The Influence of Micronization on the Properties of Black Cumin Pressing Waste Material.

The purpose of this study was to investigate the effect of micronization on the characteristics of black cumin pressing waste material. The basic composition, amino acid, and fatty acid content of the raw material-specifically, black cumin pressing waste material-were determined. The samples were micronized in a planetary ball mill for periods ranging from 0 to 20 min. The particle sizes of micronized samples of black cumin pressing waste material were then examined using a laser analyzer, the Mastersizer 3000. The structures of the produced micronized powders was examined by X-ray diffraction. Additionally, the FTIR (Fourier-transform infrared) spectra of the micronized samples were recorded. The measurement of phenolic and antiradical properties was conducted both before and after in vitro digestion, and the evaluation of protein digestibility and trypsin inhibition was also conducted. The test results, including material properties, suggest that micronization for 10 min dramatically reduced particle diameters (d50) from 374.7 to 88.7 µm, whereas after 20 min, d50 decreased to only 64.5 µm. The results obtained using FTIR spectroscopy revealed alterations, especially in terms of intensity and, to a lesser extent, the shapes of the bands, indicating a significant impact on the molecular properties of the tested samples. X-ray diffraction profiles revealed that the internal structures of all powders are amorphous, and micronization methods have no effect on the internal structures of powders derived from black cumin pressing waste. Biochemical analyses revealed the viability of utilizing micronized powders from black cumin pressing waste materials as beneficial food additives, since micronization increased total phenolic extraction and antiradical activity.

Frictional Properties of Soaps with the Addition of Ground Hazelnut Shells.

The search for new technologies and related new biological materials for use in the cosmetics industry requires many studies and analyses of not only chemical but also physical properties. This study attempts to assess the properties of soap produced with the addition of crushed hazelnut shells. This additive is intended to improve the friction properties of the soap, which in turn enhances the quality of removing impurities from the skin. Friction tests for wet and dry skin were performed on an appropriately designed measuring station using the Texture Analyser XT plus device. The obtained results indicate an increase in dynamic friction value compared to the control sample. This work proposes an unconventional use of ground hazelnut shells as one of the additives in soap production to improve its quality.

Evaluation of physical parameters and spectral characterization of the quality of soaps containing by-products from the food industry.

The present study investigated several properties such as friction, hardness, penetration work, and cutting forces in soaps formulated with apple and carrot pomace at varying concentrations of 5%, 10%, and 15%. To gain insights into the molecular-level alterations within the formulated soap samples, they were spectroscopically analyzed using Fourier-transform infrared spectroscopy. The sliding friction analyses revealed that the investigated extrudate additives had no significant impact on the frictional forces of the soaps. However, notable differences were observed in the cutting force, hardness, and penetration work between the control and pomace-added samples. Excluding the control samples, no statistically significant distinctions were found between the cutting force, hardness, and work of penetration of soaps containing apple pomace and carrot pomace. Moreover, the quantity of pomace incorporated did not induce any significant variations in the results. The obtained samples were characterised at the molecular level using FTIR Fourier transform infrared spectroscopy. On the other hand, alterations in band intensities suggested improved molecular packing of the compounds within the samples due to the presence of the additives.

Common Wheat Pasta Enriched with Ultrafine Ground Oat Husk: Physicochemical and Sensory Properties.

Oat husk (hull) is a byproduct of oat processing that is rich in insoluble fiber. The aim of the study was to evaluate the effect of partially replacing wheat flour with oat husk (at levels of 0, 5, 10, 15, and 20 g/100 g) on the physicochemical properties and sensory acceptance of pasta. Additionally, UPLC-MS/MS analysis was performed to identify phenolic acids and flavonoid compounds, and the cooking properties of the pasta were evaluated. The test results indicate that oat husk significantly (p < 0.05) increased the ash and fiber contents in the pasta, while decreasing the protein and fat contents. Moreover, the redness and yellowness of both raw and cooked pasta increased, while lightness decreased as a result of pasta enrichment with oat husk. Oat husk also led to a decrease in the stretching force of cooked samples, although cooking loss increased significantly but did not exceed 8%. The contents of phenolics and antioxidant activity significantly increased with the incorporation of hull in pasta recipes. UPLC-MS/MS analysis showed that the enriched pasta was especially abundant in ferulic acid. Products with up to 10 g of husk/100 g of wheat flour showed good consumer acceptance. However, higher levels of this additive led to notably lower assessments, particularly in terms of pasta texture.

Influence of Soluble Fiber as a Carrier on Antioxidant and Physical Properties of Powders Produced Based on the Spray Drying of Malvae arboreae flos Aqueous Extracts.

