Enhanced mechanic properties of calcium phosphate cements via mussel-inspired adhesive as bone substitute: Highlights of their interactions.

BACKGROUND: Inspired by natural bones, many organic components were added to Calcium Phosphate Cements (CPCs) to improve their mechanical strength. However, the strength of these composite CPCs is limited by the low strength of organic components itself and the weak interaction between organic components and CPCs. OBJECTIVE: Firstly, a composite CPC containing mussel-inspired adhesive, Poly-(Dopamine Methacrylamide-co-2-methoxy Ethylacrylate) (pDM) was developed. Secondly, the interactions between pDM and CPC and their effect on mechanical properties were investigated. METHODS: The interactions between pDM and CPC were performed by Nuclear Magnetic Resonance, Laser Raman, X-ray Photoelectron Spectroscopy, Fourier Transform-Infrared Spectroscopy and X-ray Diffraction Analysis. RESULTS: The toughness and compressive strength of pDM-CPC scaffold were both significantly enhanced, because of the enhanced interface binding strength among CPC and pDM due to their interaction and the improved mechanical strength of pDM owing to its self-oxidation cross-linking. The toughness of pDM-CPC scaffolds increased with the increased contents of pDM, while pDM-CPC scaffold containing 35 wt.% pDM had the highest compressive strength of all, which the latter was more than five times compared to that of CPC. CONCLUSION: The mechanically strong pDM-CPC scaffolds has potential application in bone regeneration as well as in craniofacial and orthopedic repair.

Natural polymer derived hydrogel bioink with enhanced thixotropy improves printability and cellular preservation in 3D bioprinting.

Three-dimensional (3D) bioprinting is evolving into a promising technology by spatially controlling the distribution of living cells for the biomedical field. However, maintaining high printability while protecting cells from damage due to shear stress remains the key challenge for extrusion-based 3D bioprinting. Herein, we developed a novel "protein-polyphenol-polysaccharide" extrusion-based bioink named Gel-TA-Alg@Ca2+ using gelatin (Gel), tannic acid (TA) and sodium alginate (Alg) with quantitative thixotropy by pre-crosslinking with a series of low concentrations of CaCl2 at 0.03, 0.04, 0.05 and 0.06 M, respectively. Our experimental design quantitatively presented the positive proportional functional relationship between the thixotropy of Gel-TA-Alg@Ca2+ and printability (including injectability and formability) for the first time. Importantly, the thixotropy proportionately and significantly elevated cellular viability after 3D bioprinting due to the reduced extrusion force involved in printing. 3D bioprinted constructs composed of Gel-TA-Alg@Ca2+ and MG-63 cells exhibited a good cell viability rate for more than 14 days. These findings provide valuable insights into the rational design of thixotropic bioink and offer more opportunities to probe the relationship between the thixotropy and the success of 3D bioprinting.

Insight into the Molecule Impact of Critical-Sized UHMWPE-ALN Wear Particles on Cells by the Alginate-Encapsulated Cell Reactor.

Wear particles of ultra-high molecular weight polyethylene (UHMWPE) are inevitable during service as joint prosthesis, and particles ≤ 10 µm with critical size could cause serious osteolysis and aseptic loosening of joint prosthesis. The aim of this study is to adopt the alginate-encapsulated cell reactor to investigate the molecular impact of critical-sized wear particles of UHMWPE loaded with alendronate sodium (UHMWPE-ALN) on cells. Results showed that compared with UHMWPE wear particles, UHMWPE-ALN wear particles inhibited the proliferation of macrophages significantly after being co-cultured for 1, 4, 7, and 14 d. Furthermore, the released ALN promoted early apoptosis, suppressed the secretion of TNF-α and IL-6 of macrophages, and down-regulated relative gene expressions of TNF-α, IL-6, and IL-1ß and RANK. In addition, compared with UHMWPE wear particles, UHMWPE-ALN wear particles promoted the ALP activity of osteoblasts, down-regulated the gene expression of RANKL, and up-regulated gene expression of osteoprotegerin. There were mainly two approaches of the effects of critical-sized UHMWPE-ALN wear particles on cells, one of which was cytology and the other was cytokine signal pathway. The former mainly affected the proliferation and activity of macrophages and osteoblasts. The latter would inhibit osteoclasts via cytokine and RANKL/RANK signal pathway. Thus, UHMWPE-ALN had the potential application in clinics to treat osteolysis induced by wear particles.

