Biofilm formation of Streptococcus mutans, Streptococcus sanguinis, Staphylococcus epidermidis, Staphylococcus aureus, Lactobacillus casei, and Candida Albicans on 5 thermoform and 3D printed orthodontic clear aligner and retainer materials at 3 time points: an in vitro study.

INTRODUCTION: Orthodontic clear aligners and retainers have numerous advantages that is making them ever increasingly popular. However, they might, similar to any other oral appliance, contribute to biofilm formation and finally dental caries or white spot lesions or gingival inflammations. The literature on biofilm formation on orthodontic clear appliances is very scarce and limited to a few microorganisms and materials. Therefore, this experimental study evaluated the biofilm formation on 5 thermoformed and 3D printed CAD/CAM orthodontic retainers in 3 intervals. METHODS: In this in vitro study, 345 specimens (270 test discs and 45 negative controls) were created from fabricated retainers. Retainers included a 3D printed CAD/CAM material (Detax) and four thermoformed retainers [Erkodent (polyethylene terephthalate glycol [PETG]); EasyVac (polyethylene); DB (polyester based on terephthalic acid); and Clear Tech]. They were all 1 mm thick, and all completely fabricated, i.e., heated or printed. The discs were placed in 96-well plates. Microorganisms were cultured on 270 discs for 24 h (90 discs), 72 h (90 other discs), and 5 days or 120 h (90 other discs). Biofilm formation of the strains and negative controls was measured using the microtiter plate assay by ELISA reading. The microbes' ability to produce biofilm was categorized based on the comparison of average optical density (OD) of tests versus a cut-off point OD (ODc) calculated as the average of the OD of corresponding negative controls plus 3× its standard deviation: non-biofilm former [OD ≤ ODc], weak biofilm former [ODc < OD ≤ (2 × ODc)], moderate biofilm former [(2 × ODc) < OD ≤ (4 × ODc)], and strong biofilm former [(4 × ODc) < OD]. These were also converted to ranked scores between zero (no biofilm) and 3. The difference between ODs with control ODs were calculated. These were analyzed using 3-way ANOVA, 2-way ANOVA, and Tukey tests (α = 0.05, α = 0.008). RESULTS: The 3-way ANOVA showed that the overall difference among the ΔODs of 5 retainers (all microorganisms and all intervals combined, n = 270) was not significant (F = 1.860, P = 0.119). Nevertheless, the difference among 3 intervals (F = 31.607, P = 0.0000) and the difference among the 6 microorganisms (F = 24.044, P = 0.0000) were significant. According to the Tukey test, the differences between the 1st interval with either of the other two intervals was significant (both P values = 0.000). There were significant differences between Candida albicans with all other organisms (all 5 P values = 0.0000). All other pairwise comparisons were insignificant (all 10 P values ≥ 0.1). After taking the averages of the 3 intervals, the order of the biofilm generation for different materials were as follows: Detax (average score: 1.56), Easyvac (1.67), Erkodent (1.78), Clear Tech (1.83), BD (2.28). CONCLUSIONS: As far as these 6 microorganisms are of concern, there might not be a significant overall difference among the clear retainer materials tested in this study. A significant overall increase was observed between the first and third days, which later did not significantly increase more until day 5. The Candida albicans biofilm was more intense than the tested 5 bacteria, which themselves showed rather similar growth patterns to each other.

Effects of facial forms and midline deviations and rolls on female facial beauty according to laypeople, orthodontists, and prosthodontists or restorative dentists.

