Production of Magnetic Arsenic-Phosphorus Alloy Nanoribbons with Small Band Gaps and High Hole Conductivities.

Quasi-1D nanoribbons provide a unique route to diversifying the properties of their parent 2D nanomaterial, introducing lateral quantum confinement and an abundance of edge sites. Here, a new family of nanomaterials is opened with the creation of arsenic-phosphorus alloy nanoribbons (AsPNRs). By ionically etching the layered crystal black arsenic-phosphorus using lithium electride followed by dissolution in amidic solvents, solutions of AsPNRs are formed. The ribbons are typically few-layered, several micrometers long with widths tens of nanometers across, and both highly flexible and crystalline. The AsPNRs are highly electrically conducting above 130 K due to their small band gap (ca. 0.035 eV), paramagnetic in nature, and have high hole mobilities, as measured with the first generation of AsP devices, directly highlighting their properties and utility in electronic devices such as near-infrared detectors, quantum computing, and charge carrier layers in solar cells.

A Non-Destructive, Tuneable Method to Isolate Live Cells for High-Speed AFM Analysis.

Suitable immobilisation of microorganisms and single cells is key for high-resolution topographical imaging and study of mechanical properties with atomic force microscopy (AFM) under physiologically relevant conditions. Sample preparation techniques must be able to withstand the forces exerted by the Z range-limited cantilever tip, and not negatively affect the sample surface for data acquisition. Here, we describe an inherently flexible methodology, utilising the high-resolution three-dimensional based printing technique of multiphoton polymerisation to rapidly generate bespoke arrays for cellular AFM analysis. As an example, we present data collected from live Emiliania huxleyi cells, unicellular microalgae, imaged by contact mode High-Speed Atomic Force Microscopy (HS-AFM), including one cell that was imaged continuously for over 90 min.

Sample preparation methods for optimal HS-AFM analysis: Duplex stainless steel.

The contact mode high-speed atomic force microscope (AFM) operates orders of magnitude faster than conventional AFMs. It is capable of capturing multiple frames per second with nanometre-scale lateral resolution and subatomic height resolution. This advancement in imaging rate allows for microscale analysis across macroscale surfaces, making it suitable for applications across materials science. However, the quality of the surface analysis obtained by high-speed AFM is highly dependent upon the standard of sample preparation and the resultant final surface finish. In this study, different surface preparation techniques that are commonly implemented within metallurgical studies are compared for samples of SAF 2205 duplex stainless steel. It was found that, while acid etching and electrolytic etching were optimal for the low resolution of optical microscopy, these methods were less suited for analysis by high resolution high-speed AFM. Mechanical and colloidal silica polishing was found to be the optimal method explored, as it provided a gentle etch of the surface allowing for high quality topographic maps of the sample surface.

Development of a facile fluorophosphonate-functionalised titanium surface for potential orthopaedic applications.

BACKGROUND: Aseptic loosening of total joint replacements (TJRs) continues to be the main cause of implant failures. The socioeconomic impact of surgical revisions is hugely significant; in the United Kingdom alone, it is estimated that £137 m is spent annually on revision arthroplasties. Enhancing the longevity of titanium implants will help reduce the incidence and overall cost of failed devices. METHODS: In realising the development of a superior titanium technology, we exploited the natural affinity of titanium for phosphonic acids and developed a facile means of coating the metal with (3S)1-fluoro-3-hydroxy-4-(oleoyloxy)butyl-1-phosphonate (FHBP), a phosphatase-resistant analogue of lysophosphatidic acid (LPA). Importantly LPA and selected LPA analogues like FHBP synergistically cooperate with calcitriol to promote human osteoblast formation and maturation. RESULTS: Herein, we provide evidence that simply immersing titanium in aqueous solutions of FHBP afforded a surface that was superior to unmodified metal at enhancing osteoblast maturation. Importantly, FHBP-functionalised titanium remained stable to 2 years of ambient storage, resisted ∼35 kGy of gamma irradiation and survived implantation into a bone substitute (Sawbone™) and irrigation. CONCLUSION: The facile step we have taken to modify titanium and the robustness of the final surface finish are appealing properties that are likely to attract the attention of implant manufacturers in the future. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: We have generated a functionalised titanium (Ti) surface by simply immersing Ti in aqueous solutions of a bioactive lipid. As a facile procedure it will have greater appeal to implant manufacturers compared to onerous and costly developmental processes.

Euler-Bernoulli theory accurately predicts atomic force microscope cantilever shape during non-equilibrium snap-to-contact motion.

