Multiresponsive luminescent metal-organic framework for cooking oil adulteration detection and gallium(III) sensing.

A new 3D metal-organic framework {[Cd16(tr2btd)10(dcdps)16(H2O)3(EtOH)]∙15DMF}n (MOF 1, tr2btd = 4,7-di(1,2,4-triazol-1-yl)benzo-2,1,3-thiadiazole, H2dcdps = 4,4'-sulfonyldibenzoic acid) was obtained and its luminescent properties were studied. MOF 1 exhibited bright blue-green luminescence with a high quantum yield of 74 % and luminescence quenching response to a toxic natural polyphenol gossypol and luminescence enhancement response to some trivalent metal cations (Fe3+, Cr3+, Al3+ and Ga3+). The limit of gossypol detection was 0.20 µM and the determination was not interfered by the components of the cottonseed oil. The limit of detection of gallium(III) was 1.1 µM. It was demonstrated that MOF 1 may be used for distinguishing between the genuine sunflower oil and oil adulterated by crude cottonseed oil through qualitative luminescent and quantitative visual gossypol determination.

Portable and Recyclable Luminescent Lanthanide Coordination Polymer Film Sensors for Adenosine Triphosphate in Urine.

Adenosine triphosphate (ATP) is a small molecule that is released to the urine from bladder urothelial cells and the bladder mucosal band of the human body. In certain cases, ATP can serve as a biomarker in bladder disease. For the practical applicability of luminescent sensors for ATP in urine, it is significant to find a new strategy for making the detection progress simple and available for in-field urine analysis. Here, a novel luminescent lanthanide coordination polymer (Tb-BPA) was designed and synthesized for quick and sensitive detection of ATP through luminescence quenching with a quenching constant of 4.90 × 103 M-1 and a detection limit of 0.55 × 10-6 M. Besides, Tb-BPA has excellent anti-interference ability and can detect ATP in simulated urine with a small relative standard deviation (<4%). Moreover, the luminescent polyacrylonitrile nanofiber films modified by Tb-BPA were prepared by electrospinning and were used for ATP visual detection. Notably, this film is easy to recover and reuse, and maintains good detection performance after at least 7 cycles.

Highly sensitive sensing of DPA by lanthanide metal-organic frameworks and detection of fiber membranes.

The detection of 2,6-pyridinecarboxylic acid (DPA), as a biomarker of Bacillus anthracis, has attracted wide attention. In previous reports of DPA detection, fluorescent probes may not have high specificity. Therefore, the rational design and development of fluorescent sensors with excellent performance is of great significance for the detection of DPA. In this study, two novel lanthanide metal-organic frameworks (Ln-MOFs) were synthesized by hydrothermal method using 3-polyfluorobiphenyl-3 ', 4,5 ' -tricarboxylic acid (H2FPTA) as ligand. Studies have shown that Ln-MOFs can detect DPA in real time, with detection limits of 0.54 µM and 0.67 µM, respectively, and have a high recovery rate (95 % -108 %) in fetal bovine serum. As a self-calibration sensor, other substances in the blood can be clearly distinguished by a two-dimensional fluorescence code diagram. After the Ln-MOFs were spun into nanofiber membranes, they responded quickly to DPA. This increases practicability and provides a promising idea for the development of simple and efficient ratio sensors.

Ln-MOF-Based Hydrogel Films with Tunable Luminescence and Afterglow Behavior for Visual Detection of Ofloxacin and Anti-Counterfeiting Applications.

Highly selective and sensitive quantitative detection of ofloxacin (OFX) at ultralow concentrations in aqueous media and development of new afterglow materials remains a challenge. Herein, a new 2D water-stable lanthanide metal-organic framework (NIIC-2-Tb) is proposed, which exhibits high selectivity towards OFX through the luminescence quenching with the lowest detection limit (1.1 × 10-9 M) reported to date and a fast response within 6 s. In addition, the luminescent detection of OFX by NIIC-2-Tb is not affected by typical components of blood plasma and urine. The excellent sensing effect of NIIC-2-Tb is further utilized to prepare a composite functional sensing carrageenan hydrogel material for the rapid detection of OFX in meat in real time and the first discovery of impressive afterglow in MOF-based hydrogels. This study not only presents novel Ln-MOF materials and Ln-MOF-based hydrogel films for luminescent sensing of OFX, but also demonstrates color-tunable luminescent films with afterglow, which expands the application of composite luminescent materials for detection and anti-counterfeiting.

