Efficient Capture and Low Energy Release of NH3 by Azophenol Decorated Photoresponsive Covalent Organic Frameworks.

In NH3 capture technologies, the desorption process is usually driven by high temperature and low pressure (such as 150-200°C under vacuum), which accounts for intensive energy consumption and CO2 emission. Developing light responsive adsorbent is promising in this regard but remains a great challenge. Here, we for the first time designed and synthesized a light responsive azophenol-containing covalent organic framework (COF), COF-HNU38, to address this challenge. We found that at 25 °C and 1.0 bar the cis -COF exhibited a NH3 uptake capacity of 7.7 mmol g-1 and a NH3/N2 selectivity of 158. In the adsorbed NH3, about 29.0% could be removed by vis-light irradiated cis-trans isomerization at 25 °C, and the remaining NH3 might be released at 25 °C under vacuum. Almost no decrease in adsorption capacity was observed after eight adsorption-desorption cycles. As such, an efficient NH3 capture and low energy release strategy was established thanks to the multiple hydrogen bond interactions (which are strong in total but weak in individuals) between NH3 and the smart COF, and the increase in polarity and in number of hydrogen bond sites after the trans-cis isomerization process.

Zr-Based MOF-Stabilized CO2-Responsive Pickering Emulsions for Efficient Reduction of Nitroarenes.

A Pickering emulsion is a natural microreactor for interfacial catalysis in which an emulsifier is critical. Recently, a metal-organic framework (MOF) has attracted attention to emulsify water-organic mixtures for constructing a Pickering emulsion. However, a few stimuli-responsive Pickering emulsions based on MOFs have been reported, and the MOF emulsifiers cannot be regenerated at room temperature. Herein, the Zr-MOF with a rodlike morphology is synthesized using ionic liquid as a modulator and then modified with n-(trimethoxysilylpropyl)imidazole (C3im) to prepare a series of functionalized Zr-MOFs (MOF-C3im). It is found that MOF-C3im is an excellent emulsifier to construct stable and CO2-responsive Pickering emulsions even at low content (>0.20 wt %). Notably, the emulsification and demulsification of the emulsions can be easily and reversibly switched by bubbling of CO2 and N2 alternatively at room temperature because CO2 and imidazole molecules anchored on the Zr-MOF underwent a reversible acid-base reaction, resulting in an obvious change in the wettability of the emulsifier. As a proof of concept, the reduction reactions of nitrobenzene have been successfully carried out in these Pickering emulsions, demonstrating the efficient integration as a microreactor for chemical reaction, product separation, and emulsifier recycling under ambient conditions. This strategy provides an innovative option to develop stimulus-responsive Pickering emulsions for sustainable chemical processes.

Understanding the Positive Role of Ionic Liquids in CO2 Capture by Poly(ethylenimine).

CO2 capture technology is one of the most important technical methods for significantly mitigating CO2 emissions in a low-carbon context. The recent invention of mixed absorbents comprising poly(ethylenimine) (PEI) and ionic liquids (ILs) provides a novel strategy for efficiently capturing CO2, and this has garnered widespread attention. However, the intermolecular interactions between the IL and other constituents during the CO2 absorption process remain unclear. In this present work, a series of density functional theory (DFT) calculations and molecular dynamics simulations were conducted to investigate the positive role of IL in CO2 capture by PEI. The results showed that the formation of hydrogen bonds between the IL anion and the amino groups of PEI primarily drives the addition of IL to PEI. During the CO2 absorption process, the IL anion not only can absorb CO2 but also exerts a dehydrogenation effect on the amino group of PEI, facilitating enhanced interaction between PEI and CO2. Additionally, the IL substantially reduces the viscosity of PEI, promoting the diffusion of CO2 within the system and enhancing the absorption rate. Based on the information on interaction energy and viscosity, we can easily make theoretical predictions for the optimal proportion of IL to be added. The above results provide fundamental insights to promote the industrial application of the PEI/IL system for CO2 capture.

Porous Covalent Organic Framework Based Hydrogen-Bond Nanotrap for the Precise Recognition and Separation of Gold.

