Steering carbon dioxide reduction toward C-C coupling using copper electrodes modified with porous molecular films.

Copper offers unique capability as catalyst for multicarbon compounds production in the electrochemical carbon dioxide reduction reaction. In lieu of conventional catalysis alloying with other elements, copper can be modified with organic molecules to regulate product distribution. Here, we systematically study to which extent the carbon dioxide reduction is affected by film thickness and porosity. On a polycrystalline copper electrode, immobilization of porous bipyridine-based films of varying thicknesses is shown to result in almost an order of magnitude enhancement of the intrinsic current density pertaining to ethylene formation while multicarbon products selectivity increases from 9.7 to 61.9%. In contrast, the total current density remains mostly unaffected by the modification once it is normalized with respect to the electrochemical active surface area. Supported by a microkinetic model, we propose that porous and thick films increase both local carbon monoxide partial pressure and the carbon monoxide surface coverage by retaining in situ generated carbon monoxide. This reroutes the reaction pathway toward multicarbon products by enhancing carbon-carbon coupling. Our study highlights the significance of customizing the molecular film structure to improve the selectivity of copper catalysts for carbon dioxide reduction reaction.

Dual-Responsive Material Based on Catechol-Modified Self-Immolative Poly(Disulfide) Backbones.

Functional materials engineered to degrade upon triggering are in high demand due their potentially lower impact on the environment as well as their use in sensing and in medical applications. Here, stimuli-responsive polymers are prepared by decorating a self-immolative poly(dithiothreitol) backbone with pendant catechol units. The highly functional polymer is fashioned into stimuli-responsive gels, formed through pH-dependent catecholato-metal ion cross-links. The gels degrade in response to specific environmental changes, either by addressing the pH responsive, non-covalent, catecholato-metal complexes, or by addition of a thiol. The latter stimulus triggers end-to-end depolymerization of the entire self-immolative backbone through end-cap replacement via thiol-disufide exchanges. Gel degradation is visualized by release of a dye from the supramolecular gel as it itself is converted into smaller molecules.

Polymer Brush Coating and Adhesion Technology at Scale.

Creating strong joints between dissimilar materials for high-performance hybrid products places high demands on modern adhesives. Traditionally, adhesion relies on the compatibility between surfaces, often requiring the use of primers and thick bonding layers to achieve stable joints. The coatings of polymer brushes enable the compatibilization of material surfaces through precise control over surface chemistry, facilitating strong adhesion through a nanometer-thin layer. Here, we give a detailed account of our research on adhesion promoted by polymer brushes along with examples from industrial applications. We discuss two fundamentally different adhesive mechanisms of polymer brushes, namely (1) physical bonding via entanglement and (2) chemical bonding. The former mechanism is demonstrated by e.g., the strong bonding between poly(methyl methacrylate) (PMMA) brush coated stainless steel and bulk PMMA, while the latter is shown by e.g., the improved adhesion between silicone and titanium substrates, functionalized by a hydrosilane-modified poly(hydroxyethyl methacrylate) (PHEMA) brush. This review establishes that the clever design of polymer brushes can facilitate strong bonding between metals and various polymer materials or compatibilize fillers or nanoparticles with otherwise incompatible polymeric matrices. To realize the full potential of polymer brush functionalized materials, we discuss the progress in the synthesis of polymer brushes under ambient and scalable industrial conditions, and present recent developments in atom transfer radical polymerization for the large-scale production of brush-modified materials.

Hydrosilane-Modified Poly(2-Hydroxyethyl Methacrylate) Brush as a Nanoadhesive for Efficient Silicone Bonding.

Leaching of chemicals from adhesion promoters is, in particular, problematic for the food, water, pharmaceutical, and MedTech industries where any chemical contamination is unacceptable. A solution to this issue is to employ covalently attached nanoscale polymer brushes as adhesive layers for plastics. One of the industrially most relevant adhesion targets in that respect is poly(dimethylsiloxane) (PDMS), being used for many high-end applications such as catheters and breast implants. In this work, we have synthesized a novel surface-immobilized poly(2-hydroxyethyl methacrylate)-based brush adhesive containing reactive hydrosilane groups that can bond directly to PDMS. Two different medical grades of addition-cured PDMS were molded on top of titanium substrates already coated with the polymer brush. Titanium plates were used for the chemical analysis, and titanium rods were used for adhesion testing. Adhesion testing revealed a high adhesive force, in which cohesive failure was observed in the bulk PDMS. The necessity of the hydrosilane group in the polymer brush adhesive layer was demonstrated in comparative studies using similar brushes lacking this functionality.

