Microfiber shedding from nonwoven materials including wipes and meltblown nonwovens in air and water environments.

Nonwoven products are widely used in disposable products, such as wipes, diapers, and masks. Microfibers shed from these products in the aquatic and air environment have not been fully described. In the present study, 15 commercial single-use nonwoven products (wipes) and 16 meltblown nonwoven materials produced in a pilot plant were investigated regarding their microfiber generation in aquatic and air environments and compared to selected textile materials and paper tissue materials. Microfibers shed in water were studied using a Launder Ometer equipment (1-65 mg of microfibers per gram material), and microfibers shed in air were evaluated using a dusting testing machine that shakes a piece of the nonwoven back and forth (~ 4 mg of microfibers per gram material). The raw materials and bonding technologies affected the microfiber generation both in water and air conditions. When the commercial nonwovens contained less natural cellulosic fibers, less microfibers were generated. Bonding with hydroentangling and/or double bonding by two different bonding methods could improve the resistance to microfiber generation. Meltblown nonwoven fabrics generated fewer microfibers compared to the other commercial nonwovens studied here, and the manufacturing factors, such as DCD (die-to-collector distance) and air flow rate, affected the tendency of microfiber generation. The results suggest that it is possible to control the tendency of microfiber shedding through the choice of operating parameters during nonwoven manufacturing processes.

Impact of dyes and finishes on the aquatic biodegradability of cotton textile fibers and microfibers released on laundering clothes: Correlations between enzyme adsorption and activity and biodegradation rates.

The presence and biodegradability of textile microfibers shed during laundering or use is an important environmental issue. In this research, the influence of common textile finishes on the persistence of cotton fibers in an aerobic aquatic environment was assessed. The biodegradation of cotton knitted fabrics with different finishes, silicone softener, durable press, water repellent, and a blue reactive dye was evaluated. The rate of biodegradation decreased with durable press and water repellant finishing treatments. In terms of the final extent of biodegradation, there was no significant difference between the samples. All samples reached more than 60% biodegradation in 102 days. The biodegradation rates were in agreement with observed trends of the same samples for cellulase mediated hydrolysis and cellulase adsorption experiments, indicating the finishes impact the initial adsorption of enzymes excreted by the microorganisms and the initial rates of biodegradation, however despite this the cellulosic material maintains its biodegradability.

Bacterial valorization of pulp and paper industry process streams and waste.

The pulp and paper industry is a major source of lignocellulose-containing streams. The components of lignocellulose material are lignin, hemicellulose, and cellulose that may be hydrolyzed into their smaller components and used as feedstocks for valorization efforts. Much of this material is contained in underutilized streams and waste products, such as black liquor, pulp and paper sludge, and wastewater. Bacterial fermentation strategies have suitable potential to upgrade lignocellulosic biomass contained in these streams to value-added chemicals. Bacterial conversion allows for a sustainable and economically feasible approach to valorizing these streams, which can bolster and expand applications of the pulp and paper industry. This review discusses the composition of pulp and paper streams, bacterial isolates from process streams that can be used for lignocellulose biotransformations, and technological approaches for improving valorization efforts. KEY POINTS: • Reviews the conversion of pulp and paper industry waste by bacterial isolates. • Metabolic pathways for the breakdown of lignocellulose components. • Methods for isolating bacteria, determining value-added products, and increasing product yields.

Impact of dyes and finishes on the microfibers released on the laundering of cotton knitted fabrics.

