RESUMEN
Noble gas xenon (Xe) is an excellent anesthetic gas, but its rarity, high cost and constrained production prohibits wide use in medicine. Here, we have developed a closed-circuit anesthetic Xe recovery and reusage process with highly effective CO2-specific adsorbent CUPMOF-5 that is promising to solve the anesthetic Xe supply problem. CUPMOF-5 possesses spacious cage cavities interconnected in four directions by confinement throat apertures of ~3.4â Å, which makes it an ideal molecular sieving of CO2 from Xe, O2, N2 with the benchmark selectivity and high uptake capacity of CO2. In situ single-crystal X-ray diffraction (SCXRD) and computational simulation solidly revealed the vital sieving role of the confined throat and the sorbent-sorbate induced-fit strengthening binding interaction to CO2. CUPMOF-5 can remove 5 % CO2 even from actual moist exhaled anesthetic gases, and achieves the highest Xe recovery rate (99.8 %) so far, as verified by breakthrough experiments. This endows CUPMOF-5 great potential for the on-line CO2 removal and Xe recovery from anesthetic closed-circuits.
RESUMEN
Compared to the currently widely used propane dehydrogenation process for propylene production, propane oxidative dehydrogenation (ODHP) offers the advantage of no thermodynamic limitations and lower energy consumption. However, a major challenge in ODHP is the occurrence of undesired over-oxidation reactions of propylene, which reduce selectivity and hinder industrialization. MOFs possess a large number of metal sites that can serve as catalytic centers, which facilitates the easier access of reactants to the catalytic centers for reaction. Additionally, their flexible framework structure allows for easier adjustment of their pores compared to metal oxides and molecular sieves, which is advantageous for the diffusion of products within the framework. This property reduces the likelihood of prolonged contact between the generated propylene and the catalytic centers, thus minimizing the possibility of over-oxidation. The research on MOF catalyzed oxidative dehydrogenation of propane (ODHP) mainly focuses on the catalytic properties of MOFs with cobalt oxygen sites and boron oxygen sites. The advantages of cobalt oxygen site MOFs include significantly reduced energy consumption, enabling catalytic reactions at temperatures of 230 °C and below, while boron oxygen site MOFs exhibit high conversion rates and selectivity, albeit requiring higher temperatures. The explicit structure of MOFs facilitates the mechanistic study of these sites, enabling further optimization of catalysts. This paper provides an overview of the recent progress in utilizing MOFs as catalysts for ODHP and explores how they promote progress in ODHP catalysis. Finally, the challenges and future prospects of MOFs in the field of ODHP reactions are discussed.
RESUMEN
Propane (C3H8) is a widely used fuel gas. Metal-organic framework (MOF) physisorbents that are C3H8 selective offer the potential to significantly reduce the energy footprint for capturing C3H8 from natural gas, where C3H8 is typically present as a minor component. Here we report the C3H8 recovery performance of a previously unreported lonsdaleite, lon, topology MOF, a chiral metal-organic material, [Ni(S-IEDC)(bipy)(SCN)]n, CMOM-7. CMOM-7 was prepared from three low-cost precursors: Ni(SCN)2, S-indoline-2-carboxylic acid (S-IDECH), and 4,4'-bipyridine (bipy), and its structure was determined by single crystal X-ray crystallography. Pure gas adsorption isotherms revealed that CMOM-7 exhibited high C3H8 uptake (2.71 mmol g-1) at 0.05 bar, an indication of a higher affinity for C3H8 than both C2H6 and CH4. Dynamic column breakthrough experiments afforded high purity C3H8 capture from a gas mixture comprising C3H8/C2H6/CH4 (v/v/v = 5/10/85). Despite the dilute C3H8 stream, CMOM-7 registered a high dynamic uptake of C3H8 and a breakthrough time difference between C3H8 and C2H6 of 79.5 min g-1, superior to those of previous MOF physisorbents studied under the same flow rate. Analysis of crystallographic data and Grand Canonical Monte Carlo simulations provides insight into the two C3H8 binding sites in CMOM-7, both of which are driven by C-H···π and hydrogen bonding interactions.
