RESUMEN
Non-interleaved chiral metasurfaces for high-spatial-resolution polarimetry are proposed and demonstrated. Furthermore, a convolutional neural network is incorporated to analyze interferometric images with the polarization state of light, and it results in accurate Stokes parameters.
RESUMEN
While phosphors play an immensely important role in solid-state lighting and full-colour displays, it has been noted lately that their performance can be largely improved via structural engineering. Here, phosphor material is synergistically merged with yet another structurally engineered platform, resonant cavity (RC). When a 40-nm-thick colloidal quantum dot (CQD) film is embedded in a tailored RC with a moderate cavity quality factor (Q ≈ 90), it gains the ability to absorb the majority (~87%) of excitation photons, resulting in significantly enhanced CQD fluorescence (~29×) across a reasonably broad linewidth (~13 nm). The colour gamut covered by red and green pixels implemented using the RC phosphor-along with a broad bandwidth (~20 nm) blue excitation source-exceeds that of the sRGB standard (~121%). The simple planar geometry facilitates design and implementation of the RC phosphor, making it promising for use in real applications.
RESUMEN
Measuring, recording and analyzing spectral information of materials as its unique finger print using a ubiquitous smartphone has been desired by scientists and consumers. We demonstrated it as drug classification by chemical components with smartphone Raman spectrometer. The Raman spectrometer is based on the CMOS image sensor of the smartphone with a periodic array of band pass filters, capturing 2D Raman spectral intensity map, newly defined as spectral barcode in this work. Here we show 11 major components of drugs are classified with high accuracy, 99.0%, with the aid of convolutional neural network (CNN). The beneficial of spectral barcodes is that even brand name of drug is distinguishable and major component of unknown drugs can be identified. Combining spectral barcode with information obtained by red, green and blue (RGB) imaging system or applying image recognition techniques, this inherent property based labeling system will facilitate fundamental research and business opportunities.
Asunto(s)
Espectrometría Raman , Comercio , Citoplasma , Dedos , Teléfono Inteligente , Espectrometría Raman/instrumentaciónRESUMEN
Photonic crystal (PhC) phosphor, in which the phosphor material is periodically modulated for an enhancement in color-conversion efficiency via resonant absorption of excitation photons, is a paradigm-shifting structural phosphor platform. Two-dimensional (2D) square-lattice PhC phosphor is currently considered the most advanced platform because of not only its high efficiency, but also its immunity to excitation polarization. In the present study, two major modifications are made to further improve the performance of the 2D PhC phosphor: increasing the refractive index contrast and planarizing the surface. The index contrast is improved by replacing the PhC backbone material with TiO2 whereas the surface planarization is achieved by removing excessive colloidal quantum dots from the surface. In comparison with the reference phosphor, the upgraded PhC phosphor exhibits ~59 times enhanced absorption (in simulations) and ~7 times enhanced emission (in experiments), both of which are unprecedentedly high. Our results not only brighten the viability and applicability of the PhC phosphor but also spur the phosphor development through structural engineering of phosphor materials.
RESUMEN
Using meta-imagers composed of a meta-lens and a complex-amplitude meta-modulator, all-optical convolutional processing that arbitrarily reshapes the point spread function of an optical system can now be implemented.
RESUMEN
We report a colloidal quantum dot (CQD) distributed feedback (DFB) laser structure containing a chirped grating. The device exhibits single-mode DFB lasing, of which the wavelength is spatially dispersed in a single chip. A period-chirped surface grating is fabricated using a modified Lloyd-type laser interference lithography setup, where a flat Lloyd's mirror is replaced with a concave one. A dense red-emitting CdSe/CdS/ZnS CQD film is prepared on a temporary substrate by spin-coating, which is subsequently released and wet-transferred onto a period-chirped quartz surface grating. Upon optical excitation, the fabricated DFB laser device lases in a single mode at a laser threshold of â¼400 µJ cm-2, with its lasing wavelength shifted linearly (in proportion to the grating pitch) along the chirp direction from 613.4 nm to 623.2 nm over a distance of â¼5.6 mm.
RESUMEN
The metal/graphene interface has been one of the most important research topics with regard to charge screening, charge transfer, contact resistance, and solar cells. Chemical bond formation of metal and graphene can be deduced from the defect induced D-band and its second-order mode, 2D band, measured by Raman spectroscopy, as a simple and nondestructive method. However, a phonon mode located at â¼1350 cm-1, which is normally known as the defect-induced D-band, is intriguing for graphene deposited with noble metals (Ag, Au, and Cu). We observe anomalous K-point phonons in nonreactive noble metal/graphene heterostructures. The intensity ratio of the midfrequency mode at â¼1350 cm-1 over G-band (â¼1590 cm-1) exhibits nonlinear but resonant behavior with the excitation laser wavelength, and more importantly, the phonon frequency-laser energy dispersion is â¼10-17 cm-1 eV-1, which is much less than the conventional range. These phonon modes of graphene at nonzero phonon wave vector (q ≠ 0) around K points are activated by localized surface plasmon resonance and not by the defects due to chemical bond formation of metal/graphene. This hypothesis is supported by density functional theory (DFT) calculations for noble metals and Cr along with the measured contact resistances.