Synthesis of Novel Phosphorus-Containing Derivatives of 1,3,4-Trimethylglycoluril via the Birum-Oleksyszyn Reaction.

This work presents the synthesis of a new compound, 1-[aryl-(diphenylphosphono)methyl]-3,4,6-trimethylglycolurils, via the interaction of benzaldehyde and its mononitro- and monohydroxyderivatives with 1,3,4-trimethylglycoluril and triphenylphosphite. By varying the reaction conditions and the catalysts, the obtained product yields ranged from satisfactory to good. The diastereomers formed during the reaction were separated by semipreparative HPLC on the C18 stationary phase. The isolated diastereomers were characterized by 1H, 13C, and 31P NMR, and the structures of the diastereomers were confirmed using a single-crystal X-ray crystal structure analysis and quantum chemical calculations.

Exfoliation of 2D Metal-Organic Frameworks: toward Advanced Scalable Materials for Optical Sensing.

Two-dimensional metal-organic frameworks (MOFs) occupy a special place among the large family of functional 2D materials. Even at a monolayer level, 2D MOFs exhibit unique sensing, separation, catalytic, electronic, and conductive properties due to the combination of porosity and organo-inorganic nature. However, lab-to-fab transfer for 2D MOF layers faces the challenge of their scalability, limited by weak interactions between the organic and inorganic building blocks. Here, comparing three top-down approaches to fabricate 2D MOF layers (sonication, freeze-thaw, and mechanical exfoliation), The technological criteria have established for creation of the layers of the thickness up to 1 nm with a record aspect ratio up to 2*10^4:1. The freezing-thaw and mechanical exfoliation are the most optimal approaches; wherein the rate and manufacturability of the mechanical exfoliation rivaling the greatest scalability of 2D MOF layers obtained by freezing-thaw (21300:1 vs 1330:1 aspect ratio), leaving the sonication approach behind (with a record 900:1 aspect ratio) have discovered. The high quality 2D MOF layers with a record aspect ratio demonstrate unique optical sensitivity to solvents of a varied polarity, which opens the way to fabricate scalable and freestanding 2D MOF-based atomically thin chemo-optical sensors by industry-oriented approach.

Laser-Assisted Design of MOF-Derivative Platforms from Nano- to Centimeter Scales for Photonic and Catalytic Applications.

Laser conversion of metal-organic frameworks (MOFs) has recently emerged as a fast and low-energy consumptive approach to create scalable MOF derivatives for catalysis, energy, and optics. However, due to the virtually unlimited MOF structures and tunable laser parameters, the results of their interaction are unpredictable and poorly controlled. Here, we experimentally base a general approach to create nano- to centimeter-scale MOF derivatives with the desired nonlinear optical and catalytic properties. Five three- and two-dimensional MOFs, differing in chemical composition, topology, and thermal resistance, have been selected as precursors. Tuning the laser parameters (i.e., pulse duration from fs to ns and repetition rate from kHz to MHz), we switch between ultrafast nonthermal destruction and thermal decomposition of MOFs. We have established that regardless of the chemical composition and MOF topology, the tuning of the laser parameters allows obtaining a series of structurally different derivatives, and the transition from femtosecond to nanosecond laser regimes ensures the scaling of the derivatives from nano- to centimeter scales. Herein, the thermal resistance of MOFs affects the structure and chemical composition of the resulting derivatives. Finally, we outline the "laser parameters versus MOF structure" space, in which one can create the desired and scalable platforms with nonlinear optical properties from photoluminescence to light control and enhanced catalytic activity.

Experimental and Computational Investigation of the Oxime Bond Stereochemistry in c-Jun N-terminal Kinase 3 Inhibitors 11H-Indeno[1,2-b]quinoxalin-11-one Oxime and Tryptanthrin-6-oxime.

