RESUMEN
Optical control is achieved on the excited state energy transfer between spatially separated donor and acceptor molecules, both coupled to the same optical mode of a cavity. The energy transfer occurs through the formed hybrid polaritons and can be switched on and off by means of ultraviolet and visible light. The control mechanism relies on a photochromic component used as donor, whose absorption and emission properties can be varied reversibly through light irradiation, whereas in-cavity hybridization with acceptors through polariton states enables a 6-fold enhancement of acceptor/donor contribution to the emission intensity with respect to a reference multilayer. These results pave the way for synthesizing effective gating systems for the transport of energy by light, relevant for light-harvesting and light-emitting devices, and for photovoltaic cells.
RESUMEN
CMOS-compatible materials for efficient energy harvesters at temperatures characteristic for on-chip operation and body temperature are the key ingredients for sustainable green computing and ultralow power Internet of Things applications. In this context, the lattice thermal conductivity (κ) of new group IV semiconductors, namely Ge1-xSnx alloys, are investigated. Layers featuring Sn contents up to 14 at.% are epitaxially grown by state-of-the-art chemical-vapor deposition on Ge buffered Si wafers. An abrupt decrease of the lattice thermal conductivity (κ) from 55 W/(m·K) for Ge to 4 W/(m·K) for Ge0.88Sn0.12 alloys is measured electrically by the differential 3ω-method. The thermal conductivity was verified to be independent of the layer thickness for strained relaxed alloys and confirms the Sn dependence observed by optical methods previously. The experimental κ values in conjunction with numerical estimations of the charge transport properties, able to capture the complex physics of this quasi-direct bandgap material system, are used to evaluate the thermoelectric figure of merit ZT for n- and p-type GeSn epitaxial layers. The results highlight the high potential of single-crystal GeSn alloys to achieve similar energy harvest capability as already present in SiGe alloys but in the 20 °C-100 °C temperature range where Si-compatible semiconductors are not available. This opens the possibility of monolithically integrated thermoelectric on the CMOS platform.
RESUMEN
Optical biosensors based on micro/nanofibers are highly valuable for probing and monitoring liquid environments and bioactivity. Most current optical biosensors, however, are still based on glass, semiconductors, or metallic materials, which might not be fully suitable for biologically relevant environments. Here, we introduce biocompatible and flexible microfibers from lotus silk as microenvironmental monitors that exhibit waveguiding of intrinsic fluorescence as well as of coupled light. These features make single-filament monitors excellent building blocks for a variety of sensing functions, including pH probing and detection of bacterial activity. These results pave the way for the development of new and entirely eco-friendly, potentially multiplexed biosensing platforms.
Asunto(s)
Técnicas Biosensibles , Nanofibras , Técnicas Biosensibles/métodos , Seda , Semiconductores , BacteriasRESUMEN
Tracking droplets in microfluidics is a challenging task. The difficulty arises in choosing a tool to analyze general microfluidic videos to infer physical quantities. The state-of-the-art object detector algorithm You Only Look Once (YOLO) and the object tracking algorithm Simple Online and Realtime Tracking with a Deep Association Metric (DeepSORT) are customizable for droplet identification and tracking. The customization includes training YOLO and DeepSORT networks to identify and track the objects of interest. We trained several YOLOv5 and YOLOv7 models and the DeepSORT network for droplet identification and tracking from microfluidic experimental videos. We compare the performance of the droplet tracking applications with YOLOv5 and YOLOv7 in terms of training time and time to analyze a given video across various hardware configurations. Despite the latest YOLOv7 being 10% faster, the real-time tracking is only achieved by lighter YOLO models on RTX 3070 Ti GPU machine due to additional significant droplet tracking costs arising from the DeepSORT algorithm. This work is a benchmark study for the YOLOv5 and YOLOv7 networks with DeepSORT in terms of the training time and inference time for a custom dataset of microfluidic droplets.
RESUMEN
The beam shape coefficients for cylindrical vector modes are of great importance for other researchers to reproduce our results, however they were accidentally reported incorrectly in our recently published manuscript [Opt. Express30(14), 24407 (2022)10.1364/OE.458674]. This erratum reports the correct form for the two expressions. Two typographical errors in auxiliary equations are also reported and two labels in particle time of flight probability density function plots are fixed.
