Cs2Fe2(MoO4)3-A Strongly Frustrated Magnet with Orbital Degrees of Freedom and Magnetocaloric Properties.

We report an in-depth study of the thermodynamic and magnetocaloric properties of a strongly frustrated magnet, Cs2Fe2(MoO4)3. The underlying structure belongs to the double trillium lattice, which consists of two FeII (S = 2) sites with easy-axis and easy-plane single-ion anisotropy. Detailed 57Fe Mössbauer spectroscopic investigations along with ligand-field calculations support the existence of disparate ground states. The antiferromagnetic ordered structure is presented by the propagation vector k = (0,0,0) with noncollinear magnetic moments of 2.97 µB (Fe1) and 0.17 µB (Fe2), respectively. Strong and disordered magnetic correlations exist in the temperature regime between T N ≈ 1.0 K and |θCW| ≈ 22 K. The large degeneracy of the ground state is investigated in terms of its magnetocaloric response. Magnetization and specific heat measurements indicate a significant magnetocaloric cooling efficiency, making this rare-earth-free compound a promising candidate for cryogenic magnetic refrigeration applications, with refrigeration capacity of 79 J kg-1 for Δ(µ0 H) = 8 T.

Lithium confinement and dynamics in hexagonal and monoclinic tungsten oxide nanocrystals: a 7Li solid state NMR study.

Mixed-valence tungsten bronzes AxWO3 (A = alkali metal, NH4+, etc.) are a series of compounds with adaptive structural and compositional features that make them a hot research topic in thermoelectrics, electrochromics, catalysis or energy applications in battery electrodes. The mixed hexagonal lithium ammonium bronze Lix(NH4)yWO3 is a new member of this structural family whose properties are compared to those of the pure hexagonal tungsten bronze (NH4)xWO3. Surface and structural (nanoconfined) Li+ cations were characterized by 7Li single pulse excitation and 1H-7Li cross-polarization (CP) NMR experiments. CP build-up curves and two-dimensional heteronuclear correlation solid-state NMR techniques provide information about the spatial connectivity between different proton and Li+ species. At 500 °C the bronze structurally transforms from the hexagonal to a monoclinic phase, and defects are formed that are characterized through the Li+ environment. 7Li exchange spectroscopy (EXSY) NMR experiments provide information about the chemical exchange between the lithium species. The measured 7Li T1 and T2 relaxation time constants and the T1/T2 ratio allow characterizing the local strength of Li+ binding.

Reactivity of FeMoO4 in CsCl Fluxes and Formation of the Salt-Inclusion Type of Compounds.

The reactivity of FeMoO4 in CsCl fluxes has been investigated by thermal analysis and chemical reactions in evacuated silica ampules. The products have been characterized by ex situ X-ray diffraction methods. Metathesis reactions involving CsCl lead to the formation of Cs2Fe2(MoO4)3 and the salt adduct Cs2FeCl4·CsCl. A side reaction has been observed, which is associated with a decomposition of [MoO4]2- in CsCl fluxes yielding Cs2Mo2O7·CsCl, which contains the rare pyromolybdate anion, [Mo2O7]2-, located in the center of a ∞2[CsCl] hetero-honeycomb arrangement. This salt-inclusion type of compound has been studied further in terms of its formation starting from Cs2MoO4, MoO3, and CsCl. The intermediate adduct phase, Cs2MoO4·MoO3, contains uncharged ∞1[MoO2O2/2] chains that react with CsCl at elevated temperatures to Cs2Mo2O7·CsCl. Furthermore, the site preference for alkaline-metal cations (K+, Rb+, and Cs+) has been evaluated for a mixed substitution series. In accordance with the Pearson concept, the polarizability of the respect cation outweighs any size differences for the occupancy of the salt-intergrowth motif, the honeycomb part of the structure.

High-throughput synthesis of CeO2 nanoparticles for transparent nanocomposites repelling Pseudomonas aeruginosa biofilms.

