RESUMEN
The glycosaminoglycan hyaluronan (HA) plays important roles in diverse physiological functions where the distribution of its molecular weight (MW) can influence its behavior and is known to change in response to disease conditions. During inflammation, HA undergoes a covalent modification in which heavy chain subunits of the inter-alpha-inhibitor family of proteins are transferred to its structure, forming heavy chain-HA (HCâ¢HA) complexes. While limited assessments of HCâ¢HA have been performed previously, determining the size distribution of its HA component remains a challenge. Here, we describe a selective method for extracting HCâ¢HA from mixtures that yields material amenable to MW analysis with a solid-state nanopore sensor. After demonstrating the approach in vitro, we validate extraction of HCâ¢HA from osteoarthritic human synovial fluid as a model complex biological matrix. Finally, we apply our technique to pathophysiology by measuring the size distributions of HCâ¢HA and total HA in an equine model of synovitis.
Asunto(s)
Ácido Hialurónico , Nanoporos , Humanos , Animales , Caballos , Ácido Hialurónico/química , alfa-Globulinas/metabolismo , Inflamación , Líquido SinovialRESUMEN
In this work, polyvinyl alcohol (PVA)- and soy protein isolate (SPI)-based scaffolds were prepared by physical cross-linking using the freeze-thaw method. The PVA/SPI ratio was varied to examine the individual effects of the two constituents. The physicochemical properties of the fabricated scaffolds were analyzed through Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry. The SPI concentration significantly affected the properties of scaffolds, such as the extent of gelation (%), pore size, porosity, degradation, swelling, and surface wettability. The in vitro degradation of fabricated hydrogels was evaluated in phosphate-buffered saline and lysozyme solution for a duration of 14 days. The in vitro compatibility of prepared hydrogels was evaluated by the MTT assay with NIH-3T3 cells (fibroblast). The water vapor transmission rate (WVTR) assays showed that all hydrogels possessed WVTR values in the range of 2000-2500 g m-2 day-1, which is generally recommended for ideal wound dressing. Overall, the obtained results reveal that the fabricated scaffolds have excellent biocompatibility, mechanical strength, porosity, stability, and degradation rate and thus carry enormous potential for tissue engineering applications. Furthermore, a full-thickness wound healing study performed in rats supported them as a promising wound dressing material.
Asunto(s)
Alcohol Polivinílico , Proteínas de Soja , Animales , Vendajes , Hidrogeles/química , Ratones , Alcohol Polivinílico/química , Ratas , Ingeniería de Tejidos/métodosRESUMEN
The rationale behind the success of nickel free or with extremely low nickel austenitic high manganese and nitrogen stabilized stainless steels is adverse influences of nickel ion on human body. Replacement of nickel by nitrogen and manganese provides a stable microstructure and facilitates better biocompatibility in respect of the conventional 316L austenitic stainless steel (316L SS). In this investigation, biocompatibility of the high-manganese and nitrogen stabilized (Fe-18Cr-22Mn-0.65N) austenitic stainless steel was studied and found highly promising.In vitrocell culture and cell proliferation (MTT) assays were performed on this stainless steel and assessed in respect of the 316L SS. Both the steels exhibited similar cell growth behavior. Furthermore, an enhancement was observed in cell proliferation on the Fe-18Cr-22Mn-0.65N SS after surface modification by ultrasonic shot peening (USP). The mean percent proliferation of the MG-63 cells increased from ≈88% for Un-USP to 98% and 105% for USP 3-2 and USP 2-2 samples, respectively for 5 d of incubation. Interestingly,in vivoanimal study performed in rabbits for 3 and 6 weeks showed callus formation and sign of union without any allergic reaction.