11H-Indeno[1,2-b]quinoxalin-11-one oxime (IQ-1) and tryptanthrin-6-oxime are potent c-Jun N-terminal kinase 3 (JNK-3) inhibitors demonstrating neuroprotective, anti-inflammatory and anti-arthritic activity. However, the stereochemical configuration of the oxime carbon-nitrogen double bond (E- or Z-) in these compounds was so far unknown. In this contribution, we report the results of the determination of the double bond configuration in the solid state by single crystal X-ray diffraction and in solution by 1D and 2D NMR techniques and DFT calculations. It was found that both in the solid state and in solution, IQ-1 adopts the E-configuration stabilized by intermolecular hydrogen bonds, in contrast to previously assumed Z-configuration that could be stabilized only by an intramolecular hydrogen bond.

Highly Luminescent Lanthanide Metal-Organic Frameworks with Tunable Color for Nanomolar Detection of Iron(III), Ofloxacin and Gossypol and Anti-counterfeiting Applications.

Solvothermal reaction of 5,5'-(pyridine-2,6-diylbis(oxy))diisophthalic acid (H4 L) with europium(III) or terbium(III) nitrates in acetonitrile-water (1 : 1) at 120 °C gave rise to isostructural 2D coordination polymers, [Ln(HL)(H2 O)3 ]∞ (NIIC-1-Eu and NIIC-1-Tb), the layers of which are composed by eight-coordinated lanthanide(III) ions interconnected by triply deprotonated ligands HL3- . The layers are packed in the crystal without any specific intermolecular interactions between them, allowing the facile preparation of stable water suspensions, in which NIIC-1-Tb exhibited top-performing sensing properties through luminescence quenching effect with exceptionally low detection limits towards Fe3+ (LOD 8.62 nM), ofloxacin (OFX) antibiotic (LOD 3.91 nM) and cotton phytotoxicant gossypol (LOD 2.27 nM). In addition to low detection limit and high selectivity, NIIC-1-Tb features fast sensing response (within 60-90 seconds), making it superior to other MOF-based sensors for metal cations and organic toxicants. The photoluminescence quantum yield of NIIC-1-Tb was 93 %, one of the highest among lanthanide MOFs. Mixed-metal coordination polymers NIIC-1-Eux Tb1-x demonstrated efficient photoluminescence, the color of which could be modulated by the excitation wavelength and time delay for emission monitoring (within 1 millisecond). Furthermore, an original 2D QR-coding scheme was designed for anti-counterfeiting labeling of goods based on unique and tunable emission spectra of NIIC-1-Ln coordination polymers.

4 in 1: multifunctional europium-organic frameworks with luminescence sensing properties, white light emission, proton conductivity and reverse acetylene-carbon dioxide adsorption selectivity.

Lanthanide metal-organic frameworks (Ln-MOFs) combine the lanthanide luminescence characteristics and the advantages of porous materials, which can be used in various research fields by exploring their multifunctional properties. A three-dimensional water-stable and high-temperature resistant Eu-MOF [Eu(H2O)(HL)]·0.5MeCN·0.25H2O (H4L = 4-(3,5-dicarboxyphenoxy)isophthalic acid), demonstrating a high photoluminescence quantum yield, was synthesized and structurally characterized. In terms of luminescence, the Eu-MOF exhibits excellent selectivity and quenching sensing for Fe3+ (LOD = 4.32 µM) and ofloxacin, as well as color modulation with Tb3+ and La3+ to develop white LED components with high illumination efficiency (color rendering index, CRI = 90). On the other hand, narrow one-dimensional channels of the Eu-MOF decorated with COOH groups enable a rare reverse adsorption selectivity in a CO2/C2H2 gas mixture. In addition, the protonated carboxyl groups in the Eu-MOF provide an efficient conducting platform for proton transfer with a conductivity value of 8 × 10-4 S cm-1 at 50 °C and RH 100%.

Ultra-low limit of luminescent detection of gossypol by terbium(III)-based metal-organic framework.