GTKO rabbit: A novel animal model for preclinical assessment of decellularized xenogeneic grafts via in situ implantation.

Wild type (WT) animals cannot be used to objectively assess the immunogenicity of animal tissue-derived biomaterials when used as recipients due to difference with human in α-Gal expression. The purpose of this study is to compare the differences of immunological responses between the GGTA1 gene-knockout (GTKO) rabbits and WT rabbits after implantation with animal tissue-derived biomaterials. The porcine-derived decellularized bone matrix (natural bone material, NBM) and fresh porcine cancellous bone (PCB) were implanted in GTKO rabbits and WT rabbits, respectively, and sham operation was used as control (Con). At 2- and 6-week post-implantation, the related immunological items including antibody levels, serum-mediated cell lysis, cytokines, lymphocyte subtypes, and histopathological changes were assessed. GTKO rabbits exhibited more sensitive immune responses than WT rabbits after PCB implantation, resulted from a significant increase of antibodies (except total antibodies) and cytokines levels, cell lysis ratios, CD4/CD8 proportions, and inflammatory cells infiltration. Immunological factors and inflammatory cells infiltrate in GTKO rabbits after NBM implantation were significantly lower than those in the PCB group. Among the three groups, the NBM group showed the highest contents of new bone formation elements. In conclusion, the GTKO rabbit is a more sensitive alternative model than WT rabbit for preclinical study of xenografts via in situ implantation. Studies on multiple gene-edited animals are also necessary for more comprehensively evaluating xenoimmunologen risks of animal tissue-derived biomaterials in the future. Additionally, the immunogenicity of NBM was remarkably decreased compared to PCB.

Macropore Regulation of Hydroxyapatite Osteoinduction via Microfluidic Pathway.

Macroporous characteristics have been shown to play a key role in the osteoinductivity of hydroxyapatite ceramics, but the physics underlying the new bone formation and distribution in such scaffolds still remain elusive. The work here has emphasized the osteoinductive capacity of porous hydroxyapatite scaffolds containing different macroporous sizes (200-400 µm, 1200-1500 µm) and geometries (star shape, spherical shape). The assumption is that both the size and shape of a macropore structure may affect the microfluidic pathways in the scaffolds, which results in the different bone formations and distribution. Herein, a mathematical model and an animal experiment were proposed to support this hypothesis. The results showed that the porous scaffolds with the spherical macropores and large pore sizes (1200-1500 µm) had higher new bone production and more uniform new bone distribution than others. A finite element analysis suggested that the macropore shape affected the distribution of the medium-high velocity flow field, while the macropore size effected microfluid speed and the value of the shear stress in the scaffolds. Additionally, the result of scaffolds implanted into the dorsal muscle having a higher new bone mass than the abdominal cavity suggested that the mechanical load of the host tissue could play a key role in the microfluidic pathway mechanism. All these findings suggested that the osteoinduction of these scaffolds depends on both the microfluid velocity and shear stress generated by the macropore size and shape. This study, therefore, provides new insights into the inherent osteoinductive mechanisms of bioceramics, and may offer clues toward a rational design of bioceramic scaffolds with improved osteoinductivity.

α-Gal antigen-deficient rabbits with GGTA1 gene disruption via CRISPR/Cas9.

BACKGROUND: Previous studies have identified the carbohydrate epitope Galα1-3Galß1-4GlcNAc-R (termed the α-galactosyl epitope), known as the α-Gal antigen as the primary xenoantigen recognized by the human immune system. The α-Gal antigen is regulated by galactosyltransferase (GGTA1), and α-Gal antigen-deficient mice have been widely used in xenoimmunological studies, as well as for the immunogenic risk evaluation of animal-derived medical devices. The objective of this study was to develop α-Gal antigen-deficient rabbits by GGTA1 gene editing with the CRISPR/Cas9 system. RESULTS: The mutation efficiency of GGTA1 gene-editing in rabbits was as high as 92.3% in F0 pups. Phenotype analysis showed that the α-Gal antigen expression in the major organs of F0 rabbits was decreased by more than 99.96% compared with that in wild-type (WT) rabbits, and the specific anti-Gal IgG and IgM antibody levels in F1 rabbits increased with increasing age, peaking at approximately 5 or 6 months. Further study showed that GGTA1 gene expression in F2-edited rabbits was dramatically reduced compared to that in WT rabbits. CONCLUSIONS: α-Gal antigen-deficient rabbits were successfully generated by GGTA1 gene editing via the CRISPR/Cas9 system in this study. The feasibility of using these α-Gal antigen-deficient rabbits for the in situ implantation and residual immunogenic risk evaluation of animal tissue-derived medical devices was also preliminarily confirmed.