The objective of this study was to assess the impact of inulin and pectin, wherein pectin replaced inulin with weight ranging from 2% to 8%, as wall materials on various aspects: bioactive component content, antioxidant and anti-inflammatory properties, bioavailability, powder recovery during the drying process, and selected physical characteristics of powders derived from Malvae arboreae flos aqueous extracts obtained through spray drying. Powders containing a soluble fraction of fiber demonstrated a recovery efficiency of over 50% during drying, along with low moisture content, water activity, and hygroscopicity, coupled with high solubility. The incorporation of pectin up to 8% did not significantly alter the color profile of the powders. However, at levels of 4% to 8% pectin, concave distortions and particle morphology cracks became noticeable, along with the potential to form agglomerates (evident when the span index ranged between 5.11 and 14.51). The substitution of inulin with pectin led to higher total contents of flavonoids (from 1.31% to 49.57% before digestion, and from 18.92% to 36.48% after digestion) and anthocyanins (from 45.79% to 78.56% before digestion, and from 65.45% to 521.81% after digestion) compared to samples containing only inulin as a carrier. Bioacceptability values exceeding 100% indicated effective preservation of compounds responsible for ferric-reducing antioxidant power, as well as the inhibition of xanthine oxidase and cyclooxygenase-2 across all samples.

Fresh Chokeberry (Aronia melanocarpa) Fruits as Valuable Additive in Extruded Snack Pellets: Selected Nutritional and Physiochemical Properties.

In this paper, the nutritional value and (selected) physiochemical properties of extruded snack pellets enriched with fresh chokeberry (Aronia melanocarpa) fruits were analyzed from the perspective of being a new product for the functional food sector. The purpose of this study was to determine the effect of the addition of fresh chokeberry and variation in content and screw speed on extruded snack pellet basic compositions, fatty acid profiles, antioxidant activity, as well as water absorption and solubility indexes, fat absorption and color profiles. The obtained results revealed a significant increase in antioxidant activity for all samples (above 90% of free radical scavenging) in comparison to potato-based control samples (just over 20% of free radical scavenging). The total phenolic content assay revealed the most valuable results for samples enriched with 30% chokeberry, while Ultra Performance Liquid Chromatography (UPLC) analysis allowed the determination of the most important phenolic acids. Of interest, chokeberry addition decreased the fat absorption index (FAI) after expansion by frying. Moreover, the highest values of crude protein and crude ash were observed in snack pellets supplemented by the application of 30% chokeberry. In such samples, the crude protein content was at the level of 4.75-4.87 g 100 g-1 and crude ash content at 4.88-5.07 g 100 g-1. Moreover, saturated fatty acids (SFA) content was lower in snack pellets with chokeberry addition, and increasing the amount of chokeberry additive from 10% to 30% in extruded snack pellet recipes resulted in more than double an increase in polyunsaturated fatty acids (PUFA) proportion in the total fatty acids.

New Coagulant Proteases for Cheesemaking from Leaves and Latex of the Spontaneous Plant Pergularia tomentosa: Biochemical Characterization of Coagulants and Sensorial Evaluation of Cheese.

The purpose of this study was to evaluate the caseinolytic and milk-clotting activities of aqueous crude extracts from leaves and latex of the Pergularia tomentosa, to determine their suitability as a rennet substitute. These extracts were subjected to a series of biochemical tests before being used in the production of cheese. The results showed that the enzymatic latex extract had a higher coagulant activity than the leaf extract. However, under different clotting conditions (pH, temperature, and CaCl2 concentration), both coagulants behaved similarly in the coagulation of Berridge substrate. The SDS-PAGE and zymographic analysis revealed identical protein bands with a single active zone in both extracts, corresponding to a molecular weight of 26.98 kDa and 26.03 kDa in the extract of leaf and latex, respectively. Both extracts were stable to different effectors but strongly inhibited by iodoacetamide and Hg, suggesting it to be a cysteine protease. Both extracts were able to hydrolyze casein and generate peptides of 14 kDa, with excessive hydrolysis of the other casein fractions. The physicochemical parameters of cheese made from latex and leaf extract evolved similarly to control cheese. According to the sensory evaluation, cheese made with latex had a mildly bitter flavor but showed a high acceptance rate (>80%).

Innovative high-fiber wheat bread fortified with micronized oat and Plantago ovata husks: Spectroscopic and physicochemical characteristics.

