Long-term stability of miniscrew anchored maxillary molar distalization in Class II treatment.

OBJECTIVE: To investigate treatment stability of miniscrew-anchored maxillary distalization in Class II malocclusion. MATERIALS AND METHODS: This retrospective study included a distalization (n = 19) and a control (n = 19) group; a patient group with minor corrections served the control. Lateral cephalograms of 38 adult patients were taken before (T0), immediately after (T1), and 3-4 years after (T2) treatment. Horizontal and vertical movement and tipping of the maxillary first molars (U6) and central incisors (U1) were measured along with skeletal craniofacial parameters at three time points to compare the two groups regarding the achieved treatment effects and their stability. RESULTS: Total arch distalization therapy led to 4.2 mm of distal movement of U6 without distal crown tipping (0.6° of axis change) and 3.3° of occlusal plane steepening. Over an average retention period of 42 months, maxillary total arch distalization provided high stability of treatment results, showing the same amount of mesial movement (0.7 mm) as the control group. CONCLUSIONS: In Class II treatment, miniscrew-anchored maxillary total arch distalization can provide stable distal movement of the maxillary first molars and central incisors.

Prediction of mandibular movement and its center of rotation for nonsurgical correction of anterior open bite via maxillary molar intrusion.

OBJECTIVES: To evaluate quantitatively the relationship between molar intrusion (change [Δ] maxillary first molar [U6]-palatal plane [PP]) and changes in vertical and sagittal cephalometric parameters and to determine the center of mandibular autorotation. MATERIALS AND METHODS: Twenty-one patients diagnosed with anterior open bite and successfully treated with molar intrusion (overbite [OB] > 0 mm) were retrospectively enrolled. Lateral cephalograms taken before and after molar intrusion were used to measure changes in vertical and sagittal cephalometric parameters. The center of mandibular autorotation was calculated by measuring displacement of gonion (Go) and pogonion (Pog). Paired t-tests were used to compare variables, and linear regression analysis was used to examine the relationship between ΔU6-PP and other variables. RESULTS: The mandible exhibited counterclockwise rotation after maxillary molar intrusion, which led to closure of anterior open bite. Strong linear relationships, in descending order, between ΔU6-PP and ΔOB, Δanterior facial height (AFH), Δvertical reference plane (Pog), and Δsella-nasion to Go-menton (SN-GoMe), were observed. When the maxillary molar was intruded 1 mm, OB increased by 2.6 mm, AFH decreased by 1.7 mm, Pog moved forward by 2.3 mm, and SN-GoMe decreased by 2°. The center of mandibular autorotation was located 7.4 mm behind and 16.9 mm below condylion after molar intrusion. CONCLUSIONS: The mandible exhibited counterclockwise rotation after maxillary molar intrusion; the center of mandibular autorotation was located behind and below condylion with individual variations.

Evaluation of the effects of miniscrew incorporation in palatal expanders for young adults using finite element analysis.

OBJECTIVE: The aim of this study was to evaluate the stress distribution and displacement of various craniofacial structures after nonsurgical rapid palatal expansion (RPE) with conventional (C-RPE), bone-borne (B-RPE), and miniscrew-assisted (MARPE) expanders for young adults using three-dimensional finite element analysis (3D FEA). METHODS: Conventional, bone-borne, and miniscrew-assisted palatal expanders were designed to simulate expansion in a 3D FE model created from a 20-year-old human dry skull. Stress distribution and the displacement pattern for each circumaxillary suture and anchor tooth were calculated. RESULTS: The results showed that C-RPE induced the greatest stress along the frontal process of the maxilla and around the anchor teeth, followed by the suture area, whereas B-RPE generated the greatest stress around the miniscrew, although the area was limited within the suture. Compared with the other appliances, MARPE caused relatively even stress distribution, decreased the stress on the buccal plate of the anchor teeth, and reduced tipping of the anchor teeth. CONCLUSIONS: The findings of this study suggest that the incorporation of miniscrews in RPE devices may contribute to force delivery to the sutures and a decrease in excessive stress on the buccal plate. Thus, MARPE may serve as an effective modality for the nonsurgical treatment of transverse maxillary deficiency in young adults.

Assessment of changes in the nasal airway after nonsurgical miniscrew-assisted rapid maxillary expansion in young adults.

