RESUMEN
Replicating the mechanical behavior of human bones, especially cancellous bone tissue, is challenging. Typically, conventional bone models primarily consist of polyurethane foam surrounded by a solid shell. Although nearly isotropic foam components have mechanical properties similar to cancellous bone, they do not represent the anisotropy and inhomogeneity of bone architecture. To consider the architecture of bone, models were developed whose core was additively manufactured based on CT data. This core was subsequently coated with glass fiber composite. Specimens consisting of a gyroid-structure were fabricated using fused filament fabrication (FFF) techniques from different materials and various filler levels. Subsequent compression tests showed good accordance between the mechanical behavior of the printed specimens and human bone. The unidirectional fiberglass composite showed higher strength and stiffness than human cortical bone in 3-point bending tests, with comparable material behaviors being observed. During biomechanical investigation of the entire assembly, femoral prosthetic stems were inserted into both artificial and human bones under controlled conditions, while recording occurring forces and strains. All of the artificial prototypes, made of different materials, showed analogous behavior to human bone. In conclusion, it was shown that low-cost FFF technique can be used to generate valid bone models and selectively modify their properties by changing the infill.
RESUMEN
INTRODUCTION: The present study aimed to assess the postoperative alignment and clinical outcomes of patients with complex extra-articular deformities (EADs) undergoing computer-assisted surgery (CAS) for constrained total knee arthroplasty (TKA) with modular stem extensions. MATERIALS AND METHODS: From May 2015 to July 2018, ten patients with EADs scheduled for constrained TKA were enrolled retrospectively. The preoperative average deviation from neutral (= 180°) mechanical axis was 15.3° (range of coronal alignment: 150.9° varus-202.9° valgus). Alignment was assessed using an accelerometer-based handheld CAS system. On long-leg films, the positions of the components and possible stems were analysed and templated preoperatively. The average follow-up was 3.3 years (range: 2.0-4.6 years). RESULTS: The postoperative mechanical axis was within ± 3.0° from neutral in nine patients. In all patients, the Knee Society score (KSS) and range of motion improved significantly. A constrained condylar and a rotating hinge prosthesis were used in five patients each. In eight patients, the 100-mm cementless stem that was preferred by the authors was found to be unusable for the femur or the tibia in the planning stage. For the femur, a cementless 100-mm stem was used in three, and a cemented 30-mm stem in five patients; a femoral stem was not usable in two patients. For the tibia, a cementless 100-mm stem was used in six, and a cemented 30-mm stem in two patients; a monoblock rotating hinge tibia was used in two patients. CONCLUSIONS: Complex EADs were excellently managed during constrained TKA implantation using the handheld CAS system. Templating allowed the possible stem lengths to be identified and prevented anatomical conflict with the CAS-configured mechanical alignment. Limb alignment and function improved significantly after surgery. No intra- or postoperative complications occurred. LEVEL OF EVIDENCE: Level IV, retrospective study.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Osteoartritis de la Rodilla , Computadoras de Mano , Humanos , Osteoartritis de la Rodilla/cirugía , Radiografía , Estudios RetrospectivosRESUMEN