Micronized oat husk and Plantago ovata husk were used as dietary fiber sources in wheat bread. The addition of 20% micronized oat husk improved dough yield but resulted in a darker bread crumb, decreased loaf volume, and deteriorated texture. In contrast, 5% P. ovata husk enhanced the springiness and cohesiveness of the crumb, as confirmed by rapid visco-analysis of pasting properties and Fourier-transform infrared spectra. The improvement was ascribed to increased interaction via hydrogen or glycosidic bonds. Bread enriched with 10% micronized oat husk and 5% P. ovata husk contained 9.2 g/100 g FW of fiber (a 5-fold increase), 7.1 g/100 g FW of protein (a decrease of 21%), 40.1 g/100 g FW of carbohydrates (a decrease of 21.6%), and had a calorific value of 212 kcal/100 g FW (a decrease of 22%). In vitro, analysis showed higher starch digestibility for the bread. Furthermore, both P. ovata husk and micronized oat husk improved the antioxidant properties of potentially bioaccessible fractions, particularly the ability to quench hydroxyl radicals, which was 2.7-fold higher in the bread with the highest contribution of micronized oat husk.

Nutritional Characteristics of New Generation Extruded Snack Pellets with Edible Cricket Flour Processed at Various Extrusion Conditions.

As new sources of proteins, edible insects may be excellent additives in a new generation of environmentally friendly food products that are nutritionally valuable, safe, sustainable, and are needed in today's world. The aim of this study was to determine the effect of the application of cricket flour on extruded wheat-corn-based snack pellets' basic composition, fatty acids profile, nutritional value, antioxidant activity and selected physicochemical properties. Results showed that the application of cricket flour had a significant impact on the composition and properties of snack pellets based on wheat-corn blends. In newly developed products, the enhanced level of protein and almost triple increase in crude fiber was found as an insect flour supplementation reached 30% level in the recipe. The level of cricket flour and the applied processing conditions (various moisture contents and screw speeds) significantly affect the water absorption and water solubility index and texture and color profile. Results revealed that cricket flour application significantly increased the total polyphenols content in the assessed samples in comparison to plain wheat-corn bases. Antioxidant activity was also noted to be elevated with increasing cricket flour content. These new types of snack pellets with cricket flour addition may be interesting products with high nutritional value and pro-health properties.

Micronized Powder of Raspberry Pomace as a Source of Bioactive Compounds.

Red raspberries, which contain a variety of nutrients and phytochemicals that are beneficial for human health, can be utilized as a raw material in the creation of several supplements. This research suggests micronized powder of raspberry pomace production. The molecular characteristics (FTIR), sugar, and biological potential (phenolic compounds and antioxidant activity) of micronized raspberry powders were investigated. FTIR spectroscopy results revealed spectral changes in the ranges with maxima at ~1720, 1635, and 1326, as well as intensity changes in practically the entire spectral range analyzed. The discrepancies clearly indicate that the micronization of the raspberry byproduct samples cleaved the intramolecular hydrogen bonds in the polysaccharides present in the samples, thus increasing the respective content of simple saccharides. In comparison to the control powders, more glucose and fructose were recovered from the micronized samples of the raspberry powders. The study's micronized powders were found to contain nine different types of phenolic compounds, including rutin, elagic acid derivatives, cyanidin-3-sophoroside, cyanidin-3-(2-glucosylrutinoside), cyanidin-3-rutinoside, pelargonidin-3-rutinoside, and elagic acid derivatives. Significantly higher concentrations of ellagic acid and ellagic acid derivatives and rutin were found in the micronized samples than in the control sample. The antioxidant potential assessed by ABTS and FRAP significantly increased following the micronization procedure.

Special Issue: Research and Application of Food By-Products.

Recently, there has been an increase in interest in reusing food processing by-products [...].

Effects of Wet and Dry Micronization on the GC-MS Identification of the Phenolic Compounds and Antioxidant Properties of Freeze-Dried Spinach Leaves and Stems.

Micronization is an emerging technology used in food production, in which the size of particles is reduced to microns in the processing of plant raw materials and by-products, thus making it an interesting research topic. Spinach stems are by-products of spinach leaf processing, but there is little information regarding their processing and possible reuse. In this study, wet and dry ball mill micronization, in combination with freeze drying, was used to process spinach stems and leaves to obtain functional powders. The color and particle size of the micronized spinach leaf and stem powders were evaluated. The antioxidant activity (AA) of the powders and phenolic compounds present in them were determined using GC-MS analysis. The results obtained showed that the dry micronization of leaves and stems resulted in smoother and brighter powders than wet micronization. Significantly smaller particle sizes were achieved using the dry micronization of the leaves and stems (Dv50 = 19.5 and 10.1 µm, respectively) rather than wet micronization (Dv50 = 84.6 and 112.5 µm, respectively). More phenolic compounds, such as o-coumaric acid and gallic acid, were extracted from the dry-micronized powders. The dry micronization of the stems significantly increased the total phenolic content, and the AA of these powders was also increased. These findings demonstrate that spinach leaves and stems subjected to dry micronization can be valuable functional components of food.

