Construction of a Wood Nanofiber-Bismuth Halide Photocatalyst and Catalytic Degradation Performance of Tetracycline from Aqueous Solutions.

Nanostructured bismuth oxide bromide (BiOBr) has attracted considerable attention as a visible light catalyst. However, its photocatalytic degradation efficiency is limited by its low specific surface area. In this study, a solvothermal approach was employed to synthesize BiOBr, which was subsequently loaded onto cellulose nanofibers (CNFs) to obtain a bismuth halide composite catalyst. The performance of this catalyst in the removal of refractory organic pollutants such as tetracycline (TC) from solutions under visible light excitation was examined. Our results indicate that BiOBr/CNF effectively removes TC from the solution under light conditions. At a catalyst dosage of 100 mg/L, the removal efficiency for TC (with an initial concentration of 100 mg/L) was 94.2%. This study elucidates the relationship between the microstructure of BiOBr/CNF composite catalysts and their improved photocatalytic activity, offering a new method for effectively removing pollutants from water.

Develop a novel and multifunctional soy protein adhesive constructed by rosin acid emulsion and TiO2 organic-inorganic hybrid structure.

Soy protein adhesives (SPI) exhibit broad prospects in substituting aldehyde-based resin due to the economic and environmental-friendly characteristics, but still face a challenge because of the dissatisfied bonding strength and terrible water resistance. Herein, prompted by organic-inorganic hierarchy, a multifunctional and novel soy protein adhesive (SPI-RAE-TiO2) consisting of rosin acid emulsion (RAE) and TiO2 nanoparticles (TiO2) were proposed. In comparison with original SPI, the dry and wet shear strengths of modified adhesive reached 2.01 and 1.21 MPa, respectively, which were increased by 130 % and 200 %. Furthermore, SPI-6RAE-0.5TiO2 was selected as the best proportion via the method of response surface methodology (RSM). What's more, SPI-6RAE-0.5TiO2 adhesive demonstrated prominent coating performance in both dry and wet surface conditions. Meanwhile, SPI-6RAE-0.5TiO2 adhesive possessed excellent mildew resistance and antibacterial ability with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), reflecting the antibacterial rates 97.71 % and 98.16 %, respectively. In addition, SPI-6RAE-0.5TiO2 adhesive also exhibited the outstanding green features such as the reduction of formaldehyde pollution and greenhouse effect through Life Cycle Assessment (LCA). Thus, this work provided a novel and functional approach to design multifunctional, superior-property and low-carbon footprint soy protein adhesive.

Carbonized wood fiber-supported S, N-codoped carbon layer-coated multinary metal sulfide nanoarchitecture for efficient oxygen evolution reaction at ampere-level current density.

Multinary metal sulfides (MMSs) are highly suitable candidates for the application of electrocatalysis as they offer numerous parameters for optimizing the electronic structure and catalytic sites. Herein, a stable nanoarchitecture consisting of MMSs ((NiCoCrMnFe)Sx) nanoparticles embedded in S, N-codoped carbon (SNC) layers derived from metal organic framework (MOF) and supported on carbonized wood fibers (CWF) was fabricated by directly carbonization. Benefiting from this carbon-coated configuration, along with the synergistic effects within multinary metal systems, (NiCoCrMnFe)Sx@SNC/CWF delivers an exceptionally low overpotential of 260 mV at a high current density of 1000 mA cm-2, a small Tafel slope of 48.5 mV dec-1, and robust electrocatalytic stability. Furthermore, the (NiCoCrMnFe)Sx@SNC/CWF used as the cathode of rechargeable Zn-air batteries demonstrates higher power density and remarkable durability, surpassing that of commercial RuO2. Thus, we showcase the feasibility and advantages of employing highly efficient and durable MMSs materials for low-cost and sustainable energy conversion.

[Molecular Diagnosis and Pedigree Analysis of Rare Mutations in Non-coding Region of HBA2 Gene].

