Evaluation of the efficiency of thermostable L-asparaginase from B. licheniformis UDS-5 for acrylamide mitigation during preparation of French fries.

A thermostable L-asparaginase was produced from Bacillus licheniformis UDS-5 (GenBank accession number, OP117154). The production conditions were optimized by the Plackett Burman method, followed by the Box Behnken method, where the enzyme production was enhanced up to fourfold. It secreted L-asparaginase optimally in the medium, pH 7, containing 0.5% (w/v) peptone, 1% (w/v) sodium chloride, 0.15% (w/v) beef extract, 0.15% (w/v) yeast extract, 3% (w/v) L-asparagine at 50 °C for 96 h. The enzyme, with a molecular weight of 85 kDa, was purified by ion exchange chromatography and size exclusion chromatography with better purification fold and percent yield. It displayed optimal catalysis at 70 °C in 20 mM Tris-Cl buffer, pH 8. The purified enzyme also exhibited significant salt tolerance too, making it a suitable candidate for the food application. The L-asparaginase was employed at different doses to evaluate its ability to mitigate acrylamide, while preparing French fries without any prior treatment. The salient attributes of B. licheniformis UDS-5 L-asparaginase, such as greater thermal stability, salt stability and acrylamide reduction in starchy foods, highlights its possible application in the food industry.

Organophosphate pesticides an emerging environmental contaminant: Pollution, toxicity, bioremediation progress, and remaining challenges.

Organophosphates (OPs) are an integral part of modern agriculture; however, due to overexploitation, OPs pesticides residues are leaching and accumulating in the soil, and groundwater contaminated terrestrial and aquatic food webs. Acute exposure to OPs could produce toxicity in insects, plants, animals, and humans. OPs are known for covalent inhibition of acetylcholinesterase enzyme in pests and terrestrial/aquatic organisms, leading to nervous, respiratory, reproductive, and hepatic abnormalities. OPs pesticides also disrupt the growth-promoting machinery in plants by inhibiting key enzymes, permeability, and trans-cuticular diffusion, which is crucial for plant growth. Excessive use of OPs, directly/indirectly affecting human/environmental health, raise a thoughtful global concern. Developing a safe, reliable, economical, and eco-friendly methods for removing OPs pesticides from the environment is thus necessary. Bioremediation techniques coupled with microbes or microbial-biocatalysts are emerging as promising antidotes for OPs pesticides. Here, we comprehensively review the current scenario of OPs pollution, their toxicity (at a molecular level), and the recent advancements in biotechnology (modified biocatalytic systems) for detection, decontamination, and bioremediation of OP-pesticides in polluted environments. Furthermore, the review focuses on onsite applications of OPs degrading enzymes (immobilizations/biosensors/others), and it also highlights remaining challenges with future approaches.

Bio-catalytic system of metallohydrolases for remediation of neurotoxin organophosphates and applications with a future vision.

Organophosphates (OPs) compounds are universally used as pesticides and maintained as chemical warfare agents by many nations across the globe. These OPs compounds due to their molecular structure are highly persistent in nature, contaminating soil and water equally, thereby adversely affecting terrestrial and aquatic life, and contributing to millions of poisoning cases every year worldwide. Therefore, there are urgent requirements for safe and rapid method for environmental restoration and therapeutic detoxications. Organophosphate hydrolyzing enzymes are emerging as an attractive candidate for the degradation of OPs compounds. The biologically driven approach is safe, rapid, and environment-friendly. As genetically modified microbes are not in practice worldwide, scientists are exploring different bioremediation approaches that mainly focus on cell-free biocatalytic systems. In this review, we have discussed the prevalence of OPs hydrolyzing enzymatic systems and the recent advancement of enzyme engineering in enhancing the catalytic activity, substrate specificity, and half-life. It highlights the application in OPs detection, decontamination (environmental bioremediation), and therapeutic detoxification using approaches like immobilization. We have also described the remaining challenges and future prospects.

A novel organophosphate hydrolase from Arthrobacter sp. HM01: Characterization and applications.

