RESUMEN
Background: India became the first country in the WHO South-East Asia Region (SEAR) to introduce the rotavirus vaccine (RVV) in the Universal immunization programme (UIP) in 2016 with nationwide expansion by 2019. It was a landmark move to reduce the diarrheal disease burden in under-five children. To assess the implementation process of introduction of RVV, Post Introduction Evaluation (PIE) was conducted in March 2022. Methods: The evaluation was conducted across 14 states, 28 districts and 28 health facilities to obtain a nationwide geographical inclusion. Stakeholders involved in program decision-making, planning, training, vaccine delivery, logistics, and communication from all levels (National, state, district, health facility, health worker, caregiver) were interviewed using standardized data collection tool for PIE (adapted from the standard WHO PIE questionnaire) and scripted on a digital tool. Results: A total of 260 interviews were conducted. Political willingness, well-planned preparedness activities, securing vaccines timely, strong supply chain monitoring, availability of domestic RVV products, quality trainings and intense communication activities were the key factors identified for the successful RVV introduction. Key activities during the introduction included cold chain space assessment, trainings of healthcare workforce, dissemination of job aids, updation of recording & reporting formats and strengthening of AEFI surveillance. Lack of community awareness for immunization in a few areas, fear of AEFI amongst some caregivers and local issues with Alternate Vaccine Delivery (AVD) were some reported challenges in achieving high coverage for RVV. Conclusions: Overall, the nationwide roll-out of RVV was smooth and the vaccine has been well-accepted in the community. The assessment emphasizes on having a well-strategized operational and communication planning, which is very crucial for any new vaccine introduction.
RESUMEN
OBJECTIVE: Telehealth is the use of technology to deliver medical services. Potential uses among veterinarians include consulting with specialists about complicated cases, sending in electronic prescriptions, or meeting with clients to discuss patient health. Although the coronavirus disease 2019 pandemic posed many challenges to the veterinary profession, it accelerated the adoption of telehealth among veterinarians. As many of these changes took place quickly in response to the pandemic, many of those in practice did not receive much training or guidance; therefore, this study explores veterinary students' perceptions regarding incorporating telehealth into the veterinary curriculum and the utilization of telehealth in the future. METHODS: An email survey was sent to students at a veterinary school. RESULTS: 80 students provided answers to the 11-question survey. Nearly 80% reported that it is either "important" or "very important" to incorporate telehealth training into the veterinarian curriculum, whereas almost 90% indicated that they would benefit from more telemedicine training prior to graduation. Almost 75% of participants had legal and malpractice concerns, which may present a barrier to using the technology upon graduation. CONCLUSIONS: This study suggests that veterinary schools should explore how to incorporate telehealth training into their curriculum, especially in regard to navigating the potential pitfalls that may be encountered when employing telehealth within the context of a veterinarian-client-patient relationship. CLINICAL RELEVANCE: Telehealth is a valuable tool, and its use has become commonplace. Educational programs that emphasize telehealth will better equip future clinicians to manage the nuances of this modality in practice.
RESUMEN
Haloferax and Halobellus are the representatives of the family Haloferacaceae and they are dominant in hypersaline ecosystems. Some Haloferax and Halobellus species exhibit a close evolutionary relationship. Genomic, phylogenetic (based on 16S rRNA gene sequence), and phylogenomic analysis were performed to evaluate the taxonomic positions of the genera Haloferax and Halobellus. Based on the results we propose to reclassify Halobellus ramosii as a later heterotypic synonym of Halobellus inordinatus; Haloferax lucentense and Haloferax alexandrinum as later heterotypic synonyms of Haloferax volcanii.