Asunto(s)
Materiales Biocompatibles , Aleaciones Dentales , Prótesis e Implantes , Acero Inoxidable , Materiales Biocompatibles/química , Materiales Biocompatibles/toxicidad , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Aleaciones Dentales/química , Aleaciones Dentales/toxicidad , Humanos , Manganeso/química , Ensayo de Materiales , Nitrógeno/química , Acero Inoxidable/química , Acero Inoxidable/toxicidadRESUMEN
Tissue engineering is a promising approach to overcome the severe worldwide shortage of healthy donor corneas. In this work, we have developed a silk-gelatin composite scaffold using electrospinning and permeation techniques to achieve the properties comparable to cornea analog. In particular, we present the fabrication and comparative evaluation of the novel gelatin sheets consisting of silk fibroin nanofibers, which are prepared using silk fibroin (SF) (in formic acid) and SF (in aqueous) electrospun scaffolds, for its suitability as corneal stromal analogs. All the fabricated samples were treated with ethanol vapor (T) to physically crosslink the silk nanofibers. Micro/nano-scale features of the fabricated scaffolds were analyzed using scanning electron microscopy micrographs. Fourier transform infrared spectroscopy revealed characteristic peaks of polymeric functional groups and modifications upon ethanol vapor treatment. Transparency of the scaffolds was determined using UV-visible spectra. Among all the fabricated samples, the gelatin-permeated SF (in formic acid; T) scaffold showed the highest level of transparency, i.e., 77.75 ± 2.3%, which is similar to that of the native cornea (â¼70%-90% [variable with age group]) with healthy acute vision. Contact angle of the samples was studied to estimate the hydrophilicity of the scaffolds. All the scaffolds except non-treated SF (in aqueous; NT) were found to be significantly stable up to 14 days when incubated in phosphate buffered saline at 37°C. Treated samples showed significantly better stability, both physically and microscopically, in comparison to nontreated samples. Proliferation and viability assays of rabbit corneal fibroblast cells (SIRC) and mouse fibroblast cells (L929 RFP) when cultured on fabricated scaffolds revealed remarkable cellular compatibility with gelatin-permeated SF (in formic acid; T) scaffolds compared to SF (in aqueous; T). Unlike other reports in the existing literature, this work presents the design and development of a nanofibrous silk-gelatin composite that exhibits acceptable transparency, cellular biocompatibility, as well as improved mechanical stability comparable to that of native cornea. Therefore, we anticipate that the fabricated novel scaffold is likely to be a good candidate for corneal tissue construct. Moreover, among the fabricated scaffolds, the outcomes depict gelatin-permeated SF (in formic acid; T) composite scaffold to be a better candidate as a corneal stromal analog that carries properties of both the silk and gelatin, i.e., optimal transparency, better stability, and enhanced cytocompatibility.
Asunto(s)
Fibroínas , Nanofibras , Animales , Córnea , Gelatina , Ratones , Conejos , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Novel glutathione (GSH) redox-sensitive thiolated vitaminE-PEG1000-succinate (TPGH-SH) was synthesized by conjugating TPGS with 4-amino thiophenol (4-ATP) and confirmed by FTIR and NMR studies. Following, docetaxel (DTX) loaded, cetuximab (CTB) conjugated redox sensitive TPGS-SH nanoparticles (TPGS-SH NP) were prepared by dialysis method and screened for size, charge, DTX entrapment, which revealed that size, surface charge and percent entrapment are in the range of 183-227 nm, +18 to +26 mV and 68-71%. SEM, TEM, AFM have reflected the spherical and uniform size of NP with a smooth surface. In-vitro release studies were performed in media containing different concentrations of GSH to study their effect on drug release and drug release of up to 94.5%, at pH 5.5, GSH 20 mM, is observed within 24 h. The pH/redox sensitivity studies revealed the better stability of NP at higher pH and lower GSH concentrations. In-vitro cytotoxicity, cellular uptake, migration and apoptotic assays, performed on A549 cells, have proved that targeted formulation produced higher cytotoxicity (significantly less IC50 value) and uptake and also prevented cell migration. Pharmacokinetic and histopathological screening were performed on CF rats, which demonstrated promising results. The in-vivo efficacy studies on benzo(a)pyrene induced mice lung cancer model showed that targeted TPGS-SH NP has significantly reduced the cell number than the model control.
Asunto(s)
Antineoplásicos , Neoplasias Pulmonares , Nanopartículas , Animales , Línea Celular Tumoral , Receptores ErbB , Neoplasias Pulmonares/tratamiento farmacológico , Ratones , Oxidación-Reducción , Tamaño de la Partícula , Polietilenglicoles , Ratas , Vitamina ERESUMEN
We demonstrate cell-substrate interaction on aluminium oxide thin-film in metal-insulator-metal structure followed by the change in dielectric characteristics of Al2O3 as a function of progression of cellular growth. The theoretical calculation of the fabricated biosensor reveals that the changes in the intrinsic elemental parameters are mainly attributed to the cell-induced behavioural changes.