RESUMEN
Rationale: Mesenchymal stromal cells (MSCs)-derived extracellular vesicles (EVs) emerged as an innovative strategy for the treatment of chronic disorders such as osteoarthritis (OA). Biological activity of EVs is generally driven by their cargo, which might be influenced by microenvironment. Therefore, pre-conditioning strategies, including modifications in culture conditions or oxygen tension could directly impact on MSCs paracrine activity. In this study we selected an appropriate preconditioning system to induce cells to perform the most suitable therapeutic response by EV-encapsulated bioactive factors. Methods: A xeno-free supplement (XFS) was used for isolation and expansion of MSCs and compared to conventional fetal bovine serum (FBS) culture. Bone Marrow-derived MSCs (BMSCs) were pre-conditioned under normoxia (20% O2) or under hypoxia (1% O2) and EVs production was evaluated. Anti-OA activity was evaluated by using an in vitro inflammatory model. miRNA content was also explored, to select putative miRNA that could be involved in a biological function. Results: Modulation of IL-6, IL-8, COX-2 and PGE2 was evaluated on hACs simultaneously treated with IL-1α and BMSC-derived EVs. FBS-sEVs exerted a blunt inhibitory effect, while a strong anti-inflammatory outcome was achieved by XFS-sEVs. Interestingly, in both cases hypoxia pre-conditioning allowed to increase EVs effectiveness. Analysis of miRNA content showed the upregulation in XFS-hBMSC-derived EVs of miRNA known to have a chondroprotective role, such as let-7b-5p, miR-17, miR-145, miR-21-5p, miR-214-3p, miR-30b-5p, miR-30c-5p. Activated pathways and target genes were investigated in silico and upregulated miRNAs functionally validated in target cells. MiR-145 and miR-214 were found to protect chondrocytes from IL-1α-induced inflammation and to reduce production of pro-inflammatory cytokines. Conclusions: XFS medium was found to be suitable for isolation and expansion of MSCs, secreting EVs with a therapeutic cargo. The application of cells cultured exclusively in XFS overcomes issues of safety associated with serum-containing media and makes ready-to-use clinical therapies more accessible.
Asunto(s)
Técnicas de Cultivo de Célula , Células Madre Mesenquimatosas , MicroARNs , Osteoartritis , Humanos , Células Madre Mesenquimatosas/química , Células Madre Mesenquimatosas/citología , Vesículas Extracelulares/química , Osteoartritis/metabolismo , Osteoartritis/terapia , Cartílago/patología , FN-kappa B/metabolismo , Dinoprostona/metabolismo , Condrocitos/metabolismo , MicroARNs/química , Albúmina Sérica Bovina/química , Interleucina-1alfa/metabolismo , Técnicas In VitroRESUMEN
In the last few years, single-molecule localization (SMLM) techniques have been used to address biological questions in different research fields. More recently, super-resolution has also been proposed as a quantitative tool for quantifying protein copy numbers at the nanoscale level. In this scenario, quantitative approaches, mainly based on stepwise photobleaching and quantitative SMLM assisted by calibration standards, offer an exquisite tool for investigating protein complexes. This primer focuses on the basic concepts behind quantitative super-resolution microscopy, also providing strategies to overcome the technical hurdles that could limit their application.
Asunto(s)
Microscopía , Imagen Individual de Molécula , Imagen Individual de Molécula/métodos , ProteínasRESUMEN
Thermoelectric polyelectrolytes are emerging as ideal material platform for self-powered bio-compatible electronic devices and sensors. However, despite the nanoscale nature of the ionic thermodiffusion processes underlying thermoelectric efficiency boost in polyelectrolytes, to date no evidence for direct probing of ionic diffusion on its relevant length and time scale has been reported. This gap is bridged by developing heat-driven hybrid nanotransistors based on InAs nanowires embedded in thermally biased Na+ -functionalized (poly)ethyleneoxide, where the semiconducting nanostructure acts as a nanoscale probe sensitive to the local arrangement of the ionic species. The impact of ionic thermoelectric gating on the nanodevice electrical response is addressed, investigating the effect of device architecture, bias configuration and frequency of the heat stimulus, and inferring optimal conditions for the heat-driven nanotransistor operation. Microscopic quantities of the polyelectrolyte such as the ionic diffusion coefficient are extracted from the analysis of hysteretic behaviors rising in the nanodevices. The reported experimental platform enables simultaneously the ionic thermodiffusion and nanoscale resolution, providing a framework for direct estimation of polyelectrolytes microscopic parameters. This may open new routes for heat-driven nanoelectronic applications and boost the rational design of next-generation polymer-based thermoelectric materials.