No study has examined the simultaneous effect of facial forms, midline deviations and midline angulations on facial beauty. Therefore, this comprehensive study aimed to evaluate these and many other hypotheses. This psychometric study was performed on 15,042 observations. A female frontal photograph was edited to 45 perceptometric images with controlled anatomical alteration: 3 facial forms (euryprosopic [brachyfacial], mesoprosopic [mesofacial], leptoprosopic [dolichofacial]), each having either 9 bidirectional midline deviations (0, 1, 2, 3, and 4 mm deviated to the left and right) or 7 bidirectional midline angular deviations (0°, 5°, 10°, and 15° deviated to the left and right). One of the photographs were repeated. These 46 images were esthetically judged by 327 participants (243 laypeople, 49 orthodontists, and 35 'prosthodontists or restorative dentists'). Hierarchical mixed-model multiple linear regressions and post hoc tests were adopted to evaluate the simultaneous impacts of the photomodel's facial forms, midline deviations to the right or left, and midline rolls to the right or left plus sex, age, experience, and dental specialty of the referees on their perception of facial beauty as well as the tolerable zones of midline alterations. These were also done separately for each specialty group, and also for each facial face. Ideal combinations of anatomic features were determined using repeated-measures ANOVAs. Differences between esthetic preferences of different groups in terms of each image were assessed using one-way ANOVAs and t-tests (α = 0.05, α = 0.008, α = 0.001). All 5 anatomical features significantly and independently influenced perception of facial beauty. The tolerance threshold for midline deviations was 1 mm deviations to the right and left sides. For midline rolls, the only tolerable form was the no-roll ('on') midline; the judges preferred right-oriented defects over left-sided ones. The most beautiful facial form was mesoprosopic, followed by leptoprosopic. Men perceived the female face slightly more attractive than did women. The viewers' specialty (or lack of it), their age, or their experience did not affect their esthetic preferences. Predictors of esthetic preferences were all 5 anatomical features plus views' sex, but not their dental specialty, age, or experience. Zones of acceptability and also the ideal range of anatomical features were determined.

Effects of Chitosan as a Novel Obturation Material for Pulpectomized Teeth on Periapical Inflammation, Periodontal Ligament Widening, and Hard Tissue Resorption: A Preliminary Exploratory Study on Dogs.

Objectives: This preliminary animal study was conducted to assess the effects of chitosan as a novel obturation material for pulpectomized teeth on periapical inflammation, periodontal ligament (PDL) widening, and hard tissue resorption. Materials and Methods: Forty premolar root canals in two mature dogs were obturated with zinc oxide eugenol (ZOE) and an experimental 3% chitosan paste (n=20 in each group). The teeth were then restored with amalgam. After 28 days, the dogs were sacrificed, and histopathological assessment was performed. The amount of resorbed obturation material, degree of inflammatory response, degree of PDL widening, and the number of bone/cementum/dentin resorption defects were recorded under ×40 and ×200 magnifications. Data were analyzed using the Mann-Whitney U test, one-sample Wilcoxon signed-rank test, and Fisher's exact test (α=0.05). Results: Bone, cementum, and dentin resorption were seen in 6, 10, and 1 chitosan-obturated canals and 14, 15, and 0 ZOE-obturated canals, respectively. Only the bone resorption defects were significantly fewer in the chitosan group (P=0.026). Mild, moderate, and severe inflammation were observed in 17, 3, and 0 chitosan-obturated canals, and 7, 9, and 4 ZOE-filled canals, respectively (P=0.004). Mild, moderate, and severe PDL widening were seen around 15, 5, and 0 chitosan-filled canals and 7, 12, and 1 ZOE-filled canals, respectively (P=0.025). Conclusion: The 3% chitosan was superior to ZOE in terms of causing less inflammation and PDL widening. It also decreased bone resorption and acted similar to ZOE in terms of dentin and cementum resorption.

Preparing and evaluating the anti-microbial effect of Allium jesdianum mouthwash on some of the most common oral microorganisms.