Utilizing weak interactions to effectively recover and separate precious metals in solution is of great importance but the practice remains a challenge. Herein, we report a novel strategy to achieve precise recognition and separation of gold by regulating the hydrogen-bond (H-bond) nanotrap within the pore of covalent organic frameworks (COFs). It is found that both COF-HNU25 and COF-HNU26 can efficiently capture AuIII with fast kinetics, high selectivity, and uptake capacity. In particular, the COF-HNU25 with the high density of H-bond nanotraps exhibits an excellent gold uptake capacity of 1725 mg g-1 , which is significantly higher than that (219 mg g-1 ) of its isostructural COF (COF-42) without H-bond nanostrap in the pores. Importantly, the uptake capacity is strongly correlated to the number of H-bonds between phenolic OH in the COF and [AuCl4 ]- in water, and multiple H-bond interactions are the key driving force for the excellent gold recovery and reusability of the adsorbent.

Mechanical property analysis and design parameter optimization of a novel nitinol nasal stent based on numerical simulation.

Background: A novel braided nasal stent is an effective alternative to nasal packing after septoplasty that can be used to manage the mucosal flap after septoplasty and expand the nasal cavity. This study aimed to investigate the influence of design parameters on the mechanical properties of the nasal stent for optimal performance. Methods: A braided nasal stent modeling method was proposed and 27 stent models with a range of different geometric parameters were built. The compression behavior and bending behavior of these stent models were numerically analyzed using a finite element method (FEM). The orthogonal test was used as an optimization method, and the optimized design variables of the stent with improved performance were obtained based on range analysis and weight grade method. Results: The reaction force and bending stiffness of the braided stent increased with the wire diameter, braiding density, and external stent diameter, while wire diameter resulted as the most important determining parameter. The external stent diameter had the greatest influence on the elongation deformation. The influence of design parameters on von-Mises stress distribution of bent stent models was visualized. The stent model with geometrical parameters of 25 mm external diameter, 30° braiding angle, and 0.13 mm wire diameter (A3B3C3) had a greater reaction force but a considerably smaller bending stiffness, which was the optimal combination of parameters. Conclusion: Firstly, among the three design parameters of braided stent models, wire diameter resulted as the most important parameter determining the reaction force and bending stiffness. Secondly, the external stent diameter significantly influenced the elongation deformation during the compression simulation. Finally, 25 mm external diameter, 30° braiding angle, and 0.13 mm wire diameter (A3B3C3) was the optimal combination of stent parameters according to the orthogonal test results.

Anchoring LiCl in the Nanopores of Metal-Organic Frameworks for Ultra-High Uptake and Selective Separation of Ammonia.

Ammonia (NH3 ) is an important chemical raw material and a unique carbon-free fuel with high hydrogen energy density. Thus, NH3 capture, storage, and desorption are of significant importance. However, high capacity capture, low energy desorption, and selective separation of NH3 are still challengs so far. Here, we report high-performance hybrid sorbents by anchoring LiCl in the nanopores of MIL-53-(OH)2 metal-organic frameworks (MOFs). It is found that the optimal composite shows a capture capacity of 33.9 mmol g-1 NH3 at 1.0 bar and 25 °C, which far exceeds the current record among the reported porous materials. Notably, the excellent capture capacity at low pressure and high temperature makes it possible to selectively capture NH3 from NH3 /N2 , NH3 /CO2 , and NH3 /H2 O. It is revealed that synergistic action of NH3 coordination to the highly dispersed Li+ in the MOF nanopores and hydrogen bonding of NH3 with Cl- account for such an excellent capture and selectivity performance.

A visible light/heat responsive covalent organic framework for highly efficient and switchable proton conductivity.