RESUMEN
The radical polymerization process of acrylate compounds is, nowadays, numerically investigated using classical force fields and reactive molecular dynamics, with the aim to probe the gel-point transition as a function of the initial radical concentration. In the present paper, the gel-point transition of the 1,6-hexanediol dimethacrylate (HDDMA) is investigated by a coarser force field which grants a reduction in the computational costs, thereby allowing the simulation of larger system sizes and smaller radical concentrations. Hence, the polymerization is investigated using reactive classical molecular dynamics combined with a dynamical approach of the nonequilibrium molecular dynamics (D-NEMD). The network structures in the polymerization process are probed by cluster analysis tools, and the results are critically compared with the similar all-atom system, showing a good agreement.
RESUMEN
The realization of intelligent, self-powered components and devices exploiting the piezoelectric effect at large scale might greatly contribute to improve our efficiency in using resources, albeit a profound redesign of the materials and architectures used in current electronic systems would be necessary. Piezoelectricity is a property of certain materials to generate an electrical bias in response to a mechanical deformation. This effect enables energy to be harvested from strain and vibration modes, and to sustain the power of actuators, transducers, and sensors in integrated networks, such as those necessary for the Internet of Thing. Polymers, combining structural flexibility with lightweight construction and ease of processing, have been largely used in this framework. In particular, the poly(vinylidene fluoride) [PVDF, (CH2CF2) n ] and its copolymers exhibit strong piezoelectric response, are biocompatibile, can endure large strains and can be easily shaped in the form of nanomaterials. Confined geometries, improving crystal orientation and enhancing piezoelectricity enable the fabrication of piezoelectric nanogenerators, which satisfy many important technological requirements, such as conformability, cheap fabrication, self-powering, and operation with low-frequency mechanical inputs (Hz scale). This account reports on piezoelectric polymer nanofibers made by electrospinning. This technique enables the formation of high-aspect-ratio filaments, such as nanowires and nanofibers, through the application of high electric fields (i.e., on the order of hundreds of kV/m) and stretching forces to a polymeric solution. The solution might be charged with functional, organic or inorganic, fillers or dopants. The solution is then fed at a controlled flow rate through a metallic spinneret or forms a bath volume, from which nanofibers are delivered. Fibers are then collected onto metallic surfaces, and upon a change of the collecting geometry, they can form nonwovens, controlled arrays, or isolated features. Nanofibers show unique features, which include their versatility in terms of achievable chemical composition and chemico-physical properties. In addition, electrospinning can be up-scaled for industrial production. Insight into the energy generation mechanism and how the interaction among fibers can be used to enhance the piezoelectric performance are given in this paper, followed by an overview of fiber networks as the active layer in different device geometries for sensing, monitoring, and signal recognition. The use of biodegradable polymers, both natural and synthetic, as critically important building blocks of the roadmap for next-generation piezoelectric devices, is also discussed, with some representative examples. In particular, biodegradable materials have been utilized for applications related to life science, such as the realization of active scaffolds and of electronic devices to be placed in intimate contact with living tissues and organs. Overall, these materials show many relevant properties that can be of very high importance for building next-generation, sustainable energy harvesting, self-rechargeable devices and electronic components, for use in several different fields.
RESUMEN
Recently, random lasing in complex networks has shown efficient lasing over more than 50 localised modes, promoted by multiple scattering over the underlying graph. If controlled, these network lasers can lead to fast-switching multifunctional light sources with synthesised spectrum. Here, we observe both in experiment and theory high sensitivity of the network laser spectrum to the spatial shape of the pump profile, with some modes for example increasing in intensity by 280% when switching off 7% of the pump beam. We solve the nonlinear equations within the steady state ab-initio laser theory (SALT) approximation over a graph and we show selective lasing of around 90% of the strongest intensity modes, effectively programming the spectrum of the lasing networks. In our experiments with polymer networks, this high sensitivity enables control of the lasing spectrum through non-uniform pump patterns. We propose the underlying complexity of the network modes as the key element behind efficient spectral control opening the way for the development of optical devices with wide impact for on-chip photonics for communication, sensing, and computation.