Correction to "Hydrosilane Modified Poly(2-Hydroxyethyl Methacrylate) Brush as a Nanoadhesive for Efficient Silicone Bonding".

[This corrects the article DOI: 10.1021/acsomega.9b01282.].

Highly Efficient Rubber-to-Stainless Steel Bonding by Nanometer-Thin Cross-linked Polymer Brushes.

Stainless steel (SS) surfaces were grafted with poly(glycidyl methacrylate) (PGMA) brushes that were post-modified using allylamine, diallylamine, and propylamine as reagents. Likewise, poly[2-(diethylamino)ethyl methacrylate] brushes were synthesized. All samples were compression molded with uncured ethylene-propylene-diene M-class rubber and dicumyl peroxide and vulcanized for 12 min at 170 °C. The efficiency of the novel bonding solution was evaluated through peel experiments. Two parameters, the fracture toughness () and the cohesive-to-adhesive fracture ratio (A r), were calculated to evaluate the strength and the performance of the coupling, respectively. For the nanometer-thin PGMA films modified with allylamine, in particular, full cohesive fracture was obtained. The obtained values of (15.4 ± 1.1 N mm-1) and A r (1.00 ± 0.01) matched those obtained for a micrometer-thick commercial bonding agent. Cross-linking of polymer brushes by intermolecular reactions by the primary amines proved to have a significant impact on the type of fracture (cohesive/adhesive) and the performance of the adhesives.

Graphene inclusion controlling conductivity and gas sorption of metal-organic framework.

A general approach to prepare composite films of metal-organic frameworks and graphene has been developed. Films of copper(ii)-based HKUST-1 and HKUST-1/graphene composites were grown solvothermally on glassy carbon electrodes. The films were chemically tethered to the substrate by diazonium electrografting resulting in a large electrode coverage and good stability in solution for electrochemical studies. HKUST-1 has poor electrical conductivity, but we demonstrate that the addition of graphene to HKUST-1 partially restores the electrochemical activity of the electrodes. The enhanced activity, however, does not result in copper(ii) to copper(i) reduction in HKUST-1 at negative potentials. The materials were characterised in-depth: microscopy and grazing incidence X-ray diffraction demonstrate uniform films of crystalline HKUST-1, and Raman spectroscopy reveals that graphene is homogeneously distributed in the films. Gas sorption studies show that both HKUST-1 and HKUST-1/graphene have a large CO2/N2 selectivity, but the composite has a lower surface area and CO2 adsorption capacity in comparison with HKUST-1, while CO2 binds stronger to the composite at low pressures. Electron paramagnetic resonance spectroscopy reveals that both monomeric and dimeric copper units are present in the materials, and that the two materials behave differently upon hydration, i.e. HKUST-1/graphene reacts slower by interaction with water. The changed gas/vapour sorption properties and the improved electrochemical activity are two independent consequences of combining graphene with HKUST-1.

Efficient Graphene Production by Combined Bipolar Electrochemical Intercalation and High-Shear Exfoliation.

In this study, we demonstrate that bipolar electrochemistry is a viable strategy for "wireless" electrochemical intercalation of graphite flakes and further large-scale production of high-quality graphene suspensions. Expansion of the graphite layers leads to a dramatic 20-fold increase in the yield of high-shear exfoliation. Large graphite flakes, which do not produce graphene upon high shear if left untreated, are exfoliated in a yield of 16.0 ± 0.2%. Successful graphene production was confirmed by Raman spectroscopy and scanning transmission electron microscopy, showing that the graphene flakes are 0.4-1.5 µm in size with the majority of flakes consisting of 4-6 graphene layers. Moreover, a low intensity of the D peak relative to the G peak as expressed by the I D/I G ratio in Raman spectroscopy along with high-resolution transmission electron microscopy images reveals that the graphene sheets are essentially undamaged by the electrochemical intercalation. Some impurities reside on the graphene after the electrochemical treatment, presumably because of oxidative polymerization of the solvent, as suggested by electron energy loss spectroscopy and X-ray photoelectron spectroscopy. In general, the bipolar electrochemical exfoliation method provides a pathway for intercalation on a wider range of graphite substrates and enhances the efficiency of the exfoliation. This method could potentially be combined with simultaneous electrochemical functionalization to provide graphene specifically designed for a given composite on a larger scale.

Hydrophilic Polymer Brush Layers on Stainless Steel Using Multilayered ATRP Initiator Layer.