Preventing bacteria from adhering to material surfaces is an important technical problem and a major cause of infection. One of nature's defense strategies against bacterial colonization is based on the biohalogenation of signal substances that interfere with bacterial communication. Biohalogenation is catalyzed by haloperoxidases, a class of metal-dependent enzymes whose activity can be mimicked by ceria nanoparticles. Transparent CeO2/polycarbonate surfaces that prevent adhesion, proliferation, and spread of Pseudomonas aeruginosa PA14 were manufactured. Large amounts of monodisperse CeO2 nanoparticles were synthesized in segmented flow using a high-throughput microfluidic benchtop system using water/benzyl alcohol mixtures and oleylamine as capping agent. This reduced the reaction time for nanoceria by more than one order of magnitude compared to conventional batch methods. Ceria nanoparticles prepared by segmented flow showed high catalytic activity in halogenation reactions, which makes them highly efficient functional mimics of haloperoxidase enzymes. Haloperoxidases are used in nature by macroalgae to prevent formation of biofilms via halogenation of signaling compounds that interfere with bacterial cell-cell communication ("quorum sensing"). CeO2/polycarbonate nanocomposites were prepared by dip-coating plasma-treated polycarbonate panels in CeO2 dispersions. These showed a reduction in bacterial biofilm formation of up to 85% using P. aeruginosa PA14 as model organism. Besides biofilm formation, also the production of the virulence factor pyocyanin in is under control of the entire quorum sensing systems P. aeruginosa. CeO2/PC showed a decrease of up to 55% in pyocyanin production, whereas no effect on bacterial growth in liquid culture was observed. This indicates that CeO2 nanoparticles affect quorum sensing and inhibit biofilm formation in a non-biocidal manner.

Panchromatic Absorption and Oxidation of an Iron(II) Spin Crossover Complex.

In order to expand and exploit the useful properties of d6-iron(II) and d5-iron(III) complexes in potential magnetic, photophysical, or magnetooptical applications, crucial ligand-controlled parameters are the ligand field strength in a given coordination mode and the availability of suitable metal and ligand frontier orbitals for charge-transfer processes. The push-pull ligand 2,6-diguanidylpyridine (dgpy) features low-energy π* orbitals at the pyridine site and strongly electron-donating guanidinyl donors combined with the ability to form six-membered chelate rings for optimal metal-ligand orbital overlap. The electronic ground states of the pseudo-octahedral d6- and d5-complexes mer-[Fe(dgpy)2]2+, cis-fac-[Fe(dgpy)2]2+, and mer-[Fe(dgpy)2]3+ as well as their charge-transfer (CT) and metal-centered (MC) excited states are probed by variable temperature UV/vis absorption, NMR, EPR, and Mössbauer spectroscopy, magnetic susceptibility measurements at variable temperature as well as quantum chemical calculations.

Magneli-type tungsten oxide nanorods as catalysts for the selective oxidation of organic sulfides.

Selective oxidation of thioethers is an important reaction to obtain sulfoxides as synthetic intermediates for applications in the chemical industry, medicinal chemistry and biology or the destruction of warfare agents. The reduced Magneli-type tungsten oxide WO3-x possesses a unique oxidase-like activity which facilitates the oxidation of thioethers to the corresponding sulfoxides. More than 90% of the model system methylphenylsulfide could be converted to the sulfoxide with a selectivity of 98% at room temperature within 30 minutes, whereas oxidation to the corresponding sulfone was on a time scale of days. The concentration of the catalyst had a significant impact on the reaction rate. Reasonable catalytic effects were also observed for the selective oxidation of various organic sulfides with different substituents. The WO3-x nanocatalysts could be recycled at least 5 times without decrease in activity. We propose a metal oxide-catalyzed route based on the clean oxidant hydrogen peroxide. Compared to other molecular or enzyme catalysts the WO3-x system is a more robust redox-nanocatalyst, which is not susceptible to decomposition or denaturation under standard conditions. The unique oxidase-like activity of WO3-x can be used for a wide range of applications in synthetic, environmental or medicinal chemistry.

High-speed solid state fluorination of Nb2O5 yields NbO2F and Nb3O7F with photocatalytic activity for oxygen evolution from water.

