X-ray diagnostics of ECR ion sources-Techniques, results, and challenges.

The high magnetic confinement provided by the minimum-B structure of electron cyclotron resonance ion sources (ECRIS) hosts a non-equilibrium plasma, composed of cold multi-charged ions and hot electrons whose energy can expand up to ≈1 MeV. With a very limited accessibility, the ECR plasma is difficult to study. The x-ray photons generated by the interaction of the warm and hot electron populations within the plasma, as well as the photons generated by electrons lost to the chamber wall, are a signal of great interest as it gives an insight to the properties of the ECR plasma. After an introduction presenting the mechanism generating the x rays in ECRIS, this Review presents the methodology to measure x rays both for volumetric measurements and plasma imaging. The main insights of those measurements are presented. Prospects of x-ray measurements to better understand the plasma dynamics are finally highlighted.

Importance of bicarbonate transport in pH control during amelogenesis - need for functional studies.

Dental enamel, the hardest mammalian tissue, is produced by ameloblasts. Ameloblasts show many similarities to other transporting epithelia although their secretory product, the enamel matrix, is quite different. Ameloblasts direct the formation of hydroxyapatite crystals, which liberate large quantities of protons that then need to be buffered to allow mineralization to proceed. Buffering requires a tight pH regulation and secretion of bicarbonate by ameloblasts. Many investigations have used immunohistochemical and knockout studies to determine the effects of these genes on enamel formation, but up till recently very little functional data were available for mineral ion transport. To address this, we developed a novel 2D in vitro model using HAT-7 ameloblast cells. HAT-7 cells can be polarized and develop functional tight junctions. Furthermore, they are able to accumulate bicarbonate ions from the basolateral to the apical fluid spaces. We propose that in the future, the HAT-7 2D system along with similar cellular models will be useful to functionally model ion transport processes during amelogenesis. Additionally, we also suggest that similar approaches will allow a better understanding of the regulation of the cycling process in maturation-stage ameloblasts, and the pH sensory mechanisms, which are required to develop sound, healthy enamel.

Two-chamber configuration of Bio-Nano electron cyclotron resonance ion source for fullerene modification.

We report on the modification of fullerenes with iron and chlorine using two individually controllable plasmas in the Bio-Nano electron cyclotron resonance ion source (ECRIS). One of the plasmas is composed of fullerene and the other one is composed of iron and chlorine. The online ion beam analysis allows one to investigate the rate of the vapor-phase collisional modification process in the ECRIS, while the offline analyses (e.g., liquid chromatography-mass spectrometry) of the materials deposited on the plasma chamber can give information on the surface-type process. Both analytical methods show the presence of modified fullerenes such as fullerene-chlorine, fullerene-iron, and fullerene-chlorine-iron.

Ion beam emittance from an ECRIS.

Simulation of ion beam extraction from an Electron Cyclotron Resonance Ion Source (ECRIS) is a fully 3 dimensional problem, even if the extraction geometry has cylindrical symmetry. Because of the strong magnetic flux density, not only the electrons are magnetized but also the Larmor radius of ions is much smaller than the geometrical dimension of the plasma chamber (Ø 64 × 179 mm). If we assume that the influence of collisions is small on the path of particles, we can do particle tracking through the plasma if the initial coordinates of particles are known. We generated starting coordinates of plasma ions by simulation of the plasma electrons, accelerated stochastically by the 14.5 GHz radio frequency power fed to the plasma. With that we were able to investigate the influence of different electron energies on the extracted beam. Using these assumptions, we can reproduce the experimental results obtained 10 years ago, where we monitored the beam profile with the help of viewing targets. Additionally, methods have been developed to investigate arbitrary 2D cuts of the 6D phase space. To this date, we are able to discuss full 4D information. Currently, we extend our analysis tool towards 5D and 6D, respectively.

X-ray pinhole camera setups used in the Atomki ECR Laboratory for plasma diagnostics.

Imaging of the electron cyclotron resonance (ECR) plasmas by using CCD camera in combination with a pinhole is a non-destructive diagnostics method to record the strongly inhomogeneous spatial density distribution of the X-ray emitted by the plasma and by the chamber walls. This method can provide information on the location of the collisions between warm electrons and multiple charged ions/atoms, opening the possibility to investigate the direct effect of the ion source tuning parameters to the plasma structure. The first successful experiment with a pinhole X-ray camera was carried out in the Atomki ECR Laboratory more than 10 years ago. The goal of that experiment was to make the first ECR X-ray photos and to carry out simple studies on the effect of some setting parameters (magnetic field, extraction, disc voltage, gas mixing, etc.). Recently, intensive efforts were taken to investigate now the effect of different RF resonant modes to the plasma structure. Comparing to the 2002 experiment, this campaign used wider instrumental stock: CCD camera with a lead pinhole was placed at the injection side allowing X-ray imaging and beam extraction simultaneously. Additionally, Silicon Drift Detector (SDD) and High Purity Germanium (HPGe) detectors were installed to characterize the volumetric X-ray emission rate caused by the warm and hot electron domains. In this paper, detailed comparison study on the two X-ray camera and detector setups and also on the technical and scientific goals of the experiments is presented.