The influence of common textile finishes on cotton fabrics on the generation of microfibers during laundering was assessed. Microfiber release was determined to be in the range of 9000-14,000 particles per gram of cotton fabric. Cotton knitted fabrics treated with softener and durable press generate more microfibers (1.30-1.63 mg/g fabric) during laundering by mass and number than untreated fabric (0.73 mg/g fabric). The fabrics treated with softener generated the longest average microfiber length (0.86 mm), whereas durable press and water repellent treatments produced the shortest average microfiber length (0.62 and 0.63 mm, respectively). In general, the changes in the mechanical properties of the fibers and fabrics due to the finishing treatments are the main factor affecting the microfiber release. The abrasion resistance of the fabrics decreases for durable press treatments and water repellent treatments due to the brittleness in the structure originated by the crosslinking treatment. In the case of the softener treatment, the fabric surface is soft and smooth decreasing the friction coefficient between fibers favoring the fibers loosening from the textile and resulting in a high tendency for fuzz formation and microfiber release. These findings are useful for the textile industry in the design and selection of materials and treatments for the reduction of synthetic or natural microfiber shedding from textiles.

Aerobic biodegradation in freshwater and marine environments of textile microfibers generated in clothes laundering: Effects of cellulose and polyester-based microfibers on the microbiome.

The aerobic biodegradation of common textiles that shed microfibers during laundering was evaluated under the action of microbes found in the environment, such as lake and seawater, and activated sludge at a low concentration from a wastewater treatment plant (WWTP). Under these conditions, the biodegradation potential was the same in all the experiments: Microcrystalline Cellulose (MCC) > Cotton > Rayon > Polyester/Cotton â‰« Polyester. Nevertheless, for cotton and rayon yarns, >70% biodegradation was achieved with activated sludge at low concentration and lake water, whereas in seawater, about 50% degradation was reached. Polyester did not appreciably degrade. The biodegradation results herein indicate potential not absolutes in nature. The bacterial diversity analyses in the different biodegradation inoculums show that there are distinct bacterial communities related to the assimilation and mineralization of complex carbohydrates that were promoted with the cellulosic MCC, cotton, and rayon samples different than the polyester sample.

Microfibers generated from the laundering of cotton, rayon and polyester based fabrics and their aquatic biodegradation.

The effect of fiber type (cotton, polyester, and rayon), temperature, and use of detergent on the number of microfibers released during laundering of knitted fabrics were studied during accelerated laboratory washing (Launder-Ometer) and home laundering experiments. Polyester and cellulose-based fabrics all shed significant amounts of microfibers and shedding levels were increased with higher water temperature and detergent use. Cellulose-based fabrics released more microfibers (0.2-4 mg/g fabric) during accelerated laundering than polyester (0.1-1 mg/g fabric). Using well-controlled aquatic biodegradation experiments it was shown that cotton and rayon microfibers are expected to degrade in natural aquatic aerobic environments whereas polyester microfibers are expected to persist in the environment for long periods of time.

Characterization of Clostridium ljungdahlii OTA1: a non-autotrophic hyper ethanol-producing strain.

A Clostridium ljungdahlii lab-isolated spontaneous-mutant strain, OTA1, has been shown to produce twice as much ethanol as the C. ljungdahlii ATCC 55383 strain when cultured in a mixotrophic medium containing fructose and syngas. Whole-genome sequencing identified four unique single nucleotide polymorphisms (SNPs) in the C. ljungdahlii OTA1 genome. Among these, two SNPs were found in the gene coding for AcsA and HemL, enzymes involved in acetyl-CoA formation from CO/CO2. Homology models of the respective mutated enzymes revealed alterations in the size and hydrogen bonding of the amino acids in their active sites. Failed attempts to grow OTA1 autotrophically suggested that one or both of these mutated genes prevented acetyl-CoA synthesis from CO/CO2, demonstrating that its activity was required for autotrophic growth by C. ljungdahlii. An inoperable Wood-Ljungdahl pathway resulted in higher CO2 and ethanol yields and lower biomass and acetate yields compared to WT for multiple growth conditions including heterotrophic and mixotrophic conditions. The two other SNPs identified in the C. ljungdahlii OTA1 genome were in genes coding for transcriptional regulators (CLJU_c09320 and CLJU_c18110) and were found to be responsible for deregulated expression of co-localized arginine catabolism and 2-deoxy-D-ribose catabolism genes. Growth medium supplementation experiments suggested that increased arginine metabolism and 2-deoxy-D-ribose were likely to have minor effects on biomass and fermentation product yields. In addition, in silico flux balance analysis simulating mixotrophic and heterotrophic conditions showed no change in flux to ethanol when flux through HemL was changed whereas limited flux through AcsA increased the ethanol flux for both simulations. In characterizing the effects of the SNPs identified in the C. ljungdahlii OTA1 genome, a non-autotrophic hyper ethanol-producing strain of C. ljungdahlii was identified that has utility for further physiology and strain performance studies and as a biocatalyst for industrial applications.