Hybridizing gellan/alginate and thixotropic magnesium phosphate-based hydrogel scaffolds for enhanced osteochondral repair.

Osteochondral defects include the damage of cartilage and subchondral bone, which are still clinical challenges. The general replacements are difficult to simultaneously repair cartilage and subchondral bone due to their various requirements. Moreover, appropriate printable bioactive materials were needed for 3D bioprinting personalized scaffolds for osteochondral repairing. Herein, the novel hydrogel was developed by hybridizing the alginate sodium (SA) and gellan gum (GG) with the inorganic thixotropic magnesium phosphate-based gel (TMP-BG) in the pre-crosslinking of Mg2+ to enhance osteochondral repairing. SA-GG/TMP-BG hybrid hydrogels possessed controllable rheological, injectable, mechanical properties and porosities by tuning their ratio. The shear-thinning of SA-GG/TMP-BG was responsible for its excellent injectability. SA-GG/TMP-BG hybrid hydrogels displayed good cell compatibility, on which MG-63 and BMSCs cells attached and spread well with the high proliferation and up-regulated osteogenic genes. In addition, the inorganic TMP-BG gel hybridized with SA-GG hydrogel released Mg2+ was conducive to recruiting BMSCs and promoting the osteogenic and chondrogenic differentiation of BMSCs. Histological results confirmed that SA-GG/TMP6040 significantly promoted the osteogenesis of subchondral bone and then further facilitated the cartilage repairing after being implanted in osteochondral defects of rabbits for 6 and 12 weeks. Our finding revealed that the inorganic TMP-BG endowed the excellent osteogenic activity of the hybrid hydrogels, which played a key role in successful osteochondral repairing. The newly SA-GG/TMP-BG hybrid hydrogels appeared to be promising materials for osteochondral repairing and the further 3D bioprinting.

Immunological Risk Assessment of Xenogeneic Dural Patch by Comparing with Raw Material via GTKO Mice.

OBJECTIVE: In this study, α-Gal epitope-deficient (GGTA1 knockout (GTKO)) mice were used to assess the immunological risks of xenogeneic dural patch by comparing with raw material. METHODS: The xenogeneic dural patch (T2) was prepared from bovine pericardium (T1, raw material) through decellularization and carboxymethyl chitosan (CMCS) coating. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used to characterize the collagen fibers and surface microstructural changes in the T1 and T2 samples. The remnant α-Gal epitopes and DNA of implants were detected by standardized method. T1 and T2 were implanted subcutaneously into GTKO mice for 4 and 12 weeks, respectively, and the negative control group (Con) was only performed sham operation. The total serum antibody, anti-Gal antibody, and splenic lymphocyte subtypes were analyzed by ELISA or flow cytometry, and histological analysis of implant-tissue was performed by H&E and Masson stain. RESULTS: TEM and Sirius red staining showed that the collagen fibers in the dural patch were closely arranged, and SEM showed that a loose three-dimensional structure was successfully constructed on the surface of the dural patch after CMCS coating. The remnant DNA in T2 was 24.64 ± 8.73 ng/mg (dry weight), and clearance of α-Gal epitope was up to 99.83% compared to T1. The significant increases in serum total IgM, anti-Gal IgG, and anti-Gal IgM at 4 weeks and the significant changes in anti-Gal IgG and spleen lymphocyte at 12 weeks were observed in the T1 group, but no significant change was observed in the T2 group, compared to the control group. Histological semiquantitative analysis showed severe cell and tissue responses at 4 weeks and a moderate response at 12 weeks in the T1 group, while a moderate response at 4 weeks and a slight response at 12 weeks in the T2 group. CONCLUSIONS: The results demonstrated that the xenogeneic dural patch has a lower and acceptable immunological risk compared to the raw material and control, respectively. On the other hand, it was suggested that GTKO mice are useful experimental model for immunological risk assessment of animal tissue-derived biomaterials.