Recent developments of ion sources for life-science studies at the Heavy Ion Medical Accelerator in Chiba (invited).

With about 1000-h of relativistic high-energy ion beams provided by Heavy Ion Medical Accelerator in Chiba, about 70 users are performing various biology experiments every year. A rich variety of ion species from hydrogen to xenon ions with a dose rate of several Gy/min is available. Carbon, iron, silicon, helium, neon, argon, hydrogen, and oxygen ions were utilized between 2012 and 2014. Presently, three electron cyclotron resonance ion sources (ECRISs) and one Penning ion source are available. Especially, the two frequency heating techniques have improved the performance of an 18 GHz ECRIS. The results have satisfied most requirements for life-science studies. In addition, this improved performance has realized a feasible solution for similar biology experiments with a hospital-specified accelerator complex.

Evidence for Bicarbonate Secretion by Ameloblasts in a Novel Cellular Model.

Formation and growth of hydroxyapatite crystals during amelogenesis generate a large number of protons that must be neutralized, presumably by HCO3 (-)ions transported from ameloblasts into the developing enamel matrix. Ameloblasts express a number of transporters and channels known to be involved in HCO3 (-)transport in other epithelia. However, to date, there is no functional evidence for HCO3 (-)transport in these cells. To address questions related to HCO3 (-)export from ameloblasts, we have developed a polarized 2-dimensional culture system for HAT-7 cells, a rat cell line of ameloblast origin. HAT-7 cells were seeded onto Transwell permeable filters. Transepithelial resistance was measured as a function of time, and the expression of transporters and tight junction proteins was investigated by conventional and quantitative reverse transcription polymerase chain reaction. Intracellular pH regulation and HCO3 (-)transport were assessed by microfluorometry. HAT-7 cells formed epithelial layers with measureable transepithelial resistance on Transwell permeable supports and expressed claudin-1, claudin-4, and claudin-8-key proteins for tight junction formation. Transport proteins previously described in maturation ameloblasts were also present in HAT-7 cells. Microfluorometry showed that the HAT-7 cells were polarized with a high apical membrane CO2 permeability and vigorous basolateral HCO3 (-)uptake, which was sensitive to Na(+)withdrawal, to the carbonic anhydrase inhibitor acetazolamide and to H2DIDS inhibition. Measurements of transepithelial HCO3 (-)transport showed a marked increase in response to Ca(2+)- and cAMP-mobilizing stimuli. Collectively, 2-dimensional HAT-7 cell cultures on permeable supports 1) form tight junctions, 2) express typical tight junction proteins and electrolyte transporters, 3) are functionally polarized, and 4) can accumulate HCO3 (-)ions from the basolateral side and secrete them at the apical membrane. These studies provide evidence for a regulated, vectorial, basolateral-to-apical bicarbonate transport in polarized HAT-7 cells. We therefore propose that the HAT-7 cell line is a useful functional model for studying electrolyte transport by ameloblasts.

Fast camera studies at an electron cyclotron resonance table plasma generator.

A simple table-size ECR plasma generator operates in the ATOMKI without axial magnetic trap and without any particle extraction tool. Radial plasma confinement is ensured by a NdFeB hexapole. The table-top ECR is a simplified version of the 14 GHz ATOMKI-ECRIS. Plasma diagnostics experiments are planned to be performed at this device before installing the measurement setting at the "big" ECRIS. Recently, the plasma generator has been operated in pulsed RF mode in order to investigate the time evolution of the ECR plasma in two different ways. (1) The visible light radiation emitted by the plasma was investigated by the frames of a fast camera images with 1 ms temporal resolution. Since the visible light photographs are in strong correlation with the two-dimensional spatial distribution of the cold electron components of the plasma it can be important to understand better the transient processes just after the breakdown and just after the glow. (2) The time-resolved ion current on a specially shaped electrode was measured simultaneously in order to compare it with the visible light photographs. The response of the plasma was detected by changing some external setting parameters (gas pressure and microwave power) and was described in this paper.

Experiments with biased side electrodes in electron cyclotron resonance ion sources.