Draft Genome Sequences of Two Strains of Paenibacillus glucanolyticus with the Ability To Degrade Lignocellulose.

Paenibacillus glucanolyticus 5162, a bacterium isolated from soil, and Paenibacillus glucanolyticus SLM1, a bacterium isolated from pulp mill waste, can utilize cellulose, hemicellulose and lignin as sole carbon sources for growth. These two strains of Paenibacillus glucanolyticus were sequenced using PacBio and Illumina MiSeq technologies.

Metabolic response of Clostridium ljungdahlii to oxygen exposure.

Clostridium ljungdahlii is an important synthesis gas-fermenting bacterium used in the biofuels industry, and a preliminary investigation showed that it has some tolerance to oxygen when cultured in rich mixotrophic medium. Batch cultures not only continue to grow and consume H2, CO, and fructose after 8% O2 exposure, but fermentation product analysis revealed an increase in ethanol concentration and decreased acetate concentration compared to non-oxygen-exposed cultures. In this study, the mechanisms for higher ethanol production and oxygen/reactive oxygen species (ROS) detoxification were identified using a combination of fermentation, transcriptome sequencing (RNA-seq) differential expression, and enzyme activity analyses. The results indicate that the higher ethanol and lower acetate concentrations were due to the carboxylic acid reductase activity of a more highly expressed predicted aldehyde oxidoreductase (CLJU_c24130) and that C. ljungdahlii's primary defense upon oxygen exposure is a predicted rubrerythrin (CLJU_c39340). The metabolic responses of higher ethanol production and oxygen/ROS detoxification were found to be linked by cofactor management and substrate and energy metabolism. This study contributes new insights into the physiology and metabolism of C. ljungdahlii and provides new genetic targets to generate C. ljungdahlii strains that produce more ethanol and are more tolerant to syngas contaminants.

Bacterial biodegradation and bioconversion of industrial lignocellulosic streams.

Lignocellulose is a term for plant materials that are composed of matrices of cellulose, hemicellulose, and lignin. Lignocellulose is a renewable feedstock for many industries. Lignocellulosic materials are used for the production of paper, fuels, and chemicals. Typically, industry focuses on transforming the polysaccharides present in lignocellulose into products resulting in the incomplete use of this resource. The materials that are not completely used make up the underutilized streams of materials that contain cellulose, hemicellulose, and lignin. These underutilized streams have potential for conversion into valuable products. Treatment of these lignocellulosic streams with bacteria, which specifically degrade lignocellulose through the action of enzymes, offers a low-energy and low-cost method for biodegradation and bioconversion. This review describes lignocellulosic streams and summarizes different aspects of biological treatments including the bacteria isolated from lignocellulose-containing environments and enzymes which may be used for bioconversion. The chemicals produced during bioconversion can be used for a variety of products including adhesives, plastics, resins, food additives, and petrochemical replacements.

Isolation of Paenibacillus glucanolyticus from pulp mill sources with potential to deconstruct pulping waste.

