The interplay of hematite and photic biofilm triggers the acceleration of biotic nitrate removal.

The soil-water interface is replete with photic biofilm and iron minerals; however, the potential of how iron minerals promote biotic nitrate removal is still unknown. This study investigates the physiological and ecological responses of photic biofilm to hematite (Fe2O3), in order to explore a practically feasible approach for in-situ nitrate removal. The nitrate removal by photic biofilm was significantly higher in the presence of Fe2O3 (92.5%) compared to the control (82.8%). Results show that the presence of Fe2O3 changed the microbial community composition of the photic biofilm, facilitates the thriving of Magnetospirillum and Pseudomonas, and promotes the growth of photic biofilm represented by the extracellular polymeric substance (EPS) and the content of chlorophyll. The presence of Fe2O3 also induces oxidative stress (•O2-) in the photic biofilm, which was demonstrated by electron spin resonance spectrometry. However, the photic biofilm could improve the EPS productivity to prevent the entrance of Fe2O3 to cells in the biofilm matrix and mitigate oxidative stress. The Fe2O3 then promoted the relative abundance of Magnetospirillum and Pseudomonas and the activity of nitrate reductase, which accelerates nitrate reduction by the photic biofilm. This study provides an insight into the interaction between iron minerals and photic biofilm and demonstrates the possibility of combining biotic and abiotic methods to improve the in-situ nitrate removal rate.

Large area single crystal gold of single nanometer thickness for nanophotonics.

Two-dimensional single crystal metals, in which the behavior of highly confined optical modes is intertwined with quantum phenomena, are highly sought after for next-generation technologies. Here, we report large area (>104 µm2), single crystal two-dimensional gold flakes (2DGFs) with thicknesses down to a single nanometer level, employing an atomic-level precision chemical etching approach. The decrease of the thickness down to such scales leads to the quantization of the electronic states, endowing 2DGFs with quantum-confinement-augmented optical nonlinearity, particularly leading to more than two orders of magnitude enhancement in harmonic generation compared with their thick polycrystalline counterparts. The nanometer-scale thickness and single crystal quality makes 2DGFs a promising platform for realizing plasmonic nanostructures with nanoscale optical confinement. This is demonstrated by patterning 2DGFs into nanoribbon arrays, exhibiting strongly confined near infrared plasmonic resonances with high quality factors. The developed 2DGFs provide an emerging platform for nanophotonic research and open up opportunities for applications in ultrathin plasmonic, optoelectronic and quantum devices.

Large second-order susceptibility from a quantized indium tin oxide monolayer.

Due to their high optical transparency and electrical conductivity, indium tin oxide thin films are a promising material for photonic circuit design and applications. However, their weak optical nonlinearity has been a substantial barrier to nonlinear signal processing applications. In this study, we show that an atomically thin (~1.5 nm) indium tin oxide film in the form of an air/indium tin oxide/SiO2 quantum well exhibits a second-order susceptibility χ2 of ~1,800 pm V-1. First-principles calculations and quantum electrostatic modelling point to an electronic interband transition resonance in the asymmetric potential energy of the quantum well as the reason for this large χ2 value. As the χ2 value is more than 20 times higher than that of the traditional nonlinear LiNbO3 crystal, our indium tin oxide quantum well design can be an important step towards nonlinear photonic circuit applications.

Dynamic recognition and mirage using neuro-metamaterials.

Breakthroughs in the field of object recognition facilitate ubiquitous applications in the modern world, ranging from security and surveillance equipment to accessibility devices for the visually impaired. Recently-emerged optical computing provides a fundamentally new computing modality to accelerate its solution with photons; however, it still necessitates digital processing for in situ application, inextricably tied to Moore's law. Here, from an entirely optical perspective, we introduce the concept of neuro-metamaterials that can be applied to realize a dynamic object- recognition system. The neuro-metamaterials are fabricated from inhomogeneous metamaterials or transmission metasurfaces, and optimized using, such as topology optimization and deep learning. We demonstrate the concept in experiments where living rabbits play freely in front of the neuro-metamaterials, which enable to perceive in light speed the rabbits' representative postures. Furthermore, we show how this capability enables a new physical mechanism for creating dynamic optical mirages, through which a sequence of rabbit movements is converted into a holographic video of a different animal. Our work provides deep insight into how metamaterials could facilitate a myriad of in situ applications, such as illusive cloaking and speed-of-light information display, processing, and encryption, possibly ushering in an "Optical Internet of Things" era.

