RESUMEN
This paper deals with the combined effects of immune response and osseointegration because of the lack of comprehensive studies on this topic. An antibacterial Ti surface was considered because of the high risk of infection for titanium bone implants. A chemically treated Ti6Al4 V alloy [Ti64(Sr-Ag)] with a microporous and Sr-Ag doped surface was compared to a polished version (Ti64) regarding protein adsorption (albumin and fibronectin) and osteoimmunomodulation. Characterization via fluorescence microscopy and zeta potential showed a continuous fibronectin layer on Ti64(Sr-Ag), even with preadsorbed albumin, while it remained filamentous on Ti64. Macrophages (differentiated from THP-1 monocytes) were cultured on both surfaces, with viability and cytokine release analyzed. Differently from Ti64, Ti64(Sr-Ag) promoted early anti-inflammatory responses and significant downregulation of VEGF. Ti64(Sr-Ag) also enhanced human bone marrow mesenchymal cell differentiation toward osteoblasts, when a macrophage-conditioned medium was used, influencing ALP production. Surface properties in relation to protein adsorption and osteoimmunomodulation were discussed.
RESUMEN
CO2:H2-based gas fermentation with acetogenic Clostridium species are at an early stage of development. This work exploited the Adaptive Laboratory Evolution technique to improve the growth of C. carboxidivorans P7 on CO2 and H2. An adapted strain with decreased growth lag phase and improved biomass production was obtained. Genomic analysis revealed a conserved frameshift mutation in the catalytic subunit of the hexameric hydrogenase gene. The resulted truncated protein variant, most likely lacking its functionality, suggests that other hydrogenases might be more efficient for H2-based growth of this strain. Furthermore, the adapted strain generated hexanol as primary fermentation product. For the first time, hexanol was produced directly from CO2:H2 blend, achieving the highest maximum productivity reported so far via gas fermentation. Traces of valerate, pentanol, eptanol and octanol were observed in the fermentation broth. The adapted strain shows promising to enrich the product spectrum targetable by future gas fermentation processes.
Asunto(s)
Dióxido de Carbono , Hidrogenasas , Fermentación , Clostridium/genética , Hexanoles , HidrógenoRESUMEN
In this work, we discuss the use of epsilon-near-zero (ENZ) metamaterials to efficiently couple light radiated by a dipolar source to an in-plane waveguide. We exploit both enhanced and directional emission provided by ENZ metamaterials to optimize the injection of light into the waveguide by tuning the metal fill factor. We show that a net increase in intensity injected into the waveguide with respect to the total power radiated by the isolated dipole can be achieved in experimentally feasible conditions. We think the proposed system may open up new opportunities for several optical applications and integrated technologies, especially for those limited by outcoupling efficiency and emission rate.
RESUMEN
Neural probes arein vivobrain-invasive devices that record and manipulate neural circuits using electricity, light, or drugs. The capability to shine distinct wavelengths and control their respective output locations for activation or deactivation of specific groups of neurons is desirable but remains unachieved. Here, we discuss our probe's capability to deliver two independently controllable wavelengths (450 and 655 nm) in the location(s) of interest using nanophotonic directional couplers and ring resonators. These nanophotonics are scalable to dozens of outputs without significantly increasing the device's lateral dimensions. Furthermore, they are entirely passive and thus do not require electrical input that results in heat generation. Besides, we integrate a high number of electrodes for a simultaneous neural activity readout. Thus, we overcome the challenges associated with multicolor illumination for neural devices by exploiting the capability of miniaturizable, passive probes to deliver two different frequencies in several areas of interest. These devices open the path towards investigating thein vivoelectrical signal propagation under the individual or simultaneous activation or inhibition of distinct brain regions.
Asunto(s)
Encéfalo/fisiología , Electrodos , Nanotecnología , Neuronas/fisiología , Simulación por Computador , Rayos Láser , Fenómenos ÓpticosRESUMEN
Acoustophoretic microfluidic devices are promising non-contact and high-throughput tools for particle manipulation. Although the effectiveness of this technique has been widely demonstrated for applications based on micrometer-sized particles, the manipulation and focusing of sub-micrometer ones is challenging due to the presence of acoustic streaming. In this article, our study has the aim to investigate and understand which geometrical parameters could be changed to limit the acoustic streaming effect. We numerically study the well-known rectangular cross section of a microfluidic channel and perform a parametric study of the aspect ratio for several particle sizes. The efficiency of the focusing, is explored for different sized particles in order to identify a trend for which the acoustic streaming does not drastically influence the focusing motion of the particles. The possibility to efficiently separate different solid components in liquid suspensions, i.e. the whole blood, is crucial for all applications that require a purified medium such as plasmapheresis or an increase of the concentration of specific subpopulation as the outcome, such as proteomics, cancer biomarker detections and extracellular vesicles separation.