Asunto(s)
Óxido de Aluminio , Técnicas Biosensibles , Proliferación Celular , Metales , MioblastosRESUMEN
In this study, we report the fabrication of poly-L-lysine (PLL) coated large surface TiO2 and SnO2 based biosensing devices to analyze the influence of the functional behaviour of primary cortical neuronal cells. Through frequency-dependent impedance study, we observed an increase in the impedance values initially most likely due to cell adhesion, proliferation and differentiation processes leading to an increase in both the single-cell mass as well as overall cellular mass; however, it got decreased eventually with the progression of various other cellular functions including neural activity, synapse formation and neuron-neuron communication. Typically, formation and regulation of the neuronal junction i.e., synapses noticeably affected the functional behaviour of the fabricated biosensing device by increasing the neuronal communication and thereby improving the flow of current by altering the thin film resistance and capacitance. Further, the neuro-electrical phenomenon is validated by fitting the experimental impedance data to an equivalent electrical circuit model. A significant shift in the Nyquist plot was also observed visually, which indicates that this alternation is primarily due to change in characteristic behaviour of the fabricated biosensing device. Hence, we anticipate that the fabricated PLL coated large surface TiO2 and SnO2 based biosensing device can serve as a promising tool to monitor the influence of the functional behaviour of neuronal cells.
Asunto(s)
Neuronas , Titanio , Compuestos de EstañoRESUMEN
The primary goal of this study is to highlight the rheological and mechanical properties of a new blend composed of naturally-derived hydrogel materials- psyllium husk (PH) and gelatin (G) for its potential use in three-dimensional (3D) printing technology. The mixtures were prepared at various weight ratios of 100PH, 75PH + 25G and 50PH + 50G. A suitable selection of the printable ink was made based on the preliminary screening steps of manual filament drop test and layer stacking by 3D printing. Printing of the common features such as hexagon and square grids helped evaluating shape fidelity of the chosen ink. Although 50PH + 50G blend was found meeting most of the criteria for an ideal 3D printable ink, rheological and mechanical characterizations have been performed for all the ratios of polymeric blends. This study documents the correlation between various factors of rheology that should be taken into account while categorizing any biomaterial as a printable ink. Yield stress was measured as 18.59 ± 4.21 Pa, 268.74 ± 13.56 Pa and 109.16 ± 9.85 Pa for 50PH + 50G, 75PH + 25G and 100PH, respectively. Similarly, consistency index (K) and flow index (n) were calculated using the power law equation and found as 49.303 ± 4.17, 530.59 ± 10.92, 291.82 ± 10.53 and 0.275 ± 0.04, 0.05 ± 0.005, 0.284 ± 0.04 for 50PH + 50G, 75PH + 25G and 100PH, respectively. The loss modulus (Gâ³) was observed dominating over storage modulus (G') for 50PH + 50G, that depicts its liquid-like property; whereas storage modulus (G') was found dominating in case of 75PH + 25G and 100PH, indicating their solid-like characteristics. In addition, the loss tangent value (tan δ) of 50PH + 50G was observed exceeding unity (1.05), supporting its plastic behavior, unlike 75PH + 25G (0.5) and 100PH (0.33) whose loss tangent values were estimated less than unity revealing their elastic behavior. Also, 50PH + 50G was found to have the highest mechanical strength amongst the three blends with a Young's modulus of 9.170 ± 0.0881 kPa.
Asunto(s)
Gelatina/química , Tinta , Psyllium/química , Módulo de Elasticidad , Hidrogeles/química , Polisacáridos/química , Impresión Tridimensional , Reología , ViscosidadRESUMEN
Aim: To design, optimize and evaluate docetaxel-loaded chitosan nanoparticles with (targeted) and without (nontargeted) cetuximab conjugation for the treatment of non-small-cell lung cancer (NSCLC). Materials & methods: Risk-assessment, optimization, in vitro characterizations, stability assessments, release studies, cell-culture studies were performed along with histopathology, pharmacokinetic and anticancer efficacy studies. Results: The nanoparticles of desired particle size (152.59 ± 3.90 nm to 180.63 ± 5.21 nm) which could sustain drug release for up to 70 h, were obtained. The cell-culture studies demonstrated the superiority of the formulations over Docel™. The pharmacokinetic evaluation showed the excellent systemic bioavailability of prepared NPs. The histopathology screening revealed lesser toxicity of both the nontargeted and targeted formulations. The targeted nanoformulation significantly reduced tumor growth than the nontargeted formulation and Docel. Conclusion: These results demonstrate the therapeutic potential of the prepared nanoformulation. After proper clinical validation, it could be a promising approach for the treatment of NSCLC.
