We tackled these questions by a morphometric quantification of the directions of variance, compared to the direction of evolution of the first upper and lower molars of wild continental and insular house mice. The main phenotypic variance indeed appeared as channeling evolution between populations. The upper molar emerged as highly evolvable, because a strong allometric component contributed to its variance. This allometric relationship drove a repeated but independent evolution of a peculiar upper molar shape whenever size increased. This repeated evolution, together with knowledge about the molar development, suggest that the main direction of phenotypic variance correspond here to a "line of least developmental resistance" along which evolution between population is channeled.

Patterning by heritage in mouse molar row development.

It is known from paleontology studies that two premolars have been lost during mouse evolution. During mouse mandible development, two bud-like structures transiently form that may represent rudimentary precursors of the lost premolars. However, the interpretation of these structures and their significance for mouse molar development are highly controversial because of a lack of molecular data. Here, we searched for typical tooth signaling centers in these two bud-like structures, and followed their fate using molecular markers, 3D reconstructions, and lineage tracing in vitro. Transient signaling centers were indeed found to be located at the tips of both the anterior and posterior rudimentary buds. These centers expressed a similar set of molecular markers as the "primary enamel knot" (pEK), the signaling center of the first molar (M1). These two transient signaling centers were sequentially patterned before and anterior to the M1 pEK. We also determined the dynamics of the M1 pEK, which, slightly later during development, spread up to the field formerly occupied by the posterior transient signaling center. It can be concluded that two rudimentary tooth buds initiate the sequential development of the mouse molars and these have previously been mistaken for early stages of M1 development. Although neither rudiment progresses to form an adult tooth, the posterior one merges with the adjacent M1, which may explain the anterior enlargement of the M1 during mouse family evolution. This study highlights how rudiments of lost structures can stay integrated and participate in morphogenesis of functional organs and help in understanding their evolution, as Darwin suspected long ago.

Developmental constraints revealed by co-variation within and among molar rows in two murine rodents.

Morphological integration corresponds to interdependency between characters that can arise from several causes. Proximal causes of integration include that different phenotypic features may share common genetic sets and/or interact during their development. Ultimate causes may be the prolonged effect of selection favoring integration of functionally interacting characters, achieved by the molding of these proximal causes. Strong and direct interactions among successive teeth of a molar row are predicted by genetic and developmental evidences. Functional constraints related to occlusion, however, should have selected more strongly for a morphological integration of occluding teeth and a corresponding evolution of the underlying developmental and genetic pathways. To investigate how these predictions match the patterns of phenotypic integration, we studied the co-variation among the six molars of the murine molar row, focusing on two populations of house mice (Mus musculus domesticus) and wood mice (Apodemus sylvaticus). The size and shape of the three upper and lower molars were quantified and compared. Our results evidenced similar patterns in both species, size being more integrated than shape among all the teeth, and both size and shape co-varying strongly between adjacent teeth, but also between occluding teeth. Strong co-variation within each molar row is in agreement with developmental models showing a cascade influence of the first molar on the subsequent molars. In contrast, the strong co-variation between molars of the occluding tooth rows confirms that functional constraints molded patterns of integration and probably the underlying developmental pathways despite the low level of direct developmental interactions occurring among molar rows. These patterns of co-variation are furthermore conserved between the house mouse and the wood mouse that diverged >10 Ma, suggesting that they may constitute long-running constraints to the diversification of the murine rodent dentition.

Heterochronic shifts explain variations in a sequentially developing repeated pattern: palatal ridges of muroid rodents.

Metazoans are largely made of repeated parts, and metazoan evolution is marked by changes in the number of these parts, called meristic evolution. Understanding the mechanisms associated with meristic changes is thus a critical issue to evolutionary developmental biology. Palatal rugae are sensory ridges regularly arranged on the hard palate of mammals. They develop sequentially following mesio-distal growth of the palate, and activation-inhibition mechanisms very likely control spacing and timing of this sequential addition. In this study, we characterized trends in rugae number evolution among muroid rodents, showing that most species display 8+/-1 rugae, changes by one being very frequent in the phylogeny. We then compared development of three muroid species: mouse (nine rugae), rat (eight), and golden hamster (seven). We showed that palatal growth rate, spacing, and addition rate in mouse/rat were remarkably similar (with respect to the embryo size difference), and that increase to nine rugae in mouse is achieved by postponing the end of the addition process (hypermorphosis). Such a heterochronic shift may be typical of +/-1 variations observed among muroid rodents. In contrast, decrease to seven rugae in golden hamster is attributed to early growth termination (progenesis) of the palate, which correlates with the severe shortening of gestation in this species. Our results provide an experimental support to the intuitive view that heterochronies are especially relevant to meristic evolution of traits that rely on a sequential addition process. We also interpret our results in the light of developmental constraints specifically linked to this kind of process.