RESUMEN
Gas hydrates provide alternative solutions for gas storage & transportation and gas separation. However, slow formation rate of clathrate hydrate has hindered their commercial development. Here we report a form of porous ice containing an unfrozen solution layer of sodium dodecyl sulfate, here named active ice, which can significantly accelerate gas hydrate formation while generating little heat. It can be readily produced via forming gas hydrates with water containing very low dosage (0.06 wt% or 600 ppm) of surfactant like sodium dodecyl sulfate and dissociating it below the ice point, or by simply mixing ice powder or natural snow with the surfactant. We prove that the active ice can rapidly store gas with high storage capacity up to 185 Vg Vw-1 with heat release of ~18 kJ mol-1 CH4 and the active ice can be easily regenerated by depressurization below the ice point. The active ice undergoes cyclic ice-hydrate-ice phase changes during gas uptake/release, thus removing most critical drawbacks of hydrate-based technologies. Our work provides a green and economic approach to gas storage and gas separation and paves the way to industrial application of hydrate-based technologies.
RESUMEN
Chiral metal-organic materials (CMOMs), can offer molecular binding sites that mimic the enantioselectivity exhibited by biomolecules and are amenable to systematic fine-tuning of structure and properties. Herein, we report that the reaction of Ni(NO3)2, S-indoline-2-carboxylic acid (S-IDECH), and 4,4'-bipyridine (bipy) afforded a homochiral cationic diamondoid, dia, network, [Ni(S-IDEC)(bipy)(H2O)][NO3], CMOM-5. Composed of rod building blocks (RBBs) cross-linked by bipy linkers, the activated form of CMOM-5 adapted its pore structure to bind four guest molecules, 1-phenyl-1-butanol (1P1B), 4-phenyl-2-butanol (4P2B), 1-(4-methoxyphenyl)ethanol (MPE), and methyl mandelate (MM), making it an example of a chiral crystalline sponge (CCS). Chiral resolution experiments revealed enantiomeric excess, ee, values of 36.2-93.5%. The structural adaptability of CMOM-5 enabled eight enantiomer@CMOM-5 crystal structures to be determined. The five ordered crystal structures revealed that host-guest hydrogen-bonding interactions are behind the observed enantioselectivity, three of which represent the first crystal structures determined of the ambient liquids R-4P2B, S-4P2B, and R-MPE.
RESUMEN
Development of high-performance materials for the capture and separation of CO2 from the gas mixture is significant to alleviate carbon emission and mitigate the greenhouse effect. In this work, a novel structure of C9N7 slit was developed to explore its CO2 adsorption capacity and selectivity using Grand Canonical Monte Carlo (GCMC) and Density Functional Theory (DFT) calculations. Among varying slit widths, C9N7 with the slit width of 0.7 nm exhibited remarkable CO2 uptake with superior CO2/N2 and CO2/CH4 selectivity. At 1 bar and 298 K, a maximum CO2 adsorption capacity can be obtained as high as 7.06 mmol/g, and the selectivity of CO2/N2 and CO2/CH4 was 41.43 and 18.67, respectively. In the presence of H2O, the CO2 uptake of C9N7 slit decreased slightly as the water content increased, showing better water tolerance. Furthermore, the underlying mechanism of highly selective CO2 adsorption and separation on the C9N7 surface was revealed. The closer the adsorption distance, the stronger the interaction energy between the gas molecule and the C9N7 surface. The strong interaction between the C9N7 nanosheet and the CO2 molecule contributes to its impressive CO2 uptake and selectivity performance, suggesting that the C9N7 slit could be a promising candidate for CO2 capture and separation.