Thin polymer coatings (in tens of nanometers to a micron thick) are desired on industrial surfaces such as stainless steel. In this thickness range coatings are difficult to produce using conventional methods. In this context, surface-initiated controlled polymerization method can offer a promising tool to produce thin polymer coatings via bottom-up approach. Furthermore, the industrial surfaces are chemically heterogeneous and exhibit surface features in the form of grain boundaries and grain surfaces. Therefore, the thin coatings must be equally effective on both the grain surfaces and the grain boundary regions. This study illustrates a novel "periodic rejuvenation of surface initiation" process using surface-initiated ATRP technique to amplify the graft density of poly(oligoethylene glycol)methacrylate (POEGMA) brush layers on stainless steel 316L surface. The optimized conditions demonstrate a controlled, macroscopically homogeneous, and stable POEGMA brush layer covering both the grain surface and the grain boundary region. Various relevant parameters-surface cleaning methods, controllability of thickness, graft density, homogeneity and stability-were studied using techniques such as ellipsometer, X-ray photoelectron spectroscopy, scanning electron microscopy-energy-dispersive X-ray, surface zeta potential, and infrared reflection-adsorption spectroscopy.

Improved adhesion between PMMA and stainless steel modified with PMMA brushes.

In this work, various lengths and densities of poly(methyl methacrylate) (PMMA) brushes were synthesized on stainless steel (SS) surfaces via surface initiated atom transfer radical polymerization. Subsequently, the joints between the bulk PMMA and the PMMA brushed stainless steel were obtained by injection molding, and for these the degree of adhesion was assessed by tensile testing. Several conditions are required to facilitate the mixing between the brushes and the bulk polymer and to reduce the residual stress at the interface: preheating of the SS samples before the injection molding; a long packing time; and a mold temperature above the glass transition temperature (Tg) of PMMA during the injection molding. This treatment leads to a cohesive failure in the bulk PMMA. It was observed that the stress concentrated at the rim, due to contraction of bulk PMMA during cooling, results in a weak adhesion at the rim of the joint. A combination of high density and long brush length of PMMA film provides better adhesion. The large number of PMMA brush chains apparently promotes good penetration into the bulk PMMA chains and ultimately results in high adhesion strength.

Superhydrophilic polyelectrolyte brush layers with imparted anti-icing properties: effect of counter ions.

This work demonstrates the feasibility of superhydrophilic polyelectrolyte brush coatings for anti-icing applications. Five different types of ionic and nonionic polymer brush coatings of 25-100 nm thickness were formed on glass substrates using silane chemistry for surface premodification followed by polymerization via the SI-ATRP route. The cationic [2-(methacryloyloxy)ethyl]trimethylammonium chloride] and the anionic [poly(3-sulfopropyl methacrylate), poly(sodium methacrylate)] polyelectrolyte brushes were further exchanged with H+, Li+, Na+, K+, Ag+, Ca2+, La3+, C16N+, F-, Cl-, BF4-, SO4(2-), and C12SO3- ions. By consecutive measurements of the strength of ice adhesion toward ion-incorporated polymer brushes on glass it was found that Li+ ions reduce ice adhesion by 40% at -18 °C and 70% at -10 °C. Ag+ ions reduce ice adhesion by 80% at -10 °C relative to unmodified glass. In general, superhydrophilic polyelectrolyte brushes exhibit better anti-icing property at -10 °C compared to partially hydrophobic brushes such as poly(methyl methacrylate) and surfactant exchanged polyelectrolyte brushes. The data are interpreted using the concept of a quasi liquid layer (QLL) that is enhanced in the presence of highly hydrated ions at the interface. It is suggested that the ability of ions to coordinate water is directly related to the efficiency of a given anti-icing coating based on the polyelectrolyte brush concept.

Electron transport through a diazonium-based initiator layer to covalently attached polymer brushes of ferrocenylmethyl methacrylate.

A versatile method based on electrografting of aryldiazonium salts was used to introduce covalently attached initiators for atom transfer radical polymerization (ATRP) on glassy carbon surfaces. Polymer brushes of ferrocenylmethyl methacrylate were prepared from the surface-attached initiators, and these films were thoroughly analyzed using various techniques, including X-ray photoelectron spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRRAS), ellipsometry, and electrochemistry. Of particular interest was the electrochemical characterization of the electron transfer through the diazonium-based initiator layer to the redox centers in the polymer brush films. It was found that the apparent rate constant of electron transfer decreases exponentially with the dry-state thickness of this layer. To investigate the electron transfer in the brushes themselves, scanning electrochemical microscopy (SECM) was applied, thereby allowing the effect from the initiator layer to be excluded. The unusual transition feature of the approach curves recorded suggests that an initial fast charge transfer to the outermost-situated ferrocenyl groups is followed by a slower electron transport involving the neighboring redox units.

Surface grafted glycopolymer brushes to enhance selective adhesion of HepG2 cells.