Asunto(s)
Carcinoma de Pulmón de Células no Pequeñas , Cetuximab , Quitosano , Neoplasias Pulmonares , Nanopartículas , Carcinoma de Pulmón de Células no Pequeñas/tratamiento farmacológico , Línea Celular Tumoral , Cetuximab/uso terapéutico , Docetaxel , Portadores de Fármacos/uso terapéutico , Humanos , Neoplasias Pulmonares/tratamiento farmacológico , NanomedicinaRESUMEN
As the authors were working on similar projects on liposomes at the same time, the 3D figures of Fig. 3 bi and Fig. 3 bii were inadvertently misplaced.
RESUMEN
Triple-negative breast (TNBC) cancer that is upregulated with epidermal growth factor receptor (EGFR), and devoid of both the hormonal receptors and epidermal growth factor receptor 2 (HER 2), has led to a concept of treating TNBC with EGFR-targeted therapeutics. The combination of paclitaxel (PTX) and piperine (PIP) may improve the bioavailability of paclitaxel for cancer therapy. TPGS (vit E-PEG 1000-succinate)-coated liposomes were prepared with PTX alone or in combination with PIP, and either with (targeted) or without (non-targeted) cetuximab (CTX) conjugation. The Bradford assay indicated that 75% of CTX has been conjugated on the liposomes. The size and percent encapsulation of PTX&PIP co-loaded liposomes were found to be in the range of 204 to 218 nm and 31-73%, respectively. The drug release rate was found to be higher at pH 5.5 in comparison with release at pH 6.4 and pH 7.4. Cellular uptake and toxicity studies on MDA-MB-231 cells showed that PTX&PIP co-loaded targeted liposomes have demonstrated superior uptake and cytotoxicity than their non-targeted counterparts. The IC50 values of both of the liposomal formulations were found to be significantly higher than PTX control. Indeed, combining PIP with PTX control has improved the cytotoxicity of PTX control, which proved the synergistic anticancer effect of PIP. Lyophilized liposomes showed an excellent stability profile with the size range between 189 and 210 nm. Plasma stability study revealed a slight increase in the particle size due to the adsorption of plasma proteins on the surface of liposomes. The long-term stability study also indicated that liposomes were stable at 4°C.
Asunto(s)
Alcaloides/uso terapéutico , Antineoplásicos Fitogénicos/uso terapéutico , Benzodioxoles/uso terapéutico , Paclitaxel/uso terapéutico , Piperidinas/uso terapéutico , Alcamidas Poliinsaturadas/uso terapéutico , Neoplasias de la Mama Triple Negativas/tratamiento farmacológico , Alcaloides/farmacología , Antineoplásicos Fitogénicos/metabolismo , Antineoplásicos Fitogénicos/farmacología , Protocolos de Quimioterapia Combinada Antineoplásica , Benzodioxoles/farmacología , Línea Celular Tumoral , Composición de Medicamentos , Estabilidad de Medicamentos , Sinergismo Farmacológico , Receptores ErbB/efectos de los fármacos , Femenino , Liofilización , Humanos , Liposomas , Paclitaxel/metabolismo , Paclitaxel/farmacología , Piperidinas/farmacología , Alcamidas Poliinsaturadas/farmacología , Receptor ErbB-2RESUMEN
Biocompatible soy protein isolate/silk fibroin (SPI/SF) nanofibrous scaffolds were successfully fabricated through electrospinning a novel protein blend SPI/SF. Prepared nanofibers were treated with ethanol vapor to obtain an improved water-stable structure. Fabricated scaffolds were characterized through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), UV-VIS spectrophotometry and image analysis. The mean diameters of SPI/SF electrospun fibers were observed ranging between 71 and 160 nm. The scaffolds were found significantly stable for a prolong duration at the room temperature as well as at 37 °C, when placed in phosphate buffered saline, nutrient medium, and lysozyme-containing solution. The potential of fabricated scaffolds for skin tissue regeneration was evaluated by in vitro culturing of standard cell lines i.e., fibroblast cells (L929-RFP (red fluorescent protein) and NIH-3T3) and melanocytes (B16F10). The outcomes revealed that all the fabricated nanofibrous scaffolds were non-toxic towards normal mammalian cells. In addition, healing of full-thickness wound in rats within 14 days after treatment with a nanofibrous scaffold demonstrated its suitability as a potential wound dressing material. Interestingly, we found that nanofibers induced a noticeable reduction in the proliferation rate of B16F10 melanoma cells.