RESUMEN
Optical forces on microspheres inside hollow core photonic crystal fibers (HC-PCFs) are often predicted using a ray optics model, which constrains its validity based on wavelength and microsphere sizes. Here, we introduce a rigorous treatment of the electromagnetic forces based on the Lorenz-Mie theory, which involves analytical determination of beam shape coefficients for the optical modes of a HC-PCF. The method is more practicable than numerical approaches and, in contrast with ray optics models, it is not limited by system size parameters. Time of flight measurements of microspheres flying through the HC-PCF lead to results consistent with the Lorenz-Mie predictions.
RESUMEN
The molecular orientation in polymer fibers is investigated for the purpose of enhancing their optical properties through nanoscale control by nanowires mixed in electrospun solutions. A prototypical system, consisting of a conjugated polymer blended with polyvinylpyrrolidone, mixed with WO3 nanowires, is analyzed. A critical strain rate of the electrospinning jet is determined by theoretical modeling at which point the polymer network undergoes a stretch transition in the fiber direction, resulting in a high molecular orientation that is partially retained after solidification. Nearing a nanowire boundary, local adsorption of the polymer and hydrodynamic drag further enhance the molecular orientation. These theoretical predictions are supported by polarized scanning near-field optical microscopy experiments, where the dichroic ratio of the light transmitted by the fiber provides evidence of increased orientation nearby nanowires. The addition of nanowires to enhance molecular alignment in polymer fibers might consequently enhance properties such as photoluminescence quantum yield, polarized emission, and tailored energy migration, exploitable in light-emitting photonic and optoelectronic devices and for sensing applications.
RESUMEN
Photocurable polymers are used ubiquitously in 3D printing, coatings, adhesives, and composite fillers. In the present work, the free radical polymerization of photocurable compounds is studied using reactive classical molecular dynamics combined with a dynamical approach of the nonequilibrium molecular dynamics (D-NEMD). Different concentrations of radicals and reaction velocities are considered. The mechanical properties of the polymer resulting from 1,6-hexanediol dimethacrylate systems are characterized in terms of viscosity, diffusion constant, and activation energy, whereas the topological ones through the number of cycles (polymer loops) and cyclomatic complexity. Effects like volume shrinkage and delaying of the gel point for increasing monomer concentration are also predicted, as well as the stress-strain curve and Young's modulus. Combining ab initio, reactive molecular dynamics, and the D-NEMD method might lead to a novel and powerful tool to describe photopolymerization processes and to original routes to optimize additive manufacturing methods relying on photosensitive macromolecular systems.
RESUMEN
We demonstrate a graphene-MoS2 architecture integrating multiple field-effect transistors (FETs), and we independently probe and correlate the conducting properties of van der Waals coupled graphene-MoS2 contacts with those of the MoS2 channels. Devices are fabricated starting from high-quality single-crystal monolayers grown by chemical vapor deposition. The heterojunction was investigated by scanning Raman and photoluminescence spectroscopies. Moreover, transconductance curves of MoS2 are compared with the current-voltage characteristics of graphene contact stripes, revealing a significant suppression of transport on the n-side of the transconductance curve. On the basis of ab initio modeling, the effect is understood in terms of trapping by sulfur vacancies, which counterintuitively depends on the field effect, even though the graphene contact layer is positioned between the backgate and the MoS2 channel.
RESUMEN
Ultrathin molecular films deposited on a substrate are ubiquitously used in electronics, photonics, and additive manufacturing methods. The nanoscale surface instability of these systems under uniaxial compression is investigated here by molecular dynamics simulations. We focus on deviations from the homogeneous macroscopic behavior due to the discrete, disordered nature of the deformed system, which might have critical importance for applications. The instability, which develops in the elastoplastic regime above a finite critical strain, leads to the growth of unidimensional wrinkling up to strains as large as 0.5. We highlight both the dominant wavelength and the amplitude of the wavy structure. The wavelength is found to scale geometrically with the film length, λâL, up to a compressive strain of ε≃0.4 at least, depending on the film length. The onset and growth of the wrinkling under small compression are quite well described by an extended version of the familiar square-root law in the strain ε observed in macroscopic systems. Under large compression (εâ³0.25), we find that the wrinkling amplitude increases while leaving the cross section nearly constant, offering a novel interpretation of the instability with a large amplitude. The contour length of the film topography is not constant under compression, which is in disagreement with the simple accordion model. These findings might be highly relevant for the design of novel and effective wrinkling and buckling patterns and architectures in flexible platforms for electronics and photonics.
