Porous Agarose Layered Magnetic Graphene Oxide Nanocomposite for Virus RNA Monitoring in Wastewater.

The detection of virus RNA in wastewater has been established as a valuable method for monitoring Coronavirus disease 2019. Carbon nanomaterials hold potential application in separating virus RNA owing to their effective adsorption and extraction capabilities. However, carbon nanomaterials have limited separability under homogeneous aqueous conditions. Due to the stabilities in their nanostructure, it is a challenge to efficiently immobilize them onto magnetic beads for separation. Here, we develop a porous agarose layered magnetic graphene oxide (GO) nanocomposite that is prepared by agglutinating ferroferric oxide (Fe3O4) beads and GO with agarose into a cohesive whole. With an average porous size of approximately 500 nm, the porous structure enables the unhindered entry of virus RNA, facilitating its interaction with the surface of GO. Upon the application of a magnetic field, the nucleic acid can be separated from the solution within a few minutes, achieving adsorption efficiency and recovery rate exceeding 90% under optimized conditions. The adsorbed nucleic acid can then be preserved against complex sample matrix for 3 days, and quantitatively released for subsequent quantitative reverse transcription polymerase chain reaction (RT-qPCR) detection. The developed method was successfully utilized to analyze wastewater samples obtained from a wastewater treatment plant, detecting as few as 10 copies of RNA molecules per sample. The developed aMGO-RT-qPCR provides an efficient approach for monitoring viruses and will contribute to wastewater-based surveillance of community infections.

A Sensitive Technique Unravels the Kinetics of Activation and Trans-Cleavage of CRISPR-Cas Systems.

Activation of the CRISPR-Cas13a system requires the formation of a crRNA-Cas13a ribonucleoprotein (RNP) complex and the binding of an RNA activator to the RNP. These two binding processes play a crucial role in the performance of the CRISPR-Cas13a system. However, the binding kinetics remain poorly understood, and a main challenge is the lack of a sensitive method for real-time measurements of the dynamically formed active CRISPR-Cas13a enzyme. We describe here a new method to study the binding kinetics and report the rate constants (kon and koff) and dissociation constant (Kd) for the binding between Cas13a and its activator. The method is able to unravel and quantify the kinetics of binding and cleavage separately, on the basis of measuring the real-time trans-cleavage rates of the CRISPR-Cas system and obtaining the real-time concentrations of the active CRISPR-Cas ternary complex. We further discovered that once activated, the Cas13a system operates at a wide range of temperatures (7-37 °C) with fast trans-cleavage kinetics. The new method and findings are important for diverse applications of the Cas13a system, such as the demonstrated quantification of microRNA at ambient temperatures (e.g., 25 °C).

Entropy-Driven Three-Dimensional DNA Nanofireworks for Simultaneous Real-Time Imaging of Telomerase and MicroRNA in Living Cells.

Real-time monitoring of different types of intracellular tumor-related biomarkers is of key importance for the identification of tumor cells. However, it is hampered by the low abundance of biomarkers, inefficient free diffusion of reactants, and complex cytoplasmic milieu. Herein, we present a stable and general method for in situ imaging of microRNA-21 and telomerase utilizing simple highly integrated dual tetrahedral DNA nanostructures (TDNs) that can naturally enter cells, which could initiate to form the three-dimensional (3D) higher-order DNA superstructures (DNA nanofireworks, DNFs) through a reliable target-triggered entropy-driven strand displacement reaction in living cells for remarkable signal amplification. Importantly, the excellent biostability, biocompatibility, and sensitivity of this approach benefited from (i) the precise multidirectional arrangement of probes with a pure DNA structure and (ii) the local target concentration enhanced by the spatially confined microdomain inside the DNFs. This strategy provides a pivotal molecular toolbox for broad applications such as biomedical imaging and early precise cancer diagnosis.

DNAzyme motor systems and logic gates facilitated by toehold exchange translators.