OBJECTIVE: To perform molecular diagnosis and pedigree analysis for one case with α-thalassemia who does not conform to the genetic laws, and explore the effects of a newly discovered rare mutation (HBA2:c.*12G>A) on clinical phenotypes. METHODS: Blood samples of the proband and her family members were collected for blood routine analysis, and the hemoglobin components were analyzed by capillary electrophoresis. The common α- and ß-globin gene loci in Chinese population were detected by conventional techniques (Gap-PCR, RDB-PCR). The α-globin gene sequences (HBA1, HBA2) were analyzed by Sanger sequencing. RESULTS: By analyzing the test results of proband and her family members, the genotype of the proband was -α3.7/HBA2:c.*12G>A, her father was HBA2:c.*12G>A heterozygous mutation carrier. CONCLUSION: This study identifies a rare α-globin gene mutation (HBA2:c.*12G>A) that has not been reported before. It is found that heterozygous mutation carriers present with static α-thalassemia.

Metal-Organic Framework Featuring Cubic Caged Structures for One-Step Ethylene Purification from Ethylene/Ethane Mixtures.

Separation of C2H6/C2H4 mixtures is of significant importance in the chemical industry but remains a challenge due to the physicochemical similarities of C2H6 and C2H4. Herein, a metal-organic framework (MOF), [Zn4(µ4-O)(PCTF)3]n (Zn-PCTF) (PCTF2-= 5-trifluoromethyl-1H-pyrazole-4-carboxylic), is provided for the removal of C2H6 from C2H6/C2H4 mixtures. Zn-PCTF displays a three-dimensional framework featuring one-dimensional pore channels with periodic bottleneck segments. The well-balanced C2H6 adsorption capacity (79.0 cm3 g-1 at 298 K) and C2H6/C2H4 selectivity (1.8) for Zn-PCTF under ambient conditions boost Zn-PCTF with highly promising potentials for efficient purification of C2H4 from C2H6/C2H4 mixtures, which is verified by the dynamic column breakthrough experiments. The well-matched caged pores and suitable pore chemistry (particularly the presence of abundant Lewis base sites (N, O, and F) on the pore surfaces) for C2H6 account for the high-performance C2H6/C2H4 separation of Zn-PCTF unveiled by computational simulations.

New advances in protein engineering for industrial applications: Key takeaways.

Recent advancements in protein/enzyme engineering have enabled the production of a diverse array of high-value compounds in microbial systems with the potential for industrial applications. The goal of this review is to articulate some of the most recent protein engineering advances in bacteria, yeast, and other microbial systems to produce valuable substances. These high-value substances include α-farnesene, vitamin B12, fumaric acid, linalool, glucaric acid, carminic acid, mycosporine-like amino acids, patchoulol, orcinol glucoside, d-lactic acid, keratinase, α-glucanotransferases, ß-glucosidase, seleno-methylselenocysteine, fatty acids, high-efficiency ß-glucosidase enzymes, cellulase, ß-carotene, physcion, and glucoamylase. Additionally, recent advances in enzyme engineering for enhancing thermostability will be discussed. These findings have the potential to revolutionize various industries, including biotechnology, food, pharmaceuticals, and biofuels.

Current status and emerging frontiers in enzyme engineering: An industrial perspective.