In recent years, covalent organic frameworks (COFs) have attracted enormous interest as a new generation of proton-exchange membranes, chemical sensors and electronic devices. However, to design high proton conductivity COFs, especially those with stimulus responsive performance remains a great challenge. Here, the first example of a light/heat switchable COF (COF-HNU9) has been synthesized by grafting a donor-acceptor Stenhouse adduct (DASA) within the channels of a ß-ketoenamine-based COF. DASA groups in the nanopores of COF-HNU9 undergo a reversible open-closed photoisomerization upon visible light irradiation and are recovered by heating. Thus, COF-HNU9 exhibits not only a remarkably high proton conductivity, but also a highly effective switching performance. Under visible light irradiation at 98% RH, the proton conductivity of COF-HNU9 increases by three orders of magnitude at 25 °C and is up to 0.02 S cm-1 at 80 °C. Furthermore, the proton conductivity does not display any significant decrease even after 20 switching cycles. These results have been rationalized by a Grotthuss-type mechanism and verified by DFT calculations. The stimuli-responsive COF is conceptually confirmed by an optical control device with the light/heat switching proton conductive COF-HNU9 film, which is able to remote-control the illumination and switching off of an LED lamp without any current amplifier.

A record ammonia adsorption by calcium chloride confined in covalent organic frameworks.

Ammonia is a vital chemical raw material, but it is also a highly toxic environmenal pollutant. However, its highly efficient uptake and reversible release is a challenge. Herein, we have designed and synthesized a series of hybrid materials for efficient NH3 capture by confining calcium chloride (CaCl2) in a porous covalent organic framework (COF). A high capture capacity of 26.5 mmol g-1 is obtained at 25 °C and 1 bar, which is the highest value among existing porous materials, and NH3 can be easily desorbed at 80 °C under vacuum for 2 h. Particularly, the hybrid COF is highly efficient for the absorption of low NH3 content. Such excellent performance is ascribed to the highly dispersion of CaCl2 in the pores of the COF, and coordinating interaction of NH3 to Ca2+ together with hydrogen bond interaction between NH3 and Cl-.

The Ionic Liquid-H2O Interface: A New Platform for the Synthesis of Highly Crystalline and Molecular Sieving Covalent Organic Framework Membranes.

Covalent organic frameworks (COFs) are highly porous crystalline polymers with uniform pores and large surface areas. Combined with their modular design principle and excellent properties, COFs are an ideal candidate for separation membranes. Liquid-liquid interfacial polymerization is a well-known approach to synthesize membranes by reacting two monomers at the interface. However, volatile organic solvents are usually used, which may disturb the liquid-liquid interface and affect the COF membrane crystallinity due to solvent evaporation. Simultaneously, the domain size of the organic solvent-water interface, named the reaction zone, can hardly be regulated, and the diffusion control of monomers for favorable crystallinity is only achieved in the water phase. These drawbacks may limit the widespread applications of liquid-liquid interfacial polymerization to synthesize diverse COF membranes with different functionalities. Here, we report a facile strategy to synthesize a series of imine-linked freestanding COF membranes with different thicknesses and morphologies at tunable ionic liquid (IL)-H2O interfaces. Due to the H-bonding of the catalysts with amine monomers and the high viscosity of the ILs, the diffusion of the monomers was simultaneously controlled in water and in ILs. This resulted in the exceptionally high crystallinity of freestanding COF membranes with a Brunauer-Emmett-Teller (BET) surface area up to 4.3 times of that synthesized at a dichloromethane-H2O interface. By varying the alkyl chain length of cations in the ILs, the interfacial region size and interfacial tension could be regulated to further improve the crystallinity of the COF membranes. As a result, the as-fabricated COF membranes exhibited ultrahigh permeance toward water and organic solvents and excellent selective rejection of dyes.

Exceptional High and Reversible Ammonia Uptake by Two Dimension Few-layer BiI3 Nanosheets.