RESUMEN
Coupled nanoantennas as metamaterial unit elements possess peculiar spectral and radiational behaviors. We show that nanoantennas made of two identical plasmonic slot resonators can greatly enhance the quality factors of resonance spectra and control radiation patterns through the selective excitation of bright and dark coupled modes. We confirm experimentally the enhanced quality factor of a bright mode in coupled nanoantennas. Adding phase modulators to the coupled microwave antennas, we demonstrate the "dark mode only" excitation of coupled microwave antennas with an incident plane wave. We also show that the bright-to-dark mode conversion and the related changes in radiation patterns can be controlled by the polarization of incident waves. In particular, we achieve leftward or rightward uni-directional radiation upon the injection of left or right circularly polarized waves.
RESUMEN
Misorientation-angle dependence on layer thickness is an intriguing feature of van der Waals materials, which causes stark optical gain and electrical transport modulation. However, the influence of misorientation angle on phase transformation is not determined yet. Herein, this phenomenon in a MoS2 multilayer via in situ electron-beam irradiation is reported. An AA'-stacked MoS2 bilayer undergoes structural transformation from the 2H semiconducting phase to the 1T' metallic phase, similar to a MoS2 monolayer, which is confirmed via in situ transmission electron microscopy. Moreover, non-AA' stacking, which has no local AA' stacking order in the Moiré pattern, does not reveal such a phase transformation. While a collective sliding motion of chalcogen atoms easily occurs during the transformation in AA' stacking, in non-AA' stacking it is suppressed by the weak van der Waals strength and by the chalcogen atoms interlocked at different orientations, which disfavor their kinetics by the increased entropy of mixing.
RESUMEN
Following the proof-of-concept experiment in the unit structure level, photonic crystal (PhC) phosphors-structurally engineered phosphor materials based on the nanophotonics principles-are integrated with a blue light-emitting diode (LED) chip to demonstrate a compact and efficient white light source. Red- or green-emitting CdSe-based colloidal quantum dots (CQDs) are coated on a Si3 N4 thin-film grating to fabricate PhC phosphors. The underlying PhC structure is designed such that the photonic band-edge modes at the zone center (kâ£â£ = 0) are tuned to the energy of the blue excitation photons. By progressively stacking the PhC phosphor plates on a blue LED chip, the blue, green, and red emission intensities can be tightly controlled to obtain white light with the desired properties. The chromaticity coordinates, (0.332, 0.341), and correlated color temperature, 5500 K, are obtained from a stack of 3 red and 11 green PhC phosphor plates; in contrast, a stack of 5 red and 16 green reference phosphor plates are required to generate a similar white light. Overall, the PhC phosphors produce 8% higher total emission intensity out of 33% less amount of CQDs than the reference phosphors.
RESUMEN
The ability of metasurfaces to manipulate light at the subwavelength scale offers unprecedented functionalities for passive and active lasing devices. However, applications of metasurfaces to optical devices are rare due to fabrication difficulties. Here, we present quantum dot light emitting diodes (QDLEDs) with a metasurface-integrated metal electrode and demonstrate microscopically controlled LED emission. By incorporating slot-groove antennas into the metal electrode, we show that LED emission from randomly polarized QD sources can be polarized and directed at will. Utilizing the relation between polarization and emission direction, we also demonstrate microscopic LED beam splitting through the selective choice of polarization.
RESUMEN
Phosphors, long-known color-converting photonic agents, are gaining increasing attention owing to the interest in white LEDs and related applications. Conventional material-based approaches to phosphors focus on obtaining the desired absorption/emission wavelengths and/or improving quantum efficiency. Here, we report a novel approach for enhancing the performance of phosphors: structural modification of phosphors. We incorporated inorganic colloidal quantum dots (CQDs) into a lateral one-dimensional (1D) photonic crystal (PhC) thin-film structure, with its photonic band-edge (PBE) modes matching the energy of 'excitation photons' (rather than 'emitted photons', as in most other PBE application devices). At resonance, we observed an approximately 4-fold enhancement of fluorescence over the reference bulk phosphor, which reflects an improved absorption of the excitation photons. This nano-structural engineering approach is a paradigm shift in the phosphor research area and may help to develop next-generation higher efficiency phosphors with novel characteristics.