PURPOSE: The treatment of an infected arthritic knee might be challenging. The failure rate has been reported to be high for open or arthroscopic debridement. A subsequently high rate of infection has been noted in these patients undergoing primary total knee arthroplasty (TKA). In the present study, a two-stage approach using an articulating spacer was used. The hypothesis was that the procedure would eradicate the infection and improve pain and function in these patients. METHODS: A total of 16 consecutive patients were enrolled in this retrospective study. The mean follow-up time was 6.1 years (range 2.0-9.9 years). Patients with advanced osteoarthritis and infection of the knee were included. All patients had previously undergone one or more failed arthroscopic or open procedures for the eradication of infection. All patients received the same homemade metal-on-plastic articulating antibiotic spacer. Double antibiotic therapy was given for 2 weeks intravenously and orally for 4 weeks. TKA implantation was performed 6 weeks after the first stage. RESULTS: The infection was eradicated without recurrence in all patients. The functional results were significantly improved, and pain was significantly reduced after spacer and TKA implantation. The mean amount of knee flexion was 95 ± 30° preoperatively, and it increased to 109 ± 14° (p = 0.012) after spacer implantation and to 119 ± 10° (p = 0.002) after TKA implantation. The mean KSS objective was 58 ± 12 preoperatively, and it increased to 75 ± 14 (p < 0.0001) after spacer implantation and to 96 ± 3 (p < 0.0001) after TKA implantation. The mean KSS function was 17 ± 11 preoperatively, and it increased to 46 ± 10 (p < 0.0001) after spacer implantation and to 86 ± 6 (p < 0.0001) after TKA implantation. The mean VAS score was 65 ± 11 preoperatively, and it decreased to 2 ± 4 (p < 0.0001) after spacer implantation and to 1 ± 2 (p < 0.0001) after TKA implantation. CONCLUSION: The two-stage procedure for the treatment of infected arthritic knees after failed eradication surgery was effective in all patients. Using an antibiotic articulating metal-on-plastic cement spacer showed improved functional results between the stages and at the final follow-up. No intra- or postoperative complications occurred.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Infecciones Relacionadas con Prótesis , Antibacterianos/uso terapéutico , Cementos para Huesos , Humanos , Infecciones Relacionadas con Prótesis/tratamiento farmacológico , Infecciones Relacionadas con Prótesis/cirugía , Reoperación , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
OBJECTIVES: Infections as a result of extended-spectrum ß-lactamase-producing Enterobacterales (ESBL-E) are considered infections with a high public health burden. In this study, we aimed to identify incidences of and risk factors for healthcare-associated infections (HAIs) after rectal colonization with ESBL-producing Escherichia coli (ESBL-EC) or Klebsiella pneumoniae (ESBL-KP). METHODS: This prospective cohort study was performed in 2014 and 2015. Patients colonized with ESBL-EC or ESBL-KP were monitored for subsequent HAI with ESBL-E and other pathogens. In the case of an ESBL-E infection, rectal and clinical isolates were compared using pulsed-field gel electrophoresis (PFGE), and whole-genome sequencing (WGS) for ESBL-KP isolates. Proportional hazard models were applied to identify risk factors for HAIs, and to analyse competing risks. RESULTS: Among all patients admitted to the hospital during the study period, 13.6% were rectally screened for third-generation cephalosporin-resistant Enterobacterales (3GCREB). A total of 2386 rectal carriers of ESBL-EC and 585 of ESBL-KP were included in the study. Incidence density (ID) for HAI with ESBL-E was 2.74 per 1000 patient days at risk (95% confidence interval (CI) 2.16-3.43) among carriers of ESBL-EC, while it was 4.44 per 1000 patient days at risk (95% CI 3.17-6.04) among carriers of ESBL-KP. In contrast, ID for HAI with other pathogens was 4.36 per 1000 patient days at risk (95% CI 3.62-5.21) among carriers of ESBL-EC, and 5.00 per 1000 patient days at risk (95% CI 3.64-6.69) among carriers of ESBL-KP. Cox proportional hazard regression analyses identified colonization with ESBL-KP (HR = 1.58, 95% CI 1.068-2.325) compared with ESBL-EC as independent risk factor for HAI with ESBL-E. The results were consistent over all competing risk analyses. CONCLUSIONS: Clinicians should be aware of the increased risk of ESBL-E infections among patients colonized with ESBL-KP compared with ESBL-EC that might be caused by underlying diseases, higher pathogenicity of ESBL-KP and other factors.