Solid state reactions are slow because the diffusion of atoms or ions through the reactant, intermediate and crystalline product phases is the rate-limiting step. This requires days or even weeks of high temperature treatment, and consumption of large amounts of energy. We employed spark-plasma sintering, an engineering technique that is used for high-speed consolidation of powders with a pulsed electric current passing through the sample to carry out the fluorination of niobium oxide in minute intervals. The approach saves time and large amounts of waste energy. Moreover, it allows the preparation of fluorinated niobium oxides on a gram scale using poly(tetrafluoroethylene) (®Teflon) scrap and without toxic chemicals. The synthesis can be upscaled easily to the kg range with appropriate sintering equipment. Finally, NbO2F and Nb3O7F prepared by spark plasma sintering show significant photoelectrocatalytic (PEC) oxygen evolution from water in terms of photocurrent density and incident photon-to-current efficiency (% IPCE), whereas NbO2F and Nb3O7F prepared by conventional high temperature chemistry show little to no PEC response. Our study is a proof of concept for the quick, clean and energy saving production of valuable photocatalysts from plastic waste.

Gram-scale selective synthesis of WO3-x nanorods and (NH4)xWO3 ammonium tungsten bronzes with tunable plasmonic properties.

Localized surface plasmon resonance properties in unconventional materials like metal oxides or chalcogenide semiconductors have been studied for use in signal detection and analysis in biomedicine and photocatalysis. We devised a selective synthesis of the tungsten oxides WO3-x and (NH4)xWO3 with tunable plasmonic properties. We selectively synthesized WO3-x nanorods with different aspect ratios and hexagonal tungsten bronzes (NH4)xWO3 as truncated nanocubes starting from ammonium metatungstate (NH4)6H2W12O40·xH2O. Both particles form from the same nuclei at temperatures >200 °C; monomer concentration and surfactant ratio are essential variables for phase selection. (NH4)xWO3 was the preferred reaction product only for fast heating rates (25 K min-1), slow stirring speeds (∼150 rpm) and high precursor concentrations. A proton nuclear magnetic resonance (1H-NMR) spectroscopic study of the reaction mechanism revealed that oleyl oleamide, formed from oleic acid and oleylamine upon heating, is a key factor for the selective formation of WO3-x nanorods. Since oleic acid and oleylamine are standard surfactants for the wet chemical synthesis of many metal and oxide nanoparticles, the finding that oleyl oleamide acts as a chemically active reagent above 250 °C may have implications for many nanoparticle syntheses. Oriented attachment of polyoxotungstate anions is proposed as a model to rationalize phase selectivity. Magic angle spinning (MAS) 1H-NMR and powder X-ray diffraction (PXRD) studies of the bronze after annealing under (non)inert conditions revealed an oxidative phase transition. WO3-x and (NH4)xWO3 show a strong plasmon absorption for near infra-red light between 800 and 3300 nm. The maxima of the plasmon bands shift systematically with the nanocrystal aspect ratio.

A Generalized Method for High-Speed Fluorination of Metal Oxides by Spark Plasma Sintering Yields Ta3 O7 F and TaO2 F with High Photocatalytic Activity for Oxygen Evolution from Water.

A general method to carry out the fluorination of metal oxides with poly(tetrafluoroethylene) (PTFE, Teflon) waste by spark plasma sintering (SPS) on a minute scale with Teflon is reported. The potential of this new approach is highlighted by the following results. i) The tantalum oxyfluorides Ta3 O7 F and TaO2 F are obtained from plastic scrap without using toxic or caustic chemicals for fluorination. ii) Short reaction times (minutes rather than days) reduce the process time the energy costs by almost three orders of magnitude. iii) The oxyfluorides Ta3 O7 F and TaO2 F are produced in gram amounts of nanoparticles. Their synthesis can be upscaled to the kg range with industrial sintering equipment. iv) SPS processing changes the catalytic properties: while conventionally prepared Ta3 O7 F and TaO2 F show little catalytic activity, SPS-prepared Ta3 O7 F and TaO2 F exhibit high activity for photocatalytic oxygen evolution, reaching photoconversion efficiencies up to 24.7% and applied bias to photoconversion values of 0.86%. This study shows that the materials properties are dictated by the processing which poses new challenges to understand and predict the underlying factors.