OBJECTIVES: To evaluate changes in the volume and cross-sectional area of the nasal airway before and 1 year after nonsurgical miniscrew-assisted rapid maxillary expansion (MARME) in young adults. MATERIALS AND METHODS: Fourteen patients (mean age, 22.7 years; 10 women, four men) with a transverse discrepancy who underwent cone beam computed tomography before (T0), immediately after (T1), and 1 year after (T2) expansion were retrospectively included in this study. The volume of the nasal cavity and nasopharynx and the cross-sectional area of the anterior, middle, and posterior segments of the nasal airway were measured and compared among the three timepoints using paired t-tests. RESULTS: The volume of the nasal cavity showed a significant increase at T1 and T2 ( P < .05), while that of the nasopharynx increased only at T2 ( P < .05). The anterior and middle cross-sectional areas significantly increased at T1 and T2 ( P < .05), while the posterior cross-sectional area showed no significant change throughout the observation period ( P > .05). CONCLUSIONS: The results demonstrate that the volume and cross-sectional area of the nasal cavity increased after MARME and were maintained at 1 year after expansion. Therefore, MARME may be helpful in expanding the nasal airway.

Stability of dental, alveolar, and skeletal changes after miniscrew-assisted rapid palatal expansion.

OBJECTIVE: Miniscrew-assisted rapid palatal expansion (MARPE) is a means for expanding the basal bone without surgical intervention in young adults. Here, we assessed the differences in dental, alveolar, and skeletal measurements taken before (T0), immediately after (T1), and 1 year after (T2) MARPE. METHODS: Twenty-four patients (mean age, 21.6 years) who had undergone MARPE and cone-beam computed tomography at T0, T1, and T2 were included. Changes in the following parameters were compared using paired t-tests: intercusp, interapex, alveolar, nasal floor, and nasal cavity widths; inclination of the first molar (M1) and its alveolus; and thickness and height of the alveolar bone. A linear mixed-effects model was used to determine variables that affected periodontal changes in the M1. RESULTS: MARPE produced significant increases in most measurements during T0-T2, despite relapse of some measurements during T1-T2. The alveolar thickness decreased on the buccal side, but increased on the palatal side. The alveolar crest level at the first premolar moved apically. Changes in the thickness and height of the alveolar bone were affected by the corresponding initial values. CONCLUSIONS: MARPE can be used as an effective tool for correcting maxillomandibular transverse discrepancy, showing stable outcomes 1 year after expansion.

Accuracy of 3-Dimensional Virtual Surgical Simulation Combined With Digital Teeth Alignment: A Pilot Study.

PURPOSE: To evaluate the accuracy of virtual surgical simulation combined with digital teeth alignment and the applicability of this technique to the diagnosis and establishment of a 3-dimensional (3D) visualized treatment objective for orthognathic surgery by comparing virtual simulation images with actual post-treatment images. MATERIALS AND METHODS: This retrospective study included patients who underwent computed tomography (CT) before and after treatment. The 3D digital images were constructed from the initial CT images and dental cast scan data, and virtual surgical simulation combined with digital teeth alignment was performed. Accuracy of the virtual simulation was analyzed by comparing the distances of skeletal and dental landmarks in the horizontal, sagittal, and coronal reference planes with those on post-treatment images using the Wilcoxon signed rank test. Intraclass correlation coefficients were calculated to evaluate the degree of concordance between the 2 images. RESULTS: The study sample included 11 patients (mean age, 18.8 yr). Most landmarks had differences smaller than 2 mm in the 3 reference planes between virtual simulation and post-treatment images; these differences were not statistically significant (P > .05). Most skeletal landmarks, except the A point, B point, and gonion, showed normal to high concordance between the virtual simulation and post-treatment images in the 3 reference planes (P < .05); dental landmarks exhibited a broad range of concordance. CONCLUSION: The 3D virtual surgical simulation combined with digital teeth alignment using pretreatment CT images yielded results sufficiently accurate to be used for the diagnosis and establishment of visualized treatment objectives for orthognathic surgery.

Skeletal and dentoalveolar changes after miniscrew-assisted rapid palatal expansion in young adults: A cone-beam computed tomography study.