Asunto(s)
Infección Hospitalaria/epidemiología , Infecciones por Escherichia coli/epidemiología , Escherichia coli/aislamiento & purificación , Infecciones por Klebsiella/epidemiología , Klebsiella pneumoniae/aislamiento & purificación , beta-Lactamasas/genética , Adulto , Anciano , Infección Hospitalaria/microbiología , Farmacorresistencia Bacteriana , Electroforesis en Gel de Campo Pulsado , Escherichia coli/genética , Escherichia coli/metabolismo , Femenino , Genoma Bacteriano , Humanos , Incidencia , Klebsiella pneumoniae/genética , Klebsiella pneumoniae/metabolismo , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Recto/metabolismo , Secuenciación Completa del Genoma , beta-Lactamasas/metabolismoRESUMEN
We present a novel numerical model of the fracture-healing process using interface-capturing techniques, a well-known approach from fields like fluid dynamics, to describe tissue growth. One advantage of this method is its direct connection to experimentally observable parameters, including tissue-growth velocities. In our model, osteogenesis, chondrogenesis and revascularisation are triggered by mechanical stimuli via mechano-transduction based on previously established hypothesis of Claes and Heigele. After experimentally verifying the convergence of the numerical method, we compare the predictions of our model with those of the already established Ulm bone-healing model, which serves as a benchmark, and corroborate our results with existing animal experiments. We demonstrate that the new model can predict the history of the interfragmentary movement and forecast a tissue evolution that appears similar to the experimental results. Furthermore, we compare the relative tissue concentration in the healing domain with outcomes of animal experiments. Finally, we discuss the possible application of the model to new fields, where numerical simulations could also prove beneficial.
Asunto(s)
Curación de Fractura/fisiología , Modelos Biológicos , Algoritmos , Animales , Osteogénesis/fisiología , Estrés Mecánico , Factores de TiempoRESUMEN
A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.
RESUMEN
Postoperative cognitive impairment is among the most common medical complications associated with surgical interventions - particularly in elderly patients. In our aging society, it is an urgent medical need to determine preoperative individual risk prediction to allow more accurate cost-benefit decisions prior to elective surgeries. So far, risk prediction is mainly based on clinical parameters. However, these parameters only give a rough estimate of the individual risk. At present, there are no molecular or neuroimaging biomarkers available to improve risk prediction and little is known about the etiology and pathophysiology of this clinical condition. In this short review, we summarize the current state of knowledge and briefly present the recently started BioCog project (Biomarker Development for Postoperative Cognitive Impairment in the Elderly), which is funded by the European Union. It is the goal of this research and development (R&D) project, which involves academic and industry partners throughout Europe, to deliver a multivariate algorithm based on clinical assessments as well as molecular and neuroimaging biomarkers to overcome the currently unsatisfying situation.
Asunto(s)
Disfunción Cognitiva/etiología , Neuroimagen , Complicaciones Posoperatorias/diagnóstico , Biomarcadores , Disfunción Cognitiva/diagnóstico , Europa (Continente) , Unión Europea , Humanos , Medición de Riesgo , Factores de RiesgoRESUMEN
Infections with the zoonotic endoparasite Giardia duodenalis are widely spread among dogs and cats worldwide. Since the question whether the infection might be transmitted from domestic animals to their owners is still an important topic, a reliable detection of patent Giardia infections and the determination of the associated Giardia assemblages is of major concern. The objectives of the present study were to determine the prevalence of Giardia infections in dogs and cats living in Germany using different diagnostic tests and to identify the Giardia assemblages of infected animals. Furthermore, a possible correlation of coinfections with other endoparasites was analysed. All samples were investigated by enzyme-linked immunosorbent assay (ELISA), merthiolate-iodine-formalin concentration technique (MIFC) and zinc chloride flotation. ELISA-positive samples were additionally screened with a direct immunofluorescence assay (IFA). Faecal DNA was extracted from all Giardia cyst-positive samples and used for multilocus sequence typing with nested PCRs targeting the following gene loci: SSU rRNA (SSU), glutamate dehydrogenase (gdh) and triosephosphate isomerase (tpi). Samples from dogs and cats tested positive for Giardia coproantigen (ELISA) in 30.6% and 17.9%, respectively. The MIFC technique revealed Giardia cysts in 33.9% of canine and in 34.6% of feline ELISA-positive samples, while using IFA, cysts were present in 90.4% of canine and in 76.9% of feline ELISA-positive samples. Coinfections with other endoparasites besides Giardia were found in both dogs and cats, yet a statistically significant correlation could solely be drawn for the canine samples. The success rate of the different PCR protocols varied between 23.1% (tpi) and 91.3% (SSU) for dogs and between 25.0% (gdh) and 90.0% (SSU) for cats. Dog-specific Giardia assemblages C and D were detected in 42 and 55 canine isolates, respectively. The cat-specific Giardia assemblage F was detected in 14 feline isolates. Two canine and two feline samples harboured the zoonotic assemblage A. According to the results of the study, Giardia is a common endoparasite in dogs and cats from Germany. The exclusive application of MIFC is insufficient for a reliable identification of patent Giardia infections since the IFA revealed a higher sensitivity for the detection of Giardia cysts in feline and canine faecal samples. Even though the majority of investigated animals harboured the species-specific Giardia assemblages C, D and F, a zoonotic potential arising from assemblage A could not be excluded.