Asunto(s)
Filogenia , ARN Ribosómico 16S , ARN Ribosómico 16S/genética , Haloferax/genética , Haloferax/clasificación , Análisis de Secuencia de ADN , ADN de Archaea/genética , ADN de Archaea/químicaRESUMEN
Background and aims: The Rotavirus vaccine (RVV) introduction is a landmark event in the history of Indian public health as for the first time a novel, low-cost indigenous vaccine was introduced in a short timeline between 2016 and 2019. As per WHO mandate, post-introduction evaluation (PIE) be conducted within 6 to 12 months of vaccine introduction to provide an understanding of the operational aspects of the program. For RVV PIE, an innovative approach to developing and deploying a digitized tool was employed. The present study aims to document the processes followed for digitizing the data collection and analysis tools. Methods: The development of the RVV-PIE digital tool was undertaken in two phases. In the first phase, conceptualization and iteration of the modified WHO PIE tool were undertaken. Questions were organized sequentially to ensure natural progression in responses. The finalized questionnaire was converted to a digital version and extensive dummy data was entered to improve automated qualitative data analysis. Phase 2 involved updating the draft tool and incorporating changes to provide a field-tested version for deployment. Results: The digital version of the tool was successfully developed. The GPS functionality of the tool allowed live tracking of data collection making the process more accountable. The tool was prepopulated with reference materials and data points for easy reference and retrieval by the evaluators. The digitization of the tool also allowed easy visualization of data through maps, charts, and graphs on a real-time user-friendly dashboard. Conclusions: The digitization of the PIE tool for RVV in India has been a great learning experience where the dire situation of an ongoing pandemic catapulted us towards a more efficient and comprehensive process innovation. The RVV PIE tool could serve as a customizable digital PIE tool for other health programs heralding an era of a more effective and proficient process of PIE.
RESUMEN
Objective: This study aimed to provide valuable insights into the current research status and gaps in digital intraoral scanner literature in dentistry. Methodology: Scopus Search Query TITLE-ABS-KEY (intraoral AND scanners AND (dentistry OR digital AND dentistry)). The search query used in Scopus for the bibliometric analysis was "TITLE-ABS-KEY (intraoral AND scanners AND (dentistry OR digital AND dentistry))." This query indicates that the analysis focused on documents in which the title, abstract, or keywords contained the terms "intraoral," "scanners," and either "dentistry" or "digital dentistry." Results: The analysis covers a timespan from 1998 to 2023 and includes 331 documents sourced from 136 publications. The annual growth rate of research in this field is reported to be 15.9%, indicating a steady increase over time. Among the top sources, the "Journal of Esthetic and Restorative Dentistry" and the "Journal of Prosthetic Dentistry" have the highest number of articles, indicating their significance in the field. Some notable authors and their corresponding statistics include WÖSTMANN B, with 15 articles and a fractionalized value of 3.16, and SCHLENZ MA, with 14 articles and a fractionalized value of 2.91. The United States has the highest number of articles, indicating a significant presence in research publications. Germany closely follows this, demonstrating a notable contribution to the scientific community. Conclusions: This bibliometric analysis of intraoral scanners used in dentistry provided valuable insights into the current state of research and scholarly publications in this field. This analysis sheds light on the trends, patterns, and advancements in the use of these scanners in dental practice.
RESUMEN
Aim: The integration of advanced technologies, including three-dimensional (3D) imaging modalities and virtual simulations, has significantly influenced contemporary approaches to preoperative planning in implant dentistry. Through a meticulous analysis of relevant studies, this review synthesizes findings related to accuracy outcomes in implant placement facilitated by 3D imaging in virtual patients. Methods: A comprehensive literature search was conducted across relevant databases to identify relevant studies published to date. The inclusion criteria were studies utilizing 3D imaging techniques, virtual patients, and those focusing on the accuracy of dental implant planning and surgical placement. The selected studies were critically appraised for their methodological quality. Results: After a rigorous analysis, 21 relevant articles were included out of 3021 articles. This study demonstrates the versatility and applicability of these technologies in both in vitro and in vivo settings. Integrating Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), cone bean computed tomography (CBCT), and advanced 3D reconstruction methodologies showcases a trend toward enhanced precision in implant planning and placement. Notably, the evaluation parameters varied, encompassing distances, discrepancies, and deviations in the implant placement. The ongoing integration of systems such as dynamic navigation systems, augmented reality, and sophisticated software platforms shows a promising trajectory for the continued refinement of virtual reality applications in dental implantology, providing valuable insights for future research and clinical implementation. Moreover, using stereolithographic surgical guides, virtual planning with CBCT data, and 3D-printed templates consistently demonstrates enhanced precision in dental implant placement compared to traditional methods. Conclusion: The synthesis of the available evidence underscores the substantial positive impact of 3D imaging techniques and virtual patients on dental implant planning and surgical placement accuracy. Utilizing these technologies contributes to a more personalized and precise approach that enhances overall treatment outcomes. Future research directions and potential refinements to the application of these technologies in clinical practice should be discussed.