Bioremediation systems coupled to efficient microbial enzymes have emerged as an attractive approach for the in-situ removal of hazardous organophosphates (OPs) pesticides from the polluted environment. However, the role of engineered enzymes in OPs-degradation is rarely studied. In this study, the potential OPs-hydrolase (opdH) gene (Arthrobacter sp. HM01) was isolated, cloned, expressed, and purified. The recombinant organophosphate hydrolase (ropdH) was âˆ¼29 kDa; which catalyzed a broad-range of OPs-pesticides in organic-solvent (∼99 % in 30 min), and was found to increase the catalytic efficiency by 10-folds over the native enzyme (kcat/Km: 107 M-1s-1). The degraded metabolites were analyzed using HPLC/GCMS. Through site-directed mutagenesis, it was confirmed that, conserved metal-bridged residue (Lys-127), plays a crucial role in OPs-degradation, which shows âˆ¼18-folds decline in OPs-degradation. Furthermore, the catalytic activity and its stability has been enhanced by >2.0-fold through biochemical optimization. Thus, the study suggests that ropdH has all the required properties for OPs bioremediation.

Improved live-cell PCR method for detection of organophosphates degrading opd genes and applications.

Organophosphates are becoming an emerging pollutant due to their various applications, particularly as pesticides. In this study, an improved Colony (Live-cell) PCR method was developed for the detection of opd genes from bacteria encoding the organophosphate hydrolase enzymes capable of degrading various organophosphates. The improved method does not require pre-heating or pre-lysis of bacterial cells as essential in the conventional colony PCR. The reaction volume was scaled down to 10 µl by optimizing the PCR buffer and amplification conditions. The improved method was used for Gram positive and negative bacteria, glycerol stocks, liquid cultures, recombinant and mutant strains. Also, 16S rRNA gene was amplified from unknown environmental isolates and known E. coli strains. The amplified opd and 16S rRNA genes from the improved colony PCR method and by conventional PCR were sequenced, and similar results were obtained from both techniques. Thus, the improved method can be further explored in molecular biology or during biomarker studies. KEY POINTS: • Improved colony PCR method was developed for screening of opd genes from bacteria. • Method was validated for Gram positive/negative bacteria from solid as well as liquid media. • The improved method was rapid, efficient, and can be applied under various conditions.

Linkers: A synergistic way for the synthesis of chimeric proteins.

In the cell, the protein domains are attached with the short oligopeptide, commonly known as linker peptide. Besides bridging, the linker assists in the domain-domain interaction and protein folding into the peculiar conformations. Linkers allow or control the movement of protein domains in the dynamic cellular environment. The recent advances in the recombinant DNA technology enable the construction of multiple gene constructs in an open reading frame. The express sequences can work in a cascade to cater for myriad functions. This trend has given momentum to incorporating bridge sequences (linker) that essentially separates the independent domains. According to the cellular need, the bridging partner can be spaced at a secure gap or requires attaching or interacting physically. The flexible or rigid linker can help to achieve such conformations in chimeric fusion proteins. The linker can improve solubility, proteolytic resistance and stability of such fusion proteins. Recently, linker aided protein switches and antibody-drug conjugates are gaining the attention of researchers worldwide. Here, we thoroughly reviewed the types of the linker, strategies for linker engineering and the composition of a linker.

Degradation insight of organophosphate pesticide chlorpyrifos through novel intermediate 2,6-dihydroxypyridine by Arthrobacter sp. HM01.

Organophosphates (OPs) are hazardous pesticides, but an indispensable part of modern agriculture; collaterally contaminating agricultural soil and surrounding water. They have raised serious food safety and environmental toxicity that adversely affect the terrestrial and aquatic ecosystems and therefore, it become essential to develop a rapid bioremediation technique for restoring the pristine environment. A newly OPs degrading Arthrobacter sp. HM01 was isolated from pesticide-contaminated soil and identified by a ribotyping (16S rRNA) method. Genus Arthrobacter has not been previously reported in chlorpyrifos (CP) degradation, which shows 99% CP (100 mg L-1) degradation within 10 h in mMSM medium and also shows tolerance to a high concentration (1000 mg L-1) of CP. HM01 utilized a broad range of OPs pesticides and other aromatic pollutants including intermediates of CP degradation as sole carbon sources. The maximum CP degradation was obtained at pH 7 and 32 °C. During the degradation, a newly identified intermediate 2,6-dihydroxypyridine was detected through TLC/HPLC/LCMS analysis and a putative pathway was proposed for its degradation. The study also revealed that the organophosphate hydrolase (opdH) gene was responsible for CP degradation, and the opdH-enzyme was located intracellularly. The opdH enzyme was characterized from cell free extract for its optimum pH and temperature requirement, which was 7.0 and 50 °C, respectively. Thus, the results revealed the true potential of HM01 for OPs-bioremediation. Moreover, the strain HM01 showed the fastest rate of CP degradation, among the reported Arthrobacter sp.