Distinct impacts of Eda and Edar loss of function on the mouse dentition.

BACKGROUND: The Eda-A1-Edar signaling pathway is involved in the development of organs with an ectodermal origin, including teeth. In mouse, mutants are known for both the ligand, Eda-A1 (Tabby), and the receptor, Edar (Downless). The adult dentitions of these two mutants have classically been considered to be similar. However, previous studies mentioned differences in embryonic dental development between Eda(Ta) and Edar(dl-J) mutants. A detailed study of tooth morphology in mutants bearing losses of functions of these two genes thus appears necessary to test the pattern variability induced by the developmental modifications. METHODOLOGY/PRINCIPAL FINDINGS: 3D-reconstructions of the cheek teeth have been performed at the ESRF (Grenoble, France) by X-ray synchrotron microtomography to assess dental morphology. The morphological variability observed in Eda(Ta) and Edar(dl-J) mutants have then been compared in detail. Despite patchy similarities, our detailed work on cheek teeth in Eda(Ta) and Edar(dl-J) mice show that all dental morphotypes defined in Edar(dl-J) mice resolutely differ from those of Eda(Ta) mice. This study reveals that losses of function of Eda and Edar have distinct impacts on the tooth size and morphology, contrary to what has previously been thought. CONCLUSION/SIGNIFIANCE: The results indicate that unknown mechanisms of the Eda pathway are implicated in tooth morphogenesis. Three hypotheses could explain our results; an unexpected role of the Xedar pathway (which is influenced by the Eda gene product but not that of Edar), a more complex connection than has been appreciated between Edar and another protein, or a ligand-independent activity for Edar. Further work is necessary to test these hypotheses and improve our understanding of the mechanisms of development.

Effect of eda loss of function on upper jugal tooth morphology.

The Tabby/eda mice, which bear a loss of function mutation for the eda (ectodysplasinA) gene, are known to display developmental anomalies in organs with an ectodermal origin. Although the lower jugal (cheek) teeth of Tabby/eda mice have been extensively studied, upper teeth have never been investigated in detail. However, this may help us to further understand the function of the eda gene in tooth development. In this work, the shape and size of both the crown and the radicular system were studied in the Tabby/eda mice upper jugal teeth. To deal with the high morphological variability, we defined several morphotypes based on cusp numbers and position. Statistical tests were then performed within and between the different morphotypes to test the correlation between tooth size and morphology. Our analysis reveals that, as in lower teeth, eda is necessary to segment the dental lamina into three teeth with the characteristic size and proportions of the mouse. Nevertheless, since strong effects are observed in heterozygous upper teeth while lower are only mildly affected, it seems that the upper jaw is more sensitive than the lower jaw to the loss of eda function. Modifications in cusp number and the abnormal crown size of the teeth are clearly linked, and our results indicate a role of eda in cusp patterning. Moreover, we found that the Tabby mutation induces variations in the dental root pattern, sometimes associated with hypercementosis, suggesting a newly uncovered role played by eda in root patterning and formation.

Patterning of palatal rugae through sequential addition reveals an anterior/posterior boundary in palatal development.