Selective Synthesis of Monodisperse CoO Nanooctahedra as Catalysts for Electrochemical Water Oxidation.

Thermal decomposition is a promising route for the synthesis of metal oxide nanoparticles because size and morphology can be tuned by minute control of the reaction variables. We synthesized CoO nanooctahedra with diameters of ∼48 nm and a narrow size distribution. Full control over nanoparticle size and morphology could be obtained by controlling the reaction time, surfactant ratio, and reactant concentrations. We show that the particle size does not increase monotonically with time or surfactant concentration but passes through minima or maxima. We unravel the critical role of the surfactants in nucleation and growth and rationalize the observed experimental trends in accordance with simulation experiments. The as-synthesized CoO nanooctahedra exhibit superior electrocatalytic activity with long-term stability during oxygen evolution. The morphology of the CoO particles controls the electrocatalytic reaction through the distinct surface sites involved in the oxygen evolution reaction.

Nanocomposite antimicrobials prevent bacterial growth through the enzyme-like activity of Bi-doped cerium dioxide (Ce1-xBixO2-δ).

Preventing bacterial adhesion on materials surfaces is an important problem in marine, industrial, medical and environmental fields and a topic of major medical and societal importance. A defense strategy of marine organisms against bacterial colonization relies on the biohalogenation of signaling compounds that interfere with bacterial communication. These reactions are catalyzed by haloperoxidases, a class of metal-dependent enzymes, whose activity can be emulated by ceria nanoparticles. The enzyme-like activity of ceria was enhanced by a factor of 3 through bismuth substitution (Ce1-xBixO2-δ). The solubility of Bi3+ in CeO2 is confined to the range 0 < x < 0.25 under quasi-hydrothermal conditions. The Bi3+ cations are located close to the nanoparticle surface because their ionic radii are larger than those of the tetravalent Ce4+ ions. The synthesis of Ce1-xBixO2-δ (0 < x < 0.25) nanoparticles was upscaled to yields of ∼50 g. The halogenation activity of Ce1-xBixO2-δ was demonstrated with phenol red assays. The maximum activity for x ≈ 0.2 is related to the interplay of the ζ-potential of surface-engineered Ce1-xBixO2-δ nanoparticles and their BET surface area. Ce0.80Bi0.20O1.9 nanoparticles with optimized activity were incorporated in polyethersulfone beads, which are typical constituents of water filter membrane supports. Although Ce1-xBixO2-δ nanoparticles are not bactericidal on their own, naked Ce1-xBixO2-δ nanoparticles and polyethersulfone/Ce1-xBixO2-δ nanocomposites showed a strongly reduced bacterial coverage. We attribute the decreased adhesion of the Gram-negative soil bacterium Pseudomonas aeruginosa and of Phaeobacter gallaeciensis, a primary bacterial colonizer in marine biofilms, to the formation of halogenated signaling compounds. No biocides are needed, H2O2 (formed in daylight) and halide are the only substrates required. The haloperoxidase-like activity of Ce1-xBixO2-δ may be a promising starting point for the development of environmentally friendly, "green" nanocomposites, when the use of conventional biocides is prohibited.

Effect of anion substitution on the structural and transport properties of argyrodites Cu7PSe6-xSx.

Inspired by the good performance of argyrodites as ion conducting thermoelectrics and as solid electrolytes we investigated the effect of isovalent S2- substitution for Se2- in Cu7PSe6. At room temperature Cu7PSe6 crystallizes in the primitive cubic ß-polymorph of the argyrodite structure and transforms to the face-centered high-temperature (HT) γ-modification above 320 K. The transition for the homologous Cu7PS6 occurs at 510 K. Promising thermoelectric and ion conducting properties are observed only in the HT modification, where the cations are mobile. Using Rietveld refinements against X-ray diffraction data the effect of isovalent S2- substitution for Se2- on the structural and transport properties in Cu7PSe6-xSx was analyzed. While a step-wise incorporation of S2- showed typical behavior for a homogeneous solid solution series, the analysis of the diffraction data gave clear evidence of anion ordering due to site preference of the sulfide ions, which can be rationalized using Pearson's HSAB concept. This leads to a stabilization of the HT structure even at lower temperatures. This selective control enables new strategies for the design of argyrodite materials, as isovalent substitution not only allows an engineering of properties, but also permits the stabilization of the polymorph with the most promising properties.

