RESUMEN
Background and Aim: Gastrointestinal (GI) nematode infection remains an important problem in livestock, particularly cattle. The infection may lead to serious health complications and affect animal products. The objective of this study was to investigate GI nematode infection and its associated risk factors in dairy and beef cattle farmed in Pak Chong District of Nakhon Ratchasima Province, northeast Thailand. Materials and Methods: Fecal specimens were collected from 101 dairy cattle and 100 beef cattle. Formalin-ethyl acetate concentration techniques were used to process the samples and the samples were observed under a light microscope. Samples were subjected to molecular identification of specific genera using conventional polymerase chain reaction and DNA sequencing. Results: The overall prevalence of GI nematode infection was 33.3%. The strongyle nematode was the most significant GI nematode in this area with a prevalence of 28.4%. The prevalence of strongyle nematodes was 58.0% in beef cattle and only 7.9% in dairy cattle. Trichuris spp. was another nematode found in both types of cattle with an overall prevalence of 5.0% with 9.0% in beef cattle and 1.0% in dairy cattle. The results of the epidemiological study indicate that the age of cattle, food, water sources, farming system, and housing floor are the most important risk factors. Among the strongyle nematodes, Ostertagia spp. was the most prevalent (82.0%), followed by Haemonchus spp. (62.3%) and Trichostrongylus spp. (8.2%), respectively. Conclusion: Infection with GI nematodes still exists in this area, particularly in beef cattle. Our reported data may benefit local parasitic control policies in the future.
RESUMEN
Nanotechnology is a cutting-edge field with diverse applications, particularly in the utilization of gold nanoparticles (AuNPs) due to their stability and biocompatibility. AuNPs serve as pivotal components in medical applications, with a specific emphasis on their significant antibacterial efficacy. This study focuses on synthesizing AuNPs using the cell-free supernatant of Streptomyces monashensis MSK03, isolated from terrestrial soil in Thailand. The biosynthesis process involved utilizing the cell-free supernatant of S. monashensis MSK03 and hydrogen tetrachloroauric acid (HAuCl4) under controlled conditions of 37 °C and 200 rpm agitation. Characterization studies revealed spherical AuNPs with sizes ranging from 7.1 to 40.0 nm (average size: 23.2 ± 10.7 nm), as confirmed by TEM. UV-Vis spectroscopy indicated a localized surface plasmon resonance (LSPR) band at 545 nm, while XRD analysis confirmed a crystalline structure with characteristics of cubic lattice surfaces. The capping molecules on the surface of AuNPs carry a negative charge, indicated by a Zeta potential of -26.35 mV, and FTIR analysis identified functional groups involved in reduction and stabilization. XANES spectra further confirmed the successful reduction of Au3+ to Au0. Moreover, the synthesized AuNPs demonstrated antibacterial activity against drug-resistant strains of Pseudomonas aeruginosa and Acinetobacter baumannii. Interestingly, the AuNPs showed non-toxicity to Vero cell lines. These significant antibacterial properties of the produced nanoparticles mean they hold great promise as new antimicrobial treatments for tackling the increasing issue of antibiotic resistance.
RESUMEN
Mitochondrial DNA (mtDNA) analysis is a genetic marker for human identification, especially matrilineal inheritance. Hypervariable regions (HVR) I and II of mtDNA have been currently performed for human identification worldwide. Further examination of HVRIII has been conducted with the aim of enhancing the power of discrimination. The aim of this research is to provide informative data on the polymorphisms of HVRIII in the Thai population in order to establish a national database for human identification. Thai people who were unrelated through the maternal lineage were recruited for blood collections. The mtDNA was extracted by Chelex extraction, amplified by polymerase chain reaction, and analyzed using Sequencing Analysis Software. The most common mutation in HVRIII was base substitution, followed by deletion and insertion. We discovered 40 unique haplotypes, with haplotype 489C being the most frequent. The haplotype diversity, power of discrimination, and random match probability were 0.8014, 0.7987, and 0.2013, respectively. Five-CA repeats were the most frequently observed in nucleotide positions 514-523. Our database can be employed as supplementary markers in addition to nuclear deoxyribonucleic acid (DNA) markers in forensic investigations. Moreover, the data could potentially enhance genetic identification and anthropological genetics research in Thailand.