Pilot study on the use of cold atmospheric plasma for preservation of bread.

Cold atmospheric plasma (CAP) is used as an emerging technology for food preservation. In this study, CAP treatment has been applied to bakery products for the first time. The aim of the work was to investigate the effect of the use of CAP on the amount of microorganisms during bread storage. Basic physicochemical properties and bread texture were determined during storage for 0, 3, and 6 days. The study material included gluten-free and mixed wheat-rye bread treated with CAP for 2 and 10 min. The results showed that no mesophilic bacteria or fungi were found after ten minutes of the bread exposure to CAP. In addition, only 2-min non-thermal sterilization resulted in complete inhibition of yeast and mould growth in the gluten-free and wheat-rye bread. A decrease in the microbial growth in the bread was noted; however, a simultaneous decrease in the moisture content of the bread was observed. After the application of plasma for 2 or 10 min, both the gluten-free and mixed wheat-rye bread was characterized by reduced humidity, which also resulted in a significant increase in the hardness and a slight increase in the springiness of the bread. The use of CAP in storage of bread is promising; nevertheless, it is necessary to further study the effect of this treatment in bread with improvers, especially with hydrocolloids and fibers.

Microencapsulated Red Powders from Cornflower Extract-Spectral (FT-IR and FT-Raman) and Antioxidant Characteristics.

Although the health benefits of cornflower extracts are known, their application in food production has not been widely investigated. This study assessed microencapsulated red powders (RP) prepared from the aqueous extract of blue cornflower petals. Microencapsulation was performed by freeze-drying using various stabilizers, such as maltodextrin, guar gum, and lecithin. The microencapsulated RP were characterized by spectral (FT-IR and FT-Raman), mineral, structural, and antioxidant analyses. The FT-IR and FT-Raman band related to guar gum, lecithin, and maltodextrin dominated over the band characteristic of anthocyanins present in the cornflower petal powders. The main difference observed in the FT-Raman spectra was attributed to a shift of bands which is reflection of appearance of flavium cation forms of anthocyanins. The microencapsulated RP had total phenolic content of 21.6-23.4 mg GAE/g DW and total flavonoid content of 5.0-5.23 mg QE/g. The ABTS radical scavenging activity of the tested powders ranged from 13.8 to 20.2 EC50 mg DW/mL. The reducing antioxidant power (RED) of the powders was estimated at between 31.0 and 38.7 EC50 mg DW/mL, and OH• scavenging activity ranged from 1.9 to 2.6 EC50 mg DW/mL. Microencapsulated cornflower RP can be valuable additives to food such as sweets, jellies, puddings, drinks, or dietary supplements.

Fiber Preparation from Micronized Oat By-Products: Antioxidant Properties and Interactions between Bioactive Compounds.

This study aimed to investigate the possibility of utilizing oat by-products for fiber preparation. Oat husk (OH) and oat bran (OB) were micronized and used to prepare a novel product rich in fiber and with enhanced antioxidant properties. The basic chemical composition and phenolic acid profile were determined in OH and OB. The antioxidant properties of OH and OB were also analyzed. The type and strength of interactions between the biologically active compounds from their mixtures were characterized by an isobolographic analysis. The analyses showed that the sum of phenolic acids was higher in OH than in OB. Ferulic acid was dominant in both OH and OB; however, its content in OH was over sixfold higher than that in OB. The results also suggested that both OH and OB can be used for preparing fiber with enhanced antioxidant properties. The optimal composition of the preparation, with 60-70% of OH and 30-40% of OB, allows for obtaining a product with 60-70% fiber and enhanced antioxidant activity due to bioactive substances and their synergistic effect. The resulting product can be a valuable additive to various food and dietary supplements.

Low-Carbohydrate, High-Protein, and Gluten-Free Bread Supplemented with Poppy Seed Flour: Physicochemical, Sensory, and Spectroscopic Properties.