Mixed Ligand Shell Formation upon Catechol Ligand Adsorption on Hydrophobic TiO2 Nanoparticles.

Modifying the surfaces of metal oxide nanoparticles (NPs) with monolayers of ligands provides a simple and direct method to generate multifunctional coatings by altering their surface properties. This works best if the composition of the monolayers can be controlled. Mussel-inspired, noninnocent catecholates stand out from other ligands like carboxylates and amines because they are redox-active and allow for highly efficient surface binding and enhanced electron transfer to the surface. However, a comprehensive understanding of their surface chemistry, including surface coverage and displacement of the native ligand, is still lacking. Here, we unravel the displacement of oleate (OA) ligands on hydrophobic, OA-stabilized TiO2 NPs by catecholate ligands using a combination of one- and two-dimensional nuclear magnetic resonance (NMR) spectroscopy techniques. Conclusive pictures of the ligand shells before and after surface modification with catecholate were obtained by 1H and 13C NMR spectroscopy (the 13C chemical shift being more sensitive and with a broader range). The data could be explained using a Langmuir-type approach. Gradual formation of a mixed ligand shell was observed, and the surface processes of catecholate adsorption and OA desorption were quantified. Contrary to the prevailing view, catecholate displaces only a minor fraction (∼20%) of the native OA ligand shell. At the same time, the total ligand density more than doubled from 2.3 nm-2 at native oleate coverage to 4.8 nm-2 at maximum catecholate loading. We conclude that the catecholate ligand adsorbs preferably to unoccupied Ti surface sites rather than replacing native OA ligands. This unexpected behavior, reminiscent of the Vroman effect for protein corona formation, appears to be a fundamental feature in the widely used surface modification of hydrophobic metal oxide NPs with catecholate ligands. Moreover, our findings show that ligand displacement on OA-capped TiO2 NPs is not suited for a full ligand shell refunctionalization because it produces only mixed ligand shells. Therefore, our results contribute to a better understanding and performance of photocatalytic applications based on catecholate ligand-sensitized TiO2 NPs.

Trapping Amorphous Intermediates of Carbonates - A Combined Total Scattering and NMR Study.

Crystallization via metastable phases plays an important role in chemical manufacturing, biomineralization, and protein crystallization, but the kinetic pathways leading from metastable phases to the stable crystalline modifications are not well understood. In particular, the fast crystallization of amorphous intermediates makes a detailed characterization challenging. To circumvent this problem, we devised a system that allows trapping and stabilizing the amorphous intermediates of representative carbonates (calcium, strontium, barium, manganese, and cadmium). The long-term stabilization of these transient species enabled a detailed investigation of their composition, structure, and morphology. Total scattering experiments with high-energy synchrotron radiation revealed a short-range order of several angstroms in all amorphous intermediates. From the synchrotron data, a structural model of amorphous calcium carbonate was derived that indicates a lower coordination number of calcium compared to the crystalline polymorphs. Our study shows that a multistep crystallization pathway via amorphous intermediates is open to many carbonates. We could isolate and characterize these transient species, thereby providing new insights into their crystallization mechanism.

Controlling the Morphology of Au-Pd Heterodimer Nanoparticles by Surface Ligands.