RESUMEN
The Exiguobacterium genus comprises Gram-stain-positive and facultatively anaerobic bacteria. Some Exiguobacterium species have previously shown significant high 16S rRNA gene sequence similarities with each other. This study evaluates the taxonomic classification of those Exiguobacterium species through comprehensive genome analysis. Average nucleotide identity (ANI) and digital DNA-DNA hybridization (dDDH) values were determined for various Exiguobacterium species pairs. The ANI and dDDH values between Exiguobacterium enclense and Exiguobacterium indicum, Exiguobacterium aquaticum and Exiguobacterium mexicanum, Exiguobacterium soli and Exiguobacterium antarcticum, and Exiguobacterium sibiricum and Exiguobacterium artemiae were above the cut-off level (95-96% for ANI and 70% for dDDH) for species delineation. Based on the findings, we propose to reclassify Exiguobacterium enclense as a later heterotypic synonym of Exiguobacterium indicum, Exiguobacterium aquaticum as a later heterotypic synonym of Exiguobacterium mexicanum, Exiguobacterium soli as a later heterotypic synonym of Exiguobacterium antarcticum and Exiguobacterium sibiricum as a later heterotypic synonym of Exiguobacterium artemiae.
Asunto(s)
ADN Bacteriano , Exiguobacterium , Genoma Bacteriano , Filogenia , ARN Ribosómico 16S , ARN Ribosómico 16S/genética , ADN Bacteriano/genética , Exiguobacterium/genética , Exiguobacterium/clasificación , Análisis de Secuencia de ADN , Hibridación de Ácido Nucleico , Técnicas de Tipificación BacterianaRESUMEN
PURPOSE: Virtual reality (VR) simulations have been increasingly employed to train dental students prior to clinical practice. According to the literature, blended learning designs in the form of VR simulations can be utilized by both dental students and instructors to provide quality education. They can also save time and improve motor skills before students enter clinical stages. Therefore, this study was designed to review the importance of available VR simulators and their impact on student learning and outcomes. METHOD: The Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines were followed to review the literature systematically, and different databases such as PubMed, ScienceDirect, Cochrane Library, Scopus, and Google Scholar were searched (up to December 2023) for relevant articles using keywords: "virtual reality," "virtual reality simulators," "virtual reality simulation," and "dental education." The Mixed Methods Appraisal Tool was used to assess the study quality. RESULTS: After a comprehensive literature search, 1477 research articles were identified, of which 16 were included in the present study. In terms of students' learning outcomes, engagement, and optimal approach, a significant improvement was observed compared to conventional training methods, specifically in their knowledge, performance, confidence, and psychomotor skills. CONCLUSION: The findings suggest that VR simulators enhance the overall learning abilities of dental students and should be regarded as an integral component of the current curriculum. However, it is important to recognize that VR simulators cannot fully substitute traditional training methods; rather, they can effectively complement them.
RESUMEN
BACKGROUND: Nanoparticles are increasingly used in dentistry for various applications, including enhancing the mechanical properties of denture base resins. This study aimed to comprehensively review and analyze the research landscape of nanoparticles and their effect on the flexural strength of denture base resins to identify key research areas and trends and to highlight the importance of collaboration between authors and institutions. METHODS: A Bibliometric Analysis was conducted using the Keywords "Nanoparticle*" AND "Denture*" OR "CAD/CAM." The literature search from the WOS database was restricted to the publication years 2011 to 2022. RESULTS: Key findings encompass an increase in research publications but a decline in citations. Saudi Arabia, China, and Iraq led this research, with specific institutions excelling. Notable journals with high impact factors were identified. Authorship patterns show variations in citation impact. Additionally, keyword analysis revealed that current research trends offer insights into influential authors and their networks. CONCLUSIONS: The analysis of nanoparticles and denture base resins reveals a dynamic and evolving landscape that emphasizes the importance of collaboration, staying current with research trends, and conducting high-quality research in this ever-evolving domain.