Immobilization of Agrobacterium tumefaciensd-psicose 3-epimerase onto titanium dioxide for bioconversion of rare sugar.

d-Psicose (d-ribo-2-hexulose or d-allulose) is the Carbon-3 epimer of d-fructose sugar and considered as an unnatural (rare) sugar found in low amount in nature. It has about 70% of the relative sweetness but 0.3% of the energy of sucrose, which is suggested as the most suitable sucrose substitute for food additives. Enzymatic biosynthesis using ketose 3-epimerases is a necessary procedure for the production of d-Psicose from d-fructose. However, significant drawbacks in the application of ketose 3-epimerases at industrial scale observe lower thermal stability as well as bioconversion efficiency, reusability and recovery of the enzyme. We have attempted immobilization of ketose 3-epimerases from Agrobacterium tumefaciens (agtu) d-psicose 3-epimerase (DPEase) on titanium dioxide. Further, Scanning electron microscopy (SEM), inverted microscopy, Fourier transform infrared spectroscopy (FTIR) and UV-vis spectroscopy showed that the enzyme was successfully immobilized on the titanium dioxide (TiO2) surface. Titanium dioxide immobilized agtu-DPEase (TiO2-agtu-DPEase) shows pH optima at 6.0 and 60 °C as a higher working temperature. TiO2-agtu-DPEase showed a half-life of 180 min at 60 °C, which is higher as compared to Agrobacterium tumefaciens (agtu) DPEase (3.99 min at 50 °C). At equilibrium, 36:64 (D-psicose: d-fructose), the bioconversion efficiency was accounted for titanium dioxide immobilized DPEase, which is higher than the agtu-DPEase. Titanium dioxide immobilized DPEase showed bioconversion efficiency up to 9 cycles of reusability.

Characterization of P. aeruginosa Glucose 6- Phosphate Isomerase: A Functional Insight via In-Vitro Activity Study.

BACKGROUND: Glucose-6-phosphate isomerase (G6PI) catalyses the second step in glycolysis in the reversible interconversion of an aldohexose glucose 6-phosphate, a six membered ring moiety to a ketohexose, fructose 6-phosphate five membered ring moiety. This enzyme is of utmost importance due to its multifunctional role like neuroleukin, autocrine motility factor, etc. in various species. G6PI from Pseudomonas aeruginosa is less explored for its moonlighting properties. These properties can be predicted by studying the active site conservation of residues and their interaction with the specific ligand. METHODS: Here, we study the G6PI in a self-inducible construct in bacterial expression system with its purification using Ni-NTA chromatography. The secondary structure of pure G6PI is estimated using circular dichroism to further predict the proper folding form of the protein. The bioactivity of the purified enzyme is quantified using phosphoglucose isomerase colorimetric kit with a value of 12.5 mU/mL. Differential scanning fluorimetry and isothermal titration calorimetry were employed to monitor the interaction of G6PI with its competitive inhibitor, erythrose 4-phosphate and calculated the Tm, Kd and IC50 values. Further, the homology model for the protein was prepared to study the interaction with the erythrose 4-phosphate. MD simulation of the complex was performed at 100 ns to identify the binding interactions. RESULTS: We identified hydrogen bonds and water bridges dominating the interactions in the active site holding the protein and ligand with strong affinity. CONCLUSION: G6PI was successfully crystallized and data has been collected at 6Å. We are focused on improving the crystal quality for obtaining higher resolution data.

Exploiting the potential of metal and solvent tolerant laccase from Tricholoma giganteum AGDR1 for the removal of pesticides.

Laccase from previously reported hardwood degrading fungus, Tricholoma giganteum AGDR1, was isolated, identified at molecular level, biochemically characterized and also utilized for pesticide degradation. Laccase gene is comprised of 3752 bp, which encompassed 742-bp of 5' flanking upstream sequence with 12 introns and 12 exons. Mature enzyme possesses 391 amino acids and signal peptide, which is determined to be monomeric protein with an apparent molecular weight of 41 kDa and 6.45 pI. Higher optimal activities were observed at 45 °C and pH 3.0 and surprisingly, it exhibited more than 20% of relative activity at pH 1.5. Purified laccase was tolerant to 100 mM of metals (i.e. Se, Pb, Cu, Cr and Cd), organic solvents (ethyl acetate, methanol, ethanol and acetone) and potent inhibitors (hydroxylamine, thiourea, NaF and Na-azide) as compared to reported laccases. It was able to degrade 29%, 7% and 72% of chlorpyrifos, profenofos and thiophanate methyl within 15 h, respectively. Molecular docking analysis revealed that higher binding efficacy of these pesticides is observed with H83, H320, A95, V384, and P366 which are presented near to the catalytic site. Based on the results, T. giganteum AGDR1 laccase can be applied for the potential remediation and industrial applications under harsh conditions.