Asunto(s)
Polimorfismo Genético , Pueblos del Sudeste Asiático , Humanos , Tailandia , ADN Mitocondrial/genética , Bases de Datos GenéticasRESUMEN
Agricultural wastes are lignocellulosic biomasses that contain high mineral and nutrient contents. This waste can be used as a raw material in industrial enzyme production by microbial fermentation. Phytase is an important enzyme used in animal feed to enhance the amount of phosphorus available for the growth and overall health improvement of monogastric animals. Fungi offer high potential as an effective source in the production of various extracellular enzymes. In this study, the production of lignocellulolytic enzymes (endoglucanase and xylanase) and phytase by a thermophilic fungus, namely Thermoascus aurantiacus strain SL16W, was evaluated using sixteen different Thai agricultural forms of waste under conditions of high temperature (45 °C). Semi-solid state fermentation was used in the production experiments. The results of this study reveal that the highest phytase activity (58.6 U/g substrate) was found in rice bran, whereas the highest degrees of activity of endoglucanase and xylanase were observed in wheat bran and red tea leaves at 19 and 162 U/g substrate, respectively. Consequently, the optimal conditions for phytase production of this fungus using rice bran were investigated. The results indicate that the highest phytase yield (58.6 to 84.1 U/g substrate) was observed in rice bran containing 0.5% ammonium sulfate as a nitrogen source with 10 discs of inoculum size at a cultivation period of 9 days at 45 °C and moisture content of 95%. Notably, the phytase yield increased by 1.71-fold, while endoglucanase and xylanase were also increased by 1.69- and 1.12-fold, respectively. Furthermore, the crude enzyme obtained from the optimal condition was extracted. The crude enzyme extract was then separately added to red tea leaves, rice straw, corncobs, palm residue, and peanut husks. Subsequently, total reducing sugar and phosphorus contents were determined. The results indicate that the highest level of reducing sugar (122.6 mg/L) and phosphorus content (452.6 mg/L) (p < 0.05) were obtained in palm residue at 36 and 48 h, respectively, after the addition of the crude enzyme extract. This study has provided valuable information on a potentially eco-friendly way to valorize agricultural waste into value-added products as industrial enzymes.
RESUMEN
A large amount of agro-industrial waste is produced worldwide in various agricultural sectors and by different food industries. The disposal and burning of this waste have created major global environmental problems. Agro-industrial waste mainly consists of cellulose, hemicellulose and lignin, all of which are collectively defined as lignocellulosic materials. This waste can serve as a suitable substrate in the solid-state fermentation process involving mushrooms. Mushrooms degrade lignocellulosic substrates through lignocellulosic enzyme production and utilize the degraded products to produce their fruiting bodies. Therefore, mushroom cultivation can be considered a prominent biotechnological process for the reduction and valorization of agro-industrial waste. Such waste is generated as a result of the eco-friendly conversion of low-value by-products into new resources that can be used to produce value-added products. Here, we have produced a brief review of the current findings through an overview of recently published literature. This overview has focused on the use of agro-industrial waste as a growth substrate for mushroom cultivation and lignocellulolytic enzyme production.
Asunto(s)
Agaricus , Agricultura , Cuerpos Fructíferos de los Hongos , Proteínas Fúngicas/biosíntesis , Residuos Industriales , Lignina/metabolismo , Agaricus/enzimología , Agaricus/crecimiento & desarrollo , Cuerpos Fructíferos de los Hongos/enzimología , Cuerpos Fructíferos de los Hongos/crecimiento & desarrollo , Lignina/químicaRESUMEN
Polyhydroxybutyrate (PHB) is a biodegradable biopolymer which is useful for various applications including packing, medical and coating materials. An endospore-forming bacterium (strain BP17) was isolated from composted soil and evaluated for PHB production. Strain BP17, taxonomically identified as Bacillus drentensis, showed enhanced PHB accumulation and was selected for further studies. To achieve maximum PHB production, the culture conditions for B. drentensis BP17 were optimized through response surface methodology (RSM) employing central composite rotatable design (CCRD). The final optimum fermentation conditions included: pineapple peel solution, 11.5% (v/v); tryptic soy broth (TSB), 60 g/L; pH, 6.0; inoculum size, 10% (v/v) and temperature, 28°C for 36 h. This optimization yielded 5.55 g/L of PHB compared to the non-optimized condition (0.17 g/L). PHB accumulated by B. drentensis BP17 had a polydispersity value of 1.59 and an average molecular weight of 1.15x105 Da. Thermal analyses revealed that PHB existed as a thermally stable semi-crystalline polymer, exhibiting a thermal degradation temperature of 228°C, a melting temperature of 172°C and an apparent melting enthalpy of fusion of 83.69 J/g. It is evident that B. drentensis strain BP17 is a promising bacterium candidate for PHB production using agricultural waste, such as pineapple peel as a low-cost alternative carbon source for PHB production.