Black liquor is a pulping waste generated by the kraft process that has potential for downstream bioconversion. A microorganism was isolated from a black liquor sample collected from the Department of Forest Biomaterials at North Carolina State University. The organism was identified as Paenibacillus glucanolyticus using 16S rRNA sequence analysis and was shown to be capable of growth on black liquor as the sole carbon source based on minimal media growth studies. Minimal media growth curves demonstrated that this facultative anaerobic microorganism can degrade black liquor as well as cellulose, hemicellulose, and lignin. Gas chromatography-mass spectrometry was used to identify products generated by P. glucanolyticus when it was grown anaerobically on black liquor. Fermentation products which could be converted into high-value chemicals such as succinic, propanoic, lactic, and malonic acids were detected.

Methods for facilitating microbial growth on pulp mill waste streams and characterization of the biodegradation potential of cultured microbes.

The kraft process is applied to wood chips for separation of lignin from the polysaccharides within lignocellulose for pulp that will produce a high quality paper. Black liquor is a pulping waste generated by the kraft process that has potential for downstream bioconversion. However, the recalcitrant nature of the lignocellulose resources, its chemical derivatives that constitute the majority of available organic carbon within black liquor, and its basic pH present challenges to microbial biodegradation of this waste material. Methods for the collection and modification of black liquor for microbial growth are aimed at utilization of this pulp waste to convert the lignin, organic acids, and polysaccharide degradation byproducts into valuable chemicals. The lignocellulose extraction techniques presented provide a reproducible method for preparation of lignocellulose growth substrates for understanding metabolic capacities of cultured microorganisms. Use of gas chromatography-mass spectrometry enables the identification and quantification of the fermentation products resulting from the growth of microorganisms on pulping waste. These methods when used together can facilitate the determination of the metabolic activity of microorganisms with potential to produce fermentation products that would provide greater value to the pulping system and reduce effluent waste, thereby increasing potential paper milling profits and offering additional uses for black liquor.

Survey of soy protein flour as a novel dry strength agent for papermaking furnishes.

A series of experiments were conducted on recycled pulp samples for the novel purpose of determining the efficacy of employing soy protein flour to increase the strength of dry paper. Values of short span compression and tensile strength were the prime criteria for comparison based on industrial considerations. Various conditions were considered to uncover effective schemes for applying the soy proteins under industrial-like papermaking conditions including alkaline versus acidic as well as high or low ionic content papermaking conditions. A hybrid system of starch, a dry strength additive currently used in paper furnishes, and soy protein was considered to study the possible existence of any synergistic chemical effects. Results indicated that a 1 part (by mass) soy protein to 3 parts cationic starch hybrid system resulted in the highest strength increase in comparison to solely either the soy protein or the cationic starch as dry strength additives.

Piezoelectric Effect of Cellulose Nanocrystals Thin Films.

Ultrathin films of aligned cellulose nanocrystals (CNCs) were assembled on mica supports by using electric field-assisted shear. The relationship between polarization gradients and strain mechanics of the obtained films was examined by monitoring their deflection with an atomic force microscope operated in contact mode. The piezoelectric response of the films was ascribed to the collective contribution of the asymmetric crystalline structure of the cellulose crystals. The magnitude of the effective shear piezoelectric constant (d25) of highly ordered CNC films was determined to be 2.1 Å/V, which is comparable to that of a reference film of a piezoelectric metal oxide.

Effect of moisture on electrospun nanofiber composites of poly(vinyl alcohol) and cellulose nanocrystals.