The widespread use of gossypol-containing animal feed and cottonseed oil poses a great threat to water quality and livestock and human health, and there is an urgent need for a sensor for the rapid detection of trace amounts of gossypol in aqueous solutions and cottonseed oil. As a result, an unprecedented three-dimensional metal-organic framework sensor based on terbium(III) and a flexible ligand 4-(3,5-dicarboxyphenoxy)isophthalic acid (H4L) was developed. Tb-MOF, {[Tb(H2O)(HL)]·0.5MeCN·0.25 H2O}n, is highly stable in water and polar organic solvents and exhibits terbium-centered luminescence with 44% quantum yield. Suspensions of MOF in water and ethanol demonstrate a luminescence quenching response to cotton phytotoxicant gossypol with an unprecedented low detection limit of 0.76 nM and 1.89 nM, correspondingly, without interference from the components of cottonseed oil and blood plasma, making it suitable for the detection and determination of gossypol in real-life water and oil samples. Significantly, Tb-MOF is the first highly efficient sensor that uses water as a solvent to detect trace amounts of gossypol, and it can visualize and quantify gossypol in edible-grade cottonseed oil as well, which proves its great potential for practical application. In addition, Tb-MOF exhibited a detection limit for Fe3+ (0.23 µM) among the lowest reported for lanthanide-based MOFs in aqueous solutions so far.

Variable Dimensionality of Europium(III) and Terbium(III) Coordination Compounds with a Flexible Hexacarboxylate Ligand.

A reaction between 4,4',4″-(benzene-1,3,5-triyltris(oxy))triphthalic acid (H6L) and lanthanide(III) nitrates (Ln = Eu3+, Tb3+) in water under the same conditions gave a molecular coordination compound [Tb(H4.5L)2(H2O)5]∙6H2O in the case of terbium(III) and a one-dimensional linear coordination polymer {[Eu2(H3L)2(H2O)6]∙8H2O}n in the case of europium(III). The crystal structures of both compounds were established by single-crystal X-ray diffraction, and they were further characterized by powder X-ray diffraction, thermogravimetric analysis and infrared spectroscopy. The compounds demonstrated characteristic lanthanide-centered photoluminescence. The lanthanide-dependent dimensionality of the synthesized compounds, which are the first examples of the coordination compounds of hexacarboxylic acid H6L demonstrates its potential as a linker for new coordination polymers.

Structural Diversity and Carbon Dioxide Sorption Selectivity of Zinc(II) Metal-Organic Frameworks Based on Bis(1,2,4-triazol-1-yl)methane and Terephthalic Acid.

A three-component reaction between the 1,4-benzenedicarboxylic (terephthalic) acid (H2bdc), bis(1,2,4-triazol-1-yl)methane (btrm) and zinc nitrate was studied, and three new coordination polymers were isolated by a careful selection of the reaction conditions. Coordination polymers {[Zn3(DMF)(btrm)(bdc)3]·nDMF}∞ and {[Zn3(btrm)(bdc)3]·nDMF}∞ containing trinuclear {Zn3(bdc)3} secondary building units are joined by btrm auxiliary linkers into three-dimensional metal-organic frameworks. The coordination polymer {[Zn(bdc)(btrm)]∙nDMF}∞ consists of Zn2+ cations joined by bdc2- and btrm linkers into a two-fold interpenetrated network. Upon activation, MOF [Zn3(btrm)(bdc)3]∞ demonstrated CO2/N2 adsorption selectivity with an ideal adsorbed solution theory (IAST) factor of 21. All three MOF demonstrated photoluminescence with a maximum near 435-440 nm upon excitation at 330 nm.

A Zn(II)-Based Sql Type 2D Coordination Polymer as a Highly Sensitive and Selective Turn-On Fluorescent Probe for Al3.

A luminescent coordination polymer with the overall formula {[Zn(tr2btd)(bpdc)]∙DMF}n (where tr2btd = 4,7-di(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole; bpdc = 4,4'-biphenyldicarboxylate) was synthesized and characterized by single-crystal and powder X-ray diffraction, thermogravimetric, infrared spectroscopy, and elemental analyses. Luminescent properties of the obtained compound were studied in detail both in the solid state and as a suspension in N,N-dimethylacetamide (DMA). It was found that {[Zn(tr2btd)(bpdc)]∙DMF}n exhibits bright turquoise luminescence with excellent quantum efficiency and demonstrates turn-on fluorescence enhancement effect upon soaking in DMA Al3+ solution. Fluorescence titration experiments were carried out and the detection limit for Al3+ ions was calculated to be 120 nM, which is among the lowest reported values for similar materials. Moreover, compound demonstrated excellent selectivity and reusability, and the mechanism of the response is discussed. These results indicate that {[Zn(tr2btd)(bpdc)]∙DMF}n is a promising probe for sensitive fluorescent Al3+ detection.