RESUMEN
Background: Estimates suggest that 78,000 children died due to rotavirus gastroenteritis annually between 2011 and 2013 in India. The north eastern state of Assam reported 38.4% pediatric diarrheal admissions testing positive for rotavirus. Rotavirus vaccine (RVV) was introduced in Assam in 2017 following which the National Family Health Survey-5 (NFHS-5) (2019) revealed low RVV coverage in Assam with wide variation between the districts. the current study was conceptualized and undertaken to capture the enablers and barriers to RVV coverage in Assam. Methods: Qualitative study conducted in 5 randomly selected districts in Assam. Participants (key informants) were recruited by purposive sampling at each level of the health system including healthcare officials, service providers and caregivers based on availability. Thirty-five in-depth interviews (IDIs) and five focus group discussions (FGDs) were conducted. Interviews were tape recorded and transcribed. Data was coded and analyzed using the thematic framework approach. Results: Findings from the qualitative data collection were collated and analyzed under 7 identified themes. Difficult terrain, limited service provider availability and no catch-up training for new recruits were some of the barriers to RVV coverage. In contrast, Information, Education & Communication (IEC) in vernacular language, RVV safety profile, development partner support and adequate RVV supply were identified as some of the enablers of RVV coverage. Conclusion: Few broad recommendations to overcome identified barriers include comprehensive inter-sectoral coordination, regular monitoring and frequent refresher training sessions. There is a need for a future study utilizing existing coverage data and larger sample size to triangulate the findings of this study.
RESUMEN
OBJECTIVE: The current body of research on utilizing botulinum toxin (BTX) to manage temporomandibular disorders (TMDs) has not yet yielded definitive conclusions. The primary objective of this study was to determine the effectiveness of BTX in pain reduction for TMDs compared to placebo and other treatments. The secondary outcomes evaluated were adverse events, maximum mouth opening, bruxism events, and maximum occlusal force. MATERIALS AND METHODS: A literature search was performed on PubMed, Dimension Publication, Scopus, and Google Scholar. The RoB 2 tool was used for quality assessment. The mean differences in pain scores were estimated to measure the effect of BTX on pain reduction. For adverse events, the risk ratio for the incidence of side effects was calculated. RESULTS: Two hundred and sixty non-duplicate articles were identified; however, only 14 RCTS were included in this review. The total study population included 395 patients. The overall risk of bias showed a low to moderate quality of evidence. Results from 6 studies were reported only narratively; four studies were used for meta-analysis on pain reduction, and five were used for meta-analysis on adverse events. The control used in the meta-analysis was placebo injections. Results of the meta-analysis for pain reduction were statistically insignificant for the BTX group with mean differences at MD = -1.71 (95% CI, -2.87 to -0.5) at one month, -1.53 (95% CI, -2.80 to -0.27) at three months, and -1.33 (95% CI, -2.74 to 0.77) at six months. This showed that BTX treatment was not significantly better than placebo for a reduction in pain scores at 1, 3, and 6 months. Regarding safety, the placebo group showed a relative risk of 1.34 (95%CI, 0.48-6.78) and 1.17 (95%CI, 0.54-3.88) at 1 and 3 months respectively. However, the risks were not statistically significant. There was also no difference in the effectiveness of BTX compared to placebo and other treatments for maximum mouth opening, bruxism events, and maximum occlusal force. CONCLUSION: BTX was not associated with better outcomes in terms of pain reduction, adverse events, maximum mouth opening, bruxism events, and maximum occlusal force. More high-quality RCTs are needed to better understand this topic.
Asunto(s)
Toxinas Botulínicas , Trastornos de la Articulación Temporomandibular , Humanos , Trastornos de la Articulación Temporomandibular/tratamiento farmacológico , Toxinas Botulínicas/uso terapéutico , Toxinas Botulínicas/efectos adversos , Resultado del Tratamiento , Toxinas Botulínicas Tipo A/uso terapéutico , Toxinas Botulínicas Tipo A/efectos adversosRESUMEN
Arsenic is a natural element found in the earth's crust and is extensively present in various environmental components. Anthropogenic activities and a few natural events have generated contaminants that have led to massive environmental pollution, one form of which is arsenic contamination. Arsenic enters the human food chain via contaminated crops, water, seafood, and dairy products. In Pakistan, the increasing concentration of arsenic in the water is causing major health problems. Due to the serious health risks posed by arsenic, it is crucial to design and implement strategies for reducing and preventing the bioaccumulation of arsenic and its entry into the human food chain. There is a need for an institutional framework for arsenic mitigation, accountability, and systemic checks and balances. Targeted short- and long-term policies are required for effective and sustainable management.
