Challenges to Improve Extrusion-Based Additive Manufacturing Process of Thermoplastics toward Sustainable Development.

This review aims to present the different approaches to lessen the environmental impact of the extrusion-based additive manufacturing (MEX) process of thermoplastic-based resins and protect the ecosystem. The benefits and drawbacks of each alternative, including the use of biomaterials or recycled materials as feedstock, energy efficiency, and polluting emissions reduction, have been examined. First, the technological option of using a pellet-fed printer was compared to a filament-fed printer. Then, common biopolymers utilized in MEX applications are discussed, along with methods for improving the mechanical properties of associated printed products. The introduction of natural fillers in thermoplastic resins and the use of biocomposite filaments have been proposed to improve the specific performance of printed items, highlighting the numerous challenges related to their extrusion. Various polymers and fillers derived from recycling are presented as feeding raw materials for printers to reduce waste accumulation, showing the inferior qualities of the resulting goods when compared to printed products made from virgin materials. Finally, the energy consumption and emissions released into the atmosphere during the printing process are discussed, with the potential for both aspects to be controlled through material selection and operating conditions.

Cellulose/Polyhydroxybutyrate (PHB) Composites as a Sustainable Bio-Based Feedstock to 3D-Printing Applications.

In this work, we have studied the potential application for 3D-printing of a polymer made from combining a biodegradable and biocompatible polymer (i.e., polyhydroxybutyrate, PHB) with natural bio-based fiber (i.e., cellulose). To this end, a masterbatch at 15 wt.% in filler content was prepared by melt-blending, and then this system was "diluted" with pure PHB in a second extrusion phase in order to produce filaments at 1.5 and 3 wt.% of cellulose. For comparison, a filament made of 100% virgin PHB pellets was prepared under the same conditions. All the systems were then processed in the 3D-printer apparatus, and specimens were mainly characterized by static (tensile and flexural testing) and dynamic mechanical analysis. Thermogravimetric analysis, differential scanning calorimetry, spectroscopic measurements, and morphological aspects of PHB polymer and composites were also discussed. The results showed a significant negative impact of the process on the mechanical properties of the basic PHB with a reduction in both tensile and flexural mechanical properties. The PHB-cellulose composites showed a good dispersion filler in the matrix but a poor interfacial adhesion between the two phases. Furthermore, the cellulose had no effect on the melting behavior and the crystallinity of the polymer. The addition of cellulose improved the thermal stability of the polymer and minimized the negative impact of extrusion. The mechanical performance of the composites was found to be higher compared to the corresponding (processed) polymer.

Fused Deposition Modelling (FDM) of Thermoplastic-Based Filaments: Process and Rheological Properties-An Overview.

The fused deposition modeling (FDM) process, an extrusion-based 3D printing technology, enables the manufacture of complex geometrical elements. This technology employs diverse materials, including thermoplastic polymers and composites as well as recycled resins to encourage sustainable growth. FDM is used in a variety of industrial fields, including automotive, biomedical, and textiles, as a rapid prototyping method to reduce costs and shorten production time, or to develop items with detailed designs and high precision. The main phases of this technology include the feeding of solid filament into a molten chamber, capillary flow of a non-Newtonian fluid through a nozzle, layer deposition on the support base, and layer-to-layer adhesion. The viscoelastic properties of processed materials are essential in each of the FDM steps: (i) predicting the printability of the melted material during FDM extrusion and ensuring a continuous flow across the nozzle; (ii) controlling the deposition process of the molten filament on the print bed and avoiding fast material leakage and loss of precision in the molded part; and (iii) ensuring layer adhesion in the subsequent consolidation phase. Regarding this framework, this work aimed to collect knowledge on FDM extrusion and on different types of rheological properties in order to forecast the performance of thermoplastics.

Puncture Resistance and UV aging of Nanoparticle-Loaded Waterborne Polyurethane-Coated Polyester Textiles.

The goal of this research was to investigate the effect of different types of nanoparticles on the UV weathering resistance of polyurethane (PU) treatment in polyester-based fabrics. In this regard, zinc oxide nanoparticles (ZnO), hydrophilic silica nanoparticles (SiO2 (200)), hydrophobic silica nanoparticles (SiO2 (R812)), and carbon nanotubes (CNT) were mixed into a waterborne polyurethane dispersion and impregnated into textile samples. The puncturing resistance of the developed specimens was examined before and after UV-accelerated aging. The changes in chemical structure and surface appearance in nanoparticle-containing systems and after UV treatments were documented using microscopic pictures and infrared spectroscopy (in attenuated total reflectance mode). Polyurethane impregnation significantly enhanced the puncturing strength of the neat fabric and reduced the textile's ability to be deformed. However, after UV aging, mechanical performance was reduced both in the neat and PU-impregnated specimens. After UV treatment, the average puncture strength of all nanoparticle-containing systems was always greater than that of aged fabrics impregnated with PU alone. In all cases, infrared spectroscopy revealed some slight differences in the absorbance intensity of characteristic peaks for polyurethane polymer in specimens before and after UV rays, which could be related to probable degradation effects.