Asunto(s)
Fibroínas/farmacología , Nanofibras/administración & dosificación , Seda/química , Piel/efectos de los fármacos , Proteínas de Soja/farmacología , Cicatrización de Heridas/efectos de los fármacos , Animales , Vendajes , Bombyx/metabolismo , Adhesión Celular/efectos de los fármacos , Línea Celular , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Fibroblastos/efectos de los fármacos , Masculino , Mamíferos , Melanocitos/efectos de los fármacos , Ratones , Células 3T3 NIH , Ratas , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Ingeniería de Tejidos/métodos , Andamios del TejidoRESUMEN
The light absorption and emission characteristics of DNA biodots (DNA-BD), along with biocompatibility, give them a high potential for use in various medical applications, particularly in diagnostic purpose. DNA, under high pressure and temperature, condenses to form luminescent biodots. The objective of this research is to develop DNA-biodots (BD) loaded and cetuximab conjugated targeted theranostic liposomes of etoposide for lung cancer imaging and therapy. Theranostic liposomes were prepared by using the solvent injection method and characterized for their particle size, polydispersity, zeta potential, encapsulation efficiency, and pH-dependent in-vitro release, SEM, TEM AFM, EDX, and XRD. The t50% (time at which 50% of the drug releases from the preparation) of the formulations was pH-dependent, with a significant increase in the release at lower pH (5.5). To kill A549 adenocarcinoma cells, the etoposide (control) required significantly (p < 0.05) higher drug concentrations in comparison to non-targeted and; the non-targeted formulation required more concentrations in comparison to targeted liposomes. The in-vivo results demonstrated that CTX-TPGS decorated theranostic liposomes could be a promising carrier for lung theranostics due to their nano-size and selectivity towards EGFR overexpressed cells which provided an improved NSCLC targeted delivery of ETP in comparison to the non-targeted and control formulations.
Asunto(s)
ADN , Portadores de Fármacos , Sistemas de Liberación de Medicamentos , Terapia Molecular Dirigida , Puntos Cuánticos , Nanomedicina Teranóstica , Animales , Apoptosis , Materiales Biocompatibles/química , Carcinoma de Pulmón de Células no Pequeñas/diagnóstico por imagen , Carcinoma de Pulmón de Células no Pequeñas/terapia , Línea Celular Tumoral , Cetuximab/administración & dosificación , ADN/química , Diagnóstico por Imagen , Modelos Animales de Enfermedad , Relación Dosis-Respuesta a Droga , Portadores de Fármacos/química , Liberación de Fármacos , Estabilidad de Medicamentos , Femenino , Humanos , Concentración de Iones de Hidrógeno , Cinética , Liposomas/química , Neoplasias Pulmonares/diagnóstico por imagen , Neoplasias Pulmonares/terapia , Modelos Biológicos , Terapia Molecular Dirigida/métodos , Tamaño de la Partícula , Puntos Cuánticos/química , Ratas , Análisis Espectral , Ensayos Antitumor por Modelo de XenoinjertoRESUMEN
Drug-resistant tuberculosis (TB) is one of the most lethal diseases, and it is imperative to exploit an advanced drug formulation for its effective treatment. This work aims to develop a mannose receptor-targeted bioadhesive chitosan nanoparticles for effective drug-resistant tuberculosis treatment. The clofazimine loaded chitosan nanoparticles were formulated; their size, charge, polydispersity (PDI), surface morphology, entrapment efficiency (EE) and in-vitro release pattern were established. Also, cellular uptake study on C2C12 cell lines and anti-mycobacterial activity against H37Rv (a standard strain of Mycobacterium tuberculosis) were evaluated. The particle sizes of formulated chitosan nanoparticles were in the range of 132-184 nm and EE was also found to be between 73 and 95%. The functionalization of bioadhesive chitosan nanoparticles with mannose was confirmed by infrared spectroscopy (FTIR). The uptake studies on the C2C12 cell lines showed that mannosylated nanoparticles were more efficiently internalized when compared to non-targeted nanoparticles. Further, luciferase reporter phage (LRP) assay against H37Rv strain showed that clofazimine nanoparticles were found to be 49.5 times superior in terms of inhibition and anti-mycobacterial activity than free clofazimine. This excellent activity might be attributed to enhanced drug delivery with a promising bioadhesion property of chitosan-based nanoparticles.