Synthesis, Crystal Structure, and Luminescence of Cadmium(II) and Silver(I) Coordination Polymers Based on 1,3-Bis(1,2,4-triazol-1-yl)adamantane.

Coordination polymers with a new rigid ligand 1,3-bis(1,2,4-triazol-1-yl)adamantane (L) were prepared by its reaction with cadmium(II) or silver(I) nitrates. Crystal structure of the coordination polymers was determined using single-crystal X-ray diffraction analysis. Silver formed two-dimensional coordination polymer [Ag(L)NO3]n, in which metal ions are linked by 1,3-bis(1,2,4-triazol-1-yl)adamantane ligands, coordinated by nitrogen atoms at positions 2 and 4 of 1,2,4-triazole rings. Layers of the coordination polymer consist of rare 18- and 30-membered {Ag2L2} and {Ag4L4} metallocycles. Cadmium(II) nitrate formed two kinds of one-dimensional coordination polymers depending on the metal-to-ligand ratio used in the synthesis. Coordination polymer [Cd(L)2(NO3)2]n was obtained in case of a 1:2 M:L ratio, while for M:L = 2:1 product {[Cd(L)(NO3)2(CH3OH)]·0.5CH3OH}n was isolated. All coordination polymers demonstrated ligand-centered emission near 450 nm upon excitation at 370 nm.

Approaches to the Synthesis of Dicarboxylic Derivatives of Bis(pyrazol-1-yl)alkanes.

Carboxylation of bis(pyrazol-1-yl)alkanes by oxalyl chloride was studied. It was found that 4,4'-dicarboxylic derivatives of substrates with electron-donating methyl groups and short linkers (from one to three methylene groups) can be prepared using this method. Longer linkers lead to significantly lower product yields, which is probably due to instability of the intermediate acid chlorides that are initially formed in the reaction with oxalyl chloride. Thus, bis(pyrazol-1-yl)methane gave only monocarboxylic derivative even with a large excess of oxalyl chloride and prolonged reaction duration. An alternative approach involves the reaction of ethyl 4-pyrazolecarboxylates with dibromoalkanes in a superbasic medium (potassium hydroxide-dimethyl sulfoxide) and is suitable for the preparation of bis(4-carboxypyrazol-1-yl)alkanes with both short and long linkers independent of substitution in positions 3 and 5 of pyrazole rings. The obtained dicarboxylic acids are interesting as potential building blocks for metal-organic frameworks.

Coordination Polymers Based on Highly Emissive Ligands: Synthesis and Functional Properties.

Coordination polymers are constructed from metal ions and bridging ligands, linking them into solid-state structures extending in one (1D), two (2D) or three dimensions (3D). Two- and three-dimensional coordination polymers with potential voids are often referred to as metal-organic frameworks (MOFs) or porous coordination polymers. Luminescence is an important property of coordination polymers, often playing a key role in their applications. Photophysical properties of the coordination polymers can be associated with intraligand, metal-centered, guest-centered, metal-to-ligand and ligand-to-metal electron transitions. In recent years, a rapid growth of publications devoted to luminescent or fluorescent coordination polymers can be observed. In this review the use of fluorescent ligands, namely, 4,4'-stilbenedicarboxylic acid, 1,3,4-oxadiazole, thiazole, 2,1,3-benzothiadiazole, terpyridine and carbazole derivatives, naphthalene diimides, 4,4',4''-nitrilotribenzoic acid, ruthenium(II) and iridium(III) complexes, boron-dipyrromethene (BODIPY) derivatives, porphyrins, for the construction of coordination polymers are surveyed. Applications of such coordination polymers based on their photophysical properties will be discussed. The review covers the literature published before April 2020.