Molecular and biochemical characterization of a thermostable keratinase from Bacillus altitudinis RBDV1.

A thermostable keratinase designated as KBALT was purified from Bacillus altitudinis RBDV1 from a poultry farm in Gujarat, India. The molecular weight of the native KBALT (nKBALT) purified using ammonium sulfate and ion exchange and gel permeation chromatography with a 40% yield and 80-fold purification was estimated to be ~ 43 kDa. The gene for KBALT was successfully cloned, sequenced and expressed in Escherichia coli. Recombinant KBALT (rKBALT) when purified using a single step Ni-NTA His affinity chromatography achieved a yield of 38.20% and a 76.4-fold purification. Comparison of the deduced amino acid sequence of rKBALT with known proteases of Bacillus species and inhibitory effect of PMSF suggest that rKBALT was a subtilisin-like serine protease. Both native and rKBALT exhibited higher activity at 85 °C and pH 8.0 in the presence of Mg2+, Mn2+, Zn2+, Ba2+ and Fe3+ metal ions. Interestingly, 70% of their activity was retained at temperatures ranging from 35 to > 95 °C. The keratinolytic activity of both nKBALT and rKBALT was enhanced in the presence of reducing agents. They exhibited broad substrate specificity towards various protein substrates. KBALT was determined for its kinetic properties by calculating its Km (0.61 mg/ml) and Vmax (1673 U/mg/min) values. These results suggest KBALT as a robust and promising contender for enzymatic processing of keratinous wastes in waste processing plants.

Effects of substrate binding site residue substitutions of xynA from Bacillus amyloliquefaciens on substrate specificity.

BACKGROUND: The aromatic residues of xylanase enzyme, W187, Y124, W144, Y128 and W63 of substrate binding pocket from Bacillus amyloliquefaciens were investigated for their role in substrate binding by homology modelling and sequence analysis. These residues are highly conserved and play an important role in substrate binding through steric hindrance. The substitution of these residues with alanine allows the enzyme to accommodate nonspecific substrates. RESULTS: Wild type and mutated genes were cloned and overexpressed in BL21. Optimum pH and temperature of rBAxn exhibited pH 9.0 and 50 °C respectively and it was stable up to 215 h. Along with the physical properties of rBAxn, kinetic parameters (Km 19.34 ± 0.72 mg/ml; kcat 6449.12 ± 155.37 min- 1 and kcat/Km 333.83 ± 6.78 ml min- 1 mg- 1) were also compared with engineered enzymes. Out of five mutations, W63A, Y128A and W144A lost almost 90% activity and Y124A and W187A retained almost 40-45% xylanase activity. CONCLUSIONS: The site-specific single mutation, led to alteration in substrate specificity from xylan to CMC while in case of double mutant the substrate specificity was altered from xylan to CMC, FP and avicel, indicating the role of aromatic residues on substrate binding, catalytic process and overall catalytic efficiency.

Immobilization on graphene oxide improves the thermal stability and bioconversion efficiency of D-psicose 3-epimerase for rare sugar production.

D-Psicose (D-ribo-2-hexulose or D-allulose), an epimer of D-fructose is considered as a rare low-calorie sugar displaying important physiological functions. Enzymatic production using ketose 3-epimerases is the feasible process for the production of D-Psicose. However, major drawbacks in application of ketose 3-epimerases are bioconversion efficiency and reusability of the enzyme. We have attempted immobilization of ketose 3-epimerases from Agrobacterium tumefaciens (agtu) D-psicose 3-epimerase (DPEase) on graphene oxide. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and Thermo gravimetric analysis (TGA) showed that the enzyme was successfully immobilized on the graphene oxide. Graphene oxide immobilized agtu-DPEase (GO-agtu-DPEase) shows pH optima at 7.5 and 60°C as higher working temperature. Significant improvement in thermal stability was observed which showed half-life of 720min at 60°C whereas Agrobacterium tumefaciens (agtu) DPEase displayed 3.99min. At equilibrium, 40:60 (D-psicose: D-fructose) the bioconversion efficiency was accounted for Graphene oxide immobilized DPEase which is higher than the agtu-DPEase. Graphene oxide immobilized DPEase showed bioconversion efficiency up to 10 cycles of reusability.