OBJECTIVE: The aim of this study was to evaluate the skeletal and dentoalveolar changes after miniscrew-assisted rapid palatal expansion (MARPE) in young adults by cone-beam computed tomography (CBCT). METHODS: This retrospective study included 14 patients (mean age, 20.1 years; range, 16-26 years) with maxillary transverse deficiency treated with MARPE. Skeletal and dentoalveolar changes were evaluated using CBCT images acquired before and after expansion. Statistical analyses were performed using paired t-test or Wilcoxon signed-rank test according to normality of the data. RESULTS: The midpalatal suture was separated, and the maxilla exhibited statistically significant lateral movement (p < 0.05) after MARPE. Some of the landmarks had shifted forwards or upwards by a clinically irrelevant distance of less than 1 mm. The amount of expansion decreased in the superior direction, with values of 5.5, 3.2, 2.0, and 0.8 mm at the crown, cementoenamel junction, maxillary basal bone, and zygomatic arch levels, respectively (p < 0.05). The buccal bone thickness and height of the alveolar crest had decreased by 0.6-1.1 mm and 1.7-2.2 mm, respectively, with the premolars and molars exhibiting buccal tipping of 1.1°-2.9°. CONCLUSIONS: Our results indicate that MARPE is an effective method for the correction of maxillary transverse deficiency without surgery in young adults.

Nonsurgical miniscrew-assisted rapid maxillary expansion results in acceptable stability in young adults.

OBJECTIVE: To evaluate the stability of nonsurgical miniscrew-assisted rapid maxillary expansion (MARME) in young adults with a transverse maxillary deficiency. MATERIALS AND METHODS: From a total of 69 adult patients who underwent MARME followed by orthodontic treatment with a straight-wire appliance, 20 patients (mean age, 20.9 ± 2.9 years) with follow-up records (mean, 30.2 ± 13.2 months) after debonding were selected. Posteroanterior cephalometric records and dental casts were obtained at the initial examination (T0), immediately after MARME removal (T1), immediately after debonding (T2), and at posttreatment follow-up (T3). RESULTS: Suture separation was observed in 86.96% of subjects (60/69). An increase in the maxillary width (J-J; 1.92 mm) accounted for 43.34% of the total expansion with regard to the intermolar width (IMW) increase (4.43 mm; P < .001) at T2. The amounts of J-J and IMW posttreatment changes were -0.07 mm (P > .05) and -0.42 mm (P  =  .01), respectively, during retention. The postexpansion change in middle alveolus width increased with age (P < .05). The postexpansion change of interpremolar width (IPMW) was positively correlated with the amount of IPMW expansion (P < .05) but not with IMW. The changes of the clinical crown heights in the maxillary canines, first premolars, and first molars were not significant at each time point. CONCLUSIONS: Nonsurgical MARME can be a clinically acceptable and stable treatment modality for young adults with a transverse maxillary deficiency.

Consecutive condylectomy and molar intrusion using temporary anchorage devices as an alternative for correcting facial asymmetry with condylar hyperplasia.

This case report demonstrates the successful treatment of facial asymmetry with condylar hyperplasia with limited surgical and orthodontic treatment. A high condylectomy was performed to shorten the elongated condyle and to remove its active growth site. The maxillary molars on the affected side were then orthodontically intruded using temporary anchorage devices to improve the occlusal cant and posterior open bite of the unaffected side. This combined surgical-orthodontic treatment provided a satisfactory outcome without additional orthognathic surgery.

Distalization pattern of whole maxillary dentition according to force application points.

OBJECTIVE: The purpose of this study was to observe stress distribution and displacement patterns of the entire maxillary arch with regard to distalizing force vectors applied from interdental miniscrews. METHODS: A standard three-dimensional finite element model was constructed to simulate the maxillary teeth, periodontal ligament, and alveolar process. The displacement of each tooth was calculated on x, y, and z axes, and the von Mises stress distribution was visualized using color-coded scales. RESULTS: A single distalizing force at the archwire level induced lingual inclination of the anterior segment, and slight intrusive distal tipping of the posterior segment. In contrast, force at the high level of the retraction hook resulted in lingual root movement of the anterior segment, and extrusive distal translation of the posterior segment. As the force application point was located posteriorly along the archwire, the likelihood of extrusive lingual inclination of the anterior segment increased, and the vertical component of the force led to intrusion and buccal tipping of the posterior segment. Rotation of the occlusal plane was dependent on the relationship between the line of force and the possible center of resistance of the entire arch. CONCLUSIONS: Displacement of the entire arch may be dictated by a direct relationship between the center of resistance of the whole arch and the line of action generated between the miniscrews and force application points at the archwire, which makes the total arch movement highly predictable.