RESUMEN
Gas separation performances are usually degraded under humid conditions for many crystalline porous materials because of the lack of water stability and/or the competition of water vapor toward the interaction sites (e.g., open metal sites). Zeolitic imidazolate frameworks (ZIFs) are suitable candidates for practical applications in gas separation because of their excellent physical/chemical stabilities. However, the limitation of substituent positions in common ZIFs has prevented extensive pore engineering to improve their separation performance. In a type of gyroidal ZIFs with gie topology, the Schiff base moiety provides additional substituent positions, making it possible to modify the spatial arrangement of hydrophobic methyl groups. Herein, a new gyroidal ZIF, ZnBAIm (H2BAIm = 1,2-bis(1-(1H-imidazol-4-yl)ethylidene)hydrazine), is designed, synthesized, and characterized. The spatially modified ZnBAIm exhibits improved thermal/chemical/mechanical stabilities compared to ZnBIm (H2BIm = 1,2-bis((5H-imidazol-4-yl)methylene)hydrazine). ZnBAIm can remain intact up to about 480 °C in a N2 atmosphere and tolerate harsh treatments (e.g., 5 M NaOH aqueous solution at room temperature for 24 h and 190 MPa high pressure in the presence of water). Moreover, the modified pore and window sizes have improved significantly the ethane/ethylene selectivity and separation performance under humid conditions for ZnBAIm. Breakthrough experiments demonstrate efficient separation of a C2H6/C2H4 (50/50, v/v) binary gas mixture under ambient conditions; more importantly, the C2H6/C2H4 separation performance is unaffected under highly humid conditions (up to 80% RH). The separation performance is attributed to combined thermodynamic (stronger dispersion interaction with C2H6 than with C2H4) and kinetic factors (diffusion), determined by density functional theory calculations and kinetic adsorption study, respectively.
RESUMEN
Photocatalysis is a powerful and versatile tool widely applied in the areas of synthesis chemistry. However, most of the photocatalysts currently used are homogeneous catalysts, which inevitably face issues such as product-catalyst separation and recyclability. Addressing this challenge, we utilized a homogeneous Ru photocatalyst as a structure-directing template to fabricate a series of isostructural photocatalyst-encapsulating metal-organic frameworks (photocatalyst@MOFs) with high porosity, robustness, and photocatalyst loading. The regular channels of MOF can disperse the encapsulated photocatalysts, promote the mass transfer of substrates and products, and provide an outstanding substrate confinement effect, thereby dramatically improving the catalytic activity and excellent recyclability toward valuable organic reactions. For instance, the MOF photocatalysts can catalyze the asymmetric Mannich reaction with ketones with high yields and excellent enantioselectivities (up to 99% ee), better than the reported photocatalyst. Significantly, this was the first case that heterogeneous MOF-based photocatalyst can catalyze the asymmetric Mannich reaction without cocatalysts under room temperature and visible light. This work not only explores an avenue to prepare heterogeneous photocatalysts but also broadens the application scope of MOF-based photocatalysts.
RESUMEN
Selective separation of propyne/propadiene mixture to obtain pure propadiene (allene), an essential feedstock for organic synthesis, remains an unsolved challenge in the petrochemical industry, thanks mainly to their similar physicochemical properties. We herein introduce a convenient and energy-efficient physisorptive approach to achieve propyne/propadiene separation using microporous metal-organic frameworks (MOFs). Specifically, HKUST-1, one of the most widely studied high surface area MOFs that is available commercially, is found to exhibit benchmark performance (propadiene production up to 69.6 cm3/g, purity > 99.5%) as verified by dynamic breakthrough experiments. Experimental and modeling studies provide insight into the performance of HKUST-1 and indicate that it can be attributed to a synergy between thermodynamics and kinetics that arises from abundant open metal sites and cage-based molecular traps in HKUST-1.
RESUMEN
Noble gases, especially krypton (Kr) and xenon (Xe), are widely applied in diverse fields. Developing new techniques and adsorbents to separate and purify Kr and Xe is in high demand. Herein, we reported a bimetallic metal-organic framework (MOF) (NKMOF-1-Ni) which possesses a narrow pore size (5.36 Å) and ultrahigh stability (e.g., stable in water for 1.5 years). Gas sorption measurements revealed that this MOF possessed much higher uptake for Xe than for Kr, Ar, or N2 at room temperature in all pressure ranges. The calculation of adsorption isosteric heat and Grand Canonical Monte Carlo simulation verified that NKMOF-1-Ni had a stronger interaction with Xe than other tested gases. The results of ideal adsorbed solution theory selectivity and simulated breakthrough further showed that NKMOF-1-Ni had an outstanding separation performance of Xe/Kr, Xe/Ar, and Xe/N2. This study provides important guidance for future research to synthesize ideal sorbents to separate noble gases.