Asunto(s)
Enfermedades de los Gatos/epidemiología , Coinfección/veterinaria , Enfermedades de los Perros/epidemiología , Enfermedades de los Perros/parasitología , Giardia/fisiología , Giardiasis/veterinaria , Animales , Enfermedades de los Gatos/diagnóstico , Enfermedades de los Gatos/parasitología , Gatos , Coinfección/diagnóstico , Coinfección/epidemiología , Coinfección/parasitología , Enfermedades de los Perros/diagnóstico , Perros , Heces/parasitología , Alemania/epidemiología , Giardia/clasificación , Giardia/genética , Giardiasis/diagnóstico , Giardiasis/epidemiología , Giardiasis/parasitología , Prevalencia , Zoonosis/epidemiologíaRESUMEN
The human inner ear has an intricate spiral shape often compared to shells of mollusks, particularly to the nautilus shell. It has inspired many functional hearing theories. The reasons for this complex geometry remain unresolved. We digitized 138 human cochleae at microscopic resolution and observed an astonishing interindividual variability in the shape. A 3D analytical cochlear model was developed that fits the analyzed data with high precision. The cochlear geometry neither matched a proposed function, namely sound focusing similar to a whispering gallery, nor did it have the form of a nautilus. Instead, the innate cochlear blueprint and its actual ontogenetic variants were determined by spatial constraints and resulted from an efficient packing of the cochlear duct within the petrous bone. The analytical model predicts well the individual 3D cochlear geometry from few clinical measures and represents a clinical tool for an individualized approach to neurosensory restoration with cochlear implants.
Asunto(s)
Conducto Coclear/anatomía & histología , Modelos Estadísticos , Hueso Petroso/anatomía & histología , Ganglio Espiral de la Cóclea/anatomía & histología , Lámina Espiral/anatomía & histología , Ligamento Espiral de la Cóclea/anatomía & histología , Exoesqueleto/anatomía & histología , Exoesqueleto/ultraestructura , Animales , Autopsia , Variación Biológica Individual , Conducto Coclear/fisiología , Conducto Coclear/ultraestructura , Audición/fisiología , Humanos , Imagenología Tridimensional/instrumentación , Imagenología Tridimensional/métodos , Modelos Anatómicos , Nautilus/anatomía & histología , Nautilus/ultraestructura , Hueso Petroso/fisiología , Ganglio Espiral de la Cóclea/fisiología , Ganglio Espiral de la Cóclea/ultraestructura , Lámina Espiral/fisiología , Lámina Espiral/ultraestructura , Ligamento Espiral de la Cóclea/fisiología , Ligamento Espiral de la Cóclea/ultraestructuraRESUMEN
We present the first-time growth of bulk BaSnO3 single crystals from the melt by direct solidification, their basic electrical and optical properties as well as their structural quality. Our measurement of the melting point (MP) of BaSnO3 amounts to 1855 °C ± 25 K. At this temperature an intensive decomposition and non-stoichiometric evaporation takes place as the partial pressure of SnO(g) is about 90 times higher than that of BaO(g). X ray powder diffraction identified only the BaSnO3 perovskite phase, while narrow rocking curves having a full width at half maximum of 26 arcsec and etch pit densities below 106 cm-2 confirm a high degree of structural perfection of the single crystals. In this respect they surpass the structural properties of those single crystals that were reported in the literature. The electrical conductivity of nominally undoped crystals depends on the growth conditions and ranges from insulating to medium n-type conductivity. After post-growth annealing in an oxidizing atmosphere undoped crystals are generally insulating. Doping the crystals with lanthanum during growth results in a high n-type conductivity. For a La doping concentration of 0.123 wt.% we measured an electron concentration of 3.3 × 1019 cm-3 and an electron mobility of 219 cm2 V-1 s-1. Based on optical absorption measurements we determined an energy of 3.17 ± 0.04 eV at 5 K and of 2.99 ± 0.04 eV at 297 K for the indirect band gap of BaSnO3.