Background: Due to the increasing resistance of bacteria to antibiotics and anti-bacterial compounds in plants, Allium jesdianum Boiss plant extract can be used in mouthwash compounds with its anti-microbial activity. Methods and Materials: The anti-bacterial and anti-fungal activity of A. jesdianum mouthwash was investigated on Streptococcus mutans, Streptococcus sanguis, S. salivarius and Candida albicans, and Candida tropicalis. To analyse the anti-microbial effect of this mouthwash, minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were determined by the broth microdilution method. Results: The average MIC and MBC of A. jesdianum mouthwash for S. mutans were 1.56 and 3.12 (mg/ml), respectively, for S. salivarius, 0.25 and 0.65 (mg/ml), and for S. sanguis, respectively, 0.25 and 0.65 (mg/ml). The highest MIC and MBC values were for S. mutans, and the MIC and MBC values were equal for S. sanguis and S. salivarius. Average MIC and MBC were determined as 2.41 and 4.16 (mg/ml) for C. albicans and 2.34 and 5.72 (mg/ml) for C. tropicalis, respectively. MIC values of mouthwash were higher for C. albicans and MBC values for C. tropicalis. Conclusion: Our results showed a promising anti-fungal-anti-bacterial effect of A. jesdianum extract. A. jesdianum extract may be used as an alternative to chemical mouthwashes.

Attractive combinations of female gingival displays, buccal corridor sizes, and facial heights according to orthodontists, dentists, and laypeople of different ages and sexes: a psychometric study.

INTRODUCTION: Esthetics plays a crucial role in orthodontics and many other dental and medical fields. To date, no study has assessed the combined effects of the 3 facial features 'facial height, gingival display (GD), and buccal corridor size (BC)' on facial/smile beauty. Therefore, this study was conducted for the first time. METHODS: In this psychometric diagnostic study, beauty of 27 randomized perceptometric images of a female model with variations in facial heights (short, normal, long), gingival displays (0, 2, 4, 6 mm), and buccal corridor sizes (2%, 10%, 15%, 20%, 25%) were evaluated by 108 judges (36 orthodontists, 36 dentists, 36 laypeople) using a 5-scale Likert scale (1 to 5). Combined effects of facial heights, GDs, BCs, judges' sexes, ages, and jobs, and their 2-way interactions were tested using a mixed-model multiple linear regression and a Bonferroni test. Zones of ideal features were determined for all judges and also for each group using repeated-measures ANOVAs and the Bonferroni test (α=0.05). RESULTS: Judges' sex but not their age or expertise might affect their perception of female beauty: men gave higher scores. The normal face was perceived as more beautiful than the long face (the short face being the least attractive). Zero GD was the most attractive followed by 4 mm; 6 mm was the least appealing. BCs of 15% followed by 10% were the most attractive ones, while 25% BC was the worst. The zone of ideal anatomy was: long face + 0mm GD + 15% BC; normal face + 2mm GD + 15% BC; long face + 2mm GD + 15% BC; normal face + 0mm GD + 15% BC. CONCLUSIONS: Normal faces, zero GDs, and 15% BCs may be the most appealing. Facial heights affect the perception of beauty towards GDs but not BCs.

Effects of clear aligners on the vertical position of the molar teeth and the vertical and sagittal relationships of the face: a preliminary retrospective before-after clinical trial.

INTRODUCTION: Despite the popularity of clear aligners, their predictability has not been assessed adequately. Moreover, no study has investigated their effects on numerous dentomaxillary variables. Therefore, this study was conducted for the first time, assessing several new or controversial items. The aim of the study was to evaluate the effects of clear aligners on the vertical position of the molar teeth and the vertical and sagittal relationships of the face. METHODS: This preliminary retrospective before-after non-randomized clinical trial was performed on 168 observations of 84 patients (33.60±9.28 years, 54 females) treated with 0.75mm Invisalign appliances. Pretreatment and posttreatment values were measured for: mandibular plane angle, occlusal plane angle, Y-Axis, ANB, facial angle, lower anterior facial height, overbite, and the distances of the molars from the palate and mandibular plane were measured. The alterations in parameters caused by treatment (delta values) were calculated for each measurement. Effects of treatment and some parameters on delta values were analyzed statistically (α=0.05). RESULTS: Mean±SD of ΔMP-FH, ΔOP-FH, ΔY-Axis, ΔLAFH, ΔNPog-FH, ΔANB, ΔOverbite, ΔSNB, Δ6-PP, Δ7-PP, Δ6-MP, and Δ7-MP were respectively 0.11±1.61, 0.80±1.56, 0.15±1.18, 0.07±0.91, -0.22±1.25, 0.03±0.62, 0.04±1.15, -0.06±1.14, -0.36±0.94, -0.32±1.14, 0.19±0.96, 0.18±1.10. Only the alterations in OP-FH, 6-PP, and 7-PP were significant (P≤0.011). Age, sex, treatment duration, or pretreatment mandibular plane angle were not correlated with any delta values. However, the pretreatment occlusal plane angle was negatively correlated with ΔOP-FH and ΔY-Axis. Crowding was correlated negatively with ΔOP-FH and ΔY-Axis and positively with ΔNPog-FH. Overjet was negatively correlated with ΔANB and ΔOverbite (P≤0.035). CONCLUSIONS: Invisalign intruded first/second maxillary molars and increased the occlusal plane angle. Age, sex, and treatment duration were not correlated with post-treatment anatomic alterations.