RESUMEN
In the evolution of metal-organic frameworks (MOFs) for carbon capture, a lasting challenge is to strike a balance between high uptake capacity/selectivity and low energy cost for regeneration. Meanwhile, these man-made materials have to survive from practical demands such as stability under harsh conditions and feasibility of scale-up synthesis. Reported here is a new MOF, Zn(imPim) (aka. MAF-stu-1), with an imidazole derivative ligand, featuring binding pockets that can accommodate CO2 molecules in a fit-like-a-glove manner. Such a high degree of shape complementarity allows direct observation of the loaded CO2 in the pockets, and warrants its optimal carbon capture performances exceeding the best-performing MOFs nowadays. Coupled with the record thermal (up to 680 °C) and chemical stability, as well as rapid large-scale production, both encoded in the material design, Zn(imPim) represents a most competitive candidate to tackle the immediate problems of carbon dioxide capture.
RESUMEN
Simultaneous removal of trace amounts of propyne and propadiene from propylene is an important but challenging industrial process. We report herein a class of microporous metal-organic frameworks (NKMOF-1-M) with exceptional water stability and remarkably high uptakes for both propyne and propadiene at low pressures. NKMOF-1-M separated a ternary propyne/propadiene/propylene (0.5 : 0.5 : 99.0) mixture with the highest reported selectivity for the production of polymer-grade propylene (99.996 %) at ambient temperature, as attributed to its strong binding affinity for propyne and propadiene over propylene. Moreover, we were able to visualize propyne and propadiene molecules in the single-crystal structure of NKMOF-1-M through a convenient approach under ambient conditions, which helped to precisely understand the binding sites and affinity for propyne and propadiene. These results provide important guidance on using ultramicroporous MOFs as physisorbent materials.
RESUMEN
Highly selective separation and/or purification of acetylene from various gas mixtures is a relevant and difficult challenge that currently requires costly and energy-intensive chemisorption processes. Two ultramicroporous metal-organic framework physisorbents, NKMOF-1-M (M=Cu or Ni), offer high hydrolytic stability and benchmark selectivity towards acetylene versus several gases at ambient temperature. The performance of NKMOF-1-M is attributed to their exceptional acetylene binding affinity as revealed by modelling and several experimental studies: inâ situ single-crystal X-ray diffraction, FTIR, and gas mixture breakthrough tests. NKMOF-1-M exhibit better low-pressure uptake than existing physisorbents and possesses the highest selectivities yet reported for C2 H2 /CO2 and C2 H2 /CH4 . The performance of NKMOF-1-M is not driven by the same mechanism as current benchmark physisorbents that rely on pore walls lined by inorganic anions.
RESUMEN
A molecular spring formed by a hydrophobic metal-organic framework Cu2 (tebpz) (tebpz=3,3',5,5'-tetraethyl-4,4'-bipyrazolate) and water is presented. This nanoporous heterogeneous lyophobic system (HLS) has exceptional properties compared to numerous reported systems of such type in terms of stability, efficiency, and operating pressure. Mechanical and thermal energetic characteristics as well as stability of the system are discussed and compared in detail with those of other previously reported HLS.
RESUMEN
The Akt signaling pathway plays a key role in promoting the survival of various types of cells from stress-induced apoptosis, and different members of the Akt family display distinct physiological roles. Previous studies have shown that in response to UV irradiation, Akt2 is sensitized to counteract the induced apoptosis. However, in response to oxidative stress such as hydrogen peroxide, it remains to be elucidated what member of the Akt family would be activated to initiate the signaling cascades leading to resistance of the induced apoptosis. In the present study, we present the first evidence that knockdown of Akt1 enhances cell survival under exposure to 50 µM H(2)O(2). This survival is derived from selective upregulation and activation of Akt2 but not Akt3, which initiates 3 major signaling cascades. First, murine double minute 2 (MDM2) is hyperphosphorylated, which promotes p53 degradation and attenuates its Ser-15 phosphorylation, significantly attenuating Bcl-2 homologous antagonist killer (Bak) upregulation. Second, Akt2 activation inactivates glycogen synthase kinase 3 beta (GSK-3ß) to promote stability of myeloid leukemia cell differentiation protein 1 (MCL-1). Finally, Akt2 activation promotes phosphorylation of FOXO3A toward cytosolic export and thus downregulates Bim expression. Overexpression of Bim enhances H(2)O(2)-induced apoptosis. Together, our results demonstrate that among the Akt family members, Akt2 is an essential kinase in counteracting oxidative-stress-induced apoptosis through multiple signaling pathways.