Premaxillary Distraction Osteogenesis Using an Intraoral Appliance for Unilateral Cleft Lip and Palate: Case Report.

OBJECTIVE: Premaxillary distraction osteogenesis was introduced using intraoral devices to correct maxillary hypoplasia and lengthen the alveolar bone horizontally in a patient with unilateral cleft lip and palate. METHODS: For premaxillary distraction osteogenesis, Le Fort I osteotomy was performed. Vertical osteotomy lines were located distally of the upper right canine and left first premolar to separate the anterior segment of the maxilla. After a 7-day latency period, distraction was allowed to continue for 20 days at a rate of 0.5 mm/d, followed by a 3-month consolidation period. After consolidation, orthodontic treatment and bilateral intraoral vertical ramus osteotomy were performed for the mandibular setback. The implant and prosthodontic treatments were applied to the alveolar ridge area created by the distraction osteogenesis. RESULTS: The A-point moved 8.0 mm forward during the distraction osteogenesis period, and the recurrence rate was 25% after the retention period. The transverse dimension of the upper arch was expanded during orthodontic treatment. The quality of the alveolar bone created by distraction osteogenesis was acceptable for the prosthodontic implant. CONCLUSIONS: Premaxillary distraction osteogenesis and arch expansion is an effective treatment strategy, improving function, aesthetics, and stability for cleft patients with multiple missing teeth.

Mandibular posterior anatomic limit for molar distalization.

INTRODUCTION: The purpose of this study was to investigate the mandibular posterior anatomic limit for molar distalization. METHODS: Three-dimensional computed tomography scans were obtained on 34 adults with a skeletal Class I normodivergent facial profile and a normal occlusion. Posterior available space was measured at the crown and root levels along the posterior occlusal line connecting the buccal cusps of the first and second molars on the axial slices. It was also measured at the occlusal level on the lateral cephalograms derived from the computed tomography scans. The measurements on the cephalograms were used to predict the actual posterior available space determined by computed tomography and to determine the presence of root contact with the inner lingual cortex by linear regression and discriminant analyses, respectively. RESULTS: The posterior available space was significantly smaller at the root level than at the crown level. Root contact was observed in 35.3% of the 68 roots. The posterior available space measured on the lateral cephalograms resulted in a regression equation with a coefficient of determination of 0.261 to predict actual available space and correctly identified root contact in 66.2% of cases with a threshold value of 3.9 mm. CONCLUSIONS: The posterior anatomic limit appeared to be the lingual cortex of the mandibular body. Computed tomography scans are recommended for patients who require significant mandibular molar distalization.

Three-dimensional evaluation of maxillary anterior alveolar bone for optimal placement of miniscrew implants.

OBJECTIVE: This study aimed to propose clinical guidelines for placing miniscrew implants using the results obtained from 3-dimensional analysis of maxillary anterior interdental alveolar bone by cone-beam computed tomography (CBCT). METHODS: By using CBCT data from 52 adult patients (17 men and 35 women; mean age, 27.9 years), alveolar bone were measured in 3 regions: between the maxillary central incisors (U1-U1), between the maxillary central incisor and maxillary lateral incisor (U1-U2), and between the maxillary lateral incisor and the canine (U2-U3). Cortical bone thickness, labio-palatal thickness, and interdental root distance were measured at 4 mm, 6 mm, and 8 mm apical to the interdental cementoenamel junction (ICEJ). RESULTS: The cortical bone thickness significantly increased from the U1-U1 region to the U2-U3 region (p < 0.05). The labio-palatal thickness was significantly less in the U1-U1 region (p < 0.05), and the interdental root distance was significantly less in the U1-U2 region (p < 0.05). CONCLUSIONS: The results of this study suggest that the interdental root regions U2-U3 and U1-U1 are the best sites for placing miniscrew implants into maxillary anterior alveolar bone.

A comparison of tapered and cylindrical miniscrew stability.