Special Issue "Mechanical Performance of Sustainable Bio-Based Compounds".

The global production of plastic is increasing, and plastic represents one of the most popular materials, widespread in countless applications in commercial and industrial fields and everyday life [...].

Recovery of Waste Material from Biobags: 3D Printing Process and Thermo-Mechanical Characteristics in Comparison to Virgin and Composite Matrices.

The purpose of this study is to limit the environmental impact of packaging applications by promoting the recycling of waste products and the use of sustainable materials in additive manufacturing technology. To this end, a commercial polylactide acid (PLA)-based filament derived from waste production of bio-bags is herein considered. For reference, a filament using virgin PLA and one using a wood-based biocomposite were characterized as well. Preliminary testing involved infrared spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The effect of printing parameters (namely bed temperature, layer thickness, top surface layers, retraction speed, and distance) on the final aesthetics of 3D printed parts was verified. The results allow us to attest that the thermal properties of recycled polymer are comparable to those of virgin PLA and biocomposite. In the case of recycled polymer, after the extrusion temperature, bed temperature, and printing speed are estabilished the lowest allowable layer thickness and an appropriate choice of retraction movements are required in order to realize 3D-printed objects without morphological defects visible to the naked eyes. In the case of wood biocomposite, the printing process was complicated by frequent obstructions, and in none of the operating conditions was it possible to obtain an aesthetically satisfying piece of the chosen geometry (Lego-type bricks) Finally, mechanical testing on the 3D printed parts of each system showed that the recycled PLA behaves similarly to virgin and wood/PLA filaments.

Towards the Sustainability of the Plastic Industry through Biopolymers: Properties and Potential Applications to the Textiles World.

This study aims to provide an overview of the latest research studies on the use of biopolymers in various textile processes, from spinning processes to dyeing and finishing treatment, proposed as a possible solution to reduce the environmental impact of the textile industry. Recently, awareness of various polluting aspects of textile production, based on petroleum derivatives, has grown significantly. Environmental issues resulting from greenhouse gas emissions, and waste accumulation in nature and landfills, have pushed research activities toward more sustainable, low-impact alternatives. Polymers derived from renewable resources and/or with biodegradable characteristics were investigated as follows: (i) as constituent materials in yarn production, in view of their superior ability to be decomposed compared with common synthetic petroleum-derived plastics, positive antibacterial activities, good breathability, and mechanical properties; (ii) in textile finishing to act as biological catalysts; (iii) to impart specific functional properties to treated textiles; (iv) in 3D printing technologies on fabric surfaces to replace traditionally more pollutive dye-based and inkjet printing; and (v) in the implants for the treatment of dye-contaminated water. Finally, current projects led by well-known companies on the development of new materials for the textile market are presented.

Rotational Rheology of Wood Flour Composites Based on Recycled Polyethylene.

In this paper, we study the effect of the addition of wood flour as a filler in a recycled polyethylene (r-PE) in view of its potential applications in 3D printing. The composites, prepared by melt mixing, are characterized with torque measurements performed during the compounding, dynamic rotational rheology, and infrared spectroscopy. Data show that the introduction of wood results in increased viscosity and in sensible viscous heating during the compounding. The r-PE appear to be stable at temperatures up to 180 °C while at higher temperatures the material shows a rheological response characterized by time-increasing viscoelastic moduli that suggests a thermal degradation governed by crosslinking reactions. The compounds (with wood loading up to 50% in wt.) also shows thermal stability at temperatures up to 180 °C. The viscoelastic behavior and the infrared spectra of the r-PE matrix suggests the presence of branches in the macromolecular structure due to the process. Although the addition of wood particles determines increased viscoelastic moduli, a solid-like viscoelastic response is not shown even for the highest wood concentrations. This behavior, due to a poor compatibility and weak interfacial adhesion between the two phases, is however promising in view of common processing technologies as extrusion or injection molding.

Polyurethane Impregnation for Improving the Mechanical and the Water Resistance of Polypropylene-Based Textiles.

Commercial waterborne polyurethane (PU) dispersions, different in chemistry and selected on the basis of eco-friendly components, have been applied to a common polypropylene (PP)-based woven fabric. Impregnation has been chosen as a textile treatment for improving the features of basic technical textiles in light of potential applicability in luggage and bag production. The effect of drying method, performed under conditions achieved by varying the process temperature and pressure, on the features of the treated textiles, has been verified. The prepared specimens were characterized in terms of mechanical behavior (tensile, tear and abrasion resistance) and water resistance (surface wettability and hydrostatic pressure throughout the treated textiles). The experimental results suggest an incremental improvement of the tensile features for all the investigated specimens. For tear strength, no augmentation compared to that of the neat textile, could be verified as a consequence of polyurethane treatment. Remarkable improvements of abrasion resistance were displayed for all the impregnated PP textiles. Benefits in water resistance could be attributed to the presence of hydrophobic PU in the textile weaving of the PP samples. The ultimate improvement in water resistance was dependent on drying conditions.