RESUMEN
Despite the direct band gap of monolayer transition metal dichalcogenides (TMDs), their optical gain remains limited because of the poor light absorption in atomically thin, layered materials. Most approaches to improve the optical gain of TMDs mainly involve modulation of the active materials or multilayer stacking. Here, we report a method to enhance the optical absorption and emission in MoS2 simply through the design of a nanostructured substrate. The substrate consisted of a dielectric nanofilm spacer (TiO2) and metal film. The overall photoluminescence intensity from monolayer MoS2 on the nanostructured substrate was engineered based on the TiO2 thickness and amplified by Fabry-Perot interference. In addition, the neutral exciton emission was selectively amplified by plasmonic excitations from the local field originating from the surface roughness of the metal film with spacer thicknesses of less than 10 nm. We further demonstrate that the quality factor of the device can also be engineered by selecting a spacer material with a different refractive index.
RESUMEN
Although two-dimensional monolayer transition-metal dichalcogenides reveal numerous unique features that are inaccessible in bulk materials, their intrinsic properties are often obscured by environmental effects. Among them, work function, which is the energy required to extract an electron from a material to vacuum, is one critical parameter in electronic/optoelectronic devices. Here, we report a large work function modulation in MoS2 via ambient gases. The work function was measured by an in situ Kelvin probe technique and further confirmed by ultraviolet photoemission spectroscopy and theoretical calculations. A measured work function of 4.04 eV in vacuum was converted to 4.47 eV with O2 exposure, which is comparable with a large variation in graphene. The homojunction diode by partially passivating a transistor reveals an ideal junction with an ideality factor of almost one and perfect electrical reversibility. The estimated depletion width obtained from photocurrent mapping was â¼200 nm, which is much narrower than bulk semiconductors.
RESUMEN
We report the room-temperature lasing action from two-dimensional photonic crystal (PC) structures composed of a passive Si3N4 backbone with an over-coat of CdSe/CdS/ZnS colloidal quantum dots (CQDs) for optical gain. When optically excited, devices lased in dual PC band-edge modes, with the modal dominance governed by the thickness of the CQD over-layer. The demonstrated laser platform should have an impact on future photonic integrated circuits as the on-chip coupling between active and passive components is readily achievable.
RESUMEN
We present a Babinet-inverted optical nanoantenna integrated with a plasmonic waveguide. Using an integrated nanoantenna, we can couple the plasmon guide mode in a metal-insulator-metal (MIM) structure into the resonant antenna feed directly. The resonantly excited feed slot then radiates to free space and generates a magnetic dipole-like far-field pattern. The coupling efficiency of the integrated nanoantenna is calculated as being approximately 19% using a three-dimensional finite-difference time-domain (3D FDTD) simulation. By adding an auxiliary groove structure along with the feed, the radiation direction can be controlled similar to an optical Yagi-Uda antenna. We also determine, both theoretically and experimentally, that groove depth plays a significant role to function groove structure as a reflector or a director. The demonstrated Babinet-inverted optical nanoantenna integrated with a plasmonic waveguide can be used as a "plasmonic via" in plasmonic nanocircuits.
RESUMEN
We investigated systematic modulation of the Dirac point voltage of graphene transistors by changing the type of ionic liquid used as a main gate dielectric component. Ion gels were formed from ionic liquids and a non-triblock-copolymer-based binder involving UV irradiation. With a fixed cation (anion), the Dirac point voltage shifted to a higher voltage as the size of anion (cation) increased. Mechanisms for modulation of the Dirac point voltage of graphene transistors by designing ionic liquids were fully understood using molecular dynamics simulations, which excellently matched our experimental results. It was found that the ion sizes and molecular structures play an essential role in the modulation of the Dirac point voltage of the graphene. Through control of the position of their Dirac point voltages on the basis of our findings, complementary metal-oxide-semiconductor (CMOS)-like graphene-based inverters using two different ionic liquids worked perfectly even at a very low source voltage (V(DD) = 1 mV), which was not possible for previous works. These results can be broadly applied in the development of low-power-consumption, flexible/stretchable, CMOS-like graphene-based electronic devices in the future.
RESUMEN
Nanophotonics capable of directing radiation or enhancing quantum-emitter transition rates rely on plasmonic nanoantennas. We present here a novel Babinet-inverted magnetic-dipole-fed multislot optical Yagi-Uda antenna that exhibits highly unidirectional radiation to free space, achieved by engineering the relative phase of the interacting surface plasmon polaritons between the slot elements. The unique features of this nanoantenna can be harnessed for realizing energy transfer from one waveguide to another by working as a future "optical via".
RESUMEN
The patterning of colloidal quantum dots with nanometer resolution is essential for their application in photonics and plasmonics. Several patterning approaches, such as the use of polymer composites, molecular lock-and-key methods, inkjet printing and microcontact printing of quantum dots have been recently developed. Herein, we present a simple method of patterning colloidal quantum dots for photonic nanostructures such as straight lines, rings and dot patterns either on transparent or metallic substrates. Sub-10 nm width of the patterned line could be achieved with a well-defined sidewall profile. Using this method, we demonstrate a surface plasmon launcher from a quantum dot cluster in the visible spectrum.