Morphometric variations and nonmetric anatomical traits or anomalies of the primary molar teeth, plus the molars' size thresholds for sex identification.

INTRODUCTION: Morphological and morphometric features of the teeth are of interest to various clinical and academic dental and medical fields including prosthodontics, orthodontics, anatomy and anthropology, pathology, archeology, and forensic dentistry. These have been more or less researched in the case of the permanent dentition. However when it comes to the primary dentition, the literature is scarce and controversial. No study worldwide exists on the cutoff points (thresholds) for sex identification; no study exists on metric or nonmetric traits of deciduous teeth in Iranians. Hence, the aim of the study was to assess both the metric and nonmetric traits of primary molars, as well as their cut-off points for sex identification. METHODS: In this epidemiological cross-sectional study, pretreatment casts of 110 children (51 boys and 59 girls) aged 6 to 12 years were collected. Maxillary and mandibular first and second primary molars were evaluated regarding their metric traits (mesiodistal and buccolingual widths) and 9 nonmetric traits (Accessory cusp on the upper D, Accessory cusp on the lower D, Fifth cusp on the upper E, Carabelli's cusp on the upper E, Protostylid on the lower E, Fifth cusp on the lower E, Sixth cusp on the lower E, Tuberculum intermedium [metaconulid] on the lower E, and Deflecting wrinkle on the lower E). ROC curves were used to identify cut-off points for sex determination as well as the usefulness of metric measurements for this purpose. Data were analyzed using independent-samples and paired-samples t-tests, McNemar, Fisher, and chi-square tests, plus Pearson and Spearman correlation coefficients (α = 0.05). RESULTS: All the primary molars' coronal dimensions (both mesiodistal and buccolingual) were extremely useful for sex identification (ROC curves, all P values ≤ 0.0000099). Especially, the mandibular primary molars (areas under ROC curves [AUCs] between 85.6 and 90.4%, P values ≤ 0.0000006) were more useful than the maxillary ones (AUCs between 80.4 and 83.1%, P values ≤ 0. 0000099). In the mandible, the first primary molar (maximum AUC = 90.4%) was better than the second molar (maximum AUC = 86.0%). The optimum thresholds for sex determination were reported. Sex dimorphism was significant in buccolingual and mesiodistal crown widths of all the primary molars (all P values ≤ 0.000132), but it was seen only in the case of 2 nonmetric traits: Deflecting wrinkle (P = 0.001) and Tuberculum intermedium (metaconulid, P = 0.029) on the lower Es, taking into account the unilateral and bilateral cases. The occurrence of nonmetric traits was symmetrical between the right and left sides (all P values ≥ 0.250). All mesiodistal and two buccolingual molar measurements were as well symmetrical (P > 0.1); however, two buccolingual measurements were asymmetrical: in the case of the maxillary E (P = 0.0002) and mandibular D (P = 0.019). There were three weak-to-moderate correlations between the nonmetric traits of the mandibular second molars (Spearman correlations between 22.7 and 37.5%, P values ≤ 0.045). Up to 6 concurrent nonmetric traits were observed in the sample, with 53.6% of the sample showing at least 2 concurrent nonmetric traits at the same time, without any sex dimorphism (P = 0.658). CONCLUSION: Sex dimorphism exists considerably in primary molars' sizes, but it is not as prevalent in their nonmetric traits or abnormalities. Primary molars' crown sizes are useful for sex identification; we calculated optimum cut-off points for this purpose, for the first time.