DNAzyme motor systems using gold nanoparticles (AuNPs) as scaffolds are useful for biosensing and in situ amplification because these systems are free of protein enzymes, isothermal, homogeneous, and sensitive. However, detecting different targets using the available DNAzyme motor techniques requires redesigns of the DNAzyme motor. We report here a toehold-exchange translator and the translator-mediated DNAzyme motor systems, which enable sensitive responses to various nucleic acid targets using the same DNAzyme motor without requiring redesign. The translator is able to efficiently convert different nucleic acid targets into a specific output DNA that further activates the pre-silenced DNAzyme motor and consequently initiates the autonomous walking of the DNAzyme motor. Simply adjusting the target-binding region of the translator enables the same DNAzyme motor system to respond to various nucleic acid targets. The translator-mediated DNAzyme motor system is able to detect as low as 2.5 pM microRNA-10b and microRNA-21 under room temperature without the need of separation or washing. We further demonstrate the versatility of the translator and the DNAzyme motor by successful construction and operation of four logic gates, including OR, AND, NOR, and NAND logic gates. These logic gates use two microRNA targets as inputs and generate amplified fluorescence signals from the operation of the same DNAzyme motor. Incorporation of the toehold-exchange translator into the DNAzyme motor technology improves the biosensing applications of DNA motors to diverse nucleic acid targets.

Integrating Reverse Transcription Recombinase Polymerase Amplification with CRISPR Technology for the One-Tube Assay of RNA.

CRISPR-Cas systems integrated with nucleic acid amplification techniques improve both analytical specificity and sensitivity. We describe here issues and solutions for the successful integration of reverse transcription (RT), recombinase polymerase amplification (RPA), and CRISPR-Cas12a nuclease reactions into a single tube under an isothermal condition (40 °C). Specific detection of a few copies of a viral DNA sequence was achieved in less than 20 min. However, the sensitivity was orders of magnitude lower for the detection of viral RNA due to the slow initiation of RPA when the complementary DNA (cDNA) template remained hybridized to RNA. During the delay of RPA, the crRNA-Cas12a ribonucleoprotein (RNP) gradually lost its activity in the RPA solution, and nonspecific amplification reactions consumed the RPA reagents. We overcame these problems by taking advantage of the endoribonuclease function of RNase H to remove RNA from the RNA-cDNA hybrids and free the cDNA as template for the RPA reaction. As a consequence, we significantly enhanced the overall reaction rate of an integrated assay using RT-RPA and CRISPR-Cas12a for the detection of RNA. We showed successful detection of 200 or more copies of the S gene sequence of SARS-CoV-2 RNA within 5-30 min. We applied our one-tube assay to 46 upper respiratory swab samples for COVID-19 diagnosis, and the results from both fluorescence intensity measurements and end-point visualization were consistent with those of RT-qPCR analysis. The strategy and technique improve the sensitivity and speed of RT-RPA and CRISPR-Cas12a assays, potentially useful for both semi-quantitative and point-of-care analyses of RNA molecules.

CRISPR technology incorporating amplification strategies: molecular assays for nucleic acids, proteins, and small molecules.

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) and CRISPR-associated (Cas) protein systems have transformed the field of genome editing and transcriptional modulation. Progress in CRISPR-Cas technology has also advanced molecular detection of diverse targets, ranging from nucleic acids to proteins. Incorporating CRISPR-Cas systems with various nucleic acid amplification strategies enables the generation of amplified detection signals, enrichment of low-abundance molecular targets, improvements in analytical specificity and sensitivity, and development of point-of-care (POC) diagnostic techniques. These systems take advantage of various Cas proteins for their particular features, including RNA-guided endonuclease activity, sequence-specific recognition, multiple turnover trans-cleavage activity of Cas12 and Cas13, and unwinding and nicking ability of Cas9. Integrating a CRISPR-Cas system after nucleic acid amplification improves detection specificity due to RNA-guided recognition of specific sequences of amplicons. Incorporating CRISPR-Cas before nucleic acid amplification enables enrichment of rare and low-abundance nucleic acid targets and depletion of unwanted abundant nucleic acids. Unwinding of dsDNA to ssDNA using CRISPR-Cas9 at a moderate temperature facilitates techniques for achieving isothermal exponential amplification of nucleic acids. A combination of CRISPR-Cas systems with functional nucleic acids (FNAs) and molecular translators enables the detection of non-nucleic acid targets, such as proteins, metal ions, and small molecules. Successful integrations of CRISPR technology with nucleic acid amplification techniques result in highly sensitive and rapid detection of SARS-CoV-2, the virus that causes the COVID-19 pandemic.