RESUMEN
This paper demonstrates the fabrication of a compartmentalized microfluidic device with docking sites to position a single neuron or a cluster of 5-6 neurons along with varying length of microgrooves and the optimization process for culturing primary mammalian neurons at low densities. The principle of centrifugation was employed to situate cells in desired locations followed by the application of a fluid flow to remove the extra or unwanted cells lying in the vicinity of the located neurons. The neuronal cell density was optimized by seeding 103 cells and 104 cells/microfluidic device. The speed of centrifugation was optimized as 1500 rpm for 1 min and a cell density of greater than or equal to 104 cells/microfluidic device was found to be suitable for loading maximum number of docking sites. The outcomes of the simulated experiments was found to be in compliance with the experimemtal verifications. Furthermore, the cells cultured within the microfluidic device were assessed for immunocytochemical staining and the axonal growth was quantified with the help of an Axofluidic software. Although, several in vitro microfluidic platforms have been developed that facilitate the investigations where communication between neurons or between neurons and other cell types is concerned, none of the partitioned devices so far has reported the presence of docking sites along with an array of grooves of varying lengths. These physically connected but fluidically isolated compartmentalized microfluidic devices may serve us in analysing the activity of a low density of neurons and the influence of axonal length in setting up a communication with other cell type.This platform is useful to gain insights into the processes of synapse formation, axonal guidance, cell-cell interaction, to name a few.
Asunto(s)
Técnicas de Cultivo de Célula/instrumentación , Dispositivos Laboratorio en un Chip , Neuronas/citología , Animales , Axones/metabolismo , Recuento de Células , Centrifugación , RatasRESUMEN
Most important evaluating criteria for in vitro skeletal muscle models include the extent of differentiation and the degree of alignment in the tissue model. Substrate micropatterning is considered as an effective tool as it recreates in vivo like cellular microenvironment and helps in understanding the fundamental concepts and mechanisms underlying myogenesis. However, the influence of micropatterning based contact guidance cues over satellite cell alignment and myotube formation needs to be explored and studied further. In the present work, we demonstrate the regulation of myotube size control and alignment through the substrate micropatterning. For this purpose, primary myoblast cells (i.e., satellite cells) isolated from rat hind limb muscle were characterized and cultured for a period of 14 days on micropatterned glass substrates processed by the microchannnel flowed plasma process. Several characteristic parameters of muscle differentiation, including the fusion index, maturation index, and average width of the myotubes were quantified. The functional behavior of cultured myotubes exhibiting spontaneous contractions was assessed through kymograph to determine the twitch frequency. In addition, we evaluated the degree of alignment of myotubes on micropatterned substrates through examining orientation order parameter and two-dimensional fast Fourier transform analysis. Altogether, the outcomes reveal that the contact guidance cues arising due to micropatterning of the substrates could be a key regulator for controlling the size and degree of alignment of myotubes during the myogenesis process.