Asunto(s)
Acústica/instrumentación , Dispositivos Laboratorio en un Chip , Técnicas Analíticas Microfluídicas/métodos , Microesferas , Algoritmos , Fenómenos Mecánicos , Técnicas Analíticas Microfluídicas/instrumentación , Modelos Teóricos , Tamaño de la PartículaRESUMEN
Resistive switching (RS) devices are considered as the most promising alternative to conventional random access memories. They interestingly offer effective properties in terms of device scalability, low power-consumption, fast read/write operations, high endurance and state retention. Moreover, neuromorphic circuits and synapse-like devices are envisaged with RS modeled as memristors, opening the route toward beyond-Von Neumann computing architectures and intelligent systems. This work investigates how the RS properties of zinc oxide thin films are related to both sputtering deposition process and device configuration, i.e. valence change memory and electrochemical metallization memory (ECM). Different devices, with an oxide thickness ranging from 50-250 nm, are fabricated and deeply characterized. The electrical characterization evidences that, differently from typical nanoscale amorphous oxides employed for resistive RAMs (HfO x , WO x , etc), sub-micrometric thicknesses of polycrystalline ZnO layers with ECM configuration are needed to achieve the most reliable devices. The obtained results are deeply discussed, correlating the RS mechanism to material nanostructure.
RESUMEN
Polydimethylsiloxane (PDMS) is a well-known biocompatible polymer employed for many applications in the biomedical field. In this study, the biocompatibility and versatility of PDMS was tested setting up a microdevice devoted to the purification and analysis of nucleic acids. The PDMS microdevice was demonstrated to successfully fulfill all requirements of genetic analyses such as genotyping and pathogen DNA identification both in multiplex and real-time PCR, suggesting the possibility to carry out a molecular test directly on-chip. Moreover, the PDMS microdevice was successfully applied to the purification and detection of disease biomarkers, such as microRNAs related to cancer or heart disease. On-chip microRNA purification was demonstrated starting from clinically relevant samples, i.e. plasma, serum, tissue biopsies. Significantly, the purification and the transcription of microRNA into cDNA occur in the same PDMS chamber, saving time and labor for the overall analysis. Again, the PDMS microdevice was confirmed as a notable candidate for compact, rapid, easy-to-use molecular tests.
Asunto(s)
ADN/análisis , Dimetilpolisiloxanos/química , Dispositivos Laboratorio en un Chip , MicroARNs/análisis , Biomarcadores/análisis , Técnicas de Genotipaje/instrumentación , Técnicas de Genotipaje/métodos , Humanos , MicroARNs/aislamiento & purificación , Reacción en Cadena de la Polimerasa Multiplex/instrumentación , Reacción en Cadena de la Polimerasa Multiplex/métodos , Reacción en Cadena en Tiempo Real de la Polimerasa/instrumentación , Reacción en Cadena en Tiempo Real de la Polimerasa/métodos , Staphylococcus aureus/genética , Streptococcus pneumoniae/genéticaRESUMEN
Manganese oxides (MnxOy) are considered as a promising catalyst alternative to platinum in fuel cell applications. In fact, a proper catalyst is needed in order to facilitate the oxygen reduction reaction (ORR) at the cathode, and platinum is considered the best material due to its low overpotential for this reaction. Contrary to platinum, MnxOy is inexpensive, environmentally friendly and can be shaped into several nanostructures; furthermore, most of them show significant electro-catalytic performance. Several strategies have been carried out in order to increase their efficiency, by preparing light and high-surface area materials. In this framework, nanofibres are among the most promising nanostructures that can be used for this purpose. In this work, a study of the thermal, morphological and catalytic behavior of MnxOy nanofibres obtained through the electrospinning technique is proposed. Emphasis is given to the thermal evolution of the precursors, proposing a possible crystallization mechanism of the different manganese oxides obtained. It turns out that manganese oxide nanofibres exhibit good catalytic performance for the ORR, comparable to those obtained by using Pt-based catalysts.
RESUMEN
The use of TiO2 nanotube (NT) arrays as templates for hydrothermal conversion of one-dimensional barium titanate (BaTiO3) structures is considered a promising synthesis approach, even though the formation mechanisms are not yet fully understood. Herein we report a nanostructural study by means of XRD and (HR)TEM of high aspect ratio TiO2-NTs hydrothermally converted into BaTiO3. The nanostructure shows two different and well-defined regions: at the top the conversion involves complete dissolution of NTs and subsequent precipitation of BaTiO3 crystals by homogeneous nucleation, followed by the growth of dendritic structures by aggregation and oriented attachment mechanisms. Instead, at the bottom, the low liquid/solid ratio, due to the limited amount of Ba solution that infiltrates the NTs, leads to the rapid crystallization of such a solution into BaTiO3, thus allowing the NTs to act as a template for the formation of highly oriented one-dimensional nanostructures. The in-depth analysis of the structural transformations that take place during the formation of the rod-like arrays of BaTiO3 could help elucidate the conversion mechanism, thus paving the way for the optimization of the synthesis process in view of new applications in energy harvesting devices, where easy and low temperature processing, controlled composition, morphology and functional properties are required.