The effect of humidity on the morphological and thermomechanical properties of electrospun poly(vinyl alcohol) (PVA) fiber mats reinforced with cellulose nanocrystals (CNs) was investigated. Scanning electron microscopy (SEM) images revealed that the incorporation of CNs improved the morphological stability of the composite fibers even in high humidity environments. Thermal and mechanical properties of the electrospun fiber mats were studied by using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and large deformation tensile tests under controlled humidity and temperatures. The balance between the moisture-induced plasticization and the reinforcing effect of rigid CN particles was critical in determining the thermomechanical behaviors of the electrospun fiber mats. Results indicated that the stabilizing effect of the CNs in the PVA matrix might be compromised by water absorption, disrupting the hydrogen bonding within the structure. The amount of this disruption depended on the surrounding humidity and the CN loading. The reduction in tensile strength of neat PVA fiber mats as they were conditioned from low relative humidity (10% RH) to high relative humidity (70% RH) was found to be about 80%, from 1.5 to 0.4 MPa. When the structure was reinforced with CNs, the reduction in strength was limited to 40%, from 2 to 0.8 MPa over the same range in relative humidity. More importantly, the CN-loaded PVA fiber mats showed a reversible recovery in mechanical strength after cycling the relative humidity. Finally, humidity treatments of the composite PVA fiber mats induced significant enhancement of their strength as a result of the adhesion between the continuous matrix and the CNs.

Synthesis and characterization of starch citrate-chitosan foam with superior water and saline absorbance properties.

The objective of this research was to synthesize and characterize high-value foam gel materials with unique absorptive and mechanical properties from starch citrate-chitosan. The effects of starch citrate concentration, pH, solid to liquid ratio, reaction time, and temperature on absorbency, weight loss in water, and strength were determined. The cross-linked starch citrate-chitosan foam is flexible and elastic and has significantly increased absorbance and strength and decreased weight loss in water compared to starch-chitosan foam. A unique characteristic of the starch citrate-chitosan foam is that it absorbs more saline solution than pure water, which is the opposite of current commercial super absorbents. An increased strength, increased degradation temperature, increased storage modulus, and decreased weight loss in water for starch citrate-chitosan relative to starch-chitosan are in agreement with amide bonds formed between the carboxyl group of starch citrate and the amino group of chitosan.

The effect of chemical composition on microfibrillar cellulose films from wood pulps: mechanical processing and physical properties.

Films of microfibrillated celluloses (MFCs) from pulps of different yields, containing varying amounts of extractives, lignin, and hemicelluloses, were produced by combining refining and high-pressure homogenization techniques. MFC films were produced using a casting-evaporation technique and the physical and mechanical properties (including density, roughness, fold endurance and tensile properties) were determined. Homogenization of bleached and unbleached Kraft pulps gave rise to highly individualized MFCs, but not for thermo-mechanical pulp (TMP). The resulting MFC films had a roughness equivalent to the surface upon which the films were cast. Interestingly, after homogenization, the presence of lignin significantly increased film toughness, tensile index, and elastic modulus. The hornification of fibers through a drying and rewetting cycle prior to refining and homogenization did not produce any significant effect compared to films from never-dried fibers, indicating that MFC films can potentially be made from low-cost recycled cellulosic materials.

Nanofiber composites of polyvinyl alcohol and cellulose nanocrystals: manufacture and characterization.

Cellulose nanocrystals (CN) were used to reinforce nanofibers in composite mats produced via electrospinning of poly(vinyl alcohol) (PVA) with two different concentrations of acetyl groups. Ultrathin cross-sections of the obtained nanocomposites consisted of fibers with maximum diameters of about 290 nm for all the CN loads investigated (from 0 to 15% CN loading). The electrospinning process did not affect the structure of the PVA polymer matrix, but its degree of crystallinity increased significantly together with a slight increase in the corresponding melting temperature. These effects were explained as being the result of alignment and enhanced crystallization of PVA chains within the individual nanofibers that were subjected to high shear stresses during electrospinning. The strong interaction of the PVA matrix with the dispersed CN phase, mainly via hydrogen bonding or bond network, was reduced with the presence of acetyl groups in PVA. Most importantly, the elastic modulus of the nanocomposite mats increased significantly as a consequence of the reinforcing effect of CNs via the percolation network held by hydrogen bonds. However, this organization-driven crystallization was limited as observed by the reduction in the degree of crystallinity of the CN-loaded composite fibers. Finally, efficient stress transfer and strong interactions were demonstrated to occur between the reinforcing CN and the fully hydrolyzed PVA electrospun fibers.