Associations between the 3D position of the mental foramen with sagittal skeletal relationships (classes I, II, and III) and vertical facial growth patterns (normal, long, and short faces) in different ages and sexes: a retrospective cohort study of 360 CBCTs.

BACKGROUND: The 3D position of the mental foramen (MF) is of significant clinical value in dental implantology and mandibular surgeries or in local anesthesia. Despite its importance, it is not clearly known how the position of MF can alter in different individuals, since the literature on the associations between the MF position with vertical growth patterns is non-existent and those on links between the MF position and skeletal malocclusions are scarce. Therefore, we aimed to investigate these, for the first time, on cone-beam computed tomographies (CBCTs). METHODS: Archival CBCTs of 9 sub-groups (i.e., 3 skeletal Classes I, II, and III × 3 vertical growth patterns 'long face, short face, normal face') were collected by evaluating patients' SNA, SNB, ANB, facial angle, lower facial height, and FMA (n = 9 × 40 = 360). Included cases were older than 17 years and without any history of orthodontic/orthognathic treatments (243 women, 117 men, mean age: 22.28 ± 2.80 years). Perpendicular distances between the MF and 3 fixed bony structures (the mandibular symphysis [S/width], the mandibular ramus [R/length], and the mandibular lower cortex [C/height]) were measured on different sectional planes on both hemimandibles. Left- and right-side measurements were combined. Data were analyzed using the 3-way ANCOVA, Bonferroni, one-way ANOVA, Tamhane, Pearson, and t-test (α = 0.05). RESULTS: Width was the smallest in Class II and greatest in Class III cases (all P values < 0.000001, Bonferroni). It was the shortest in long faces and longest in short faces (all P values ≤ 0.00008). The inferior-superior height was larger in Class III than both Classes I and II (both P values ≤ 0.003); there was no significant difference between Classes I and II in terms of height (P = 0.684). Height was the largest in long faces and smallest in short faces (all P values < 0.000001). The anterior-posterior length was the largest in Class III and smallest in Class II (all P values < 0.000001). Length was larger in short-face people versus normal- or long-face individuals (P ≤ 0.00003); nevertheless, long and normal faces did not differ in terms of length (P = 0.448). Subjects' age was not correlated with their MF positions (P ≥ 0.579, Pearson coefficient). Sex dimorphism existed only for height (P = 0.009, t-test) but not for length or width. CONCLUSIONS: The MF position may considerably differ in various horizontal or vertical growth patterns and sexes. This should be noted in mandible surgeries.

Associations across 22 dental and craniovertebral anomalies or variations, sagittal skeletal relationships, and vertical growth patterns: a comprehensive epidemiological study of 43 dentoskeletal traits.