Hydrogel-By-Design: Smart Delivery System for Cancer Immunotherapy.

Immunotherapy has emerged as a promising strategy for cancer treatment, in which durable immune responses were generated in patients with malignant tumors. In the past decade, biomaterials have played vital roles as smart drug delivery systems for cancer immunotherapy to achieve both enhanced therapeutic benefits and reduced side effects. Hydrogels as one of the most biocompatible and versatile biomaterials have been widely applied in localized drug delivery systems due to their unique properties, such as loadable, implantable, injectable, degradable and stimulus responsible. Herein, we have briefly summarized the recent advances on hydrogel-by-design delivery systems including the design of hydrogels and their applications for delivering of immunomodulatory molecules (e.g., cytokine, adjuvant, checkpoint inhibitor, antigen), immune cells and environmental regulatory substances in cancer immunotherapy. We have also discussed the challenges and future perspectives of hydrogels in the development of cancer immunotherapy for precision medicine at the end.

Enhanced proliferation and angiogenic phenotype of endothelial cells via negatively-charged alginate and chondroitin sulfate microsphere hydrogels.

Sodium alginate-based hydrogel was the one of the most used polymers for cell delivery. However, the adsorption of extracellular matrix and proteins was inhibited due to the formation of a hydrated surface layer of these hydrogels. In this study, a novel cell delivery system, negatively-charged alginate and chondroitin sulfate microsphere hydrogel (nCACSMH), was fabricated with excellent permeability and biocompatibility in the action of a high voltage direct-current electric field. Negative charge was introduced to the surface of nCACSMH to obtain the expanded network and enhanced permeability. Additionally, the increasing content of chondroitin sulfate in nCACSMH could give rise to the charge density and its asymmetric structure, thus the uneven, plicate and expanded surface of nCACSMH which was favorable to cell proliferation was developed. Moreover, chondroitin sulfate was released with the degradation of nCACSMH, which played a crucial role in maintaining the normal physiological functions of cells. Thus the proliferation of human umbilical vein endothelial cells (HUVECs) was further accelerated and the angiogenesis related genes expression in endothelial cells was continuously and dramatically up-regulated. After 4 d, the proliferation and viability of HUVECs were significantly improved, the cells were distributed evenly in nCACSMH. The novel nCACSMH has the potential to be used as cell delivery, three-dimensional (3D) cell cultures for cell therapy, 3D bioprinting, high-throughput screening for drugs, and disease model for regeneration and constructing of tissue engineering.

3D Bioprinting of shear-thinning hybrid bioinks with excellent bioactivity derived from gellan/alginate and thixotropic magnesium phosphate-based gels.

3D Bioprinting is expected to become a strong tool for regenerative medicine, but satisfactory bioinks for the printing of constructs containing living cells are lacking due to the rigorous requirement of high printability and biocompatibility, which are often contradictory. Here, we have reported the development of a novel hybrid bioink by combining rigid gellan gum (GG), flexible sodium alginate (SA), and a bioactive substance thixotropic magnesium phosphate-based gel (TMP-BG). The ratio of these components was first optimized to obtain satisfactory gelating, mechanical, rheological, and printing properties. The formulated hybrid GG-SA/TMP-BG bioink had a good printability due to the shear-thinning and its multiple cross-linking by Mg2+ and Ca2+. The tunable mechanical performance of the hybrid bioink could simulate various extracellular matrices of the different tissues and support integrity of 3D printing constructs. Moreover, the hybrid bioink induced apatite deposition during immersion in simulated body fluids, and also promoted cell proliferation in vitro. MG-63 osteosarcoma cells were dispersed in the bioink and printed into 3D constructs. The cells exhibited good cell survival due to the shear-thinning property of the bioink and the ion concentration used for cross-linking. The proliferation rate of the cells also significantly exceeded those in non-printed samples. Confocal microscopy revealed a homogeneous distribution of cells in the printed constructs, and survival for more than 7 d. In vivo animal experiments showed that the hybrid bioink without cells could induce osteochondral repair. Therefore, this hybrid bioink has good printability, biocompatibility, mechanical support, and bioactivity, which is expected to have promising applications in 3D bioprinting.