This work demonstrates the application of carbohydrate based methacrylate polymer brush, poly(2-lactobionamidoethyl methacrylate), for the purpose of cell adhesion studies. The first part of the work illustrates the effects of the structure of the aminosilane based ATRP initiator layer on the polymerization kinetics of 2-lactobionamidoethyl methacrylate) (LAMA) monomer on thermally oxidized silicon wafer. Both monolayer and multilayered aminosilane precursor layers have been prepared followed by reaction with 2-bromoisobutyrylbromide to form the ATRP initiator layer. It is inferred from the kinetic studies that the rate of termination is low on a multilayered initiator layer compared to a disordered monolayer structure. However both initiator types results in similar graft densities. Furthermore, it is shown that thick comb-like poly(LAMA) brushes can be constructed by initiating a second ATRP process on a previously formed poly(LAMA) brushes. The morphology of human hepatocellular carcinoma cancer cells (HepG2) on the comb-like poly(LAMA) brush layer has been studied. The fluorescent images of the HepG2 cells on the glycopolymer brush surface display distinct protrusions that extend outside of the cell periphery. On the other hand the cells on bare glass substrate display spheroid morphology. Further analysis using ToF-SIMS imaging shows that the HepG2 cells on glycopolymer surfaces is enriched with protein fragment along the cell periphery which is absent in the case of cells on bare glass substrate. It is suggested that the interaction of the galactose units of the polymer brush with the asialoglycoprotein receptor (ASGPR) of HepG2 cells has resulted in the protein enrichment along the cell periphery.

Synthesis of ß-cyclodextrin diazonium salts and electrochemical immobilization onto glassy carbon and gold surfaces.

This study shows that diazotized ß-cyclodextrin (ß-CD) can be produced, isolated, and immobilized onto glassy carbon and gold surfaces. 4-(1,2,3-Triazol-4-yl)benzenediazonium-ß-CD tetrafluoroborate (pDz-ß-CD) and 3-(1,2,3-triazol-4-yl)benzenediazonium-ß-CD tetrafluoroborate (mDz-ß-CD) were successfully prepared by Cu((I))-catalyzed azide alkyne coupling (CuAAC) of 6-monodeoxy-6-monoazido-ß-cyclodextrin (N(3)-ß-CD) and 4-ethynylaniline and 3-ethynylaniline, respectively, followed by diazotization. The products were isolated and stored successfully for several months at -18 °C. The intermediates and products were verified by Attenuated Total Reflectance Fourier Transform Infrared, Nuclear Magnetic Resonance, and Heteronuclear Single Quantum Coherence. pDz-ß-CD and mDz-ß-CD were immobilized onto glassy carbon and gold surfaces facilitated by electrochemical reduction of the diazonium group. The thus generated aryl radical reacted with the surface. The modified gold surfaces were investigated by Polarization Modulation Infrared Reflection Absorption Spectroscopy and cyclic voltammetry employing the redox probe K(3)Fe(CN)(6) to analyze the extent of blocking of the surfaces. Finally, the availability of the cavity of surface-immobilized ß-CD was shown by complexation of ferrocene followed by cyclic voltametric analysis.

Attractive double-layer forces and charge regulation upon interaction between electrografted amine layers and silica.

Amine functionalities have been introduced on glassy carbon surfaces through electrografting of 4-(2-aminoethyl)benzenediazonium tetrafluoroborate. The grafted layers were characterized by ellipsometry and by nanomechanical mapping in air and aqueous solutions using the atomic force microscopy PeakForce QNM mode. The layer was found to be 2.5 nm thick with low roughness, comparable to that of the glassy carbon substrate. However, small semi-spherical features were observed in the topographical image, indicating a clustering of the grafted amine compound. The nanomechanical mapping also demonstrated some swelling of the layer in water and pointed toward an important contribution of electrostatic interactions for the tip-surface adhesion. The forces between an aminated glassy carbon surface and a µm-sized silica particle in aqueous solutions were measured at different ionic strength and pH-values. The results demonstrate that an attractive double-layer force predominates at large separations, and that the surface charge densities increase as the separation between the surfaces decreases. The degree of charge regulation on the aminated glassy carbon is significant. The relatively low surface charge density of the aminated glassy carbon is attributed to significant incorporation of counterions in the water-rich grafted layer.

A practical electromediated ipso-hydroxylation of aryl and alkyl boronic acids under an air atmosphere.

An efficient electromediated aerobic ipso-hydroxylation reaction of aryl and alkyl boronic acids has been developed. Furthermore, mechanistic insight into the role of superoxide anions in this reaction has also been provided based on electrochemical studies and experimental results.