Protein engineering mechanisms can be an efficient approach to enhance the biochemical properties of various biocatalysts. Immobilization of biocatalysts and the introduction of new-to-nature chemical reactivities are also possible through the same mechanism. Discovering new protocols that enhance the catalytic active protein that possesses novelty in terms of being stable, active, and, stereoselectivity with functions could be identified as essential areas in terms of concurrent bioorganic chemistry (synergistic relationship between organic chemistry and biochemistry in the context of enzyme engineering). However, with our current level of knowledge about protein folding and its correlation with protein conformation and activities, it is almost impossible to design proteins with specific biological and physical properties. Hence, contemporary protein engineering typically involves reprogramming existing enzymes by mutagenesis to generate new phenotypes with desired properties. These processes ensure that limitations of naturally occurring enzymes are not encountered. For example, researchers have engineered cellulases and hemicellulases to withstand harsh conditions encountered during biomass pretreatment, such as high temperatures and acidic environments. By enhancing the activity and robustness of these enzymes, biofuel production becomes more economically viable and environmentally sustainable. Recent trends in enzyme engineering have enabled the development of tailored biocatalysts for pharmaceutical applications. For instance, researchers have engineered enzymes such as cytochrome P450s and amine oxidases to catalyze challenging reactions involved in drug synthesis. In addition to conventional methods, there has been an increasing application of machine learning techniques to identify patterns in data. These patterns are then used to predict protein structures, enhance enzyme solubility, stability, and function, forecast substrate specificity, and assist in rational protein design. In this review, we discussed recent trends in enzyme engineering to optimize the biochemical properties of various biocatalysts. Using examples relevant to biotechnology in engineering enzymes, we try to expatiate the significance of enzyme engineering with how these methods could be applied to optimize the biochemical properties of a naturally occurring enzyme.

Historic dog Furs Unravel the Origin and Artificial Selection of Modern Nordic Lapphund and Elkhound dog Breeds.

The origins and extreme morphological evolution of the modern dog breeds are poorly studied because the founder populations are extinct. Here, we analyse eight 100 to 200 years old dog fur samples obtained from traditional North Swedish clothing, to explore the origin and artificial selection of the modern Nordic Lapphund and Elkhound dog breeds. Population genomic analysis confirmed the Lapphund and Elkhound breeds to originate from the local dog population, and showed a distinct decrease in genetic diversity in agreement with intense breeding. We identified eleven genes under positive selection during the breed development. In particular, the MSRB3 gene, associated with breed-related ear morphology, was selected in all Lapphund and Elkhound breeds, and functional assays showed that a SNP mutation in the 3'UTR region suppresses its expression through miRNA regulation. Our findings demonstrate analysis of near-modern dog artifacts as an effective tool for interpreting the origin and artificial selection of the modern dog breeds.

Hydroxymethylation hydroxylation of 1,3-diarylpropene through a catalytic diastereoselective Prins reaction: cyclization logic and access to brazilin core.

A catalytic diastereoselective Prins reaction for hydroxymethylation and hydroxylation of 1,3-diarylpropene was successfully utilized to prepare various 1,3-dioxanes 7 in 14-88% yields. Take advantage of the synthetic intermediate 7h, the key B/C rings in brazilin core could be constructed by the sequential of Friedel-Crafts/Ullmann-Ma rather than Ullmann-Ma/Friedel-Crafts reactions.

A facile and intelligent detection method for diclazuril based on a stable dual emissive Eu3+-dopped metal-organic framework.

Diclazuril (DIC) is a broad-spectrum anti-coccidiosis drug of the triazine class, widely used in poultry farming. The overuse of DIC may lead to its accumulation in animal bodies, which may enter the food chain and threaten human health. In this work, we fabricated a stable Eu3+-doped UiO-66 fluorescence sensor (EuUHIPA-30) for the sensitive detection of DIC. Among 20 veterinary drugs, the fluorescence of EuUHIPA-30 selectively responds to DIC, with a low detection limit (0.19 µM) and fast response (10 s). EuUHIPA-30 is recyclable and can detect DIC in chicken and eggs with good recoveries. Moreover, a smartphone-integrated paper-based sensor enables the instrument-free, rapid, visual, and intelligent detection of DIC in chickens and eggs. This work provides a promising candidate for practical fluorescent DIC sensing in animal-derived food to promote food safety.

Rational Design of Amorphous Carbon-Coated Laminar-Structured Wood for Integrating Repeatable Early Fire Detection and High-Temperature Affordable Flexible Pressure Sensing in One System.