The Coronavirus PEDV Evades Type III Interferon Response Through the miR-30c-5p/SOCS1 Axis.

Porcine epidemic diarrhea virus (PEDV) is an economically important pathogen that has evolved several mechanisms to evade type I IFN responses. Type III interferon (IFN-λ), an innate cytokine that primarily targets the mucosal epithelia, is critical in fighting mucosal infection in the host and has been reported to potently inhibit PEDV infection in vitro. However, how PEDV escapes IFN-λ antiviral response remains unclear. In this study, we found that PEDV infection induced significant IFN-λ expression in type I IFN-defective Vero E6 cells, but virus-induced endogenous IFN-λ did not reduce PEDV titers. Moreover, we demonstrated that PEDV escaped IFN-λ responses by substantially upregulating the suppressor of cytokine signaling protein 1 (SOCS1) expression, which impaired the induction of IFN-stimulated genes (ISGs) and dampened the IFN-λ antiviral response and facilitated PEDV replication in Vero E6 cells. We further showed that PEDV infection increased SOCS1 expression by decreasing host miR-30c-5p expression. MiR-30c-5p suppressed SOCS1 expression through targeting the 3' untranslated region (UTR) of SOCS1. The inhibition of IFN-λ elicited ISGs expression by SOCS1 was specifically rescued by overexpression of miR-30c-5p. Collectively, our findings identify a new strategy by PEDV to escape IFN-λ-mediated antiviral immune responses by engaging the SOCS1/miR-30c axis, thus improving our understanding of its pathogenesis.

Joint construction of micro-vibration stimulation and BCP scaffolds for enhanced bioactivity and self-adaptability tissue engineered bone grafts.

The bone defects caused by trauma and disease have become a major difficulty in the treatment of clinical bone defects, and bone tissue engineering has become a promising treatment strategy. It was found that mechanical stimulation regulated the development of bone constructs by affecting the distribution and differentiation of cells on them. In this study, tissue-engineered bone grafts with enhanced bioactivity and self-adaptability were constructed by BMSCs and biphasic calcium phosphate (BCP) scaffolds under periodic micro-vibration stimulation (MVS) with a frequency of 40 Hz and a magnitude of 0.3 g. The results of the material characterization indicated that the BCP scaffolds created a more favourable osteogenic micro-environment with promoted calcium ion release, protein adsorption and mineralization deposition under the micro-vibration stimulation. The in vitro results showed that the apoptosis of BMSCs increased significantly on day 1, but from day 3 on, the proliferation increased and apoptosis decreased. Cells were evenly distributed on the scaffolds, exhibiting tight adhesion in a flat-shape and distinct matrix mineralization. F-actin and ALP expression significantly increased and meanwhile osteogenesis-related genes including Runx2, Col-I, ALP, and OCN were significantly up-regulated. Western blotting results suggested that the ERK1/2 and Wnt/ß-catenin signalling pathways were involved in the osteogenic behaviour of BMSCs induced by MVS. In vivo experiments showed that grafts had stronger osteoinduction and mechanical adaptability. Taken together, this study suggested that micro-vibration stimulation combined with BCP scaffolds with good osteoinduction could be a promising approach for constructing tissue engineered bone grafts with enhanced bioactivity, mechanical adaptability, and bone regeneration repair capability.

Development of a revised ICC-qPCR method used for Pseudorabies virus inactivation validation study of biologically sourced materials.

To develop a precise and convenient method to evaluate the virus transmission risk of biologically sourced materials, an integrated cell culture-qPCR (ICC-qPCR) method for Pseudorabies virus (PRV) was established and revised for applications to this new field. The optimized post-infection period was found at 12-hr to achieve a reasonable detection limit (-0.25 Log10TCID50/100 µL, Logs) and a quantitative range (0.75-3.75 Logs). The results of mimic samples suggested that three 10-fold dilutions at the time of virus inoculation combined with three washes after virus absorption, and the sets of non-amplified samples as controls could efficiently eliminate the false positive signals caused by high levels of noninfectious viruses. The virus inactivation validation studies of acellular porcine corneas suggested that the logs inactivation of PRV at 12 kGy irradiation dose obtained by general ICC-qPCR, revised ICC-qPCR and cell culture were 2.49, 4.85 and 5.08, respectively. At 25 kGy, those were 2.31, 4.85 and 5.08, respectively. The results obtained by the revised ICC-qPCR were consistent with cell culture and more precise than general ICC-qPCR. Therefore, the revised ICC-qPCR proposed in this study has an application prospect in the PRV inactivation validation studies of biologically sourced materials.