RESUMEN
PURPOSE: The purpose of the study was to evaluate the accuracy of the planning of the patient-specific pin guides in total knee arthroplasty (TKA). This planning was performed primarily by a technician of the company and offered to the surgeon. All parameters of the implantation can either be modified or accepted by the surgeon. The hypothesis was that the plan needs preoperative intervention by the surgeon. METHODS: A prospective study in 50 patients was carried out. All patients received the same posterior-stabilised implant with patient-specific instrumentation. All surgical parameters (coronal, sagittal, rotational alignment, femoral and tibial resection levels and implant sizes) were checked by the orthopaedic surgeon and changed if necessary. RESULTS: Preoperatively, the femoral size was changed in 8 patients (16 %), the femoral flexion in 23 patients (46 %), the femoral shift in 34 patients (68 %), the tibial size in 24 patients (48 %) and the tibial rotation in all patients. The epicondylar axis was accepted in 47 patients (94 %) in the technician plan. Mean planning time was 8 ± 4 min. Intraoperatively, the femoral anterior-posterior size was in 50 patients (100 %) the same as in the surgeon and in 42 patients (84 %) the same as in the technician plan (p = 0.003). The tibial component implanted was in 42 patients (84 %) the same as in the surgeon and in 19 patients (38 %) the same as in the technician plan (p < 0.0001). A femoral distal recut was necessary in 31 patients (62 %) and a change of the tibial proximal cut in 17 patients (34 %) during surgery. Intraoperatively, no changes of the femoral and tibial alignment, the femoral anterior-posterior size, the femoral flexion, the femoral shift, the femoral and tibial rotation were necessary. Postoperatively, the coronal mechanical overall axis was within ±3° in 47 patients (94 %) with a maximum deviation of 5.6°. CONCLUSIONS: Significant changes of the technician plan were necessary to get an accurate preoperative plan. Intraoperative changes were significant less compared to the surgeon than to the technician plan. No major changes (alignment, femoral anterior-posterior size and rotation) of the surgeon plan were necessary. Surgeons using patient-specific pin guides in TKA may verify the default plan provided by the technician. A blind reply on the technician plan may be not recommended. LEVEL OF EVIDENCE: Therapeutic study, Level III.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/métodos , Desviación Ósea/prevención & control , Imagen por Resonancia Magnética , Osteoartritis de la Rodilla/cirugía , Complicaciones Posoperatorias/prevención & control , Cuidados Preoperatorios/métodos , Cirugía Asistida por Computador/métodos , Anciano , Anciano de 80 o más Años , Puntos Anatómicos de Referencia , Artroplastia de Reemplazo de Rodilla/instrumentación , Desviación Ósea/etiología , Femenino , Humanos , Imagenología Tridimensional , Prótesis de la Rodilla , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Rotación , Método Simple Ciego , Cirugía Asistida por Computador/instrumentación , Resultado del TratamientoRESUMEN
PURPOSE: Recently, new custom-fit pin guides in total knee arthroplasty (TKA) have been introduced. Use of these guides may reduce operating time. Use of the guides combined with the absence of intramedullary alignment jigs may lead to reduced blood loss and improved early outcomes. Our aim was to evaluate blood loss and early clinical outcomes in patients undergoing minimally invasive TKA using custom-fit magnetic resonance imaging (MRI)-based pin guides. METHODS: A prospective study in 80 patients was carried out. Patients were divided randomly into 2 equal groups. In one group, intramedullary alignment jigs were used. In the second group, custom-fit MRI-based pin guides were used. All patients received the same cemented posterior-stabilized implant through a mini-midvastus approach. The volume in the drain bottles was recorded after 48 h. Hb loss was estimated by subtracting the postoperative from the preoperative Hb level. Transfusion requirements and surgical time were recorded. Outcome measures were Knee Society Scores (KSS), knee flexion, knee swelling and