Two-dimensional optical spatial differentiation and high-contrast imaging.

Optical analog signal processing technology has been widely studied and applied in a variety of science and engineering fields, with the advantages of overcoming the low-speed and high-power consumption associated with its digital counterparts. Much attention has been given to emerging metasurface technology in the field of optical imaging and processing systems. Here, we demonstrate, for the first time, broadband two-dimensional spatial differentiation and high-contrast edge imaging based on a dielectric metasurface across the whole visible spectrum. This edge detection method works for both intensity and phase objects simply by inserting the metasurface into a commercial optical microscope. This highly efficient metasurface performing a basic optical differentiation operation opens up new opportunities in applications of fast, compactible and power-efficient ultrathin devices for data processing and biological imaging.

Highly-efficient electrically-driven localized surface plasmon source enabled by resonant inelastic electron tunneling.

On-chip plasmonic circuitry offers a promising route to meet the ever-increasing requirement for device density and data bandwidth in information processing. As the key building block, electrically-driven nanoscale plasmonic sources such as nanoLEDs, nanolasers, and nanojunctions have attracted intense interest in recent years. Among them, surface plasmon (SP) sources based on inelastic electron tunneling (IET) have been demonstrated as an appealing candidate owing to the ultrafast quantum-mechanical tunneling response and great tunability. However, the major barrier to the demonstrated IET-based SP sources is their low SP excitation efficiency due to the fact that elastic tunneling of electrons is much more efficient than inelastic tunneling. Here, we remove this barrier by introducing resonant inelastic electron tunneling (RIET)-follow a recent theoretical proposal-at the visible/near-infrared (NIR) frequencies and demonstrate highly-efficient electrically-driven SP sources. In our system, RIET is supported by a TiN/Al2O3 metallic quantum well (MQW) heterostructure, while monocrystalline silver nanorods (AgNRs) were used for the SP generation (localized surface plasmons (LSPs)). In principle, this RIET approach can push the external quantum efficiency (EQE) close to unity, opening up a new era of SP sources for not only high-performance plasmonic circuitry, but also advanced optical sensing applications.

Kerr Metasurface Enabled by Metallic Quantum Wells.

Optical metasurfaces have emerged as promising candidates for multifunctional devices. Dynamically reconfigurable metasurfaces have been introduced by employing phase-change materials or by applying voltage, heat, or strain. While existing metasurfaces exhibit appealing properties, they do not express any significant nonlinear effects due to the negligible nonlinear responses from the typical materials used to build the metasurface. In this work, we propose and experimentally demonstrate one kind of Kerr metasurface that shows strong intensity-dependent responses. The Kerr metasurface is composed of a top layer of gold antennas, a dielectric spacer, and a ground layer of metallic quantum wells (MQWs). Because of the large Kerr nonlinearity supported by the MQWs, the effective optical properties of the MQWs can change from metallic to dielectric with increasing of the input intensity, leading to dramatic modifications of the metasurface responses. This opens up new routes for potential applications in the field of nonlinear optics.

Metasurface enabled quantum edge detection.

Metasurfaces consisting of engineered dielectric or metallic structures provide unique solutions to realize exotic phenomena including negative refraction, achromatic focusing, electromagnetic cloaking, and so on. The intersection of metasurface and quantum optics may lead to new opportunities but is much less explored. Here, we propose and experimentally demonstrate that a polarization-entangled photon source can be used to switch ON or OFF the optical edge detection mode in an imaging system based on a high-efficiency dielectric metasurface. This experiment enriches both fields of metasurface and quantum optics, representing a promising direction toward quantum edge detection and image processing with remarkable signal-to-noise ratio.