The emission of NH3 into atmosphere is seriously harmful for human health and public safety, thus the capture and recovery of NH3 from ammonia emissions is highly desirable. In recent years, many kinds of solid adsorbents have been exploited to absorb NH3. However, these materials do not show the advantages of high uptake capacity and good recyclability at the same time. Here, nontoxic and low cost few-layer BiI3 nanosheets have been prepared from bulk BiI3 powder by a simple and efficient liquid phase exfoliation strategy using green solvents and then applied for the NH3 capture for the first time. The results show that the adsorption capacity of NH3 of BiI3 nanosheets reaches up to 22.6 mmol/g at 1.0 bar and 25 °C, which approaches the record value for NH3 adsorption. Importantly, the NH3 uptake in BiI3 nanosheets is completely reversible and no clear loss in uptake capacity is observed after 10 cycles of adsorption-desorption. Furthermore, the BiI3 nanosheets exhibit remarkable selectivity for the separation of NH3/CO2 at 70 °C with theoretical selectivity coefficient of 700, which is promising for the selective separation of NH3 and CO2 in hot tail gas of some industrial processes. Mechanism studies indicate that such superior NH3 capacity, excellent reversibility and remarkable selectivity are primarily attributed to the Bi3+-NH3 coordination interactions.

An Ultrastable Crystalline Acylhydrazone-Linked Covalent Organic Framework for Efficient Removal of Organic Micropollutants from Water.

As an important member of crystalline porous polymers, acylhydrazone-linked covalent organic frameworks (COFs) have gained much attention in recent years. However, the low structural stability imparts a limit on their practical applications. To tackle this problem, we report a simple strategy to increase the chemical stability of acylhydrazone-linked COFs by incorporating azobenzene groups in the conjugated framework. Through reinforcing the π-π stacking interactions between the adjacent layers with increased π-surface, it is surprising to find that the resulting materials exhibit extreme stability in harsh environments, such as in strong acid, strong base, aqueous educing agent and boiling water, even exposed to air for one year. As a proof-of-concept, such frameworks have been used to remove various organic micropollutants such as antibiotics, plastic components, endocrine disruptors, and carcinogens from water with high capacity, fast speed and excellent reusability over a wide pH range at environmentally relevant concentrations. The results provide a new avenue to significantly enhance the stability of COFs for practical applications.

Ambient CO2/N2 Switchable Pickering Emulsion Emulsified by TETA-Functionalized Metal-Organic Frameworks.

In recent years, metal-organic frameworks (MOFs) have been explored as emulsifiers for the fabrication of Pickering emulsions and then used for hybrid material synthesis and interface catalysis. Nevertheless, stimuli-responsive Pickering emulsions stabilized by MOFs have been rarely reported so far, although they are of great importance for fundamental research studies and practical applications. Herein, for the first time, triethylenetetramine (TETA)-functionalized MOFs (ZIF-90/TETA) have been designed, synthesized, and used for fabricating CO2-/N2-response Pickering emulsions. It is shown that even at the ZIF-90/TETA content of 0.25 wt %, the functional MOF can still efficiently emulsify n-hexane and water to form a high internal phase Pickering emulsion. Importantly, the Pickering emulsion can be easily and reversibly switched between emulsification and demulsification by bubbling of CO2 and N2 alternatively at atmospheric pressure. The possible mechanism of the CO2/N2 switchable emulsion is investigated by zeta potential, water contact angle, interfacial tension, 13C NMR spectroscopy, and an optical microscope. It is found that the acid-base reaction of CO2 with TETA anchored on the surface of ZIF-90 leads to the production of hydrophilic ammonium bicarbonate and carbamate, which results in the emulsification of the Pickering emulsion. However, when N2 is bubbled to remove CO2, the reverse reaction takes place to cause the demulsification of the Pickering emulsion. Moreover, the CO2/N2 switchable Pickering emulsion has been successfully used as a microreactor for Knoevenagel reactions to demonstrate a highly efficient integration of chemical reaction, product separation, and ZIF-90/TETA recycling for a sustainable chemical process.

A novel crystalline azine-linked three-dimensional covalent organic framework for CO2 capture and conversion.