Progress in the study of virus detection methods: The possibility of alternative methods to validate virus inactivation.

Virus inactivation validation studies have been widely applied in the risk assessment of biogenic material-based medical products, such as biological products, animal tissue-derived biomaterials, and allogeneic biomaterials, to decrease the risk of virus transmission. Traditional virus detection methods in an inactivation validation study utilize cell culture as a tool to quantify the infectious virus by observing cytopathic effects (CPEs) after virus inactivation. However, this is susceptible to subjective factors because CPEs must be observed by experts under a microscope during virus titration. In addition, this method is costly and time- and labor-consuming. Molecular biological technologies such as quantitative polymerase chain reaction (qPCR) have been widely used for virus detection but cannot distinguish infectious and noninfectious viruses. Therefore, qPCR cannot be directly applied to virus inactivation validation studies. In this paper, methods to detect viruses and progress in the challenge of differentiating infectious and noninfectious viruses with the combination of pretreatment and qPCR techniques such as the integrated cell culture-qPCR (ICC-qPCR) method are reviewed. In addition, the advantages and disadvantages of each new method, as well as its prospect in virus inactivation validation studies, are discussed.

[Mechanical Reinforcement Strategy of Calcium Phosphate Cements by Loading Polymers].

Calcium phosphate cement (CPC) is well known for the excellent bioactivity and biocompatibility, however, CPC has been used only for the repair of non-load bearing bone defects due to its brittle nature and low flexural strength. Polymer reinforced CPC has been considered as one of the most effective strategies for mechanical reinforcement. This paper summarizes various kinds of polymers loaded CPC:fiber reinforcement, microsphere reinforcement and dual setting cements. It is aimed to analyze the advantages, disadvantages and principles of the polymers reinforced CPC, and so as to lay a foundation for the further research of improving and manufacturing the CPC with ideal mechanical properties.

A Tiered Experimental Approach for Characterization and Silver Release of Silver-Containing Wound Dressings.

Silver-containing dressings are widely used for wound care owing to their broad-spectrum microbicidal activity. However, the potential adverse effects on human health emerging from exposure to their active ingredients (silver ions or nanoparticles) have resulted in widespread concerns about their use. The release profiles of various chemical forms of silver (Ag) from silver-containing dressing are closely related to their bioavailability and potential adverse effects on the body. In this research, we demonstrated a tiered experimental approach for systematic characterization and assessment of silver-containing wound dressing, which provides information for risk assessments. The combination of scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray, X-ray photoelectron spectroscopy, and X-ray diffraction allowed for systematic characterization of silver-containing dressings including their morphology, size, composition, valence state, and crystal forms, which have a close relationship with their silver release profile, antimicrobial activity, and potential toxicity. We developed an Ag release experiment using a reciprocating holder method and an ultrafiltration membrane column to separate the silver nanoparticles (AgNPs) and silver ions released from the dressing. Furthermore, by adjusting the Ag-ion concentration in the release media (simulated body fluid) we could effectively eliminate the interference from AgCl particles, which have a similar size to the AgNPs. We used our method to analyze the release profiles and the chemical form of the Ag present in three commercial silver-containing dressings. A large variation in the total Ag content, amount of released Ag-ions, and amount of released AgNPs was observed in the three dressings that were tested. The silver release profiles were highly dependent on the crystal structures, surface coating process, and binding modes. The cytotoxicity assays were consistent with the characterization data. This tiered approach provides valuable information of optimized AgNPs usage and proper manufacturing process for further safe applications. This study establishes a systematic characterization methodology for better understanding of risk assessment of nano-embeded consumer products.

A novel thixotropic magnesium phosphate-based bioink with excellent printability for application in 3D printing.