OBJECTIVES: This study compared the stability of tapered miniscrews with cylindrical miniscrews. MATERIALS/METHODS: One hundred and five tapered and 122 cylindrical self-drilling miniscrews were placed into the maxillary and mandibular buccal alveolar areas of 132 patients (43 males and 89 females). The insertion torque and removal torque were measured and Periotest values (PTVs) were recorded at implantation. RESULTS: The success rates of the tapered and cylindrical miniscrews examined were similar. In the maxilla, the insertion torque of the tapered miniscrews (8.3 Ncm) was significantly higher than that of the cylindrical miniscrews (6.3 Ncm) (P < 0.05). The PTVs of the tapered miniscrews were statistically significantly lower in the maxilla (P < 0.05). The removal torque values showed no significant difference between the tapered and cylindrical miniscrews in the upper and lower buccal areas (P > 0.05). CONCLUSIONS: Tapered miniscrews had higher initial stability when compared to cylindrical miniscrews, whereas the clinical success rates and removal torques were similar between the two designs. The long-term stability is not directly affected by the miniscrew design.

Biologic stability of plasma ion-implanted miniscrews.

OBJECTIVE: To gain basic information regarding the biologic stability of plasma ion-implanted miniscrews and their potential clinical applications. METHODS: Sixteen plasma ion-implanted and 16 sandblasted and acid-etched (SLA) miniscrews were bilaterally inserted in the mandibles of 4 beagles (2 miniscrews of each type per quadrant). Then, 250 - 300 gm of force from Ni-Ti coil springs was applied for 2 different periods: 12 weeks on one side and 3 weeks contralaterally. Thereafter, the animals were sacrificed and mandibular specimens including the miniscrews were collected. The insertion torque and mobility were compared between the groups. The bone-implant contact and bone volume ratio were calculated within 800 µm of the miniscrews and compared between the loading periods. The number of osteoblasts was also quantified. The measurements were expressed as percentages and analyzed by independent t-tests (p < 0.05). RESULTS: No significant differences in any of the analyzed parameters were noted between the groups. CONCLUSIONS: The preliminary findings indicate that plasma ion-implanted miniscrews have similar biologic characteristics to SLA miniscrews in terms of insertion torque, mobility, bone-implant contact rate, and bone volume rate.

Influence of peri-implant artifacts on bone morphometric analysis with micro-computed tomography.

PURPOSE: To determine the optimal dilation pixel size distance from the mini-implant interface needed to compensate for the metal artifact on micro-computed tomography (micro-CT) for bone morphometric analysis. MATERIALS AND METHODS: A total of 72 self-drilling mini-implants were placed into the buccal alveolar bone of six male beagle dogs. After 12 weeks of orthodontic loading, specimens were harvested and scanned with micro-CT (Skyscan 1076) at a resolution of 9 µm. Using the reload plug-in and dilation procedure of CTAn, the percentage of bone-implant contact (BIC) and bone volume density (BV/TV, bone volume/total volume), respectively, were measured from one to seven pixels from the metal implant surface. Each pixel size of dilation (PSD) were compared with that of a ground histologic section, and the optimal PSD for bone morphometric analysis using micro-CT was determined. RESULTS: BIC values from micro-CT analysis decreased when the PSD increased (P < .05). BIC from micro-CT showed the highest correlation coefficient with BIC from histologic slides when the PSD was 5 to 7 (P < .05), whereas BV/TV from micro-CT showed a very high correlation with BV/TV from histologic slides in all ranges (P < .0001). CONCLUSION: To measure BIC and BV/TV using micro-CT, at least 5 PSD from the metal implant surface is needed.

Distalization pattern of the maxillary arch depending on the number of orthodontic miniscrews.

OBJECTIVE: To determine the effects of linear force vector(s) from interradicular miniscrews on the distalization pattern of the maxillary arch in adult Class II patients. MATERIALS AND METHODS: Twenty-five adult patients with mild to moderate Class II dentition and minimal crowding were collected. Either single (group A, n  =  12) or dual (group B, n  =  13) miniscrews were inserted on the posterior interradicular area to deliver a distalizing force to the main archwire. The displacement patterns of maxillary incisors and molars were measured and compared. RESULTS: Significant distalization in the molars and incisors was shown in both groups. Significantly greater distalization and intrusion of the first molar and intrusive displacement of the incisor, together with significant reduction of the mandibular plane, were noted in group B, in contrast to the rotation of the occlusal plane in group A. CONCLUSIONS: Interradicular miniscrews predictably induced total arch distalization, leading to the correction of Class II. Additional miniscrews in the premolar area appear to facilitate intrusion and distalization of the entire arch according to the position of the force vectors.

Evaluation of mandibular cortical bone thickness for placement of temporary anchorage devices (TADs).