BACKGROUND: The development of the secondary palate has been a main topic in craniofacial research, as its failure results in cleft palate, one of the most common birth defects in human. Nevertheless, palatal rugae (or rugae palatinae), which are transversal ridges developing on the secondary palate, received little attention. However, rugae could be useful as landmarks to monitor anterior/posterior (A/P) palatal growth, and they provide a simple model of mesenchymal-epithelial structures arranged in a serial pattern. RESULTS: We first determined in which order the nine mouse rugae appear during development. Our results revealed a reiterative process, which is coupled with A/P growth of palatal shelves, and by which rugae 3 to 7b are sequentially interposed, in the increasing distance between the second most anterior ruga, ruga 2, and the two most posterior rugae, rugae 8 and 9. We characterized the steps of ruga interposition in detail, showing that a new ruga forms from an active zone of high proliferation rate, next to the last formed ruga. Then, by analyzing the polymorphism of wild type and Eda(Ta) mutant mice, we suggest that activation-inhibition mechanisms may be involved in positioning new rugae, like for other skin appendages. Finally, we show that the ruga in front of which new rugae form, i.e. ruga 8 in mouse, coincides with an A/P gene expression boundary in the palatal shelves (Shox2/Meox2-Tbx22). This coincidence is significant, since we also found it in hamster, despite differences in the adult ruga pattern of these two species. CONCLUSION: We showed that palatal rugae are sequentially added to the growing palate, in an interposition process that appears to be dependent on activation-inhibition mechanisms and reveals a new developmental boundary in the growing palate. Further studies on rugae may help to shed light on both the development and evolution of structures arranged in regular patterns. Moreover, rugae will undoubtedly be powerful tools to further study the anteroposterior regionalization of the growing palate.

Conserved features and evolutionary shifts of the EDA signaling pathway involved in vertebrate skin appendage development.

It is widely accepted that evolutionary changes in conserved developmental signaling pathways play an important role in morphological evolution. However, few in silico studies were interested in tracking such changes in a signaling pathway. The Ectodysplasin (EDA) pathway provides an opportunity to fill this gap because it is involved in vertebrate skin appendage development such as scales, teeth, hair, and feathers that take an obvious part in the adaptation of species to their environment. We benefited from the large amount of genomic data now available to explore the evolution of the upstream genes of the EDA pathway. In mammals, these genes are eda (encoding 2 ligands, EDA-A1 and EDA-A2), edar (EDA-A1 receptor), edaradd (EDA receptor [EDAR] adapter), xedar (EDA-A2 receptor), and troy (a XEDAR-related receptor). We show that the evolution of EDA pathway genes combines both strongly conserved features and evolutionary shifts. These shifts are found at different signaling levels (from the ligand to intracellular signaling) and at different taxonomic levels (class, suborder, and genera). Although conserved features likely participate to the similarities found in the early development of vertebrate skin appendages, these shifts might account for innovations and specializations. Moreover, our study demonstrates that we can now benefit from the large number of sequenced vertebrate genomes to explore the evolution of specific signaling pathways and thereby to open new perspectives for developmental biology and evolutionary developmental biology.

Disruption of the palatal rugae pattern in Tabby (eda) mutant mice.

The eda mouse gene is linked with anomalies of ectodermal derivatives, such as hair, glands, and teeth. The palatal rugae (oral mucosa foldings on the hard palate) are also ectodermal derivatives. Therefore, we searched for and compared palatal rugae anomalies of Tabby mice bearing a mutation in the eda gene with their wild-type counterparts. We compared the number and shape of palatal rugae in 179 mutant and 102 wild-type mice from four different stocks of Tabby mice. Palatal rugae anomalies were documented at a low frequency in wild-type mice of different backgrounds, which may reflect a lack of robustness of palatal rugae development. However, the proportion of anomalies observed in the C57BL/6J background makes us recommend avoiding its use in further palate studies. We showed statistically that the phenotypic variability seen in wild-type animals is further increased in Tabby mutants. The anomalies mainly included various forms of reduction, with rugae IV-VI being more frequently affected. Those rugae were shortened, dotted or absent (mainly ruga V). By analogy to the role played by eda in other ectodermal derivatives, we propose that it might play a role in defining the pattern of the palatal rugae.

A nutrient sensor mechanism controls Drosophila growth.

Organisms modulate their growth according to nutrient availability. Although individual cells in a multicellular animal may respond directly to nutrient levels, growth of the entire organism needs to be coordinated. Here, we provide evidence that in Drosophila, coordination of organismal growth originates from the fat body, an insect organ that retains endocrine and storage functions of the vertebrate liver. In a genetic screen for growth modifiers, we identified slimfast, a gene that encodes an amino acid transporter. Remarkably, downregulation of slimfast specifically within the fat body causes a global growth defect similar to that seen in Drosophila raised under poor nutritional conditions. This involves TSC/TOR signaling in the fat body, and a remote inhibition of organismal growth via local repression of PI3-kinase signaling in peripheral tissues. Our results demonstrate that the fat body functions as a nutrient sensor that restricts global growth through a humoral mechanism.