RESUMEN
BACKGROUND: Three-dimensional (3D) printing technology has revolutionized dentistry, particularly in fabricating provisional restorations. This systematic review and meta-analysis aimed to thoroughly evaluate the flexural strength of provisional restorations produced using 3D printing while considering the impact of different resin materials. METHODS: A systematic search was conducted across major databases (ScienceDirect, PubMed, Web of Sciences, Google Scholar, and Scopus) to identify relevant studies published to date. The inclusion criteria included studies evaluating the flexural strength of 3D-printed provisional restorations using different resins. Data extraction and quality assessment were performed using the CONSORT scale, and a meta-analysis was conducted using RevMan 5.4 to pool results. RESULTS: Of the 1914 initially identified research articles, only 13, published between January 2016 and November 2023, were included after screening. Notably, Digital Light Processing (DLP) has emerged as the predominant 3D printing technique, while stereolithography (SLA), Fused Deposition Modeling (FDM), and mono-liquid crystal displays (LCD) have also been recognized. Various printed resins have been utilized in different techniques, including acrylic, composite resins, and methacrylate oligomer-based materials. Regarding flexural strength, polymerization played a pivotal role for resins used in 3D or conventional/milled resins, revealing significant variations in the study. For instance, SLA-3D and DLP Acrylate photopolymers displayed distinct strengths, along with DLP bisacrylic, milled PMMA, and conventional PMMA. The subsequent meta-analysis indicated a significant difference in flexure strength, with a pooled Mean Difference (MD) of - 1.25 (95% CI - 16.98 - 14.47; P < 0.00001) and a high I2 value of 99%, highlighting substantial heterogeneity among the studies. CONCLUSIONS: This study provides a comprehensive overview of the flexural strength of 3D-printed provisional restorations fabricated using different resins. However, further research is recommended to explore additional factors influencing flexural strength and refine the recommendations for enhancing the performance of 3D-printed provisional restorations in clinical applications.
Asunto(s)
Resistencia Flexional , Polimetil Metacrilato , Humanos , Resinas Compuestas , Resinas Acrílicas , Impresión TridimensionalRESUMEN
In this study, a genomic approach was employed to evaluate the metabolic potentials and taxonomic classification of the halophilic genus Halarchaeum. Genomic analysis revealed that Halarchaeum members exhibit a predilection for amino acids as their primary energy source in high-salinity environments over carbohydrates. Genome analysis unveiled the presence of crucial genes associated with metabolic pathways, including the Embden-Meyerhof pathway, semi-phosphorylative Entner-Doudoroff pathway, and the urea cycle. Furthermore, the genomic analysis indicated that Halarchaeum members employ diverse mechanisms for osmotic regulation (encompassing both salt-in and salt-out strategies). Halarchaeum members also encode genes to alleviate acid and heat stress. The average nucleotide identity value between Halarchaeum solikamskense and Halarchaeum nitratireducens exceeded the established threshold (95%-96%) for defining distinct species. This high similarity suggests a close relationship between these two species, prompting the proposal to reclassify Halarchaeum solikamskense as a heterotypic synonym of Halarchaeum nitratireducens. The results of this study contribute to our knowledge of taxonomic classification and shed light on the adaptive strategies employed by Halarchaeum species in their specific ecological niches.
