Plasmon resonance biosensor for interleukin-1ß point-of-care determination: A tool for early periodontitis diagnosis.

Among pro-inflammatory cytokines, Interleukin-1ß is crucially involved in several inflammatory-based diseases and even cancer. Increased Interleukin-1ß levels in oral fluids have been proposed as an early marker of periodontitis, a broadly diffused chronic inflammatory condition of periodontal-supporting tissues, leading eventually to tooth loss. We describe the development of a portable surface-plasmon-resonance-based optical fiber probe suitably coated with an anti-Interleukin-1ß antibody monolayer. A pico-nanomolar linear range of determination was obtained in both buffer solution and saliva with a rapid (3 min) incubation and high selectivity in presence of interferents. Higher Interleukin-1ß concentration in the saliva of a periodontitis patient compared to a healthy control was determined. These measurements were validated by an automated ELISA system. Our results sustain the potential applicability of the proposed SPR-POF as diagnostic point-of-care device for real-time monitoring of salivary Interleukin-1ß, that can support early detection of oral inflammatory-based pathologies and rapid and timely therapeutic decisions.

A novel plasmonic optical-fiber-based point-of-care test for periodontal MIP-1α detection.

The analysis of salivary biomarkers as expression of periodontal health conditions has been proposed as a useful aid to conventional diagnostic approaches. In this study, we present a point-of-care test (POCT) exploiting a surface plasmon resonance (SPR)-based optical biosensor to detect salivary macrophage inflammatory protein (MIP)-1α, a promising marker of periodontitis. A plastic optical fiber (POF) was suitably modified and functionalized by an antibody self-assembled monolayer against MIP-1α for plasmonic detection. The proposed SPR-POF biosensor showed high selectivity and very low limit of detection for MIP-1α of 129 fM (1.0 pg/mL) in phosphate-buffered saline and 346 fM (2.7 pg/mL) in saliva. As a proof of concept, this POCT was also able to discriminate between a periodontitis patient and a healthy subject. The obtained results support the future application of this technology for an on-site detection and real-time monitoring of periodontal health conditions for diagnostic and therapeutic purposes.

An optical fiber-based point-of-care test for periodontal MMP-8 detection: A proof of concept.

OBJECTIVES: The evaluation of salivary biomarkers has been proposed as a simple and non-invasive aid to the conventional periodontal diagnosis based on clinical-radiographic parameters. Matrix metalloproteinase-8 (MMP-8), especially in its active form, is considered one of the most reliable biomarkers of periodontitis, and point-of-care tests (POCTs) have been proposed for its clinical monitoring. In this proof-of-concept study, a novel highly sensitive POCT based on a plastic optical fiber (POF) biosensor exploiting surface plasmon resonance (SPR) to detect salivary MMP-8 is described. METHODS: A SPR-POF biosensor was functionalized with a specific antibody to develop a surface-assembled monolayer (SAM) for the detection of total MMP-8. A white light source and a spectrometer connected to the biosensor were used to quantify MMP-8 level in both buffer and real matrix (saliva) by analysing the shift of the resonance wavelength determined by the specific antigen-antibody binding upon the SAM. RESULTS: Dose-response curves by serial dilutions of human recombinant MMP-8 were realized, obtaining a limit of detection (LOD) of 40 pM (1.76 ng/ml) in buffer and 225 pM (9.9 ng/ml) in saliva and high selectivity compared to interferent analytes (MMP-2 and IL-6). CONCLUSIONS: The proposed optical fiber-based POCT was able to detect and measure total MMP-8 with high selectivity and very low LOD in both buffer and saliva. CLINICAL SIGNIFICANCE: The SPR-POF technology may be employed to create highly sensitive biosensors to monitor salivary MMP-8 levels. The possibility of specifically detecting its active, rather than total, form need to be further investigated. If confirmed and clinically validated, such a device may represent a promising tool to make an immediate, highly sensitive and reliable diagnosis of periodontitis, and to carry out a timely and targeted therapy, possibly helping to prevent the onset of local and systemic periodontitis-related complications.

Plasmonic optical fiber biosensor development for point-of-care detection of malondialdehyde as a biomarker of oxidative stress.

Numerous pieces of evidence demonstrate that oxidative stress impairs biological functions, speeds up aging, and has a role in a variety of human diseases, including systemic and oral inflammatory disorders, and even cancer. Therefore, technologies providing accurate measures of oxidative stress indicators or biomarkers appear essential in the identification/prevention of such diseases, and in their management. Particularly advantageous is the employement of point-of-care tests based on affordable and small biochips since they can quickly process biological samples and deliver results near the point of care for a prompt therapeutic intervention. Malondialdehyde (MDA) is a key byproduct of oxidative reaction and has been identified as an effective marker of oxidative stress. Herein, we describe the detection of MDA in buffer and in a complex matrix such as saliva, using a plasmonic optical fiber device combined with a highly selective anti-MDA antibody. The experimental results highlight the excellent performance of the proposed biosensor, as well as its ability to provide a low-cost point-of-care test (PoC-T) to be used in real life situations. We demonstrated that a single saliva dilution step and a short incubation time are required for the accurate detection of low concentrations of total MDA (free and conjugated). As a proof-of-concept of future biomedical applications, the method has been tested to determine MDA concentration in saliva of a periodontitis patient compared to that of a healthy control. The obtained findings represent the basis for developing PoC-Ts to be employed in monitoring oral diseases like periodontitis, oral cancers or systemic oxidative-stress associated pathologies. Conclusively, our study puts the ground for an oxidative stress biosensor widely-applicable to different scenarios.