INTRODUCTION: Despite researchers' recent interest in identifying links between some dental and craniovertebral abnormalities, there are many important, unassessed gaps in our knowledge of this matter. In addition, previous samples were small. This large study aimed to examine, for the first time, the occurrence/severity of numerous dental and skeletal anomalies or variations and their correlations with each other and with growth patterns. METHODS: This epidemiological study was conducted on pretreatment radiographs of 1194 patients from 3 cities (815 females). Skeletal sagittal skeletal relationships and vertical growth patterns were determined. The occurrence/severity were assessed for: cervical vertebral fusion (CVF), atlas posterior arch deficiency (APAD), ponticulus posticus (PP), sella turcica bridging (STB), hypodontia, oligodontia, hyperdontia, missing of maxillary laterals, microdontia, macrodontia, root dilaceration, odontoma, taurodontism, dental fusion, dental gemination, enamel pearl, permanent molar ankylosis, primary molar ankylosis, dens in dente, dens invaginatus, dental impaction, ectopic eruption, and dental transposition. Incidental findings were recorded as well. Concurrent anomalies, sex dimorphism, and correlations across variables were examined statistically, adjusting for the false discovery rate (α = 0.05). RESULTS: Prevalence was calculated for 43 dentoskeletal traits/anomalies (22 abnormalities/variations [plus their severities/types] as well as 21 incidentally found traits/anomalies). Dental impaction may be more common in hyperdivergent and severer cases of sella bridging; also, primary molar ankylosis was associated with missing teeth. Dental impaction was associated only with STB and not with PP, APAD, or vertebral fusion. The only association observed among the four skeletal anomalies was seen between APAD and CVF. Merely the variables 'sagittal skeletal relationships, vertical growth patterns, PP, and APAD' showed sexual dimorphism; of these, only vertical growth pattern and APAD remained sexually dimorphic after adjusting for the FDR; still, the other two remained marginally significant and worth further evaluations. Sex dimorphism did not exist in concurrent abnormalities. The skeletal Class III was associated with the concurrent occurrence of craniovertebral, dental, and dentoskeletal abnormalities. Skeletal Class I was associated with fewer occurrences of concurrent dental anomalies. Vertical growth patterns were not associated with concurrent dental or dentoskeletal anomalies. However, the hyperdivergent pattern was associated with fewer cases of concurrent craniovertebral abnormalities. CONCLUSIONS: STB and hyperdivergent pattern were associated with dental impaction. However, APAD, CVF, or PP were not associated with dental impaction. APAD was associated with CVF. Sexual dimorphism existed conclusively in the case of vertical growth patterns and APAD. Concurrent abnormalities (dental, skeletal, and dentoskeletal) were associated with skeletal Class III.

Factors affecting the maxillary and mandibular incisors' buccolingual inclinations and buccal and lingual cortical plate heights.

INTRODUCTION: Orthodontics is closely related to periodontics. The buccolingual inclination (BLI) of the incisors and deficiencies in their buccal (BHd) and lingual (LHd) cortical plate heights may affect orthodontic outcomes. Identifying risk factors that can compromise buccal or lingual bone heights may have clinical value. The literature on BLI/BHd/LHd is not only scarce but also limited to one jaw. We aimed to examine, for the first time, factors affecting BLI/BHd/LHd not evaluated before as well as other factors with scarce literature about them. METHODS: In this two-phase epidemiological and analytical study, inclinations and cortical heights of 248 incisors (bilateral centrals and laterals) were evaluated blindly on 62 randomly selected high-resolution pretreatment cone-beam computed tomography volumes (30 maxillae [13 men, 17 women], 32 mandibles [13 men, 19 women]). The sample was balanced in terms of sexes, jaws, and ages. The BLI/BHd/LHd of bilateral incisors were measured (intraobserver agreement > 95%). The effects of jaws, sexes, age, sides, and incisor types on each of the anatomical variables (BLI/BHd/LHd) were analyzed using a Mixed-Model Multiple Linear Regression analysis. Correlations among continuous variables were assessed using a Pearson coefficient (α = 0.05). RESULTS: For the maxillary centrals, BLI, BHd, and LHd were 106.79 ± 5.06, 1.94 ± 0.95, and 1.50 ± 0.76, respectively. These parameters were '110.56 ± 5.97, 1.81 ± 0.83, 1.23 ± 0.69' for the maxillary laterals; '97.64 ± 8.26, 2.98 ± 1.48, 3.46 ± 1.45' for the mandibular centrals; and '95.98 ± 6.80, 3.29 ± 1.72, and 2.73 ± 1.15' for the mandibular laterals. BLI was greater in the maxilla compared to the mandible and in the lateral incisors compared to centrals (P < 0.05). BHd was greater (more deficient) in the mandible (P = 0.000). Age, sex, or side were not associated with BLI (P > 0.05). Age, sex, side, or incisor types were not associated with BHd (P > 0.05). LHd was greater in the mandible, older individuals, and centrals (P < 0.05). There were some significant but weak correlations between BLI with BHd and especially LHd (P < 0.05). CONCLUSION: In the maxilla, but not in the mandible, incisors' BLI may determine LHd. Maxillary incisors may have greater BLIs as well as greater buccal and lingual alveolar bone heights compared to mandibular incisors. BLI might be greater in the laterals compared to the centrals in both jaws combined.