Asunto(s)
Halobacteriaceae , Filogenia , Halobacteriaceae/genética , Glucólisis , Redes y Vías Metabólicas , ARN Ribosómico 16S/genética , Análisis de Secuencia de ADN , ADN BacterianoRESUMEN
BACKGROUND: Sleep bruxism is a prevalent condition in dentistry practice, characterized by involuntary grinding or clenching of the teeth during sleep. Several therapies, including occlusal splints, have been used to manage sleep bruxism and temporomandibular disorders, including occlusal splints. This study aimed to compare the effectiveness of different occlusal splints in managing sleep bruxism. METHODS: The PICO framework encompasses the characterization of the population, intervention, comparison, and pertinent outcomes. A comprehensive and systematic literature review was conducted on PubMed, Scopus, and Google Scholar to identify grey literature. The search specifically targeted scientific studies published before September 20, 2023. The Cochrane Collaboration Risk of Bias Tool assessed the accuracy of the included Randomized Control Trials (RCTs). The modified Newcastle-Ottawa Scale assessed non-randomized studies. Data were systematically extracted, synthesized, and reported thematically. RESULTS: Out of the total of 808 articles that were evaluated, only 15 articles were found to meet the specified inclusion criteria. Adjustable splints, such as full-occlusion biofeedback splints, were more effective in reducing sleep bruxism episodes, improving patient-reported symptoms, and enhancing overall well-being. The impact of different occlusal sprints on electromyographic activity varies, and potential adverse effects should be considered individually. CONCLUSIONS: This review provides valuable insights into the effectiveness of occlusal splints in managing sleep bruxism. The results of this study indicate that occlusal splint therapy is a viable treatment approach for sleep bruxism.
Asunto(s)
Ferulas Oclusales , Bruxismo del Sueño , Humanos , Bruxismo del Sueño/terapia , SueñoRESUMEN
Background Enteral nutrition (EN) represents the preferred modality for nutrient administration in critically ill patients. However, it is fraught with challenges such as delayed initiation and recurrent interruptions, which can significantly impact patient clinical outcomes. A substantial proportion of these interruptions can be mitigated. In the present investigation, our objective was to scrutinize the practice of EN in the Pediatric Intensive Care Unit (PICU). We sought to ascertain the frequency and underlying causes of EN interruptions and assess their ramifications for nutrient delivery. Study design We conducted an observational study within the PICU of Mahatma Gandhi Mission's (MGM) Medical College and Hospital, Aurangabad. The study encompassed children admitted to the PICU for a period exceeding 24 hours who were receiving enteral feeds. We documented the time of commencing EN from the point of PICU admission, instances of enteral feeding interruptions, the number and duration of each interruption episode, and the reasons behind these interruptions. Subsequently, we categorized the causes of feeding interruptions into avoidable and non-avoidable determinants. Results Out of the 100 patients enrolled in this study, only 34% presented with normal nutritional status upon admission. Sixty-five percent of patients had their nutritional support initiated within the first 48 hours of admission to the PICU. The median duration from PICU admission to the initiation of EN was 32.5 hours, with a median interruption duration per patient of 40.96 hours. Common causes of interruptions included radiological procedures, respiratory distress, altered sensorium, presence of gastric aspirates, and surgical procedures. Upon analysis, it was determined that a substantial majority, constituting 74%, of these interruptions were avoidable. Conclusions The primary challenges associated with EN in the PICU encompass delayed initiation of enteral feeds and frequent interruptions. Importantly, a significant proportion of these issues are avoidable.
RESUMEN
Background: Pneumonia is one of the leading causes of death in under-5 children in India. This led the Ministry of Health & Family Welfare (MoHFW) in India to decide for the nationwide roll-out of the Pneumococcal Conjugate Vaccine (PCV). However, the introduction of PCV became more complex in the face of unprecedented challenges set forth by the COVID-19 pandemic. The study aims to assess enablers and barriers to the introduction of PCV in India during the pandemic. Methodology: Qualitative research approach involving key-informant interviews from John Snow India (JSI), the lead technical agency that supported MoHFW in the PCV expansion was employed to delineate the enablers and barriers. Principle of saturation was employed to derive the sample size. Thematic analysis using inductive approach was based on the modified World Health Organization (WHO) framework for new vaccine introduction impact on the Immunization and Health Systems, using NVIVO 12 qualitative data analysis software. Results: A total of 11 key informants (4 national-level program managers and 7 state technical officers) were telephonically interviewed. The study found social acceptance, lower cost of the vaccine, and intensive communication activities as potential enablers. Other enablers for PCV introduction included a robust vaccine supply-chain system, ample cold-chain space availability, and strong political commitment, despite the ongoing second wave. Further, the identified barriers included poor physical access, insufficient social mobilization, and limited advocacy along with a stretched workforce. Conclusion: The study delineated several enablers and barriers to introducing PCV in the country during the pandemic. The existing barriers in the PCV roll-out prompted the need to address these gaps, making key program-based recommendations to improve future new vaccine introductions during the pandemic.