Towards a point-of-care test to cover atto-femto and pico-nano molar concentration ranges in interleukin 6 detection exploiting PMMA-based plasmonic biosensor chips.

Point-of-Care tests based on biomarkers, useful to monitor acute and chronic inflammations, are required for advances in medicine. In this scope, a key role is played by pro-inflammatory cytokines, of which interleukin 6 (IL-6) is generally thought as one of the most relevant. To use IL-6 in real scenarios, detection in ultra-low concentration ranges is required. In this work, two IL-6 biosensors are obtained by exploiting the combination of the same antibody self-assembled monolayer with two different plasmonic probes. This approach has demonstrated, via experimental results, that two different IL-6 concentration ranges can be explored. More specifically, IL-6 in an atto-femto molar range can be detected via polymer-based nanoplasmonic chips. On the other hand, a pico-nano molar range is obtained by a surface plasmon resonance platform in plastic optical fibers. As a proof of concept, the detection of IL-6 at the femto molar range has been obtained in Saliva and Serum. The results show that the proposed sensing approach could be useful in developing Point-of-Care devices based on a general setup with the capability to exploit both the plasmonic biosensor chips to monitor the IL-6 in the concentration range of interest, to provide an important support for the diagnosis and monitoring of oral and systemic diseases.

Enamel Matrix Derivative and Autogenous Bone Graft for Periodontal Regeneration of Intrabony Defects in Humans: A Systematic Review and Meta-Analysis.

The combination of enamel matrix derivative (EMD) with an autogenous bone graft in periodontal regeneration has been proposed to improve clinical outcomes, especially in case of deep non-contained periodontal defects, with variable results. The aim of the present systematic review and meta-analysis was to assess the efficacy of EMD in combination with autogenous bone graft compared with the use of EMD alone for the regeneration of periodontal intrabony defects. A literature search in PubMed and in the Cochrane Central Register of Controlled Trials was carried out on February 2019 using an ad-hoc search string created by two independent and calibrated reviewers. All randomized controlled trials (RCTs) comparing a combination of EMD and autogenous bone graft with EMD alone for the treatment of periodontal intrabony defects were included. Studies involving other graft materials were excluded. The requested follow-up was at least 6 months. There was no restriction on age or number of patients. Standard difference in means between test and control groups as well as relative forest plots were calculated for clinical attachment level gain (CALgain), probing depth reduction (PDred), and gingival recession increase (RECinc). Three RCTs reporting on 79 patients and 98 intrabony defects were selected for the analysis. Statistical heterogeneity was detected as significantly high in the analysis of PDred and RECinc (I2 = 85.28%, p = 0.001; I2 = 73.95%, p = 0.022, respectively), but not in the analysis of CALgain (I2 = 59.30%, p = 0.086). Standard difference in means (SDM) for CALgain between test and control groups amounted to -0.34 mm (95% CI -0.77 to 0.09; p = 0.12). SDM for PDred amounted to -0.43 mm (95% CI -0.86 to 0.01; p = 0.06). SDM for RECinc amounted to 0.12 mm (95% CI -0.30 to 0.55. p = 0.57). Within their limits, the obtained results indicate that the combination of enamel matrix derivative and autogenous bone graft may result in non-significant additional clinical improvements in terms of CALgain, PDred, and RECinc compared with those obtained with EMD alone. Several factors, including the surgical protocol used (e.g. supracrestal soft tissue preservation techniques) could have masked the potential additional benefit of the combined approach. Further well-designed randomized controlled trials, with well-defined selection criteria and operative protocols, are needed to draw more definite conclusions.

The Role of Autologous Platelet Concentrates in Alveolar Socket Preservation: A Systematic Review.

Prevention of alveolar bone resorption after tooth extraction may be useful for implant rehabilitation of the edentulous site minimizing the future need for bone augmentation procedures. A number of studies have investigated the efficacy of autologous platelet concentrates for the preservation of the alveolar bone volume after tooth extraction. Although encouraging results have been published, the available data are still controversial. The aim of the present systematic review was to assess the effect of platelet concentrates on alveolar socket preservation after tooth extraction. A literature search was carried out up to September 2017 for prospective controlled trials in which a test group using exclusively a platelet concentrate was compared with a control group in which extraction sockets were left to heal spontaneously. Seven controlled clinical trials published between 2010 and 2016 were included. A total of 320 extractions (170 tests and 150 controls) in 190 patients was considered. A great heterogeneity was found in terms of study design, methodological aspects, and outcome evaluation. For this reason, a quantitative analysis followed by meta-analysis was not possible, and only a descriptive analysis on the role of platelet concentrates in alveolar socket preservation was carried out. There is growing evidence that platelet concentrates may be advantageously used in postextraction sites, mainly to improve soft tissue healing and to reduce postoperative symptoms. Data about their potential in preserving the alveolar bone volume are still scarce and controversial, although recently encouraging results have been presented using more reliable and accurate evaluation technologies, such as the computed tomography. Further, well-designed and methodologically standardized investigations are strongly demanded to reach a higher level of evidence on this topic.