Asunto(s)
Proteínas Proto-Oncogénicas c-akt/genética , Proteínas Proto-Oncogénicas c-akt/metabolismo , Transducción de Señal/efectos de los fármacos , Animales , Apoptosis/efectos de los fármacos , Proteínas de Ciclo Celular , Línea Celular , Supervivencia Celular/efectos de los fármacos , Proteínas de Unión al ADN , Femenino , Proteína Forkhead Box O3 , Factores de Transcripción Forkhead/genética , Factores de Transcripción Forkhead/metabolismo , Técnicas de Silenciamiento del Gen , Glucógeno Sintasa Quinasa 3 , Glucógeno Sintasa Quinasa 3 beta , Humanos , Ratones , Embarazo , Proteínas/genética , Proteínas/metabolismo , Proteínas Proto-Oncogénicas c-mdm2/genética , Proteínas Proto-Oncogénicas c-mdm2/metabolismoRESUMEN
The protein phosphatase-2A (PP-2A), one of the major phosphatases in eukaryotes, is a heterotrimer, consisting of a scaffold A subunit, a catalytic C subunit and a regulatory B subunit. Previous studies have shown that besides regulating specific PP-2A activity, various B subunits encoded by more than 16 different genes, may have other functions. To explore the possible roles of the regulatory subunits of PP-2A in vertebrate development, we have cloned the PR55/B family regulatory subunits: ß and δ, analyzed their tissue specific and developmental expression patterns in Goldfish ( Carassius auratus). Our results revealed that the full-length cDNA for PR55/Bß consists of 1940 bp with an open reading frame of 1332 nucleotides coding for a deduced protein of 443 amino acids. The full length PR55/Bδ cDNA is 2163 bp containing an open reading frame of 1347 nucleotides encoding a deduced protein of 448 amino acids. The two isoforms of PR55/B display high levels of sequence identity with their counterparts in other species. The PR55/Bß mRNA and protein are detected in brain and heart. In contrast, the PR55/Bδ is expressed in all 9 tissues examined at both mRNA and protein levels. During development of goldfish, the mRNAs for PR55/Bß and PR55/Bδ show distinct patterns. At the protein level, PR55/Bδ is expressed at all developmental stages examined, suggesting its important role in regulating goldfish development. Expression of the PR55/Bδ anti-sense RNA leads to significant downregulation of PR55/Bδ proteins and caused severe abnormality in goldfish trunk and eye development. Together, our results suggested that PR55/Bδ plays an important role in governing normal trunk and eye formation during goldfish development.
RESUMEN
SG2NA is a member of the striatin protein family. In human and mouse, the SG2NA gene encodes two major protein isoforms: SG2NA alpha and SG2NA beta. The functions of these proteins, except for acting as the regulatory subunits for PP-2A, remain largely unknown. To explore the possible functions of SG2NA in lower vertebrates, we have isolated two SG2NA cDNAs from goldfish, Carassius auratus. Our results reveal that the first cDNA contains an ORF of 2118 bp encoding a deduced protein with 705 amino acids, and the second one 2148 bp coding for a deduced protein of 715 amino acids. Comparative analysis reveals that both isoforms belong to the alpha-type, and are named SG2NA alpha and SG2NA alpha(+). RT-PCR and western blot analysis reveal that the SG2NA gene is differentially expressed in 9 tissues examined. During goldfish development, while the SG2NA mRNAs remain relatively constant in the first 3 stages and then become decreased and fluctuated from gastrula to larval hatching, the SG2NA proteins are fluctuated, displaying a peak every 3 to 4 stages. Each later peak is higher than the earlier one and the protein expression level becomes maximal at hatching stage. Together, our results reveal that SG2NA may play an important role during goldfish development and also in homeostasis of most adult tissues.