The targeted synthesis of three-dimensional covalent organic frameworks (3D COFs) is a great challenge, especially those synthesized by using a new kind of organic linkage. Herein, for the first time, a novel 3D azine-linked COF (3D-HNU5) has been synthesized and characterized. It is shown that the obtained 3D COF has a 2-fold interpenetrated diamond topology, and shows good chemical/thermal stability and a narrow pore size distribution, which exhibits excellent performance in the selective uptake of CO2 over N2. Moreover, the 3D-HNU5 is found to be an efficient catalyst for the cycloaddition of propargylic alcohols with CO2 into carbonates with excellent catalytic activity under mild conditions.

Cu(I)/Ionic Liquids Promote the Conversion of Carbon Dioxide into Oxazolidinones at Room Temperature.

Recently, the efficient chemical fixation of carbon dioxide (CO2) into high value chemicals without using noble metal catalysts has become extremely appealing from the viewpoint of sustainable chemistry. In this work, a one-pot three component reaction of propargylic alcohols, anines and CO2 that can proceed in an atom economy and environmentally benign manner by combination of CuI and tetrabutylphosphonium imidazol ([P4444][Im]) as a catalyst was described. Catalysis studies indicate that this catalytic system is an effective catalyst for the conversion of CO2 into oxazolidinones at room temperature and ambient pressure without any solvent. The results provide a useful way to design novel noble metal-free catalyst systems for the transformation of CO2 into other valuable compounds.

Imidazolium-Salt-Functionalized Covalent Organic Frameworks for Highly Efficient Catalysis of CO2 Conversion.

The conversion of CO2 into valuable chemicals is an ideal pathway for CO2 utilization in industry, although the development of highly efficient catalysts remains a challenge. Herein, the design and synthesis of two covalent organic frameworks (COFs) functionalized with imidazolium salts were reported as catalysts for CO2 conversion. The resultant COFs possessed highly crystalline structures, showed high stability and surface area, and contained dense catalytic active sites on the pore walls. They exhibited outstanding catalytic performances for the reaction of CO2 with epoxides without any solvent or cocatalyst under mild conditions and afforded a record turnover number of 495 000. In addition, the COFs could serve as effective catalysts in the reductive reaction of CO2 with amines. The results presented here thus demonstrate the exceptional potential of the functionalized COFs for various challenging CO2 transformations.

An Experimental and Theoretical Study on the Unexpected Catalytic Activity of Triethanolamine for the Carboxylative Cyclization of Propargylic Amines with CO2.

Chemical conversion of CO2 under atmospheric pressure and metal-free conditions remains a great challenge. In this work, a series of alkanolamines, low-cost and biodegradable bases, were used to catalyze the carboxylative cyclization of propargylic amines with CO2 . Among these alkanolamines, triethanolamine (TEOA) was found to be a highly efficient organocatalyst for this important transformation at atmospheric pressure, and a series of desired products were synthesized in good to excellent yields. After the reactions, TEOA could be easily recovered and reused without obvious reduction in the efficiency. DFT studies revealed that TEOA may activate CO2 to form a ring-shaped carbonate intermediate that plays an important role in the catalysis of the reaction. This finding provides an effective and environmentally friendly alternative route for the production of 2-oxazolidinones.

Efficient Ionic-Liquid-Promoted Chemical Fixation of CO2 into α-Alkylidene Cyclic Carbonates.

The efficient conversion of CO2 into value-added chemicals under metal-free conditions is of significant importance from the viewpoint of sustainable chemistry. In this work, ionic liquids (ILs) with different properties were used to promote the reaction between CO2 and propargylic alcohol for the synthesis of α-alkylidene cyclic carbonates. The protic IL 1,8-diazabicyclo-[5.4.0]-7-undecenium 2-methylimidazolide ([DBUH][MIm]) was prepared by simple neutralization of the superbase with a weak proton donor and could efficiently promote the reactions in high yields. After the reactions, the IL was separated from the reaction mixtures by simply adding water, and then reused after drying without an observable decrease in the catalytic activity and selectivity. NMR spectroscopy and detailed density functional theory analysis were used to propose a reaction mechanism. Both the cation and anion of the IL played a key synergistic role in promoting the reaction. These findings may be useful for the rational design of novel metal-free and recyclable routes for the reaction between CO2 and propargylic alcohols.