Asunto(s)
Nanoestructuras/química , Fuerza Compresiva , Membranas Artificiales , Electricidad Estática , Estrés Mecánico , Propiedades de SuperficieRESUMEN
Single Layer Graphene (SLG) has emerged as a critically important nanomaterial due to its unique optical and electrical properties and has become a potential candidate for biomedical applications, biosensors, and tissue engineering. Due to its intrinsic 2D nature, SLG is an ideal surface for the development of large-area biosensors and, due to its biocompatibility, can be easily exploited as a substrate for cell growth. The cellular response to SLG has been addressed in different studies with high cellular affinity for graphene often detected. Still, little is known about the molecular mechanism that drives/regulates the cellular adhesion and migration on SLG and SLG-coated interfaces with respect to other substrates. Within this scenario, we used quantitative super-resolution microscopy based on single-molecule localization to study the molecular distribution of adhesion proteins at the nanoscale level in cells growing on SLG and glass. In order to reveal the molecular mechanisms underlying the higher affinity of biological samples on SLG, we exploited stochastic optical reconstruction microscopy (STORM) imaging and cluster analysis, quantifying the super-resolution localization of the adhesion protein vinculin in neurons and clearly highlighting substrate-related correlations. Additionally, a comparison with an epithelial cell line (Chinese Hamster Ovary) revealed a cell dependent mechanism of interaction with SLG.
RESUMEN
The delivery of optical signals from an external light source to a nanoscale waveguide is highly important for the development of nanophotonic circuits. However, the efficient coupling of external light energy into nanophotonic components is difficult and still remains a challenge. Herein, we use an external silica nanofiber to light up an organic-inorganic hybrid nanowaveguide, namely, a system composed of a polymer filament doped with MoS2 quantum dots. Nanofiber-excited nanowaveguides in a crossed geometry are found to asymmetrically couple excitation signals along two opposite directions, with different energy dissipation resulting in different colors of the light emitted by MoS2 quantum dots and collected from the waveguide terminals. Interestingly, rainbow-like light in the hybrid waveguide is achieved by three-in-one mixing of red, green, and blue components. This heterodimensional system of dots in waveguide represents a significant advance toward all-optical routing and full-color display in integrated nanophotonic devices.
RESUMEN
Intrinsically conducting polymers (ICPs) are widely used to fabricate biomaterials; their application in neural tissue engineering, however, is severely limited because of their hydrophobicity and insufficient mechanical properties. For these reasons, soft conductive polymer hydrogels (CPHs) are recently developed, resulting in a water-based system with tissue-like mechanical, biological, and electrical properties. The strategy of incorporating ICPs as a conductive component into CPHs is recently explored by synthesizing the hydrogel around ICP chains, thus forming a semi-interpenetrating polymer network (semi-IPN). In this work, a novel conductive semi-IPN hydrogel is designed and synthesized. The hybrid hydrogel is based on a poly(N-isopropylacrylamide-co-N-isopropylmethacrylamide) hydrogel where polythiophene is introduced as an ICP to provide the system with good electrical properties. The fabrication of the hybrid hydrogel in an aqueous medium is made possible by modifying and synthesizing the monomers of polythiophene to ensure water solubility. The morphological, chemical, thermal, electrical, electrochemical, and mechanical properties of semi-IPNs were fully investigated. Additionally, the biological response of neural progenitor cells and mesenchymal stem cells in contact with the conductive semi-IPN was evaluated in terms of neural differentiation and proliferation. Lastly, the potential of the hydrogel solution as a 3D printing ink was evaluated through the 3D laser printing method. The presented results revealed that the proposed 3D printable conductive semi-IPN system is a good candidate as a scaffold for neural tissue applications.
Asunto(s)
Hidrogeles , Tejido Nervioso , Conductividad Eléctrica , Polímeros , Ingeniería de TejidosRESUMEN
Circularly polarized (CP) lasers derived from low-cost and renewable raw sources are attracting increasing attention in photonics and material science. Here, we present a facile and effective approach to fabricate CP lasers by the evaporation-induced assembly of cellulose nanocrystals (CNCs) and a laser dye. The obtained laser exhibits a controlled chiral nematic structure, which acts as a chiral optical cavity, and varied chiral coupling interactions. It is shown that the CNC-based laser can modify the polarization state of the laser into left-handed polarization, leading to strong CP laser emission (CPLE) with a dissymmetry factor up to 0.35. The chiral nematic CNC structure proves to be a versatile yet straightforward strategy to generate strong and tailored CPLE.