Controlling the morphology of noble-metal nanoparticles is mandatory to tune specific properties such as catalytic and optical behavior. Heterodimers consisting of two noble metals have been synthesized, so far mostly in aqueous media using selective surfactants or chemical etching strategies. We report a facile synthesis for Au@Pd and Pd@Au heterodimer nanoparticles (NPs) with morphologies ranging from segregated domains (heteroparticles) to core-shell structures by applying a seed-mediated growth process with Au and Pd seed nanoparticles in 1-octadecene (ODE), which is a high-boiling organic solvent. The as-synthesized oleylamine (OAm) functionalized Au NPs led to the formation of OAm-Au@Pd heteroparticles with a "windmill" morphology, having an Au core and Pd "blades". The multiply twinned structure of the Au seed particles (⌀ ≈ 9-11 nm) is associated with a reduced barrier for heterogeneous nucleation. This leads to island growth of bimetallic Au@Pd heteroparticles with less-regular morphologies. The reaction process can be controlled by tuning the surface chemistry with organic ligands. Functionalization of Au NPs (Ø ≈ 9-11 nm) with 1-octadecanethiol (ODT) led to the formation of ODT-Au@Pd NPs with a closed Pd shell through a strong ligand-metal binding, which is accompanied by a redistribution of the electron density. Experiments with varied Pd content revealed surface epitaxial growth of Pd on Au. For OAm-Pd and ODT-Pd seed particles, faceted, Au-rich domain NPs and impeded core-shell NPs were obtained, respectively. This is related to the high surface energy of the small Pd seed particles (⌀ ≈ 5-7 nm). The metal distribution of all bimetallic NPs was analyzed by extended (aberration-corrected) transmission electron microscopy (HR-TEM, HAADF-STEM, EDX mapping, ED). The Au and Pd NPs, as well as the ODT-Au@Pd and OAm-Pd@Au heteroparticles, catalyze the reduction of 4-nitrophenol to 4-aminophenol with borohydride. The catalytic activity is dictated by the particle structure. OAm-Au@Pd heteroparticles with faceted Au domains had the highest activity because of a mixed Au-Pd surface structure, while ODT-Au@Pd NPs, where the active Au core is covered by a Pd shell, had the lowest activity.

Calcium Sulfate Nanoparticles with Unusual Dispersibility in Organic Solvents for Transparent Film Processing.

Calcium sulfate is one of the most important construction materials. Today it is employed as high-performance compound in medical applications and cement mixtures. We report a synthesis for calcium sulfate nanoparticles with outstanding dispersibility properties in organic solvents without further functionalization. The nanoparticles (amorphous with small γ-anhydrite crystallites, 5-50 nm particle size) form long-term stable dispersions in acetone without any sign of precipitation. 1H NMR spectroscopic techniques and Fourier-transform infrared spectroscopy (FTIR) reveal absorbed 2-propanol on the particle surfaces that induce the unusual dispersibility. Adding water to the nanoparticle dispersion leads to immediate precipitation. A phase transformation to gypsum via bassanite was monitored by an in situ kinetic FT-IR spectroscopic study and transmission electron microscopy (TEM). The dispersibility in a volatile organic solvent and the crystallization upon contact with water open a broad field of applications for the CaSO4 nanoparticles, e.g., as nanogypsum for coatings or the fabrication of hybrid composites.

Screw- Type Motion and Its Impact on Cooperativity in BaNa2Fe[VO4]2.

BaNa2Fe[VO4]2 contains a Jahn-Teller active ion (FeII, 3d6, high-spin) in an octahedral coordination. On the basis of a combination of temperature-dependent X-ray diffraction and Mössbauer and Raman spectroscopies, we demonstrate the coupling of lattice dynamics with the electronic ground state of FeII. We identify three lattice modes combined to an effective canted screw- type motion that drives the structural transition around room temperature from the high-temperature ( P3̅) via intermediate phases to the low-temperature phase ( C2/ c). The dynamics of the electronic ground state of Fe(II) are evident from Mössbauer data with signatures of a motion-narrowed doublet above 320 K, a gradual evolution of the 5Eg electronic state below 293 K, and finally the signature of the thermodynamically preferred orbitally nondegenerate ground state (5Ag) of Fe(II) below 100 K. The continuous nature of the transition is associated with the temperature-dependent phonon parameters derived from Raman spectroscopy, which point out the presence of strong electron-phonon coupling in this compound. We present a microscopic mechanism and evaluate the collective component leading to the structural phase transition.

Particles of vaterite, a metastable CaCO3 polymorph, exhibit high biocompatibility for human osteoblasts and endothelial cells and may serve as a biomaterial for rapid bone regeneration.