pain. RESULTS: There was lower mean drainage of blood in the custom-fit group (391 ml vs. 603 ml; p < 0.0001). There was no difference in estimated loss of Hb (3.6 g/dl vs. 4.1 g/dl; n.s.) and in transfusion requirements (7.5 % vs. 10 %; n.s.). Surgical time was reduced in the custom-fit group (12 min less; p = 0.001). KSS measured at week 2, 6 and 12 showed no significant difference between groups. Knee flexion measured on days 7, 10 and at week 6, 12 and knee swelling and pain measured on days 1, 3, 10 and at week 6, 12 showed no significant difference between groups. CONCLUSIONS: Using custom-fit pin guides reduces blood drainage, but not the estimated Hb loss in minimally invasive TKA and does not affect transfusion rate. Surgical time is reduced. There is no effect on the early clinical outcomes. LEVEL OF EVIDENCE: Therapeutic study, Level I.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/métodos , Pérdida de Sangre Quirúrgica/prevención & control , Imagen por Resonancia Magnética , Procedimientos Quirúrgicos Mínimamente Invasivos/métodos , Osteoartritis de la Rodilla/cirugía , Cuidados Preoperatorios/métodos , Cirugía Asistida por Computador/métodos , Anciano , Anciano de 80 o más Años , Artroplastia de Reemplazo de Rodilla/instrumentación , Pérdida de Sangre Quirúrgica/estadística & datos numéricos , Transfusión Sanguínea/estadística & datos numéricos , Clavos Ortopédicos , Femenino , Humanos , Imagenología Tridimensional , Prótesis de la Rodilla , Masculino , Persona de Mediana Edad , Procedimientos Quirúrgicos Mínimamente Invasivos/instrumentación , Modelos Anatómicos , Tempo Operativo , Estudios Prospectivos , Cirugía Asistida por Computador/instrumentación , Resultado del TratamientoRESUMEN
Pain after total knee arthroplasty (TKA) represents a common observation in about 20% of the patients after surgery. Some of these painful knees require early revision surgery within 5 years. Obvious causes of failure might be identified with clinical examinations and standard radiographs only, whereas the unexplained painful TKA still remains a challenge for the surgeon. It is generally accepted that a clear understanding of the failure mechanism in each case is required prior considering revision surgery. A practical 10-step diagnostic algorithm is described for failure analysis in more detail. The evaluation of a painful TKA includes an extended history, analysis of the type of pain, psychological exploration, thorough clinical examination including spine, hip and ankle, laboratory tests, joint aspiration and test infiltration, radiographic analysis and special imaging techniques. It is also important to enquire about the length and type of conservative therapy. Using this diagnostic algorithm, a sufficient failure analysis is possible in almost all patients with painful TKA.
Asunto(s)
Algoritmos , Artroplastia de Reemplazo de Rodilla/efectos adversos , Prótesis de la Rodilla , Dolor Postoperatorio/diagnóstico , Falla de Prótesis , Anciano , Artroplastia de Reemplazo de Rodilla/métodos , Enfermedad Crónica , Análisis de Falla de Equipo/métodos , Femenino , Estudios de Seguimiento , Humanos , Masculino , Persona de Mediana Edad , Osteoartritis de la Rodilla/diagnóstico por imagen , Osteoartritis de la Rodilla/cirugía , Manejo del Dolor , Dimensión del Dolor , Dolor Postoperatorio/cirugía , Complicaciones Posoperatorias/diagnóstico , Complicaciones Posoperatorias/cirugía , Radiografía , Reoperación/métodos , Medición de Riesgo , Resultado del TratamientoRESUMEN
Silicon nanowires have been introduced into P3HT:[60]PCBM solar cells, resulting in hybrid organic/inorganic solar cells. A cell efficiency of 4.2% has been achieved, which is a relative improvement of 10% compared to a reference cell produced without nanowires. This increase in cell performance is possibly due to an enhancement of the electron transport properties imposed by the silicon nanowires. In this paper, we present a novel approach for introducing the nanowires by mixing them into the polymer blend and subsequently coating the polymer/nanowire blend onto a substrate. This new onset may represent a viable pathway to producing nanowire-enhanced polymer solar cells in a reel to reel process.