Asunto(s)
Comunicación Celular/fisiología , Análisis de Fourier , Desarrollo de Músculos/fisiología , Fibras Musculares Esqueléticas/metabolismo , Mioblastos/metabolismo , Citoesqueleto de Actina/metabolismo , Animales , Adhesión Celular/fisiología , Técnicas de Cultivo de Célula/métodos , Diferenciación Celular , Línea Celular , Proliferación Celular , Células Cultivadas , Contracción Muscular/fisiología , Fibras Musculares Esqueléticas/citología , Músculo Esquelético/citología , Músculo Esquelético/crecimiento & desarrollo , Mioblastos/citología , Ratas , Propiedades de SuperficieRESUMEN
In the present study, we propose a platform for topical wound dressing material using a polydimethylsiloxane (PDMS) scaffold in order to enhance the skin healing process. In vitro co-culture assessment of epidermal-origin mouse B16-F10 melanocyte cells and mouse L929 fibroblast cells in three-dimensional polymeric scaffolds has been carried out towards developing bio-stable, interconnected, highly macroporous, PDMS based tissue-engineered scaffolds, using the salt leaching method. To determine a suitable ratio of salt to PDMS pre-polymer in the scaffold, two different samples with ratios 2:1 and 3:1 [w/w], were fabricated. Effective pore sizes of both scaffolds were observed to lie in the desirable range of 152-165 µm. In addition, scaffolds were pre-coated with collagen and investigated as a podium for culturing the chosen cells (fibroblast and melanocyte cells). Experimental results demonstrate not only a high proliferative potential of the skin tissue-specific cells within the fabricated PDMS based scaffolds but also confirm the presence of several other essential attributes such as high interconnectivity, optimum porosity, excellent mechanical strength, gaseous permeability, promising cell compatibility, water absorption capability and desired surface wettability. Therefore, scaffolds facilitate a high degree of cellular adhesion while providing a microenvironment necessary for optimal cellular infiltration and viability. Thus, the outcomes suggest that PDMS based macroporous scaffold can be used as a potential candidate for skin dressing material. In addition, the fabricated PDMS scaffolds may also be exploited for a plethora of other applications in tissue engineering and drug delivery.
RESUMEN
Psyllium husk or isabgol contains xylan backbone linked with arabinose, rhamnose, and galacturonic acid units (arabinoxylans). In this study, we demonstrate the fabrication and characterization of a macroporous three-dimensional (3D) composite scaffold by mixing psyllium husk powder (PH) and gelatin (G) in different ratios, viz.100 PH, 75/25 PH/G, and 50/50 PH/G (w/w), using an EDC-NHS coupling reaction followed by freeze-drying method. The reaction was performed in aqueous as well as in alcoholic media to determine the most appropriate solvent system for this purpose. The mechanical strength of the scaffold system was improved from 151 to 438 kPa. The fabricated scaffolds exhibited enhanced structural stability, remarkable swelling capacity, and escalated cell growth and proliferation. ATR-FTIR analysis showed the presence of amide and ester bonds indicating covalent crosslinking. SEM micrographs revealed the porous nature of the scaffolds with pores ranging from 30 to 150 µm, and further pore size distribution curve indicated that 75/25 PH/G (w/w%) EDC-NHS-alcohol scaffold exhibited the best fit to the Gaussian distribution. Swelling capacity of the 100 PH EDC-NHS-alcohol scaffolds was found to be nearly 40% from its original weight in 48 h. MTT assay using fibroblast cells revealed ~ 80% cellular proliferation by 6th day within the fabricated scaffolds in comparison to control. Graphical Abstract á .
Asunto(s)
Gelatina/química , Psyllium/química , Andamios del Tejido/química , Animales , Materiales Biocompatibles/química , Línea Celular , Supervivencia Celular , Técnicas In Vitro , Fenómenos Mecánicos , Ratones , Microscopía Electrónica de Rastreo , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Sales de Tetrazolio/química , Tiazoles/químicaRESUMEN
Optogenetics is a new and emerging field that involves techniques of optics and genetic engineering to influence cellular functionality. In this work, we have successfully incorporated a non-selective cationic channel channelrhodopsin-2 (ChR2) into human hepatocellular carcinoma (HepG2) cells. A plasmid construct AAV-CAG-ChR2-GFP was used for liposomal transfection into the cells. ChR2 is a light sensitive membrane channel that opens upon illumination with blue light. Plasmid DNA isolation from E. coli XL 10 gold bacteria by alkaline lysis method resulted in a DNA concentration of 1150⯵g/mL. A significant difference (pâ¯<â¯0.05) was observed between the fluorescent intensities of transfected cells and the control. The percentage of transfected cells was estimated to be 41.26%. Overall, the study delivers an optimized methodology to produce the transfected HepG2 cells that can be controlled with the light stimulation. Although ChR2 has mostly been associated with excitable cells, we anticipate that its presence into HepG2 cells may also result changes in biological functionalities by modulating the concentration of cations inside the cell. Furthermore, the transfected HepG2 cells can be co-cultured with fibroblasts such as NIH 3T3 to form liver spheroids that can serve as models for toxicological and pharmacological studies.