The emergence of 3D bioprinting is expected to solve the present puzzle in the field of regenerative medicine. However, the appropriate bioink was lacking due to the rigorous requirement of high printability and biocompatibility, which was often contradictory. In this study, a novel thixotropic magnesium phosphate-based gel (TMP-BG) was prepared and its application in 3D printing was explored. The stable gel could be synthesized by adjusting the ratio of ternary reactants (NaOH, Mg(OH)2, and H3PO4). Moreover, the structure, morphology, particle size and composition of TMP-BG were characterized. Furthermore, the rheological and thixotropic behaviors and degradation of TMP-BG were investigated. The printability of TMP-BG was tested by using the extrusion-based 3D printer. The biocompatibility of TMP-BG was evaluated in vitro. The composition of TMP-BG was MgNa3H(PO4)2, which was of nanometer and sub-micro scale and easily formed a complex three-dimensional porous structure. Rheological results showed that the gel had notable shear thinning behavior and good thixotropy, which could provide the TMP-BG with injectability and formability simultaneously. In addition, the thixotropic mechanisms of TMP-BG were speculated to be a model of "house of cards". Finally, TMP-BG could be printed into large-sized and different complex three-dimensional structures. Results of the MG-63 cell viability and cell proliferation confirmed the biocompatibility of TMG-BG. The present newly developed TMP-BG has the potential to be used as 3D printing bioink involving living cells for future applications in regenerative medicine.

Enhanced Repairing of Critical-Sized Calvarial Bone Defects by Mussel-Inspired Calcium Phosphate Cement.

The goal of this study is to investigate the biological response of mussel-inspired calcium phosphate cement (CPC) in vivo. Polydopamine (PDA), which is analogous to that of mussel adhesive proteins, was added in CPC. PDA-CPC was implanted into the femur, muscle, and critical-sized calvarial bone defects of rabbits. Histomorphometry of the sequential fluorescence sections showed that PDA-CPC was capable of forming more newborn bone than the control-CPC. More new bone, bone marrow cavity, and blood vessel were observed in PDA-CPC than in the control-CPC in decalcified and undecalcified histological sections. Necrosis bone was not observed in PDA-CPC, whereas it appeared in the control-CPC after 2 weeks. The histological sections in muscle witnessed that there was more ingrowth of collagen in PDA-CPC than that in the control-CPC. There were no significantly difference in the number of leukocyte between PDA-CPC and the control-CPC in blood. It was confirmed that the addition of PDA enhanced the bone repairing ability and biocompatibility of PDA-CPC. Push-out testing indicated that PDA increased the bonding strength between PDA-CPC and host bone in the early stage. These present results indicated that PDA-CPC might be one potential bone graft with gratifying biocompatibility and enhanced bone repairing.

Biological responses to M13 bacteriophage modified titanium surfaces in vitro.

Phage-based materials have showed great potential in tissue engineering application. However, it is unknown what inflammation response will happen to this kind of materials. This work is to explore the biological responses to M13 bacteriophage (phage) modified titanium surfaces in vitro from the aspects of their interaction with macrophages, osteoblasts and mineralization behavior. Pretreated Ti surface, Ti surfaces with noncrosslinked phage film (APP) and crosslinked phage film (APPG) were compared. Phage films could limit the macrophage adhesion and activity due to inducing adherent-cell apoptosis. The initial inflammatory activity (24h) caused by phage films was relatively high with more production of TNF-α, but in the later stage (7-10days) inflammatory response was reduced with lower TNF-α, IL-6 and higher IL-10. In addition, phage films improved osteoblast adhesion, differentiation, and hydroapatite (HA)-forming via a combination of topographical and biochemcial cues. The noncrosslinked phage film displayed the best immunomodulatory property, osteogenic activity and HA mineralization ability. This work provides better understanding of inflammatory and osteogenetic activity of phage-based materials and contributes to their future application in tissue engineering. STATEMENT OF SIGNIFICANCE: In vivo, the bone and immune cells share a common microenvironment, and are being affected by similar cytokines, signaling molecules, transcription factors and membrane receptors. Ideal implants should cause positive biological response, including adequate and appropriate inflammatory reaction, well-balanced bone formation and absorption. Phage-based materials have showed great potential in tissue engineering application. However, at present it is unknown what inflammation response will happen to this kind of materials. A good understanding of the immune response possibly induced by phage-based materials is needed. This work studied the osteoimmunomodulation property of phage films on titanium surface, involving inflammatory response, osteogenic activity and biomineralization ability. It provides more understanding of the phage-based materials and contributes to their future application in tissue engineering.