We prove that the Euler-Bernoulli elastic beam theory can be reliably used to describe the dynamics of an atomic force microscope cantilever during the far from equilibrium snap-to-contact event. In conventional atomic force microscope operation, force-separation curves are obtained by post-processing voltage versus time traces produced by measuring one point on the cantilever close to the hanging end. In this article, we assess the validity of the Euler-Bernoulli equation during the snap-to-contact event. The assessment is based on a direct comparison between experiment and theory. The experiment uses Doppler vibrometry to measure displacement versus time for many points along the long axis of the cantilever. The theoretical algorithm is based on a solution of the Euler-Bernoulli equation to obtain the full shape of the cantilever as a function of time. The algorithm uses as boundary conditions, experimentally obtained information only near the hanging end of the cantilever. The solution is obtained in a manner that takes into account non-equilibrium motion. Within experimental error, the theory agrees with experiment indicating that the Euler-Bernoulli theory is appropriate to predict the cantilever kinematics during snap-to-contact. Since forces on the tip can be obtained from the instantaneous shape of the cantilever, this work should allow for computation of tip-sample forces during the snap-to-contact event from a conventional force-distance measured input.

Production of phosphorene nanoribbons.

Phosphorene is a mono-elemental, two-dimensional (2D) substance with outstanding, highly directional properties and a bandgap that depends on the number of layers of the material1-8. Nanoribbons, meanwhile, combine the flexibility and unidirectional properties of one-dimensional nanomaterials, the high surface area of 2D nanomaterials and the electron-confinement and edge effects of both. The structures of nanoribbons can thus lead to exceptional control over electronic band structure, the emergence of novel phenomena and unique architectures for applications5,6,9-24. Phosphorene's intrinsically anisotropic structure has motivated numerous theoretical calculations of phosphorene nanoribbons (PNRs), predicting extraordinary properties5,6,12-24. So far, however, discrete PNRs have not been produced. Here we present a method for creating quantities of high-quality, individual PNRs by ionic scissoring of macroscopic black phosphorus crystals. This top-down process results in stable liquid dispersions of PNRs with typical widths of 4-50 nm, predominantly single-layer thickness, measured lengths of up to 75 µm and aspect ratios of up to 1,000. The nanoribbons are atomically flat single crystals, aligned exclusively in the zigzag crystallographic orientation. The ribbons have remarkably uniform widths along their entire lengths, and are extremely flexible. These properties-together with the ease of downstream manipulation via liquid-phase methods-should enable the search for predicted exotic states6,12-14,17-19,21, and an array of applications in which PNRs have been predicted to offer transformative advantages. These applications range from thermoelectric devices to high-capacity fast-charging batteries and integrated high-speed electronic circuits6,14-16,20,23,24.

Algal Viruses: The (Atomic) Shape of Things to Come.

Visualization of algal viruses has been paramount to their study and understanding. The direct observation of the morphological dynamics of infection is a highly desired capability and the focus of instrument development across a variety of microscopy technologies. However, the high temporal (ms) and spatial resolution (nm) required, combined with the need to operate in physiologically relevant conditions presents a significant challenge. Here we present a short history of virus structure study and its relation to algal viruses and highlight current work, concentrating on electron microscopy and atomic force microscopy, towards the direct observation of individual algae⁻virus interactions. Finally, we make predictions towards future algal virus study direction with particular focus on the exciting opportunities offered by modern high-speed atomic force microscopy methods and instrumentation.

A study of dynamic nanoscale corrosion initiation events using HS-AFM.

Atomic force microscopes (AFMs) are capable of high-resolution mapping of structures and the measurement of mechanical properties on nanometre scales within gaseous, liquid and vacuum environments. The contact mode high-speed AFM (HS-AFM) developed at Bristol Nano Dynamics Ltd. operates at speeds that are orders of magnitude faster than conventional AFMs, and is capable of capturing multiple frames per second. This allows for direct observation of dynamic events in real-time, with nanometre lateral resolution and subatomic height resolution. HS-AFM is a valuable tool for the imaging of nanoscale corrosion initiation events, such as metastable pitting, grain boundary (GB) dissolution and short crack formation during stress corrosion cracking (SCC). Within this study HS-AFM was combined with SEM and FIB milling to produce a multifaceted picture of localised corrosion events occurring on thermally sensitised AISI 304 stainless steel in an aqueous solution of 1% sodium chloride (NaCl). HS-AFM measurements were performed in situ by imaging within a custom built liquid cell with parallel electrochemical control. The high resolution of the HS-AFM allowed for measurements to be performed at individual reaction sites, i.e. at specific GB carbide surfaces. Topographic maps of the sample surface allowed for accurate measurements of the dimensions of pits formed. Using these measurements it was possible to calculate, and subsequently model, the volumes of metal reacting with respect to time, and so the current densities and ionic fluxes at work. In this manner, the local electrochemistry at nanoscale reaction sites may be reconstructed.

Development and validation of a high-resolution mapping platform to aid in the public awareness of radiological hazards.