High-temperature affordable flexible polymer-based pressure sensors integrated with repeatable early fire warning service are strongly desired for harsh environmental applications, yet their creation remains challenging. This work proposed an approach for preparing such advanced integrated sensors based on silver nanoparticles and an ammonium polyphosphate (APP)-modified laminar-structured bulk wood sponge (APP/Ag@WS). Such integrated sensors demonstrated excellent fire warning performance, including a short response time (minimum of 0.44 s), a long-lasting alarm time (>750 s), and reliable repeatability. Moreover, it achieved high-temperature affordable flexible pressure sensing that exhibited an almost unimpaired working range of 0-7.5 kPa and a higher sensitivity (in the low-pressure range, maximum to 226.03 kPa-1) after fire. The high stability was attributed to reliable structural elasticity, and the wood-derived amorphous carbon is capable of repeatable fire warnings. Finally, a Ag@APP/WS-based wireless fire alarm system that realized reliable house fire accident detection was demonstrated, showing great promise for smart firefighting application.

Advances in the mechanisms and applications of RNA silencing in crop protection.

RNA silencing (or RNA interference, RNAi) is a conserved mechanism for regulating gene expression in eukaryotes, which plays vital roles in plant development and response to biotic and abiotic stresses. The discovery of trans-kingdom RNAi and interspecies RNAi provides a theoretical basis for exploiting RNAi-based crop protection strategies. Here, we summarize the canonical RNAi mechanisms in plants and review representative studies associated with plant-pathogen interactions. Meanwhile, we also elaborate upon the principles of host-induced gene silencing, spray-induced gene silencing and microbe-induced gene silencing, and discuss their applications in crop protection, thereby providing help to establish novel RNAi-based crop protection strategies.

[Cases Analysis of Hemoglobin H Disease Caused by HBA2:c.2T>C and HBA2:c.2delT Mutations].

OBJECTIVE: To investigate two cases of rare pathogenic genes, initiation codon mutations in HBA2 gene, combined with Southeast Asian deletion and their family members to understand the relationship of HBA2:c.2T>C and HBA2:c.2delT mutations with clinical phenotype. METHODS: The peripheral blood of family members was obtained for blood cell analysis and capillary electrophoresis hemoglobin analysis. Gap-PCR and reverse dot blotting (RDB) were used to detect common types of mutations in ɑ-thalassaemia gene. Sanger sequencing was used to analyze HBA1 and HBA2 gene sequence. RESULTS: Two proband genotypes were identified as --SEA/αα with HBA2:c.2T>C and --SEA/αα with HBA2:c.2delT. HBA2:c.2T>C/WT and HBA2:c.2delT/WT was detected in family members. They all presented with microcytic hypochromic anemia. CONCLUSION: When HBA2:c.2T>C and HBA2:c.2delT are heterozygous that can lead to static α-thalassemia phenotype, and when combined with mild α-thalassemia, they can lead to the clinical manifestations of hemoglobin H disease. This study provides a basis for genetic counseling.

Acetyl-CoA synthetase 2 induces pyroptosis and inflammation of renal epithelial tubular cells in sepsis-induced acute kidney injury by upregulating the KLF5/NF-κB pathway.

BACKGROUND: Pyroptosis of the renal tubular epithelial cells (RTECs) and interstitial inflammation are central pathological characteristics of acute kidney injury (AKI). Pyroptosis acts as a pro-inflammatory form of programmed cell death and is mainly dependent on activation of the NLRP3 inflammasome. Previous studies revealed that acetyl-CoA synthetase 2 (ACSS2) promotes inflammation during metabolic stress suggesting that ACSS2 might regulate pyroptosis and inflammatory responses of RTECs in AKI. METHODS AND RESULTS: The expression of ACSS2 was found to be significantly increased in the renal epithelial cells of mice with lipopolysaccharide (LPS)-induced AKI. Pharmacological and genetic strategies demonstrated that ACSS2 regulated NLRP3-mediated caspase-1 activation and pyroptosis through the stimulation of the KLF5/NF-κB pathway in RTECs. The deletion of ACSS2 attenuated renal tubular pathological injury and inflammatory cell infiltration in an LPS-induced mouse model, and ACSS2-deficient mice displayed impaired NLRP3 activation-mediated pyroptosis and decreased IL-1ß production in response to the LPS challenge. In HK-2 cells, ACSS2 deficiency suppressed NLRP3-mediated caspase-1 activation and pyroptosis through the downregulation of the KLF5/NF-κB pathway. The KLF5 inhibitor ML264 suppressed NF-κB activity and NLRP3-mediated caspase-1 activation, thus protecting HK-2 cells from LPS-induced pyroptosis. CONCLUSION: Our results suggested that ACSS2 regulates activation of the NLRP3 inflammasome and pyroptosis by inducing the KLF5/NF-κB pathway in RTECs. These results identified ACSS2 as a potential therapeutic target in AKI.