Binding-Mediated Formation of Ribonucleoprotein Corona for Efficient Delivery and Control of CRISPR/Cas9.

Protein coronae formed with nanoparticles confer several useful properties. However, the non-specific nature of protein corona formation makes it difficult to deliver specific proteins for therapeutic applications. Herein, we report on the construction of a new type of protein corona, termed binding-mediated protein corona. This new corona enables the efficient and controllable delivery of functional proteins, which is otherwise challenging for conventional protein coronae. We show the design and delivery of the ribonucleoprotein corona for the CRISPR/Cas9 system. Successful gene editing in human cell lines (Hela and HEK293) demonstrates the efficient delivery, high stability, low cytotoxicity, and well-controlled activity of the Cas9-guide RNA ribonucleoprotein. The binding-mediated protein corona strategy opens up new opportunities for therapeutic protein delivery.

Isothermal Amplification and Ambient Visualization in a Single Tube for the Detection of SARS-CoV-2 Using Loop-Mediated Amplification and CRISPR Technology.

We have developed a single-tube assay for SARS-CoV-2 in patient samples. This assay combined advantages of reverse transcription (RT) loop-mediated isothermal amplification (LAMP) with clustered regularly interspaced short palindromic repeats (CRISPRs) and the CRISPR-associated (Cas) enzyme Cas12a. Our assay is able to detect SARS-CoV-2 in a single tube within 40 min, requiring only a single temperature control (62 °C). The RT-LAMP reagents were added to the sample vial, while CRISPR Cas12a reagents were deposited onto the lid of the vial. After a half-hour RT-LAMP amplification, the tube was inverted and flicked to mix the detection reagents with the amplicon. The sequence-specific recognition of the amplicon by the CRISPR guide RNA and Cas12a enzyme improved specificity. Visible green fluorescence generated by the CRISPR Cas12a system was recorded using a smartphone camera. Analysis of 100 human respiratory swab samples for the N and/or E gene of SARS-CoV-2 produced 100% clinical specificity and no false positive. Analysis of 50 samples that were detected positive using reverse transcription quantitative polymerase chain reaction (RT-qPCR) resulted in an overall clinical sensitivity of 94%. Importantly, this included 20 samples that required 30-39 threshold cycles of RT-qPCR to achieve a positive detection. Integration of the exponential amplification ability of RT-LAMP and the sequence-specific processing by the CRISPR-Cas system into a molecular assay resulted in improvements in both analytical sensitivity and specificity. The single-tube assay is beneficial for future point-of-care applications.

Aptamer binding assays and molecular interaction studies using fluorescence anisotropy - A review.

Binding of nucleic acid aptamers to specific targets and detection with fluorescence anisotropy (FA) or fluorescence polarization (FP) take advantage of the complementary features of aptamers and the fluorescence techniques. We review recent advances in affinity binding assays using aptamers and FA/FP, with an emphasis on studies of molecular interactions and identification of binding sites. Aptamers provide several benefits, including the ease of labelling fluorophores on specific sites, binding-induced changes in aptamer structures, hybridization of the aptamers to complementary sequences, changes in molecular volume upon binding of the aptamer to its target, and adsorption of aptamers onto nanomaterials. Some of these benefits have been utilized for FA/FP assays. Once the aptamer binds to its target, the resulting changes in molecular volume (size), structure, local rotation of the fluorophore, and/or the fluorescence lifetime influence changes to the FA/FP values. Measurements of these fluorescence anisotropy/polarization changes have provided insights into the molecular interactions, such as the binding affinity and the site of binding. Studies of molecular interactions conducted in homogeneous solutions, as well as those with separations, e.g., capillary electrophoresis, have been summarized in this review. Studies on mapping the position of binding in aptamers at the single nucleotide level have demonstrated a unique benefit of the FA/FP techniques and pointed to an exciting direction for future research.

Molecular Diagnosis of COVID-19: Challenges and Research Needs.