The distribution, quantification and exposure-related effects of radiation in the environment, arising from both natural and anthropogenic sources, is of great (and growing) concern for global populations. Recent events at the Fukushima Daiichi Nuclear Plant (FDNPP) have further highlighted the importance of developing radiation mapping technologies that not only contribute to the continued assessment of contamination, but can serve as an educational tool for members of the public regarding both its behaviour and extent. With an even greater number of people possessing smart-phone technology, a lightweight and portable 'connected system' has been developed to demonstrate to users the calibrated radioactive dose rate in an area, viewable in real-time through a dedicated phone application. As well as allowing for system users to be alerted where variations in dose rate are experienced, the combined results from multiple systems are viewable through a custom-built desktop application-permitting the output obtained via any number of units to be similarly displayed in real-time. A successful initial trialling of the system is described at a former tin mine in Cornwall (south-west England)-known to exhibit low, but identifiable radiation anomalies in discrete areas. Additional applications outside of its educational usage are also discussed.

DNA nanomapping using CRISPR-Cas9 as a programmable nanoparticle.

Progress in whole-genome sequencing using short-read (e.g., <150 bp), next-generation sequencing technologies has reinvigorated interest in high-resolution physical mapping to fill technical gaps that are not well addressed by sequencing. Here, we report two technical advances in DNA nanotechnology and single-molecule genomics: (1) we describe a labeling technique (CRISPR-Cas9 nanoparticles) for high-speed AFM-based physical mapping of DNA and (2) the first successful demonstration of using DVD optics to image DNA molecules with high-speed AFM. As a proof of principle, we used this new "nanomapping" method to detect and map precisely BCL2-IGH translocations present in lymph node biopsies of follicular lymphoma patents. This HS-AFM "nanomapping" technique can be complementary to both sequencing and other physical mapping approaches.

Single Crystal, Luminescent Carbon Nitride Nanosheets Formed by Spontaneous Dissolution.

A primary method for the production of 2D nanosheets is liquid-phase delamination from their 3D layered bulk analogues. Most strategies currently achieve this objective by significant mechanical energy input or chemical modification but these processes are detrimental to the structure and properties of the resulting 2D nanomaterials. Bulk poly(triazine imide) (PTI)-based carbon nitrides are layered materials with a high degree of crystalline order. Here, we demonstrate that these semiconductors are spontaneously soluble in select polar aprotic solvents, that is, without any chemical or physical intervention. In contrast to more aggressive exfoliation strategies, this thermodynamically driven dissolution process perfectly maintains the crystallographic form of the starting material, yielding solutions of defect-free, hexagonal 2D nanosheets with a well-defined size distribution. This pristine nanosheet structure results in narrow, excitation-wavelength-independent photoluminescence emission spectra. Furthermore, by controlling the aggregation state of the nanosheets, we demonstrate that the emission wavelengths can be tuned from narrow UV to broad-band white. This has potential applicability to a range of optoelectronic devices.

Ionic solutions of two-dimensional materials.

Strategies for forming liquid dispersions of nanomaterials typically focus on retarding reaggregation, for example via surface modification, as opposed to promoting the thermodynamically driven dissolution common for molecule-sized species. Here we demonstrate the true dissolution of a wide range of important 2D nanomaterials by forming layered material salts that spontaneously dissolve in polar solvents yielding ionic solutions. The benign dissolution advantageously maintains the morphology of the starting material, is stable against reaggregation and can achieve solutions containing exclusively individualized monolayers. Importantly, the charge on the anionic nanosheet solutes is reversible, enables targeted deposition over large areas via electroplating and can initiate novel self-assembly upon drying. Our findings thus reveal a unique solution-like behaviour for 2D materials that enables their scalable production and controlled manipulation.

High-Speed Atomic Force Microscopy Revealing Contamination in DNA Purification Systems.

Motivated by reports of low-level DNA contamination in popular commercial DNA purification kits, we employed a novel high-speed atomic force microscopy (HS-AFM) method to detect and characterize particulate and polymeric contaminants in four such systems: Qiagen MinElute PCR Purification, Zymo Research DNA Clean and Concentrator-5, Invitrogen ChargeSwitch-Pro PCR Purification, and Beckman Coulter AMPure XP. HS-AFM avoids amplification artifacts present in PCR or in the sequencing of amplified products, and it requires no chemical labels and easily achieves near-single-molecule sensitivity. Using this technique, we found trace levels of filamentous contamination, similar in appearance to dsDNA, in eluates from the Zymo, Qiagen, and ChargeSwitch kits. Conversely, we detected no contaminants in magnetic bead-based AMPure XP solutions. Eluates from the Zymo kits also tested positive for DNA in fluorescent intercalator dye and whole genome amplification (WGA) assays. Qiagen kits tested positive in the fluorescence assay but negative in the WGA assay. Both ChargeSwitch and AMPure XP tested negative in the fluorescence assay while the WGA results for these two kits were ambiguous. Taken together, our findings suggest AMPure XP would be the best choice for analyses requiring very high analytical stringency. While HS-AFM alone does not provide chemical specificity, it is a potentially valuable tool for characterizing and quantifying trace contaminants in molecular biology reagents and instruments in cases where conventional techniques fail.