Nanoscale optical pulse limiter enabled by refractory metallic quantum wells.

The past several decades have witnessed rapid development of high-intensity, ultrashort pulse lasers, enabling deeper laboratory investigation of nonlinear optics, plasma physics, and quantum science and technology than previously possible. Naturally, with their increasing use, the risk of accidental damage to optical detection systems rises commensurately. Thus, various optical limiting mechanisms and devices have been proposed. However, restricted by the weak optical nonlinearity of natural materials, state-of-the-art optical limiters rely on bulk liquid or solid media, operating in the transmission mode. Device miniaturization becomes complicated with these designs while maintaining superior integrability and controllability. Here, we demonstrate a reflection-mode pulse limiter (sub-100 nm) using nanoscale refractory films made of Al2O3/TiN/Al2O3 metallic quantum wells (MQWs), which provide large and ultrafast Kerr-type optical nonlinearities due to the quantum size effect of the MQW. Functional multilayers consisting of these MQWs could find important applications in nanophotonics, nonlinear optics, and meta-optics.

A spin controlled wavefront shaping metasurface with low dispersion in visible frequencies.

Similar to amplitude and phase, optical spin plays an important and non-trivial role in optics, which has been widely demonstrated in wavefront engineering, creation of new optical components, and sensitive optical metrology. In this work, we propose and experimentally demonstrate a new type of spin controlled wavefront shaping metasurface. The proposed geometric phase metasurface is designed by employing the integrated and interleaved structures to independently control the left-handed and right-handed spin components. As an exemplary demonstration, our experimental results show that such a composite metasurface can convert a plane wave into a vortex beam and a Hermite beam for left-handed and right-handed polarized light, respectively. Because such a metasurface is made from non-resonant dielectric structures, it can work for broadband frequencies with very low dispersion. The proposed metasurface is fabricated by the laser writing method inside transparent glass with a low cost, which avoids the typical high-resolution lithography process. This spin dependent broadband wavefront shaping metasurface may find potential applications in optical communications, information processing, and optical metrology.

Optical edge detection based on high-efficiency dielectric metasurface.

Optical edge detection is a useful method for characterizing boundaries, which is also in the forefront of image processing for object detection. As the field of metamaterials and metasurface is growing fast in an effort to miniaturize optical devices at unprecedented scales, experimental realization of optical edge detection with metamaterials remains a challenge and lags behind theoretical proposals. Here, we propose a mechanism of edge detection based on a Pancharatnam-Berry-phase metasurface. We experimentally demonstrated broadband edge detection using designed dielectric metasurfaces with high optical efficiency. The metasurfaces were fabricated by scanning a focused laser beam inside glass substrate and can be easily integrated with traditional optical components. The proposed edge-detection mechanism may find important applications in image processing, high-contrast microscopy, and real-time object detection on compact optical platforms such as mobile phones and smart cameras.

Large optical nonlinearity enabled by coupled metallic quantum wells.

New materials that exhibit strong second-order optical nonlinearities at a desired operational frequency are of paramount importance for nonlinear optics. Giant second-order susceptibility χ (2) has been obtained in semiconductor quantum wells (QWs). Unfortunately, the limited confining potential in semiconductor QWs causes formidable challenges in scaling such a scheme to the visible/near-infrared (NIR) frequencies for more vital nonlinear-optic applications. Here, we introduce a metal/dielectric heterostructured platform, i.e., TiN/Al2O3 epitaxial multilayers, to overcome that limitation. This platform has an extremely high χ (2) of approximately 1500 pm/V at NIR frequencies. By combining the aforementioned heterostructure with the large electric field enhancement afforded by a nanostructured metasurface, the power efficiency of second harmonic generation (SHG) achieved 10-4 at an incident pulse intensity of 10 GW/cm2, which is an improvement of several orders of magnitude compared to that of previous demonstrations from nonlinear surfaces at similar frequencies. The proposed quantum-engineered heterostructures enable efficient wave mixing at visible/NIR frequencies into ultracompact nonlinear optical devices.