BACKGROUND: This study aimed to determine the effect of poppy seed flour (PF) on the physicochemical and spectroscopic properties of low-carbohydrate, high-protein, and gluten-free bread. METHODS: The changes at the molecular level were assessed in bread using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Bread prepared with buckwheat, flaxseed, and pea protein was enriched with PF at a concentration of 5-15%. RESULTS: The results showed that the pasting parameters of dough supplemented with PF were significantly decreased compared to the control sample. The obtained bread samples were characterized by good quality and had 14.6% of carbohydrate, 16.3% of protein, 10.2% of fiber, and 4.0% of fat, with a caloric value of 177 kcal/100 g. The addition of PF had little influence on crumb mechanical properties. The ATR-FTIR analyses revealed spectral changes in the region related to protein and carbohydrate structures, as well as changes in band intensity characteristic of α-1,4-glycoside and α-1,6-glycoside bonds. The analyses showed that the main starch skeleton remained clearly visible. CONCLUSIONS: PF up to 10% can be potentially applied as a functional ingredient in the production of bread based on buckwheat and linseed flour. Such low-carbohydrate bread can be particularly useful to diabetics.

Finite Element Simulation Tests of the Structural Strength of the Molding Module for Burger Production from Vegetable Outgrades.

The aim of the study was to assess the stresses of the structural materials of the forming module in the process of burger production from vegetable outgrades. The simulation research object was a virtual CAD 3D model of a device used for forming multi-vegetable products. Strength tests were performed on the computational model by applying the finite element method. The following were analyzed in the model: the forces exerted by the mixture of vegetables on the side walls of the tank and the dosing unit; the force from the servomotor resulting from the horizontal thickening of the vegetable mixture; the force from the servomotor resulting from the vertical mixing of the vegetable mixture; the force from the die assembly actuator; the force caused by punching the actuator from the die assembly. For evaluating the structure in the scope of the study, it was assumed that safely reduced stresses should be taken into account, with a safety factor equal to 1.1 of the yield strength of the parent material from which the structure was made (steel 1.4301 (304) with a yield stress Re0.2 of 230 MPa). For welds, safely reduced stresses should be taken into account, with a safety factor equal to 1.4 of the yield strength (Re0.2 of 230 MPa). Strength analyses confirmed that the permissible stress levels were not exceeded in the molding module.

Black Cumin Pressing Waste Material as a Functional Additive for Starch Bread.

The aim of the study was to determine the effect of the addition of black cumin (Nigella sativa L.) pressing waste (BCW) and black cumin seeds (BCS) on the properties of starch bread. The control bread was prepared from wheat starch (100%) with a gluten-free certificate, plantain husk (5%), and guar gum (2%). BCS and BCW were added between 0 and 10% of wheat starch. We determined the physicochemical properties, color, texture, and sensory properties of the prepared bread. Gas chromatography-mass spectrometry (GC-MS) analysis was performed to detect the phenolic compounds in the bread. The bread prepared with 6% BCS and 4% BCW had a significantly higher volume than the starch control bread did. Sensory analysis (taste) showed that BCS and BCW could be added up to 4% and 8%, respectively. The addition of BCS and BCW reduced the brightness of the crumb. A significant decrease in the L * index of the crumb was observed from 50.9 for the control bread to 34.1 and 34.0 for bread with 10% BCS and BCW, respectively. The addition of BCS and BCW decreased the hardness, elasticity, and chewiness of the starch bread crumb. Starch bread enriched with BCS and BCW was characterized by a higher content of 2-hydroxybenzoic acid, 2-hydroxyphenyl acetic acid, and 4-hydroxyphenyl acetic acid.

Physico-chemical properties of an innovative gluten-free, low-carbohydrate and high protein-bread enriched with pea protein powder.

The study aimed to determine the effect of pea protein powder on the pasting behavior and physico-chemical properties including the composition of amino and fatty acids of gluten-free bread with low-carbohydrate content. The control bread recipe was based on buckwheat flour (50 g) and flaxseed flour (50 g) as main flours. Additionally, the improving additives for this control bread such as psyllium husk (4 g), potato fiber (2 g), and guar gum (2 g) were used. The mixture of base flour was supplemented with the addition of pea protein powder (PPP) in the amount ranging from 5 to 25%. The results of Visco analyzes measured by RVA apparatus showed that the addition of 10% PPP to the control bread did not significantly differentiate peak viscosity and pasting temperature which was at the level 3115 cP and 3149 cP and 50 °C, respectively. Supplementation of low-carbohydrate bread with 10% of PPP was acceptable and significantly increased the content of all analyzed amino acids, as well as the amount of α-linolenic acid concerning the control bread. The lowest value of chemical score was observed for leucine. The EAAI (essential amino acid index) value increased from 34 to 40 when the optimal protein supplement was added. The developed gluten-free, low-carbohydrate, and high protein bread was characterized by contents of carbohydrate of 16.9%, protein of 17.1%, fiber of 13.7%, fat of 3.3% and its calorific value was 194 kcal/100 g.