Asunto(s)
Ananas/química , Bacillus/metabolismo , Hidroxibutiratos/metabolismo , Plásticos/metabolismo , Residuos , Análisis de Varianza , Bacillus/citología , Bacillus/ultraestructura , Filogenia , Espectroscopía de Protones por Resonancia Magnética , ARN Ribosómico 16S/genética , Factores de Tiempo , Temperatura de TransiciónRESUMEN
Phytases are a group of enzymes that hydrolyze the phospho-monoester bonds of phytates. Phytates are one of the major forms of phosphorus found in plant tissues. Fungi are mainly used for phytase production. The production of fungal phytases has been achieved under three different fermentation methods including solid-state, semi-solid-state, and submerged fermentation. Agricultural residues and other waste materials have been used as substrates for the evaluation of enzyme production in the fermentation process. Nutrients, physical conditions such as pH and temperature, and protease resistance are important factors for increasing phytase production. Fungal phytases are considered monomeric proteins and generally possess a molecular weight of between 14 and 353 kDa. Fungal phytases display a broad substrate specificity with optimal pH and temperature ranges between 1.3 and 8.0 and 37-67°C, respectively. The crystal structure of phytase has been studied in Aspergillus. Notably, thermostability engineering has been used to improve relevant enzyme properties. Furthermore, fungal phytases are widely used in food and animal feed additives to improve the efficiency of phosphorus intake and reduce the amount of phosphorus in the environment.
RESUMEN
Polypores are diverse macrofungi that have been extensively studied for their lignocellulolytic enzyme production capabilities. Currently, these enzymes are being used for many industrial purposes. However, the high cost associated with their production is the main barrier to their broader application. This work aimed to study the optimal medium and conditions for endoglucanase production using solid state fermentation. Seven polypore strains were used for endoglucanase activity screening. The fermentation experiments were carried out in 250â ml Erlenmeyer flasks with green tea waste as a substrate. Notably, Microporus xanthopus strain KA038 showed the best level of activity (38.62â IU/gds). Various parameters such as moisture content, nitrogen source, initial pH value, inoculum size and incubation time were considered to determine the optimal conditions for endoglucanase production. The optimal medium consisted of green tea leaves as a carbon source, beef extract as an organic nitrogen source, NH4H2PO4 as an inorganic nitrogen source, pH 7.0 and an incubation temperature at 30°C for 4â days resulted in a high enzyme yield with M. xanthopus strain KA038 (81.8â IU/gds).This article has an associated First Person interview with the first author of the paper.
RESUMEN
A novel bioplastic-degrading actinomycete, strain SCM_MK2-4T, was isolated from paddy soil in Thailand. The 16S rRNA gene sequence showed that strain SCM_MK2-4T belonged to the genus Amycolatopsis, with the highest sequence similarity to Amycolatopsisazurea JCM 3275T (99.4â%), and was phylogenetically clustered with this strain along with Amycolatopsislurida JCM 3141T (99.3â%), A. japonica DSM 44213T (99.2â%), A. decaplanina DSM 44594T (99.0â%), A. roodepoortensis M29T (98.9â%), A. keratiniphilasubsp. nogabecina DSM 44586T (98.8â%), A. keratiniphilasubsp. keratiniphila DSM 44409T (98.5â%), A. orientalis DSM 40040T (98.4â%) and A. regifaucium GY080T (98.3â%). A combination of DNA-DNA hybridization results ranging from 42.8±3.2 to 66.2±1.4â% with the type strains of A. azurea and A. lurida and some different phenotypic characteristics indicated that the strain could be distinguished from its closest phylogenetic neighbours. Whole-cell hydrolysates of the strain were shown to contain meso-diaminopimelic acid, arabinose, galactose, glucose, ribose, mannose, rhamnose and xylose. The predominant menaquinone was MK-9(H4). The major cellular fatty acid profile consisted of iso-C15â:â0, iso-C16â:â0, summed feature 3 (C16â:â1ω7c and/or iso-C15â:â0 2OH) and C16â:â0. The polar lipid composition of the strain consisted of phosphatidyl-N-methylethylethanolamine, phosphatidylethanolamine, hydroxyphosphatidylethanolamine, phosphatidylglycerol, aminophospholipids, an unidentified phospholipid and two unidentified glycolipids. The G+C content of the genomic DNA was 68.2 mol%. On the basis of phylogenetic analyses, DNA-DNA hybridization experimentation and the phenotypic characteristics, it was concluded that strain SCM_MK2-4T represents a novel species of the genus Amycolatopsis, for which the name Amycolatopsis oliviviridis sp. nov. is proposed. The type strain is SCM_MK2-4T (=TBRC 7186T=JCM 32134T).