RESUMEN
OBJECTIVE: To develop an automated, physiologic metric of immune effector cell-associated neurotoxicity syndrome among patients undergoing chimeric antigen receptor-T cell therapy. METHODS: We conducted a retrospective observational cohort study from 2016 to 2020 at two tertiary care centers among patients receiving chimeric antigen receptor-T cell therapy with a CD19 or B-cell maturation antigen ligand. We determined the daily neurotoxicity grade for each patient during EEG monitoring via chart review and extracted clinical variables and outcomes from the electronic health records. Using quantitative EEG features, we developed a machine learning model to detect the presence and severity of neurotoxicity, known as the EEG immune effector cell-associated neurotoxicity syndrome score. RESULTS: The EEG immune effector cell-associated neurotoxicity syndrome score significantly correlated with the grade of neurotoxicity with a median Spearman's R2 of 0.69 (95% CI of 0.59-0.77). The mean area under receiving operator curve was greater than 0.85 for each binary discrimination level. The score also showed significant correlations with maximum ferritin (R2 0.24, p = 0.008), minimum platelets (R2 -0.29, p = 0.001), and dexamethasone usage (R2 0.42, p < 0.0001). The score significantly correlated with duration of neurotoxicity (R2 0.31, p < 0.0001). INTERPRETATION: The EEG immune effector cell-associated neurotoxicity syndrome score possesses high criterion, construct, and predictive validity, which substantiates its use as a physiologic method to detect the presence and severity of neurotoxicity among patients undergoing chimeric antigen receptor T-cell therapy.
Asunto(s)
Receptores Quiméricos de Antígenos , Humanos , Estudios Retrospectivos , Proteínas Adaptadoras Transductoras de Señales , ElectroencefalografíaRESUMEN
India had decided to roll out PCV in India in 2015, but successful implementation of any new vaccine introduction mandates an enormous effort. PCV was scaled up during the COVID-19 pandemic, which posed new, unprecedented challenges in the vaccine rollout. However, India successfully expanded PCV in the country in record time across all states and Union Territories. During the pandemic, supply-side restrictions, delayed vaccine shipments, staff shortages, and restrictions in conducting training negatively affected the roll-out of PCV across the country. However, despite the ongoing pandemic, India successfully rolled out PCV across the country in 7 months. In this review, the authors have conducted a narrative review to delineate the crucial factors that helped in the successful expansion of PCV.
RESUMEN
Intensive care units (ICUs) may disrupt sleep. Quantitative ICU studies of concurrent and continuous sound and light levels and timings remain sparse in part due to the lack of ICU equipment that monitors sound and light. Here, we describe sound and light levels across three adult ICUs in a large urban United States tertiary care hospital using a novel sensor. The novel sound and light sensor is composed of a Gravity Sound Level Meter for sound level measurements and an Adafruit TSL2561 digital luminosity sensor for light levels. Sound and light levels were continuously monitored in the room of 136 patients (mean age = 67.0 (8.7) years, 44.9% female) enrolled in the Investigation of Sleep in the Intensive Care Unit study (ICU-SLEEP; Clinicaltrials.gov: #NCT03355053), at the Massachusetts General Hospital. The hours of available sound and light data ranged from 24.0 to 72.2 hours. Average sound and light levels oscillated throughout the day and night. On average, the loudest hour was 17:00 and the quietest hour was 02:00. Average light levels were brightest at 09:00 and dimmest at 04:00. For all participants, average nightly sound levels exceeded the WHO guideline of < 35 decibels. Similarly, mean nightly light levels varied across participants (minimum: 1.00 lux, maximum: 577.05 lux). Sound and light events were more frequent between 08:00 and 20:00 than between 20:00 and 08:00 and were largely similar on weekdays and weekend days. Peaks in distinct alarm frequencies (Alarm 1) occurred at 01:00, 06:00, and at 20:00. Alarms at other frequencies (Alarm 2) were relatively consistent throughout the day and night, with a small peak at 20:00. In conclusion, we present a sound and light data collection method and results from a cohort of critically ill patients, demonstrating excess sound and light levels across multiple ICUs in a large tertiary care hospital in the United States. ClinicalTrials.gov, #NCT03355053. Registered 28 November 2017, https://clinicaltrials.gov/ct2/show/NCT03355053.