Bioproduction of L-Aspartic Acid and Cinnamic Acid by L-Aspartate Ammonia Lyase from Pseudomonas aeruginosa PAO1.

Aspartase (L-aspartate ammonia lyase, EC 4.3.1.1) catalyses the reversible amination and deamination of L-aspartic acid to fumaric acid which can be used to produce important biochemical. In this study, we have explored the characteristics of aspartase from Pseudomonas aeruginosa PAO1 (PA-AspA). To overproduce PA-AspA, the 1425-bp gene was introduced in Escherichia coli BL21 and purified. A 51.0-kDa protein was observed as a homogenous purified protein on SDS-PAGE. The enzyme was optimally active at pH 8.0 and 35 °C. PA-AspA has retained 56% activity after 7 days of incubation at 35 °C, which displays the hyperthermostablility characteristics of the enzyme. PA-AspA is activated in the presence of metal ions and Mg2+ is found to be most effective. Among the substrates tested for specificity of PA-AspA, L-phenylalanine (38.35 ± 2.68) showed the highest specific activity followed by L-aspartic acid (31.21 ± 3.31) and fumarate (5.42 ± 2.94). K m values for L-phenylalanine, L-aspartic acid and fumarate were 1.71 mM, 0.346 µM and 2 M, respectively. The catalytic efficiency (k cat/K m) for L-aspartic acid (14.18 s-1 mM-1) was higher than that for L-phenylalanine (4.65 s-1 mM-1). For bioconversion, from an initial concentration of 1000 mM of fumarate and 30 mM of L-phenylalanine, PA-AspA was found to convert 395.31 µM L-aspartic acid and 3.47 mM cinnamic acid, respectively.

A single and two step isomerization process for d-tagatose and l-ribose bioproduction using l-arabinose isomerase and d-lyxose isomerase.

l-ribose and d-tagatose are biochemically synthesized using sugar isomerases. The l-arabinose isomerase gene from Shigella flexneri (Sf-AI) was cloned and expressed in Escherichia coli BL-21. Sf-AI was applied for the bioproduction of d-tagatose from d-galactose. l-ribose synthesis was performed by two step isomerization using Sf-AI and d-lyxose/ribose isomerase from Cohnella laevoribosii. The overall 22.3% and 25% conversion rate were observed for d-tagatose and l-ribose production from d-galactose and l-arabinose respectively. In the present manuscript, synthesis of rare sugars from naturally available sugars is discussed along with the biochemical characterization of Sf-AI and its efficiency.

Enhanced catalysis of L-asparaginase from Bacillus licheniformis by a rational redesign.

L-Asparaginase (3.5.1.1) being antineoplastic in nature are used in the treatment of acute lymphoblastic leukemia (ALL). However glutaminase activity is the cause of various side effects when used as a drug against acute lymphoblastic leukemia (ALL). Therefore, there is a need of a novel L-asparaginase (L-ASNase) with low or no glutaminase activity. Such a property has been observed with L-ASNase from B. licheniformis (BliA). The enzyme being glutaminase free in nature paved the way for its improvement to achieve properties similar to or near to the commercially available L-ASNases. Rational enzyme engineering approach resulted in four mutants: G238N, E232A, D103V and Q112H. Among these the mutant enzyme, D103V, had a specific activity of 597.7IU/mg, which is higher than native (rBliA) (407.65IU/mg). Moreover, when the optimum temperature and in vitro half life were studied and compared with native BliA, D103V mutant BliA was better, showing tolerance to higher temperatures and a 3 fold higher half life. Kinetic studies revealed that the mutant D103V L-ASNase has increased substrate affinity, with Km value of 0.42mM and Vmax of 2778.9µmolmin(-1).

Bioproduction of D-Tagatose from D-Galactose Using Phosphoglucose Isomerase from Pseudomonas aeruginosa PAO1.