RESUMEN
BACKGROUND: The 2-5-year results for the treatment of deep infection of total knee arthroplasty (TKA) after two-stage reimplantation are presented. An articulating temporary antibiotic spacer prosthesis (TASP) and a standardized antibiotic regimen were used. PATIENTS AND METHODS: In a prospective study, 33 consecutive patients were treated with TASP. This articulating spacer was made on the table by cleaning and autoclaving removed parts of the TKA. Intravenous double antibiotic therapy in combination with rifampin was given for 10 days, followed by oral therapy for 4 weeks. RESULTS: At a mean follow-up period of 47 months (31-67), three patients had reinfection (success rate 91%). The average Hospital for Special Surgery knee score increased from 67 points (44-84) to 85 points (53-97) after reimplantation. Based on these results, 24 knees (73%) were rated excellent, five (15%) were rated good, three (9%) were rated fair, and one patient (3%) had a poor result. Complications included one case of temporary peroneal palsy, one dislocation of the spacer due to an insufficient extensor mechanism, and one fracture of the tibia due to substantial primary metaphyseal bone loss. CONCLUSION: Using TASP, the disadvantages of joint fixation between the two stages could be reduced. There was no difference in the reinfection rate compared with procedures using fixed spacer blocks. TASP facilitates reimplantation and yields good functional results.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/efectos adversos , Infecciones Relacionadas con Prótesis/etiología , Infecciones Relacionadas con Prótesis/cirugía , Anciano , Femenino , Humanos , Estudios Longitudinales , Masculino , Persona de Mediana Edad , Reoperación , Resultado del TratamientoRESUMEN
Infections in orthopedics and traumatology are particularly challenging for the treating physician due to changing epidemiology and bacteriology, in particular immunosenescent patients and antimicrobial resistance. Numerous exogenous and endogenous factors contribute to the onset of bone/joint infection. Known clinical entities include osteitis/osteomyelitis, arthritis, prosthesis-associated infection and spondylitis/spondylodiscitis. Knowledge of epidemiology, bacteriology, and clinic and healing processes in infections leads to a better understanding of the various treatment strategies. Cephalosporin, fosfomycin, glycopeptide, lincosamide, oxazolidinones, ansamycins und fusidic acids represent the standard therapeutic agents in orthopedics and traumatology. Fluoroquinolones, glycylcyclines and lipopeptides are new and possibly promising alternatives. The most important indices of antibiotic agents used in everyday practice are discussed. In complicated cases, collaboration with a specialist for infectious diseases results in improved therapeutic results.
Asunto(s)
Antibacterianos/uso terapéutico , Infecciones Bacterianas/diagnóstico , Infecciones Bacterianas/tratamiento farmacológico , Enfermedades Óseas Infecciosas/diagnóstico , Enfermedades Óseas Infecciosas/tratamiento farmacológico , Infecciones Relacionadas con Prótesis/diagnóstico , Infecciones Relacionadas con Prótesis/tratamiento farmacológico , Heridas y Lesiones/diagnóstico , Heridas y Lesiones/tratamiento farmacológico , Humanos , Ortopedia/métodos , Ortopedia/tendenciasRESUMEN
The fabrication of silicon nanowire-based solar cells on silicon wafers and on multicrystalline silicon thin films on glass is described. The nanowires show a strong broadband optical absorption, which makes them an interesting candidate to serve as an absorber in solar cells. The operation of a solar cell is demonstrated with n-doped nanowires grown on a p-doped silicon wafer. From a partially illuminated area of 0.6 cm(2) open-circuit voltages in the range of 230-280 mV and a short-circuit current density of 2 mA cm(-2) were obtained.