Arene-Ruthenium(II) Complexes Containing 11H-Indeno[1,2-b]quinoxalin-11-one Derivatives and Tryptanthrin-6-oxime: Synthesis, Characterization, Cytotoxicity, and Catalytic Transfer Hydrogenation of Aryl Ketones.

A series of novel mono- and binuclear arene-ruthenium(II) complexes [(p-cym)Ru(L)Cl] containing 11H-indeno[1,2-b]quinoxalin-11-one derivatives or tryptanthrin-6-oxime were synthesized and characterized by X-ray crystallography, IR, NMR spectroscopy, cyclic voltammetry, and elemental analysis. Theoretical calculations invoking singlet state geometry optimization, solvation effects, and noncovalent interactions were done using density functional theory (DFT). DFT calculations were also applied to evaluate the electronic properties, and time-dependent DFT was applied to clarify experimental UV-vis results. Cytotoxicity for cancerous and noncancerous human cell lines was evaluated with cell viability MTT assay. Complexes demonstrated a moderate cytotoxic effect toward cancerous human cell line PANC-1. The catalytic activity of the complexes was evaluated in transfer hydrogenation of aryl ketones. All complexes exhibited good catalytic activity and functional group tolerance.

Facile Synthesis of 3-(Azol-1-yl)-1-adamantanecarboxylic Acids-New Bifunctional Angle-Shaped Building Blocks for Coordination Polymers.

For the first time, orthogonally substituted azole-carboxylate adamantane ligands were synthesized and used for preparation of coordination polymers. The angle-shaped ligands were prepared by the reaction of 1-adamantanecarboxylic acid and azoles (1H-1,2,4-triazole, 3-methyl-1H-1,2,4-triazole, 3,5-dimethyl-1H-1,2,4-triazole, 1H-tetrazole, 5-methyl-1H-tetrazole) in concentrated sulfuric acid. Variation of the solvent and substituents in azole rings allowed to prepare both 1D and 2D copper(II) and nickel(II) coordination polymers, [Cu2(trzadc)4(H2O)0.7]∙DMF∙0.3H2O, [Cu(trzadc)2(MeOH)]∙MeOH, [Ni(trzadc)2(MeOH)2] and [Cu2(mtrzadc)3(MeOH)]+NO3- (trzadc-3-(1,2,4-triazol-1-yl)-adamantane-1-carboxylic acid; mtrzadc-3-(3-methyl-1,2,4-triazol-1-yl)-adamantane-1-carboxylic acid) which were structurally characterized by single crystal X-ray diffraction. Complex [Cu(trzadc)2(MeOH)]∙MeOH was shown to act as a catalyst in the Chan-Evans-Lam arylation reaction.

Synthesis, biological evaluation, and molecular modeling of 11H-indeno[1,2-b]quinoxalin-11-one derivatives and tryptanthrin-6-oxime as c-Jun N-terminal kinase inhibitors.

c-Jun N-terminal kinases (JNKs) play a central role in many physiologic and pathologic processes. We synthesized novel 11H-indeno[1,2-b]quinoxalin-11-one oxime analogs and tryptanthrin-6-oxime (indolo[2,1-b]quinazoline-6,12-dion-6-oxime) and evaluated their effects on JNK activity. Several compounds exhibited sub-micromolar JNK binding affinity and were selective for JNK1/JNK3 versus JNK2. The most potent compounds were 10c (11H-indeno[1,2-b]quinoxalin-11-one O-(O-ethylcarboxymethyl) oxime) and tryptanthrin-6-oxime, which had dissociation constants (Kd) for JNK1 and JNK3 of 22 and 76 nM and 150 and 275 nM, respectively. Molecular modeling suggested a mode of binding interaction at the JNK catalytic site and that the selected oxime derivatives were potentially competitive JNK inhibitors. JNK binding activity of the compounds correlated with their ability to inhibit lipopolysaccharide (LPS)-induced nuclear factor-κB/activating protein 1 (NF-κB/AP-1) activation in human monocytic THP-1Blue cells and interleukin-6 (IL-6) production by human MonoMac-6 cells. Thus, oximes with indenoquinoxaline and tryptanthrin nuclei can serve as specific small-molecule modulators for mechanistic studies of JNK, as well as potential leads for the development of anti-inflammatory drugs.