OBJECTIVE: In this study, we measured the cortical bone thickness in the mandibular buccal and lingual areas using computed tomography in order to evaluate the suitability of these areas for application of temporary anchorage devices (TADs) and to suggest a clinical guide for TADs. METHODS: The buccal and lingual cortical bone thickness was measured in 15 men and 15 women. Bone thickness was measured 4 mm apical to the interdental cementoenamel junction between the mandibular canine and the 2nd molar using the transaxial slices in computed tomography images. RESULTS: The cortical bone in the mandibular buccal and lingual areas was thicker in men than in women. In men, the mandibular lingual cortical bone was thicker than the buccal cortical bone, except between the 1st and 2nd molars on both sides. In women, the mandibular lingual cortical bone was thicker in all regions when compared to the buccal cortical bone. The mandibular buccal cortical bone thickness increased from the canine to the molars. The mandibular lingual cortical bone was thickest between the 1st and 2nd premolars, followed by the areas between the canine and 1st premolar, between the 2nd premolar and 1st molar, and between the 1st molar and 2nd molar. CONCLUSIONS: There is sufficient cortical bone for TAD applications in the mandibular buccal and lingual areas. This provides the basis and guidelines for the clinical use of TADs in the mandibular buccal and lingual areas.

Changes in mechanical properties of seven light-cured composite resins after thermal cycling.

OBJECTIVE: To examine the changes of the mechanical properties of 7 different light-cured composite resins after thermal cycling and the correlations between these properties. METHODS: Seven different light-cured composite resins, including 2 microfilled composites (A110:AH and ESTELITE :ET), 3 microhybrid composites (AELITE:AT, Z250:ZS, and CharmFil plus:CP), and 2 nanohybrid composites (Z350:ZH and Grandio:GD), were prepared into test specimens with a diameter of 12 mm and a thickness of 1.0 mm. The specimens were stored in distilled water at 37 degrees celsius; for 24 h prior to 1 000 thermal cycles of 5 degrees celsius; for 15 s and 55 degrees celsius; for 15 s. The biaxial flexural strength (δ(f)) was tested using the ball-on-three-ball method at a crosshead speed of 0.5 mm/min (ISO4049). The fracture surface was observed under scanning electron microscope (SEM), and the remaining specimens underwent Knoop hardness test with a 50-g loading for 10 s. RESULTS: The highest and lowest Weibull modulus was observed in AH (18.752) and AT (5.290) group, respectively. The highest and lowest biaxial flexural strength was observed in ZS (158.2 MPa) and ET (54.0 MPa) groups, respectively. The δ(f) of the tested materials decreased in the order of microhybrid composite, nanohybrid composite, and microfiller composite, and the δ(f) showed no significant difference between the composites with a similar filler (P>0.05). The fracture number was positively correlated to the strength of the material. The Knoop hardness numbers (H) was the highest in GD group (110.81∓14.77 kg/mm(2)) and the lowest in AH group (42.81∓1.91 kg/mm(2)). SEM showed that the interface region of the matrix and the filler was vulnerable to crack formation. CONCLUSION: The nanohybrid composite resins better suit clinical applications than microhybrid composites. The applicability of Knoop hardness test in hardness measurement of the composite resins needs to be further demonstrated.

Displacement pattern of the maxillary arch depending on miniscrew position in sliding mechanics.

INTRODUCTION: This clinical study was performed to evaluate the anteroposterior and vertical displacement patterns of the maxillary teeth in sliding mechanics depending on the position of interradicular miniscrews after the extraction of premolars. METHODS: Thirty-six women requiring maximum incisor retraction because of bialveolar protrusion were divided into 2 groups: group A (n = 18), miniscrew between the premolar and the molar, and group B (n = 18), miniscrew between the premolars. Cephalometric measurements for skeletal and dental changes were made before and after space closure. RESULTS: In both groups, significant incisor retraction with intrusion of the root apex was noted, with no significant change in the first molar position. Group B displayed significantly greater intrusion at both the incisal tip (1.59 ± 1.53 mm) and the root apex (2.89 ± 1.59 mm) than did group A. In spite of the mean reduction of the vertical skeletal measurements, we failed to find significant skeletal changes. CONCLUSIONS: Miniscrews provided firm anchorage for anterior retraction. Selection of the placement site appeared to be an important determinant for the resultant displacement pattern of the incisor segment. Discriminative intrusion or retraction might be obtained via strategic miniscrew positioning.