Influence of the Processing Conditions on the Mechanical Performance of Sustainable Bio-Based PLA Compounds.

Cellulose/PLA-based blends (up to 77 vol./vol.% of the added fibers) for applications in extrusion-based technology were realized in an internal mixer by setting different operating conditions. In particular, both the mixing time and temperature were increased in order to simulate a recycling operation (10 or 25 min, 170 or 190 °C) and gain information on the potential reuse of the developed systems. The torque measurements during the compound's preparation, and the compound's mechanical tensile features, both in the static and dynamic mode, were evaluated for each investigated composition. The final results confirmed a reduction of the torque trend over time for the PLA matrix, which was attributed to a possible degradation mechanism, and confirmed by infrared spectroscopy. The mechanical behaviour of the pristine polymer changed from elastoplastic to brittle, with a significant loss in ductility going from the lower mixing temperatures up to the higher ones for the longest time. Through the addition of cellulose fibers into the composite systems, a higher stabilization of the torque in the time and an improvement in the mechanical performance were always verified compared to the neat PLA, with a maximum increase in the Young modulus (+100%) and the tensile strength (+57%), and a partial recovery of the ductility.

Epoxy Based Blends for Additive Manufacturing by Liquid Crystal Display (LCD) Printing: The Effect of Blending and Dual Curing on Daylight Curable Resins.

Epoxy-based blends printable in a Liquid Crystal Display (LCD) printer were studied. Diglycidyl ether of bisphenol A (DGEBA) mixed with Diethyltoluene diamine (DETDA) was used due to the easy processing in liquid form at room temperature and slower reactivity until heated over 150 ° C. The DGEBA/DETDA resin was mixed with a commercial daylight photocurable resin used for LCD screen 3D printing. Calorimetric, dynamic mechanical and rheology testing were carried out on the resulting blends. The daylight resins showed to be thermally curable. Resin's processability in the LCD printer was evaluated for all the blends by rheology and by 3D printing trials. The best printing conditions were determined by a speed cure test. The use of a thermal post-curing cycle after the standard photocuring in the LCD printer enhanced the glass transition temperature T g of the daylight resin from 45 to 137 ° C when post-curing temperatures up to 180 ° C were used. The T g reached a value of 174 ° C mixing 50 wt% of DGEBA/DETDA resin with the photocurable resin when high temperature cure cycle was used.

Eco-Sustainability of the Textile Production: Waste Recovery and Current Recycling in the Composites World.

This work aimed to review the recent scientific research, focused on the application of recycled fibers, taken from textile waste, in the field of composite materials to fulfill the eco-sustainability requirements of textile manufacturing, and promote actions for a circular economy. The yarns and fabric production represent one of the most polluting processes of the industrial world. The harmful environmental impact of the textile process has been described by reporting the different treatments involving the raw material and the filament fabrication, and concerning the uses of insecticides, fertilizers, and many other chemicals for improving the quality of the final products. In addition, solid textile waste constituted a further additional issue for the environmental sustainability of fabric production. Various strategies have been discussed and in part already adopted by many companies to recover waste fibers and prevent them from ending up in landfills. The alternatives of fiber recycling for composite realization have been presented by reporting several recent studies involving the uses of recycled fibers from the textile waste embedded in different matrices: thermoplastic polymer, thermosetting resins, natural constituents, and concrete in light of specific applications.

The Puncture and Water Resistance of Polyurethane- Impregnated Fabrics after UV Weathering.

Polyurethane is a polymer adaptable to different scientific and industrial requirements; nevertheless it is also extremely susceptible to UV radiation, which compromises the physical and mechanical functionality. In this framework, our study investigated the effect of waterborne polyurethane dispersion (WPUD) applied to a polyester (PET)-based fabric, through the impregnation method, on the puncturing and water resistance of the pristine material, before and after UV weathering. Results confirmed an increment of both features in the prepared fabrics, attributed to the PUR textile treatment; but a partially loss of the gained properties in the samples due to the UV weathering. In order to improve the efficiency of the impregnating dispersions, in protecting the durability of the treated materials, the addition of different UV light stabilizers, or/and of crosslinking agent into WPUD was also tested. From the experimental data, it can be concluded that formulations based on WPUD, containing both the crosslinker and UV organic absorber, have displayed an increment of their perforation and water resistance for the treated samples with respect to the starting textile, and contemporary have preserved the features against the UV light. Finally, microscopic and spectroscopic analyses have been performed as further characterization techniques of the samples surface.