Chitosan Micro-Membranes with Integrated Gold Nanoparticles as an LSPR-Based Sensing Platform.

Currently, there is an increasing need to develop highly sensitive plasmonic sensors able to provide good biocompatibility, flexibility, and optical stability to detect low levels of analytes in biological media. In this study, gold nanoparticles (Au NPs) were dispersed into chitosan membranes by spin coating. It has been demonstrated that these membranes are particularly stable and can be successfully employed as versatile plasmonic platforms for molecular sensing. The optical response of the chitosan/Au NPs interfaces and their capability to sense the medium's refractive index (RI) changes, either in a liquid or gas media, were investigated by high-resolution localized surface plasmon resonance (HR-LSPR) spectroscopy, as a proof of concept for biosensing applications. The results revealed that the lowest polymer concentration (chitosan (0.5%)/Au-NPs membrane) presented the most suitable plasmonic response. An LSPR band redshift was observed as the RI of the surrounding media was incremented, resulting in a sensitivity value of 28 ± 1 nm/RIU. Furthermore, the plasmonic membrane showed an outstanding performance when tested in gaseous atmospheres, being capable of distinguishing inert gases with only a 10-5 RI unit difference. The potential of chitosan/Au-NPs membranes was confirmed for application in LSPR-based sensing applications, despite the fact that further materials optimization should be performed to enhance sensitivity.

Optimization of Au:CuO Thin Films by Plasma Surface Modification for High-Resolution LSPR Gas Sensing at Room Temperature.

In this study, thin films composed of gold nanoparticles embedded in a copper oxide matrix (Au:CuO), manifesting Localized Surface Plasmon Resonance (LSPR) behavior, were produced by reactive DC magnetron sputtering and post-deposition in-air annealing. The effect of low-power Ar plasma etching on the surface properties of the plasmonic thin films was studied, envisaging its optimization as gas sensors. Thus, this work pretends to attain the maximum sensing response of the thin film system and to demonstrate its potential as a gas sensor. The results show that as Ar plasma treatment time increases, the host CuO matrix is etched while Au nanoparticles are uncovered, which leads to an enhancement of the sensitivity until a certain limit. Above such a time limit for plasma treatment, the CuO bonds are broken, and oxygen is removed from the film's surface, resulting in a decrease in the gas sensing capabilities. Hence, the importance of the host matrix for the design of the LSPR sensor is also demonstrated. CuO not only provides stability and protection to the Au NPs but also promotes interactions between the thin film's surface and the tested gases, thereby improving the nanocomposite film's sensitivity. The optimized sensor sensitivity was estimated at 849 nm/RIU, which demonstrates that the Au-CuO thin films have the potential to be used as an LSPR platform for gas sensors.

Optimization of Au:CuO Nanocomposite Thin Films for Gas Sensing with High-Resolution Localized Surface Plasmon Resonance Spectroscopy.

Gas sensing based on bulk refractive index (RI) changes, has been a challenging task for localized surface plasmon resonance (LSPR) spectroscopy, presenting only a limited number of reports in this field. In this work, it is demonstrated that a plasmonic thin film composed of Au nanoparticles embedded in a CuO matrix can be used to detect small changes (as low as 6 × 10-5 RIU) in bulk RI of gases at room temperature, using a high-resolution LSPR spectroscopy system. To optimize the film's surface, a simple Ar plasma treatment revealed to be enough to remove the top layers of the film and to partially expose the embedded nanoparticles, and thus enhance the film's gas sensing capabilities. The treated sample exhibits high sensitivity to inert gases (Ar, N2), presenting a refractive index sensitivity (RIS) to bulk RI changes of 425 nm/RIU. Furthermore, a 2-fold signal increase is observed for O2, showing that the film is clearly more sensitive to this gas due to its oxidizing nature. The results showed that the Au:CuO thin film system is a RI sensitive platform able to detect inert gases, which can be more sensitive to detect noninert gases as O2 or even other reactive species.

Nanoplasmonic response of porous Au-TiO2 thin films prepared by oblique angle deposition.

In this work, a versatile method is proposed to increase the sensitivity of optical sensors based on the localized surface plasmon resonance (LSPR) phenomenon. It combines a physical deposition method with the oblique angle deposition technique, allowing the preparation of plasmonic thin films with tailored porosity. Thin films of Au-TiO2 were deposited by reactive magnetron sputtering in a 3D nanostructure (zigzag growth), at different incidence angles (0° ≤ α ≤ 80°), followed by in-air thermal annealing at 400 °C to induce the growth of the Au nanoparticles. The roughness and surface porosity suffered a gradual increment by increasing the incidence angle. The resulting porous zigzag nanostructures that were obtained also decreased the principal refractive indexes (RIs) of the matrix and favoured the diffusion of Au through grain boundaries, originating broader nanoparticle size distributions. The transmittance minimum of the LSPR band appeared at around 600 nm, leading to a red-shift to about 626 nm for the highest incidence angle α = 80°, due to the presence of larger (scattering) nanoparticles. It is demonstrated that zigzag nanostructures can enhance adsorption sites for LSPR sensing by tailoring the porosity of the thin films. Atmosphere controlled transmittance-LSPR measurements showed that the RI sensitivity of the films is improved for higher incidence angles.