Pseudomonas aeruginosa PAO1 phosphoglucose isomerase was purified as an active soluble form by a single-step purification using Ni-NTA chromatography that showed homogeneity on SDS-PAGE with molecular mass ∼62 kDa. The optimum temperature and pH for the maximum isomerization activity with D-galactose were 60 °C and 7.0, respectively. Generally, sugar phosphate isomerases show metal-independent activity but PA-PGI exhibited metal-dependent isomerization activity with aldosugars and optimally catalyzed the D-galactose isomerization in the presence of 1.0 mM MnCl2. The apparent Km and Vmax for D-galactose under standardized conditions were calculated to be 1029 mM (±31.30 with S.E.) and 5.95 U/mg (±0.9 with S.E.), respectively. Equilibrium reached after 180 min with production of 567.51 µM D-tagatose from 1000 mM of D-galactose. Though, the bioconversion ratio is low but it can be increased by immobilization and enzyme engineering. Although various L-arabinose isomerases have been characterized for bioproduction of D-tagatose, P. aeruginosa glucose phosphate isomerase is distinguished from the other L-arabinose isomerases by its optimal temperature (60 °C) for D-tagatose production being mesophilic bacteria, making it an alternate choice for bulk production.

Zn tolerance of novel Colocasia esculenta metallothionein and its domains in Escherichia coli and tobacco.

Contrary to extensive researches on the roles of metallothioneins (MTs) in metal tolerance of animals, the roles of plant MTs in metal tolerance are largely under investigation. In this study, we evaluated the functional role of type 2 MT from Colocasia esculenta (CeMT2b) in Zn tolerance of tobacco and E. coli cells. Under Zn-stress conditions, transgenic tobacco overexpressing CeMT2b displayed much better seedling growth, a significant decrease in the levels of H(2)O(2) and an increase in Zn accumulation compared with the wild type. Overexpression of CeMT2b in E. coli greatly enhanced Zn tolerance and Zn accumulation under Zn stresses compared with control cells. CeMT2b bound 5.38 ± 0.29 atoms of Zn per protein. To identify a structural domain of CeMT2b for Zn binding, we investigated the growth of E. coli expressing each of the N-terminal, C-terminal, and central linker domains or a CNC motif deletion from the C-terminus of full-length CeMT2b. The results showed that the CNC motif is required for Zn tolerance, and the N-terminal domain is more effective in Zn tolerance than the C-terminal domain. Taken together, our results provide direct evidence for functional contributions of CeMT2b in Zn tolerance of tobacco and E. coli cells.

Engineering of the catalytic site of xylose isomerase to enhance bioconversion of a non-preferential substrate.

Mutation in active site would either completely eliminate enzyme activity or may result in an active site with altered substrate-binding properties. The enzyme xylose isomerase (XI) is sterospecific for the α-pyranose and α-fructofuranose anomers and metal ions (M1 and M2) play a pivotal role in the catalytic action of this enzyme. Mutations were created at the M2 site of XI of Thermus thermophilus by replacing D254 and D256 with arginine. Mutants D254R and a double mutant (D254R/D256R) showed complete loss of activity while D256R showed an increase in the specificity on D-lyxose, L-arabinose and D-mannose which are non-preferential substrates for XI. Both wild type (WT) and D256R showed higher activity at pH 7.0 and 85°C with an increase in metal requirement. The catalytic efficiency Kcat/Km (S(-1) mM(-1)) of D256R for D-lyxose, L-arabinose and D-mannose were 0.17, 0.09 and 0.15 which are higher than WT XI of T.thermophilus. The altered catalytic activity for D256R could be explained by the possible role of arginine in catalytic reaction or the changes in a substrate orientation site. However, both the theories are only assumptions and have to be addressed with crystal study of D256R.

Characteristics of bifunctional acidic endoglucanase (Cel5B) from Gloeophyllum trabeum.

The endoglucanase (Cel5B) from the filamentous fungus Gloeophyllum trabeum was cloned and expressed without a signal peptide, and alanine residue 22 converted to glutamine in Pichia pastoris GS115. The DNA sequence of Cel5B had an open reading frame of 1,077 bp, encoding a protein of 359 amino acid residues with a molecular weight of 47 kDa. On the basis of sequence similarity, Cel5B displayed active site residues at Glu-175 and Glu-287. Both residues lost full hydrolytic activity when replaced with alanine through point mutation. The purified recombinant Cel5B showed very high specific activity, about 80- to 1,000-fold and 13- to 70-fold in comparison with other endoglucanases and cellobiohydrolase, on carboxymethylcellulose and filter paper, respectively, at pH 3.5 and 55°C. Cel5B displayed bifunctional characteristics under acidic conditions. The kinetic properties of the enzyme determined using a Lineweaver-Burk plot indicated that Cel5B is a catalytically efficient cellulolytic enzyme. These results suggest that Cel5B has high bifunctional endo- and exoglucanase activity under acidic conditions and is a good candidate for bioconversion of lignocellulose.