Molecular diagnosis of COVID-19 primarily relies on the detection of RNA of the SARS-CoV-2 virus, the causative infectious agent of the pandemic. Reverse transcription polymerase chain reaction (RT-PCR) enables sensitive detection of specific sequences of genes that encode the RNA dependent RNA polymerase (RdRP), nucleocapsid (N), envelope (E), and spike (S) proteins of the virus. Although RT-PCR tests have been widely used and many alternative assays have been developed, the current testing capacity and availability cannot meet the unprecedented global demands for rapid, reliable, and widely accessible molecular diagnosis. Challenges remain throughout the entire analytical process, from the collection and treatment of specimens to the amplification and detection of viral RNA and the validation of clinical sensitivity and specificity. We highlight the main issues surrounding molecular diagnosis of COVID-19, including false negatives from the detection of viral RNA, temporal variations of viral loads, selection and treatment of specimens, and limiting factors in detecting viral proteins. We discuss critical research needs, such as improvements in RT-PCR, development of alternative nucleic acid amplification techniques, incorporating CRISPR technology for point-of-care (POC) applications, validation of POC tests, and sequencing of viral RNA and its mutations. Improved assays are also needed for environmental surveillance or wastewater-based epidemiology, which gauges infection on the community level through analyses of viral components in the community's wastewater. Public health surveillance benefits from large-scale analyses of antibodies in serum, although the current serological tests do not quantify neutralizing antibodies. Further advances in analytical technology and research through multidisciplinary collaboration will contribute to the development of mitigation strategies, therapeutics, and vaccines. Lessons learned from molecular diagnosis of COVID-19 are valuable for better preparedness in response to other infectious diseases.

A Genome-Editing Nanomachine Constructed with a Clustered Regularly Interspaced Short Palindromic Repeats System and Activated by Near-Infrared Illumination.

The RNA-guided CRISPR/Cas9 system is a powerful genome-editing technology with broad applications. Improving delivery efficiency and controllable activity of the CRISPR/Cas9 system is an area of intense research. We report the design, construction, and application of a CRISPR/Cas9 nanomachine (LACM), activated by a near-infrared (NIR) laser, which enables efficient delivery of single-guide RNA (sgRNA) into living cells and achieves controlled release of the sgRNA for the CRISPR/Cas9 activity. The LACM was constructed using a gold nanorod (AuNR) as a carrier that was decorated with dozens of protector DNAs stably hybridizing with the target binding domain of sgRNA. The DNA assembly on the AuNR protected the sgRNA. Irradiation with a NIR laser generated heat on the AuNR, resulting in controlled release of sgRNA, which guided the CRISPR/Cas9 genome editing. Successful editing of the EGFP and EMX1 genes in A549 and HEK293T cells, as well as knocking down of the PLK1 gene to induce apoptosis of the target cells, highlights the promising potential of the LACM for diverse applications.

Biotransformation of arsenic-containing roxarsone by an aerobic soil bacterium Enterobacter sp. CZ-1.

Roxarsone (3-nitro-4-hydroxyphenylarsonic acid, ROX) is an arsenic-containing compound widely used as a feed additive in poultry industries. ROX excreted in chicken manure can be transformed by microbes to different arsenic species in the environment. To date, most of the studies on microbial transformation of ROX have focused on anaerobic microorganisms. Here, we isolated a pure cultured aerobic ROX-transforming bacterial strain, CZ-1, from an arsenic-contaminated paddy soil. On the basis of 16S rRNA gene sequence, strain CZ-1 was classified as a member of the genus Enterobacter. During ROX biotransformation by strain CZ-1, five metabolites including arsenate (As[V]), arsenite (As[III]), N-acetyl-4-hydroxy-m-arsanilic acid (N-AHPAA), 3-amino-4-hydroxyphenylarsonic acid (3-AHPAA) and a novel sulfur-containing arsenic species (AsC9H13N2O6S) were detected and identified based on high-performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS), HPLC-ICP-MS/electrospray ionization mass spectrometry (ESI-MS) and HPLC-electrospray ionization hybrid quadrupole time-of-flight mass spectrometry (ESI-qTOF-MS) analyses. N-AHPAA and 3-AHPAA were the main products, and 3-AHPAA could also be transformed to N-AHPAA. Based on the results, we propose a novel ROX biotransformation pathway by Enterobacter. sp CZ-1, in which the nitro group of ROX is first reduced to amino group (3-AHPAA) and then acetylated to N-AHPAA.