Assessment of aging characteristics of female condylar trabecular structure by cone-beam computed tomography.

OBJECTIVES: This study was performed to analyze the aging-related changes of the female condylar bone mineral density (BMD) and trabecular structure by cone-beam computed tomography (CBCT), and determine whether the condylar structure shows obvious changes after menopause. METHODS: The CBCT images of 160 female patients who met the inclusion criteria for the study were collected and divided into four groups by age (20-29 years, 30-39 years, premenopausal, and postmenopausal groups). Computer processing software CT-Analyser (Version 1.15.2.2+; SkyScan, Antwerp, Belgium) was used to measure the condylar BMD and related indexes, namely the bone volume/tissue volume ratio (BV/TV), trabecular number (Tb.N), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), trabecular structure model index (SMI), and bone surface area/volume ratio (BS/BV). SPSS 12.0 (SPSS Inc., Chicago, IL, USA) was used to analyze the radiographic findings and statistical differences. RESULTS: No significant differences were found between the bilateral condyles in each group (P > 0.05). BV/TV, Tb.N, and Tb.Th of the condyle decreased with age, and the postmenopausal group showed significantly different values for each index compared with the other groups (P < 0.01). Tb.Sp, SMI, and BS/BV of the condyle increased with age, and the postmenopausal group showed significantly different values for each index compared with the other groups (P < 0.01). CONCLUSIONS: With increasing age, the female condylar bone volume decreases, the Tb.N and Tb.Th decrease, the gap between the trabecular bone increases, and plate-like trabecular bone gradually transforms into a rod-like form. These changes are much more obvious in postmenopausal women.

Experimental Demonstration of Hyperbolic Metamaterial Assisted Illumination Nanoscopy.

An optical metamaterial is capable of manipulating light in nanometer scale that goes beyond what is possible with conventional materials. Taking advantage of this special property, metamaterial-assisted illumination nanoscopy (MAIN) possesses tremendous potential to extend the resolution far beyond conventional structured illumination microscopy. Among the available MAIN designs, hyperstructured illumination that utilizes strong dispersion of a hyperbolic metamaterial (HMM) is one of the most promising and practical approaches, but it is only theoretically studied. In this paper, we experimentally demonstrate the concept of hyperstructured illumination. A ∼80 nm resolution has been achieved in a well-known Ag/SiO2 multilayer HMM system by using a low numerical aperture objective (NA = 0.5), representing a 6-fold resolution enhancement of the diffraction limit. The resolution can be significantly improved by further material optimization.

Controlled Homoepitaxial Growth of Hybrid Perovskites.

Organic-inorganic hybrid perovskites have demonstrated tremendous potential for the next-generation electronic and optoelectronic devices due to their remarkable carrier dynamics. Current studies are focusing on polycrystals, since controlled growth of device compatible single crystals is extremely challenging. Here, the first chemical epitaxial growth of single crystal CH3 NH3 PbBr3 with controlled locations, morphologies, and orientations, using combined strategies of advanced microfabrication, homoepitaxy, and low temperature solution method is reported. The growth is found to follow a layer-by-layer model. A light emitting diode array, with each CH3 NH3 PbBr3 crystal as a single pixel, with enhanced quantum efficiencies than its polycrystalline counterparts is demonstrated.

Nanostructuring Multilayer Hyperbolic Metamaterials for Ultrafast and Bright Green InGaN Quantum Wells.