The output of highly charged ions from an electron cyclotron resonance ion source (ECRIS) consists of ionic losses from a highly confined plasma. Therefore, an increase of the output of the ions of interest always is a compromise between an increase in the confinement and an increase of the losses. One route towards a solution consists of attacking the losses in directions - i.e., radial directions - that do not contribute to the required output. This was demonstrated in an experiment (using the Kei ECRIS at NIRS, Japan) where radial losses were electrostatically reduced by positively biasing one set of six "side" electrodes surrounding the plasma in side-ward directions attached (insulated) to the cylindrical wall of the plasma chamber. Recently new studies were performed in two laboratories using two essentially different ion sources. At the BioNano ECRIS (Toyo University, Japan) various sets of electrodes were used; each of the electrodes could be biased individually. At the Atomki ECRIS (Hungary), one movable, off-axis side electrode was applied in technically two versions. The measurements show indeed a decrease of ionic losses but different effectivities as compared to the biased disk.

Two-frequency heating technique at the 18 GHz electron cyclotron resonance ion source of the National Institute of Radiological Sciences.

The two-frequency heating technique was studied to increase the beam intensities of highly charged ions provided by the high-voltage extraction configuration (HEC) ion source at the National Institute of Radiological Sciences (NIRS). The observed dependences on microwave power and frequency suggested that this technique improved plasma stability but it required precise frequency tuning and more microwave power than was available before 2013. Recently, a new, high-power (1200 W) wide band-width (17.1-18.5 GHz) travelling-wave-tube amplifier (TWTA) was installed. After some single tests with klystron and TWT amplifiers the simultaneous injection of the two microwaves has been successfully realized. The dependence of highly charged ions (HCI) currents on the superposed microwave power was studied by changing only the output power of one of the two amplifiers, alternatively. While operating the klystron on its fixed 18.0 GHz, the frequency of the TWTA was swept within its full limits (17.1-18.5 GHz), and the effect of this frequency on the HCI-production rate was examined under several operation conditions. As an overall result, new beam records of highly charged argon, krypton, and xenon beams were obtained at the NIRS-HEC ion source by this high-power two-frequency operation mode.

Fullerene-rare gas mixed plasmas in an electron cyclotron resonance ion source.

A synthesis technology of endohedral fullerenes such as Fe@C60 has developed with an electron cyclotron resonance (ECR) ion source. The production of N@C60 was reported. However, the yield was quite low, since most fullerene molecules were broken in the ECR plasma. We have adopted gas-mixing techniques in order to cool the plasma and then reduce fullerene dissociation. Mass spectra of ion beams extracted from fullerene-He, Ar or Xe mixed plasmas were observed with a Faraday cup. From the results, the He gas mixing technique is effective against fullerene destruction.

Synthesis of endohedral iron-fullerenes by ion implantation.

In this paper, we discuss the results of our study of the synthesis of endohedral iron-fullerenes. A low energy Fe(+) ion beam was irradiated to C60 thin film by using a deceleration system. Fe(+)-irradiated C60 thin film was analyzed by high performance liquid chromatography and laser desorption/ ionization time-of-flight mass spectrometry. We investigated the performance of the deceleration system for using a Fe(+) beam with low energy. In addition, we attempted to isolate the synthesized material from a Fe(+)-irradiated C60 thin film by high performance liquid chromatography.

Status of the Bio-Nano electron cyclotron resonance ion source at Toyo University.

In the paper, the material science experiments, carried out recently using the Bio-Nano electron cyclotron resonance ion source (ECRIS) at Toyo University, are reported. We have investigated several methods to synthesize endohedral C60 using ion-ion and ion-molecule collision reaction in the ECRIS. Because of the simplicity of the configuration, we can install a large choice of additional equipment in the ECRIS. The Bio-Nano ECRIS is suitable not only to test the materials production but also to test technical developments to improve or understand the performance of an ECRIS.

Chronic hibernating myocardium in sheep can occur without degenerating events and is reversed after revascularization.

INTRODUCTION: Our goal was to show that blunting of myocardial flow reserve is mainly involved in adaptive chronic myocardial hibernation without apparent cardiomyocyte degeneration. METHODS AND RESULTS: Sheep chronically instrumented with critical multivessel stenosis and/or percutaneous transluminal coronary angioplasty (PTCA)-induced revascularization were allowed to run and feed in the open for 2 and 5 months, respectively. Regional myocardial blood flow (MBF) with colored microspheres, regional and global left ventricular function and dimensions (2D echocardiography), and myocardial structure were studied. In sheep with a critical stenosis, a progressive increase in left ventricular end-diastolic and end-systolic cavity area and a decrease in fractional area change were found. Fraction of wall thickness decreased in all left ventricular wall segments. MBF was slightly but not significantly decreased at rest at 2 months. Morphological quantification revealed a rather small but significant increase in diffusely distributed connective tissue, cardiomyocyte hypertrophy, and presence of viable myocardium of which almost 30 % of the myocytes showed depletion of sarcomeres and accumulation of glycogen. The extent of myolysis in the transmural layer correlated with the degree of left ventricular dilation. Structural degeneration of cardiomyocytes was not observed. Balloon dilatation (PTCA) of one of the coronary artery stenoses at 10 weeks revealed recovery of fraction of wall thickness and near normalization of global subcellular structure at 20 weeks. CONCLUSION: These data indicate that chronic reduction of coronary reserve by itself can induce ischemic cardiomyopathy characterized by left ventricular dilatation, depressed regional and global function, adaptive chronic myocardial hibernation, reactive fibrosis and cardiomyocyte hypertrophy in the absence of obvious degenerative phenomena. SUMMARY: Reduction of myocardial flow reserve due to chronic coronary artery stenosis in sheep induces adaptive myocardial hibernation without involvement of degenerative phenomena.