Construction of Nanofibrillar Networked Wood Aerogels Derived from Typical Softwood and Hardwood: A Comparative Study on the In Situ Formation Mechanism of Nanofibrillar Networks.

The construction of networks within natural wood (NW) lumens to produce porous wood aerogels (WAs) with fascinating characteristics of being lightweight, flexible, and porous is significant for the high value-added utilization of wood. Nonetheless, how wood species affect the structure and properties of WAs has not been comprehensively investigated. Herein, typical softwood of fir and hardwoods of poplar and balsa are employed to fabricate WAs with abundant nanofibrillar networks using the method of lignin removal and nanofibril's in situ regeneration. Benefiting from the avoidance of xylem ray restriction and the exposure of the cellulose framework, hardwood has a stronger tendency to form nanofibrillar networks compared to softwood. Specifically, a larger and more evenly distributed network structure is displayed in the lumens of balsa WAs (WA-3) with a low density (59 kg m-3), a high porosity (96%), and high compressive properties (strain = 40%; maximum stress = 0.42 MPa; height retention = 100%) because of the unique structure and properties of WA-3. Comparatively, the specific surface area (SSA) exhibits 25-, 27-, and 34-fold increments in the cases of fir WAs (WA-1), poplar WAs (WA-2), and WA-3. The formation of nanofibrillar networks depends on the low-density and thin cell walls of hardwood. This work offers a foundation for investigating the formation mechanisms of nanonetworks and for expanding the potential applications of WAs.

Metal-Organic Frameworks Possessing Suitable Pores for Xe/Kr Separation.

Adsorption separation of the Xe/Kr mixture remains a tough issue since Xe and Kr have an inert nature and similar sizes. Here we present a chlorinated metal-organic framework (MOF) [JXNU-19(Cl)] and its nonchlorinated analogue (JXNU-19) for Xe/Kr separation. The two isostructural MOFs constructed from the heptanuclear cobalt-hydroxyl clusters bridged by organic ligands are three-dimensional structures. Detailed contrast of the Xe/Kr adsorption separation properties of the MOF shows that significantly enhanced Xe uptakes and Xe/Kr adsorption selectivity (17.1) are observed for JXNU-19 as compared to JXNU-19(Cl). The main binding sites for Xe in the MOF revealed by computational simulations are far away from the chlorine sites, suggesting that the introduction of the chlorine groups results in the unfavorable Xe adsorption for JXNU-19(Cl). The optimal pores, high surface area, and multiple strong Xe-framework interactions facilitate the effective Xe/Kr separation for JXNU-19.

Encapsulated lignin-based slow-release manganese fertilizer with reduced cadmium accumulation in rice (Oryza sativa L.).