Elucidation of the mechanism of redox grafting of diazotated anthraquinone.

Redox grafting of aryldiazonium salts containing redox units may be used to form exceptionally thick covalently attached conducting films, even in the micrometers range, in a controlled manner on glassy carbon and gold substrates. With the objective to investigate the mechanism of this process in detail, 1-anthraquinone (AQ) redox units were immobilized on these substrates by electroreduction of 9,10-dioxo-9,10-dihydroanthracene-1-diazonium tetrafluoroborate. Electrochemical quartz crystal microbalance was employed to follow the grafting process during a cyclic voltammetric sweep by recording the frequency change. The redox grafting is shown to have two mass gain regions/phases: an irreversible one due to the addition of AQ units to the substrate/film and a reversible one due to the association of cations from the supporting electrolyte with the AQ radical anions formed during the sweeping process. Scanning electrochemical microscopy was used to study the relationship between the conductivity of the film and the charging level of the AQ redox units in the grafted film. For that purpose, approach curves were recorded at a platinum ultramicroelectrode for AQ-containing films on gold and glassy carbon surfaces using the ferro/ferricyanide redox system as redox probe. It is concluded that the film growth has its origin in electron transfer processes occurring through the layer mediated by the redox moieties embedded in the organic film.

Redox grafting of diazotated anthraquinone as a means of forming thick conducting organic films.

Thick conductive layers containing anthraquinone moieties are covalently immobilized on gold using redox grafting of the diazonium salt of anthraquinone (i.e., 9,10-dioxo-9,10-dihydroanthracene-1-diazonium tetrafluoroborate). This grafting procedure is based on using consecutive voltammetric sweeping and through this exploiting fast electron transfer reactions that are mediated by the anthraquinone redox moieties in the film. The fast film growth, which is followed by infrared reflection absorption spectroscopy, atomic force microscopy, X-ray photoelectron spectroscopy, ellipsometry, and coverage calculation, results in a mushroom-like structure. In addition to varying the number of sweeps, layer thickness control can easily be exerted through appropriate choice of the switching potential and sweep rate. It is shown that the grafting of the diazonium salt is essentially a diffusion-controlled process but also that desorption of physisorbed material during the sweeping process is essentially for avoiding blocking of the film due to clogging of the electrolyte channels in the film. In general, sweep rates higher than 0.5 V s(-1) are required if thick, porous, and conducting films should be formed.

Combining aryltriazenes and electrogenerated acids to create well-defined aryl-tethered films and patterns on surfaces.

Immobilization of submonolayers to 4-5 multilayers of organic molecules on carbon surfaces can be performed by in situ generation of aryl radicals from aryltriazenes. The central idea consists of oxidatively forming an electrogenerated acid of N,N'-diphenylhydrazine to convert the aryltriazene to the corresponding diazonium salt in the diffusion layer of the electrode. In a second step, the diazonium salt is reduced at the same electrode to give a surface of covalently attached aryl groups. In this manner, various moieties tethered to the aryl groups can be immobilized on the surface. Here a ferrocenyl group was introduced as redox marker, the electrochemical signal of which is extraordinarily well-defined. This behavior is independent of film thickness, the latter being easily controlled by the number of repetitive cycles performed. It is also demonstrated that the new approach is suitable for patterning of surfaces using scanning electrochemical microscopy.

On surface-initiated atom transfer radical polymerization using diazonium chemistry to introduce the initiator layer.

This work features the controllability of surface-initiated atom transfer radical polymerization (SI-ATRP) of methyl methacrylate, initiated by a multilayered 2-bromoisobutyryl moiety formed via diazonium chemistry. The thickness as a function of polymerization time has been studied by varying different parameters such as the bromine content of the initiator layer, polarity of reaction medium, ligand type (L), and the ratio of activator (Cu(I)) to deactivator (Cu(II)) in order to ascertain the controllability of the SI-ATRP process. The variation of thickness versus surface concentration of bromine shows a gradual transition from mushroom to brush-type conformation of the surface anchored chains in both polar and nonpolar reaction medium. Interestingly, it is revealed that very thick polymer brushes, on the order of 1 µm, can be obtained at high bromine content of the initiator layer in toluene. The initial polymerization rate and the overall final thickness are higher in the case of nonpolar solvent (toluene) compared to polar medium (acetonitrile or N,N-dimethylformamide). The ligand affects the initial rate of polymerization, which correlates with the redox potentials of the pertinent Cu(II)/Cu(I) complexes (L = Me(6)TREN, PMDETA, and BIPY). It is also observed that the ability of polymer brushes to reinitiate depends on the initial thickness and the solvent used for generating it.