Treatment of Obesity with Thyroid hormones in Europe. Data from the THESIS* Collaboration.

PURPOSE: The use of thyroid hormones (TH) to treat obesity is unsupported by evidence as reflected in international guidelines. We explored views about this practice, and associations with respondent characteristics among European thyroid specialists. METHODS: Specialists from 28 countries were invited to a survey via professional organisations. The relevant question was whether "Thyroid hormones may be indicated in biochemically euthyroid patients with obesity resistant to lifestyle interventions". RESULTS: Of 17,232 invitations 5695 responses were received (33% valid response rate; 65% women; 90% endocrinologists). Of these, 290 (5.1%) stated that TH may be indicated as treatment for obesity in euthyroid patients. This view was commoner among non-endocrinologists (8.7% vs. 4.7%, p < 0.01), private practice (6.5% vs. 4.5%, p < 0.01), and varied geographically (Eastern Europe, 7.3%; Southern Europe, 4.8%; Western Europe, 2.7%; and Northern Europe, 2.5%). Respondents from Northern and Western Europe were less likely to use TH than those from Eastern Europe (p < 0.01). Gross national income (GNI) correlated inversely with this view (OR 0.97, CI: 0.96-0.97; p < 0.001). Having national guidelines on hypothyroidism correlated negatively with treating obesity with TH (OR 0.71, CI: 0.55-0.91). CONCLUSIONS: Despite the lack of evidence, and contrary to guidelines' recommendations, about 5% of respondents stated that TH may be indicated as a treatment for obesity in euthyroid patients resistant to life-style interventions. This opinion was associated with (i) respondent characteristics: being non-endocrinologist, working in private practice, treating a small number of hypothyroid patients annually and (ii) national characteristics: prevalence of obesity, Eastern Europe, low GNI and lack of national hypothyroidism guidelines.

Leg Lymphoedema After Inguinal and Ilio-Inguinal Lymphadenectomy for Melanoma: Results from a Prospective, Randomised Trial.

BACKGROUND: The Evaluation of Groin Lymphadenectomy Extent for Melanoma (EAGLE FM) study sought to address the question of whether to perform inguinal (IL) or ilio-inguinal lymphadenectomy (I-IL) for patients with inguinal nodal metastatic melanoma who have no clinical or imaging evidence of pelvic disease. Primary outcome measure was disease-free survival at 5 years, and secondary endpoints included lymphoedema. METHODS: EAGLE FM was designed to recruit 634 patients but closed with 88 patients randomised because of slow recruitment and changes in melanoma management. Lymphoedema assessments occurred preoperatively and at 6, 12, 18, and 24 months postoperatively. Lymphoedema was defined as Inter-Limb Volume Difference (ILVD) > 10%, Lymphoedema Index (L-Dex®) > 10 or change of L-Dex® > 10 from baseline. RESULTS: Prevalence of leg lymphoedema between the two groups was similar but numerically higher for I-IL at all time points in the first 24 months of follow-up; highest at 6 months (45.9% IL [CI 29.9-62.0%], 54.1% I-IL [CI 38.0-70.1%]) and lowest at 18 months (18.8% IL [CI 5.2-32.3%], 41.4% I-IL [CI 23.5-59.3%]). Median ILVD at 24 months for those affected by lymphoedema was 14.5% (IQR 10.6-18.7%) and L-Dex® was 12.6 (IQR 9.0-17.2). There was not enough statistical evidence to support associations between lymphoedema and extent of surgery, radiotherapy, or wound infection. CONCLUSIONS: Despite a trend for patients who had I-IL to have greater lymphoedema prevalence than IL in the first 24 months after surgery, our study's small sample did not have the statistical evidence to support an overall difference between the surgical groups.

Focused parathyroidectomy without intraoperative parathormone testing is safe after pre-operative localization with 18F-Fluorocholine PET/CT.

A focused surgical approach based on pre-operative localization replaced the classical four-gland exploration in patients with primary hyperparathyroidism (PHP). Sestamibi scanning and ultrasound are most often used localization modalities with reported sensitivity of 54-100% for identification of single gland disease. The aim of this study was to analyze the results of pre-operative localization with 18F-Fluorocholine PET/CT (FCh-PET) in patients with PHP. A retrospective review of 151 patients with PHP who underwent surgery after pre-operative localization with FCh-PET was performed. Only a focused parathyroidectomy without ioPTH testing had been done in patients with single adenoma on FCh-PET. Primary outcome was operative failure, defined as persistent PHP. According to pre-operative FCh-PET 126 (83,4%) patients had single adenoma, 22 (14,5%) multiglandular disease and the test was negative in only two patients. Intraoperative failure experienced 4/126 patients (3,3%) with single adenoma. Removed parathyroid glands were normal in three and hyperplastic in one patient with intraoperative failure. A limited bilateral neck exploration with ioPTH testing was used in 14/22 patients with double adenoma and a classical four-gland exploration without ioPTH testing was used in 8/22 patients with more than two pathological glands according to pre-operative FCh-PET. Intraoperative failure experienced 2/22 patients (9,1%). In two patients with negative FCh-PET a classical four-gland exploration without ioPTH testing was used and one experienced intraoperative failure. A preoperative localization with FCh-PET is a reliable test in patients with PHP. Patients with a single adenoma on FCh-PET can safely undergo a focused parathyroidectomy without ioPTH testing.

Forces that fracture teeth during extraction with mandibular premolar and maxillary incisor forceps.