Asunto(s)
Actinomycetales/clasificación , Filogenia , Poliésteres/metabolismo , Microbiología del Suelo , Actinomycetales/genética , Actinomycetales/aislamiento & purificación , Técnicas de Tipificación Bacteriana , Composición de Base , ADN Bacteriano/genética , Ácido Diaminopimélico/química , Ácidos Grasos/química , Glucolípidos/química , Hibridación de Ácido Nucleico , Fosfolípidos/química , ARN Ribosómico 16S/genética , Análisis de Secuencia de ADN , Tailandia , Vitamina K 2/análogos & derivados , Vitamina K 2/químicaRESUMEN
This study aims to find the optimal medium and conditions for polylactic acid (PLA)-degrading enzyme production by Amycolatopsis sp. SCM_MK2-4. Screening of the most effective components in the enzyme production medium by Plackett-Burman design revealed that the silk cocoon and PLA film were the most significant variables enhancing the PLA-degrading enzyme production. After an response surface methodology, a maximum amount of PLA-degrading enzyme activity at 0.74 U mL-1 was predicted and successfully validated at 95% after 0.39% (w/v) silk cocoon and 1.62% (w/v) PLA film were applied to the basal medium. The optimal initial pH value, temperature, and inoculum size were evaluated by a method considering one-factor-at-a-time. The values were recorded at an initial pH in the range of 7.5-9.0, a temperature of 30-32°C, and an inoculum size of 4-10%. The highest activity of approximately 0.95 U mL-1 was achieved after 4 days of cultivation using the optimized medium and under optimized conditions in a shake flask. Upscaling to the use of a 3-L stirred tank fermenter was found to be successful with a PLA-degrading activity of 5.53 U mL-1; which represents a 51-fold increase in the activity compared with that obtained from the nonoptimized medium and conditions in the shake flask.
Asunto(s)
Actinomycetales/enzimología , Microbiología Industrial/métodos , Péptido Hidrolasas/metabolismo , Poliésteres/metabolismo , Actinomycetales/metabolismo , Algoritmos , Reactores Biológicos , Medios de Cultivo/metabolismo , Concentración de Iones de Hidrógeno , Microbiología Industrial/instrumentación , TemperaturaRESUMEN
Forty agricultural soils were collected from Chiang Mai and Lampang provinces in northern Thailand. Bacteria, actinomycetes and fungi were isolated and screened for their ability to degrade polylactic acid (PLA), polycaprolactone (PCL) and poly(butylene succinate) (PBS) by the agar diffusion method. Sixty-seven actinomycetes, seven bacteria and five fungal isolates were obtained. The majority of actinomycetes were Streptomyces based on morphological characteristic, chemotaxonomy and 16S rRNA gene data. Seventy-nine microorganisms were isolated from 40 soil samples. Twenty-six isolates showed PLA-degradation (32.9 %), 44 isolates showed PBS-degradation (55.7 %) and 58 isolates showed PCL-degradation (73.4 %). Interestingly, 16 isolates (20.2 %) could degrade all three types of bioplastics used in this study. The Amycolatopsis sp. strain SCM_MK2-4 showed the highest enzyme activity for both PLA and PCL, 0.046 and 0.023 U/mL, respectively. Moreover, this strain produced protease, esterase and lipase on agar plates. Approximately, 36.7 % of the PLA film was degraded by Amycolatopsis sp. SCM_MK2-4 after 7 days of cultivation at 30 °C in culture broth.