As an essential trace element for plant growth and development, manganese plays a crucial role in the uptake of the heavy metal cadmium by rice (Oryza sativa L.). In this study, we developed a novel slow-release manganese fertilizer named Mn@LNS-EL. Initially, lignin nanoparticles were derived from sodium lignosulfonate, and a one-step emulsification strategy was employed to prepare a water-in-oil-in-water (W/O/W) Pickering double emulsions. These double emulsions served as the template for interfacial polymerization of lignin nanoparticles and epichlorohydrin, resulting in the formation of microcapsule wall materials. Subsequently, manganese fertilizer (MnSO4) was successfully encapsulated within the microcapsules. Hydroponic experiments were conducted to investigate the effects of Mn@LNS-EL on rice growth and the cadmium and manganese contents in the roots and shoots of rice under cadmium stress conditions. The results revealed that the treatment with Mn@LNS-EL markedly alleviated the inhibitory effects of cadmium on rice growth, leading to notably lower cadmium levels in the rice roots and shoots compared to the specimens treated without manganese fertilizer. Specifically, there was a reduction of 37.9 % in the root cadmium content and a 17.1 % decrease in the shoot cadmium content. In conclusion, this study presents an innovative approach for the high-value utilization of lignin through effective encapsulation and slow-release mechanisms of trace-element fertilizers while offering a promising strategy for efficiently remediating cadmium pollution in rice.

Surface molecularly imprinted polymers based on magnetic multi-walled carbon nanotubes for the highly selective purification of resveratrol from crude extracts of Vitis vinifera, Arachis hypogaea, and Polygonum cuspidatum.

In this work, surface molecularly imprinted polymers based on magnetic multi-walled carbon nanotubes were prepared for the specific recognition and adsorption of resveratrol. The functionalization of magnetic multi-walled carbon nanotubes and the synthesis process of surface molecularly imprinted polymers were optimized. Characterizations were performed to demonstrate the successful synthesis of the imprinted materials. The imprinted materials showed satisfactory adsorption capacity of resveratrol (45.73 ± 1.72 mg/g) and excellent selectivity (imprinting factor 2.89 ± 0.15). In addition, the imprinted materials were used as adsorbents in molecularly imprinted solid-phase extraction for the purification of resveratrol from crude extracts of some food and medicinal resources, achieving recoveries of 93.69%-95.53% with high purities of 88.37%-92.33%. Moreover, the purified products exhibited extremely strong free radical scavenging activity compared with crude extracts. Overall, this work provided a promising approach for the highly selective purification of resveratrol from natural resources, which would contribute to the application of this valuable compound in the food/nutraceutical fields.

Abhd2, a Candidate Gene Regulating Airway Remodeling in COPD via TGF-ß.

Purpose: The typical characteristic of COPD is airway remodeling, affected by environmental and genetic factors. However, genetic studies on COPD have been limited. Currently, the Abhd2 gene is found to play a critical role in maintaining alveolar architecture and stability. The research aims to investigate the predictive value of Abhd2 for airway remodeling in COPD and its effect on TGF-ß regulation. Methods: In humans, Abhd2 protein was obtained from peripheral blood monocytes. Peripheral blood TGF-ß, pulmonary surfactant proteins (SPs), metalloproteinases, inflammatory indicators (WBC, NEU, NLR, EOS, CRP, PCT, D-Dimer), chest CT (airway diameter and airway wall thickness), pulmonary function, and blood gas analysis were used to assess airway remodeling. In animals, Abhd2 deficient mice (Abhd2Gt/Gt) using gene trapping and C57BL6 mice were injected intraperitoneally with CSE to construct COPD models. HE staining, Masson staining and immunohistochemistry were used to observe the pathological changes of airway in mice, and RT-PCR, WB, ELISA and immunofluorescence were used to detect the expression of secreted proteins and EMT markers. Results: COPD patients with worse pulmonary function and higher airway remodeling-related inflammatory factors had lower Abhd2 protein expression. Moreover, indicators followed the same trend for COPD patients grouped by prognosis (Group A vs Group B). Serum TGF-ß was negatively correlated with Abhd2 protein expression, FEV1/FVC, FEV1, and FEV1% PRED. In mice, Abhd2 depletion promoted deposition of TGF-ß, leading to more pronounced emphysema, airway thickening, increased alveolar macrophage infiltration, decreased AECII number and SPs, and EMT phenomenon. Conclusion: Downregulation of Abhd2 can promote airway remodeling in COPD by modulating repair after injury and EMT via TGF-ß. This study suggests that Abhd2 may serve as a biomarker for assessing airway remodeling and guiding prognosis in COPD.