Our aim was to measure the forces that fracture teeth during extraction based on the effectiveness of the extraction forceps, and to compare them with data collected about forces applied to extracted teeth that did not fracture. We studied 208 patients whose teeth fractured during both the standard and our new method of extraction: maxillary incisors (n=79) extracted with forceps 1 (maxillary incisor forceps), and both maxillary (n=95) and mandibular incisors (n=34) extracted with forceps 13 (mandibular premolar forceps). Forces needed to fracture were assessed with a specially-designed instrument for measuring pressure and rotation. Mean (SD) pressure at the fracture site was significantly higher in maxillary incisors extracted with forceps 1 (1.26 (0.26) bar) then in both maxillary and mandibular incisors extracted with forceps 13 (0.96 (0.19) and 0.98 (0.16), p<0.001). Pressure at dislocation and both left and right rotation showed similar patterns. Pressure correlated to root surfaces of teeth ranging from r=0.35-0.54 but the correlation coefficients did not differ significantly between the teeth-forceps groups. Pressure was higher in fractured than in extracted teeth, and this varied from 3%-48%. In conclusion, forces that break teeth during extractions are sometimes only slightly higher than the extraction forces, so caution is needed during extraction.

Benzdiamidine.

The molecule of benzene-1,4-dicarboxamidine or benzdiamidine, C(8)H(10)N(4), reveals C(i) symmetry. Hydrogen bonds utilize the amino groups as double donors, whereas the imino groups act as double acceptors. The network formed is similar to that observed in the crystal packing of terephthalamide.

Bis(amino acid) oxalyl amides as ambidextrous gelators of water and organic solvents: supramolecular gels with temperature dependent assembly/dissolution equilibrium.

Bis(LeuOH) (1a), bis-(ValOH) (2a) and bis(PhgOH) (5a) (Phg denotes (R)-phenylglycine) oxalyl amides are efficient low molecular weight organic gelators of various organic solvents and their mixtures as well as water, water/DMSO, and water/DMF mixtures. The organisational motifs in aqueous gels are dominated primarily by lipophilic interactions while those in organic solvents are formed by intermolecular hydrogen bonding. Most of the gels are thermoreversible and stable for many months. However, 2a forms unstable gels with organic solvents which upon ageing transform into variety of crystalline shapes. For some 1a/alcohol gels, a linear correlation between alcohol dielectric constants (epsilon) and gel melting temperatures (Tg) was found. The 1H NMR and FTIR spectroscopic investigations of selected gels reveal the existence of temperature dependent network assembly/dissolution equilibrium. In the 1H NMR spectra of gels only the molecules dissolved in entrapped solvent could be observed. By using an internal standard, the concentration of dissolved gelator molecules could be determined. In FTIR spectra, the bands corresponding to network assembled and dissolved gelator molecules are simultaneously present. This enabled determination of the Kgel values by using both methods. From the plots of InKgel versus 1/T, the deltaHgel values of selected gels have been determined (-deltaHgel in 10-36 kJ mol(-1) range) and found to be strongly solvent dependent. The deltaHgel values determined by 1H NMR and FTIR spectroscopy are in excellent agreement. Crystal structures of 2a and rac-5a show the presence of organisational motifs and intermolecular interactions in agreement with those in gel fibres elucidated by spectroscopic methods.

Intermolecular contacts in the crystal packing of 2,2'-(N,N'-oxalyldiimino)bis(3-phenylpropanamide) dimethyl sulfoxide solvate.

In the title compound, C20H22N4O4*C2H6OS, two distinct hydrogen-bond systems connect oxalamide groups in one pattern and primary amide groups in the other to form a two-dimensional network perpendicular to the c axis. These hydrophilic layers are joined to the three-dimensional structure through C--H...pi interactions. The hydrogen-bonded waved layers shape holes which are occupied by disordered dimethyl sulfoxide solvent molecules.

meso-N,N'-oxalyldivaline.

The title compound, 2,2'-(oxalyldiimino)bis(3-methylbutanoic acid), C12H20N2O6, possesses a centre of symmetry. In the crystal, molecules are connected by hydrogen bonds between oxamide and carboxyl groups, similar to the pattern of the monoclinic forms of HO-Gly-CO-CO-Gly-OH and HO-Aib-CO-CO-Aib-OH (Gly is glycine and Aib is 2-aminoisobutyric acid). The characteristic torsion angles in the title compound are close to those in peptide alpha-helices.

Histologic difference in epithelial linings between follicular and radicular cysts.

The purpose of this study was to identify histologic differences in epithelial linings between follicular and radicular cysts in relation of their development. Linings and surrounding tissues of 25 radicular and 20 follicular cysts from archival paraffin embedded tissues were obtained and stained with haematoxylin and eosin. Radicular cysts showed orthokeratotic 9-14 cell-layer-thick non-keratinized squamous epithelium and unspecific chronic inflammatory reaction in connective tissue. Follicular cysts showed 2-4 cell-layer-thick of non-keratinized stratified squamous or flattened-low cuboidal epithelium and connective tissue capsule free from inflammatory cell infiltration.

In vitro pulp chamber temperature rises associated with the argon laser polymerization of composite resin.

STUDY DESIGN/MATERIALS AND METHODS: This in vitro study was performed upon 50 extracted human molars that provided the occlusal surfaces for standard class I preparations. The cavity floor of the 20 specimens was covered with zinc phosphate cement and the teeth were sectioned transversally at or below the cementoenamel junction. In some specimens pulp tissue was removed from the pulp chamber. The cavities of all specimens were filled with composite resin, and the resin was cured with an argon laser. RESULTS: A statistically significant difference in the rise in temperature was obtained only in the temperature of dentin roof of the pulp chamber between the specimens with (2.2 degrees C) and without (3.1 degrees C) cement base (P < .05). There was no significant difference in the temperature of the pulp tissue between specimens with (2.7 degrees C) and without (2.2 degrees C) base cement. The peak temperature of the composite surface was 13.8 degrees C. CONCLUSION: These data indicate that argon laser curing may be a method of choice for polymerization of the composite resin.