RESUMEN
The detection of low abundant biomarkers, such as circulating microRNAs, demands innovative detection methods with increased resolution, sensitivity and specificity. Here, a biofunctional surface was implemented for the selective capture of microRNAs, which were detected through fluorescence enhancement directly on a photonic crystal. To set up the optimal biofunctional surface, epoxy-coated commercially available microscope slides were spotted with specific anti-microRNA probes. The optimal concentration of probe as well as of passivating agent were selected and employed for titrating the microRNA hybridization. Cross-hybridization of different microRNAs was also tested, resulting negligible. Once optimized, the protocol was adapted to the photonic crystal surface, where fluorescent synthetic miR-16 was hybridized and imaged with a dedicated equipment. The photonic crystal consists of a dielectric multilayer patterned with a grating structure. In this way, it is possible to take advantage from both a resonant excitation of fluorophores and an angularly redirection of the emitted radiation. As a result, a significant fluorescence enhancement due to the resonant structure is collected from the patterned photonic crystal with respect to the outer non-structured surface. The dedicated read-out system is compact and based on a wide-field imaging detection, with little or no optical alignment issues, which makes this approach particularly interesting for further development such as for example in microarray-type bioassays.
Asunto(s)
Técnicas Biosensibles/métodos , Fluorescencia , MicroARNs/análisis , Fotones , Humanos , Límite de Detección , MicroARNs/química , Espectrometría de FluorescenciaRESUMEN
Hepatitis C virus (HCV) is one of the main causes of chronic liver disease worldwide. The diagnosis and monitoring of HCV infection is a crucial need in the clinical management. The conventional diagnostic technologies are challenged when trying to address molecular diagnostics, especially because they require a complex and time-consuming sample preparation phase. Here, a new concept based on surface functionalization was applied to viral RNA purification: first of all polydimethylsiloxane (PDMS) flat surfaces were modified to hold RNA adsorption. After a careful chemical and morphological analysis of the modified surfaces, the functionalization protocols giving the best RNA adsorbing surfaces were applied to PDMS microdevices. The functionalized microdevices were then used for RNA purification from HCV infected human plasma samples. RNA purification and RT were successfully performed in the same microdevice chamber, saving time of analysis, reagents, and labor. The PCR protocol for HCV cDNA amplification was also implemented in the microdevice, demonstrating that the entire process of HCV analysis, from plasma to molecular readout, could be performed on-chip. Not only HCV but also other microdevice-based viral RNA detection could therefore result in a successful Point-of-Care (POC) diagnostics for resource-limited settings.
Asunto(s)
Hepacivirus/química , Dispositivos Laboratorio en un Chip , ARN Viral/sangre , ARN Viral/aislamiento & purificación , Adsorción , Dimetilpolisiloxanos/química , Humanos , Reacción en Cadena de la Polimerasa , ARN Viral/química , Propiedades de SuperficieRESUMEN
We report a novel sensing method for fluorescence-labelled microRNAs (miRNAs) spotted on an all-dielectric photonic structure. Such a photonic structure provides an enhanced excitation and a directional beaming of the emitted fluorescence, resulting in a significant improvement of the overall signal collected. As a result, the Limit of Detection (LoD) is demonstrated to decrease by a factor of about 50. A compact read-out system allows a wide-field imaging-based detection, with little or no optical alignment issues, which makes this approach particularly interesting for further development for example in microarray-type bioassays.
Asunto(s)
Técnicas Biosensibles/métodos , MicroARNs/análisis , Fotones , Espectrometría de Fluorescencia/métodos , Fluorescencia , Humanos , Límite de Detección , MicroARNs/genéticaRESUMEN
Local piezoresponse and piezoelectric output voltage were evaluated on ZnO thin films deposited by radio-frequency magnetron sputtering on hard Si/Ti/Au and flexible Cu-coated polyimide substrates. Three different thicknesses of ZnO films were studied (285 nm, 710 nm, and 1380 nm), focusing on characteristics like crystallinity, grain size, surface roughness, and morphology. Independent of the nature of the metal layer and the substrate, our results show that thicker films presented a higher level of crystallinity and a preferential orientation along the c-axis direction, as well as a lower density of grain boundaries and larger crystal sizes. The improvement of the crystalline structure of the material directly enhances its piezoelectric properties, as confirmed by the local characterizations performed by piezoresponse force microscopy and by the evaluation of the output voltage generation under the application of a periodical mechanical deformation on the whole film. In particular, the highest value of the d33 coefficient obtained (8 pm V(-1)) and the highest generated output voltage (0.746 V) belong to the thickest films on hard and flexible substrates, respectively. These results envision the use of ZnO thin films--particularly on flexible substrates--as conformable, reliable, and efficient active materials for use in nanosensing, actuation, and piezoelectric nanogenerators.