RESUMEN
Minimally invasive total knee arthroplasty is a logical and further improvement of the good results achieved with minimally invasive unicondylar knee arthroplasty. The terminology for minimally invasive surgery (MIS) is confusing and comparison of different techniques is therefore difficult. A simple separation between less invasive and minimally invasive techniques will be presented. Besides the approach, minimally invasive surgical principles are very important. MIS in total knee arthroplasty is discussed very controversially at the moment. The preliminary results of these new techniques are very promising. Up to now there is much more feeling then knowing. Important questions (risk-benefit analysis, which technique for which patient and surgeon, education and cost-effectiveness) must be addressed by the proponents of this MIS technique. Step by step learning of these new techniques (evolution instead of revolution) in specific education centres is strongly recommended. Ultimately, patients and surgeons will have to decide whether these new techniques will only be a modern trend or represent the future.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/métodos , Procedimientos Quirúrgicos Mínimamente Invasivos/métodos , Artroplastia de Reemplazo de Rodilla/educación , Educación Médica Continua , Alemania , Humanos , Prótesis de la Rodilla , Procedimientos Quirúrgicos Mínimamente Invasivos/educación , Procedimientos Quirúrgicos Mínimamente Invasivos/tendencias , Ortopedia/educación , Evaluación de Procesos y Resultados en Atención de Salud , Complicaciones Posoperatorias/etiología , Complicaciones Posoperatorias/prevención & control , Diseño de Prótesis , Cirugía Asistida por Computador/métodos , Instrumentos QuirúrgicosRESUMEN
Different minimally invasive techniques have been introduced for total knee arthroplasty. With the mini-midvastus incision technique, all deformities and patients can basically be treated. As the surgeon gains experience, this technique can be applied as part of day-to-day clinical routine. Surgery is done in front of the patient. All important landmarks are visible. Most patients benefit from the new surgical technique. Mobilisation and rehabilitation are possible sooner than after an open procedure. The risk of component malalignment and the overall complication rate do not appear to be any higher. In a prospective study 100 consecutive patients with the mean age of 67 (54 to 83) years were treated using the mini-midvastus incision technique. Mean Knee Society Scores (KSS) increased from 55/62 preoperatively to 82/65 (Knee/Function) after 7-10 days, to 92/86 after 6 weeks and to 93/92 after 12 months. Preoperative mean flexion was 106 degrees (75-140 degrees ), 92 degrees (75-140 degrees ) on day 7-10 after surgery, 113 degrees (90-140 degrees ) after 6 weeks and 128 degrees (90-140 degrees ) after 12 months. The average skin incision was 10.5 (7-13.5) cm long. The mean surgical time of 98 (70-145) min is 20 min longer than required for our conventional technique. Long-standing radiographs in all patients showed an overall alignment of +/-3 degrees in 93%. The complication rate was 5%, which is comparable to that with an open procedure.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/normas , Procedimientos Quirúrgicos Mínimamente Invasivos/normas , Osteoartritis de la Rodilla/cirugía , Anciano , Anciano de 80 o más Años , Benchmarking/normas , Contraindicaciones , Análisis de Falla de Equipo , Femenino , Estudios de Seguimiento , Alemania , Humanos , Prótesis de la Rodilla/normas , Masculino , Persona de Mediana Edad , Complicaciones Posoperatorias/etiología , Estudios Prospectivos , Diseño de Prótesis , Instrumentos Quirúrgicos/normasRESUMEN
Valgus arthritic knees can basically be operated on by either a standard medial or a specific lateral approach. The classic lateral approach according to Keblish has some advantages, but also some disadvantages, relative to the standard medial parapatellar approach. A less invasive lateral approach means that osteotomy of tibia tubercle and eversion of the patella is no longer necessary. In view of our positive experiences with the minimally invasive surgical technique used for implantation of the lateral unicondylar prosthesis and for total knee arthroplasty in the case of varus knees, we have developed a minimally invasive lateral technique for use in valgus knees. The approach is a modification of the classic lateral approach used by Keblish. The procedure involves a lateral mini-arthrotomy with no need for osteotomy of the tubercle or eversion of the patella, and the surgery takes place step by step from a lateral approach. Modified cutting standard instruments are used. All operations have been carried out using "conventional navigation" without computers. This consists in preoperative planning based on radiographs of the whole leg, intraoperative controls before and after bone cuts, planning of the rotational positioning of the femur and tibia and postoperative checks of the alignment on standing radiographs of the whole leg. Preliminary results observed in the first 63 consecutive patients (average age 45-85 years) with contract valgus deformity [average 12 degrees valgus (6-19 degrees )] are very promising. Since 2004 we have used minimally invasive medial and lateral mini-midvastus approaches routinely for nearly all our primary total knee arthroplasties.