We have previously described a promising alternative to conventional synthetic bone biomaterials using vaterite, a metastable CaCO3 polymorph that increases the local Ca2+ concentration in vitro and leads to an oversaturation of phosphate, the primary bone mineral. This stimulates a natural bone-like mineralisation in a short period of time. In this study, sterile and endotoxin-free vaterite particles were synthesised in a nearly quantitative yield. The 500-1,000 nm vaterite particles did not exhibit any cytotoxic effects as measured by MTS, lactate dehydrogenase, or crystal violet assays on the human osteoblast cell line (MG-63) exposed to concentrations up to 500 µg/ml vaterite up to 72 hr. MG-63, primary human osteoblasts or human umbilical vein endothelial cells in the presence of vaterite up to 500 µg/ml for 7 days exhibited typical growth patterns. Endothelial cells exhibited a normal induction of E-selectin after exposure to LPS and MG-63 cells in osteogenic differentiation medium showed an increased expression of alkaline phosphatase compared with the respective control cells without vaterite. MG-63 cultured on a vaterite-containing degradable poly(ethylene glycol)-hydrogel exhibited strong adhesion and proliferation, similar to cells on cell culture plates. Cells did not attach to gels without vaterite. Our results demonstrate that vaterite particles are biocompatible, do not influence cell gene expression, and that vaterite in hydrogels may be able to serve for adhesion of osteoblasts and as a mineral substrate for natural bone formation by osteoblasts. These characteristics make vaterite particles a highly favourable compound for use in bone regeneration applications.

Spark Plasma Sintering (SPS)-Assisted Synthesis and Thermoelectric Characterization of Magnéli Phase V6O11.

The Magnéli phase V6O11 was synthesized in gram amounts from a powder mixture of V6O11/V7O13 and vanadium metal, using the spark plasma sintering (SPS) technique. Its structure was determined with synchrotron X-ray powder diffraction data from a phase-pure sample synthesized by conventional solid-state synthesis. A special feature of Magnéli-type oxides is a combination of crystallographic shear and intrinsic disorder that leads to relatively low lattice thermal conductivities. SPS prepared V6O11 has a relatively low thermal conductivity of κ = 2.72 ± 0.06 W (m K)-1 while being a n-type conductor with an electrical conductivity of σ = 0.039 ± 0.005 (µΩ m)-1, a Seebeck coefficient of α = -(35 ± 2) µV K-1, which leads to a power factor of PF = 4.9 ± 0.8 × 10-5W (m K2)-1 at ∼600 K. Advances in the application of Magnéli phases are mostly hindered by synthetic and processing challenges, especially when metastable and nanostructured materials such as V6O11 are involved. This study gives insight into the complications of SPS-assisted synthesis of complex oxide materials, provides new information about the thermal and electrical properties of vanadium oxides at high temperatures, and supports the concept of reducing the thermal conductivity of materials with structural building blocks such as crystallographic shear (CS) planes.

Glycine-functionalized copper(ii) hydroxide nanoparticles with high intrinsic superoxide dismutase activity.

Superoxide dismutases (SOD) are a group of enzymes that catalyze the dismutation of superoxide (O2-) radicals into molecular oxygen (O2) and H2O2 as a first line of defense against oxidative stress. Here, we show that glycine-functionalized copper(ii) hydroxide nanoparticles (Gly-Cu(OH)2 NPs) are functional SOD mimics, whereas bulk Cu(OH)2 is insoluble in water and catalytically inactive. In contrast, Gly-Cu(OH)2 NPs form water-dispersible mesocrystals with a SOD-like activity that is larger than that of their natural CuZn enzyme counterpart. Based on this finding, we devised an application where Gly-Cu(OH)2 NPs were incorporated into cigarette filters. Cigarette smoke contains high concentrations of toxic reactive oxygen species (ROS, >1016 molecules per puff) including superoxide and reactive nitrogen species which lead to the development of chronic and degenerative diseases via oxidative damage and subsequent cell death. Embedded in cigarette filters Gly-Cu(OH)2 NPs efficiently removed ROS from smoke, thereby protecting lung cancer cell lines from cytotoxic effects. Their stability, ease of production and versatility make them a powerful tool for a wide range of applications in environmental chemistry, biotechnology and medicine.