Binding-Induced DNA Dissociation Assay for Small Molecules: Sensing Aflatoxin B1.

We describe a new fluorescence turn-on sensor for homogeneous detection of aflatoxin B1 (AFB1), a potent low molecular weight mycotoxin. A key innovation is the binding-induced intramolecular interaction involving the following two sets of probes: (1) a gold nanoparticle (AuNP) immobilized with hundreds of assistant oligonucleotides (AO) and dozens of anti-AFB1 monoclonal antibodies, and (2) the AFB1-BSA (BSA = bovine serum albumin) antigen conjugated with fluorophore-labeled signal oligonucleotides (SO) that contained a short sequence complementary to AO. Specific binding of AFB1-BSA to the antibody brought the fluorophore very close to the surface of the AuNP through a stable intramolecular hybridization between AO and SO, resulting in efficient quenching of fluorescence. The improved fluorescence quenching substantially reduced the background, due to the binding-induced intramolecular hybridization, and improved the signal-to-background ratio by 390%. In the presence of AFB1 in a sample, competitive binding of AFB1 in the sample to the antibodies immobilized on the AuNP caused the release of the fluorophore-labeled AFB1-BSA from the AuNP, turning on fluorescence. A detection limit of 2.3 nM was achieved, which meets the requirement for AFB1 detection at regulatory levels. Analyses of rice samples using this assay showed recoveries of 86-102%. Incorporating appropriate antibody probes could extend the assay to the detection of other small molecules.

Quantitative synthesis of protein-DNA conjugates with 1 : 1 stoichiometry.

We describe here a binding-facilitated reaction strategy, enabling quantitative conjugation of DNA to native proteins with a desirable 1 : 1 stoichiometry. The technique takes advantage of the iterative affinity interaction and covalent binding processes to achieve complete conjugation. The complete conjugation obviates the need for separation of the protein-DNA conjugates as required by other DNA-protein conjugation methods.

A Target-Triggered DNAzyme Motor Enabling Homogeneous, Amplified Detection of Proteins.

We report here the concept of a self-powered, target-triggered DNA motor constructed by engineering a DNAzyme to adapt into binding-induced DNA assembly. An affinity ligand was attached to the DNAzyme motor via a DNA spacer, and a second affinity ligand was conjugated to the gold nanoparticle (AuNP) that was also decorated with hundreds of substrate strands serving as a high-density, three-dimensional track for the DNAzyme motor. Binding of a target molecule to the two ligands induced hybridization between the DNAzyme and its substrate on the AuNP, which are otherwise unable to spontaneously hybridize. The hybridization of DNAzyme with the substrate initiates the cleavage of the substrate and the autonomous movement of the DNAzyme along the AuNP. Each moving step restores the fluorescence of a dye molecule, enabling monitoring of the operation of the DNAzyme motor in real time. A simple addition or depletion of the cofactor Mg2+ allows for fine control of the DNAzyme motor. The motor can translate a single binding event into cleavage of hundreds of substrates, enabling amplified detection of proteins at room temperature without the need for separation.

Methylated Phenylarsenical Metabolites Discovered in Chicken Liver.

We report the discovery of three toxicologically relevant methylated phenylarsenical metabolites in the liver of chickens fed 3-nitro-4-hydroxyphenylarsonic acid (ROX), a feed additive in poultry production that is still in use in several countries. Methyl-3-nitro-4-hydroxyphenylarsonic acid (methyl-ROX), methyl-3-amino-4-hydroxyphenylarsonic acid (methyl-3-AHPAA), and methyl-3-acetamido-4-hydroxyphenylarsonic acid (or methyl-N-acetyl-ROX, methyl-N-AHPAA) were identified in such chicken livers, and the concentration of methyl-ROX was as high as 90 µg kg-1 , even after a five-day clearance period. The formation of these newly discovered methylated metabolites from reactions involving trivalent phenylarsonous acid substrates, S-adenosylmethionine, and the arsenic (+3 oxidation state) methyltransferase enzyme As3MT suggests that these compounds are formed by addition of a methyl group to a trivalent phenylarsenical substrate in an enzymatic process. The IC50 values of the trivalent phenylarsenical compounds were 300-30 000 times lower than those of the pentavalent phenylarsenicals.