Effect of pulse-modulated microwaves on fullerene ion production with electron cyclotron resonance ion source.

Fullerene plasmas generated by pulse-modulated microwaves have been investigated under typical conditions at the Bio-Nano electron cyclotron resonance ion source. The effect of the pulse modulation is distinct from that of simply structured gases, and then the density of the fullerene plasmas increased as decreasing the duty ratio. The density for a pulse width of 10 µs at the period of 100 µs is 1.34 times higher than that for CW mode. We have studied the responses of fullerene and argon plasmas to pulsed microwaves. After the turnoff of microwave power, fullerene plasmas lasted ∼30 times longer than argon plasmas.

Molecular and negative ion production by a standard electron cyclotron resonance ion source.

Molecular and negative ion beams, usually produced in special ion sources, play an increasingly important role in fundamental and applied atomic physics. The ATOMKI-ECRIS is a standard ECR ion source, designed to provide highly charged ion (HCI) plasmas and beams. In the present work, H(-), O(-), OH(-), O(2)(-), C(-), C(60)(-) negative ions and H(2)(+), H(3)(+), OH(+), H(2)O(+), H(3)O(+), O(2)(+) positive molecular ions were generated in this HCI-ECRIS. Without any major modification in the source and without any commonly applied tricks (such as usage of cesium or magnetic filter), negative ion beams of several µA and positive molecular ion beams in the mA range were successfully obtained.

Status and special features of the Atomki ECR ion source.

The ECR ion source has been operating in ATOMKI (Debrecen) since 1996. During the past 15 years lots of minor and numerous major technical modifications have been carried out on the ECRIS. Many of these changes aimed the increasing of beams charge, intensity, and the widening of the ion choice. Another group of the modifications were performed to develop special, non-standard operation modes or to produce peculiar plasmas and beams.

Study on the beam transport from the Bio-Nano ECRIS.

The beam transport of N(+) ion and C(60)(+) ion in the Bio-Nano ECRIS with min-B configuration was investigated based on the ion beam profiles. The N(+) beam could be focused under the low-beam current conditions. Also the C(60)(+) beam could be focused in spite of the large space-charge effect which will lead the divergence of the beam. We confirmed that our beam transport system works well even for the C(60)(+) ion beam. We estimated the highest C(60)(+) beam current with the focused beam profile by comparing the N(+) ion beam.

Electron cyclotron resonance plasma photos.

In order to observe and study systematically the plasma of electron cyclotron resonance (ECR) ion sources (ECRIS) we made a high number of high-resolution visible light plasma photos and movies in the ATOMKI ECRIS Laboratory. This required building the ECR ion source into an open ECR plasma device, temporarily. An 8MP digital camera was used to record photos of plasmas made from Ne, Ar, and Kr gases and from their mixtures. We studied and recorded the effect of ion source setting parameters (gas pressure, gas composition, magnetic field, and microwave power) to the shape, color, and structure of the plasma. The analysis of the photo series gave us many qualitative and numerous valuable physical information on the nature of ECR plasmas.

Calcification and degeneration characteristics of the Biocor no-react bovine internal mammary artery (BIMA) - in vivo evaluation in a sheep model.

OBJECTIVE: The No-React process for biomaterials was suggested to prevent calcification and degeneration. We examined in vivo in a chronic sheep model the performance of a Biocor bovine internal mammary artery (BIMA) graft after No-React processing. METHODS: 'No-React' processing consists of aldehyde cross-linkage following a detoxification process with multiple physical variables and incubation with surfactant. Biocor BIMA No-React treated grafts have been interposed in the carotid artery in seven sheep with a Dacron graft as control. Grafts were explanted after 3 or 6months and were grossly examined, by X-ray, histology, transmission and scanning electron microscopy, and atomic absorption spectrophotometry. RESULTS: In the BIMA, good healing was found with a smooth intimal surface, minimal inflammatory reaction, and a well preserved ultrastructure. Calcification increased progressively. In the Dacron grafts, a fibrous covering the inner surface and infiltration with fibroblasts, histiocytes and macrophages was noted. Calcium content was stable. CONCLUSION: Calcification increased progressively in Biocor BIMA No-React grafts. Minimal inflammatory changes, a smooth inner surface and well preserved ultrastructure were noted.