Semiconductor quantum well (QW) light-emitting diodes (LEDs) have limited temporal modulation bandwidth of a few hundred MHz due to the long carrier recombination lifetime. Material doping and structure engineering typically leads to incremental change in the carrier recombination rate, whereas the plasmonic-based Purcell effect enables dramatic improvement for modulation frequency beyond the GHz limit. By stacking Ag-Si multilayers, the resulting hyperbolic metamaterials (HMMs) have shown tunability in the plasmonic density of states for enhancing light emission at various wavelengths. Here, nanopatterned Ag-Si multilayer HMMs are utilized for enhancing spontaneous carrier recombination rates in InGaN/GaN QWs. An enhancement of close to 160-fold is achieved in the spontaneous recombination rate across a broadband of working wavelengths accompanied by over tenfold enhancement in the QW peak emission intensity, thanks to the outcoupling of dominating HMM modes. The integration of nanopatterned HMMs with InGaN QWs will lead to ultrafast and bright QW LEDs with a 3 dB modulation bandwidth beyond 100 GHz for applications in high-speed optoelectronic devices, optical wireless communications, and light-fidelity networks.

Broadband Photonic Spin Hall Meta-Lens.

Meta-lens represents a promising solution for optical communications and information processing owing to its miniaturization capability and desirable optical properties. Here, spin Hall meta-lens is demonstrated to manipulate photonic spin-dependent splitting induced by spin-orbital interaction in transverse and longitudinal directions simultaneously at visible wavelengths, with low dispersion and more than 90% diffraction efficiency. The broadband dielectric spin Hall meta-lens is achieved by integrating two geometric phase lenses with different functionalities into one single dynamic phase lens, which manifests the ultracompact, portable, and polarization-dependent features. The broadband spin Hall meta-lens may find important applications in imaging, sensing, and multifunctional spin photonics devices.

Giant Kerr response of ultrathin gold films from quantum size effect.

With the size of plasmonic devices entering into the nanoscale region, the impact of quantum physics needs to be considered. In the past, the quantum size effect on linear material properties has been studied extensively. However, the nonlinear aspects have not been explored much so far. On the other hand, much effort has been put into the field of integrated nonlinear optics and a medium with large nonlinearity is desirable. Here we study the optical nonlinear properties of a nanometre scale gold quantum well by using the z-scan method and nonlinear spectrum broadening technique. The quantum size effect results in a giant optical Kerr susceptibility, which is four orders of magnitude higher than the intrinsic value of bulk gold and several orders larger than traditional nonlinear media. Such high nonlinearity enables efficient nonlinear interaction within a microscopic footprint, making quantum metallic films a promising candidate for integrated nonlinear optical applications.

Three-dimensional fluorescent microscopy via simultaneous illumination and detection at multiple planes.

The conventional optical microscope is an inherently two-dimensional (2D) imaging tool. The objective lens, eyepiece and image sensor are all designed to capture light emitted from a 2D 'object plane'. Existing technologies, such as confocal or light sheet fluorescence microscopy have to utilize mechanical scanning, a time-multiplexing process, to capture a 3D image. In this paper, we present a 3D optical microscopy method based upon simultaneously illuminating and detecting multiple focal planes. This is implemented by adding two diffractive optical elements to modify the illumination and detection optics. We demonstrate that the image quality of this technique is comparable to conventional light sheet fluorescent microscopy with the advantage of the simultaneous imaging of multiple axial planes and reduced number of scans required to image the whole sample volume.

Design of hybrid structure for fast and deep surface plasmon polariton modulation.

The electric and optical performance of different surface plasmon polariton (SPP) electric modulation structures have been investigated by comparing the response speed and modulation figures of merit (FoM). To overcome the capacitance limitation and improve the response speed, we proposed a novel silver-graphene-dielectric-graphene-semiconductor vertical structure. Semiconductor nano-waveguide is introduced to help reduce ohmic loss in silver waveguide and reflect the leaked optical field back, enhancing the modulation depth. Through optimization, a device with estimated modulation FoM of more than 70% and hundreds of GHz response speed and 3 dB bandwidth is designed, which may bring great improvement to previous optical modulators.