Effect of bleaching with 15% carbamide peroxide on color stability of microhybrid, nanohybrid, and nanofilled resin composites, each in 3 staining solutions (coffee, cola, red grape juice): A 3-phase study.

Background: The literature on the effect of bleaching on stainability and color stability of any composites is scarce and controversial. In the case of some composites and/or bleaching agents or staining solutions, there is no previous study. Therefore, this rather large study was conducted for the first time to examine simultaneously the effects of bleaching and 3 staining solutions on 3 composite types. Materials and Methods: This 3-phase experimental in vitro study was performed on 18 groups of 5 specimens each: 90 composite discs with 10 mm diameter and 1 mm thickness were fabricated from 3 resin composites (microhybrid, nanohybrid, and nanofilled). Forty-five discs underwent bleaching with 15% carbamide peroxide, and the remaining 45 were immersed in distilled water at room temperature. The color assessment was performed before and after this step, and Δa, Δb, and ΔL color parameters were calculated for each specimen. The specimens were then immersed in coffee, cola, and red grape juice for 2 weeks, and underwent colorimetry again. The simultaneous effects of bleaching and staining agents and composite types on ΔE (color changes) of composite specimens were analyzed using an independent-samples t-test, a Mann-Whitney U-test, and two-way and one-way analysis of variances followed by a Tukey and a Dunnett's T3 tests (α = 0.05). Results: Bleaching had no significant effect on color changes of microhybrid, nanohybrid, or nanofilled composites (P > 0.05). The stainability of composites did not increase after bleaching (P > 0.05). Regardless of the composite type and the presence of bleaching, coffee had the worst effect on color of composite specimens, while cola had the smallest staining effect (P < 0.05). Conclusion: Stainability of microhybrid/nanohybrid/nanofilled composites did not increase after bleaching with 15% carbamide peroxide. Coffee should be consumed with care, as far as composite coloring is a concern, regardless of the type of composite in use or its bleaching history. Cola was the weakest stainer. Coffee always caused perceptible staining (ΔE >3.7), regardless of the composite in use or its bleaching history. Red grape juice caused such perceptible colorations in most cases. Cola did not cause any perceptible discoloration in most cases.

A systematic review of biocompatibility and safety of orthodontic clear aligners and transparent vacuum-formed thermoplastic retainers: Bisphenol-A release, adverse effects, cytotoxicity, and estrogenic effects.

Background: An ever-increasing demand is seen for clear aligners and transparent vacuum-formed retainers. They are esthetic and convenient. However, the biomaterials used in these appliances might pose biological safety and biocompatibility threats in terms of their bisphenol-A (BPA) release, cytotoxicity, adverse effects, and estrogenic effects. Due to the controversial results and the lack of any systematic reviews in this regard, we conducted this systematic review. Materials and Methods: Web of Science, PubMed, Cochrane, Scopus, and Google Scholar as well as references of the found articles were searched (independently by 3 researchers) up to December 22, 2021, to find studies relevant to the biocompatibility of clear aligners and thermoplastic retainers. The search keywords were a combination of the following (and more): Essix, vacuum-formed aligner, thermoplastic aligner, clear aligner, Invisalign, vacuum-formed retainer, BPA release, monomer release, cytotoxicity, estrogenicity, biocompatibility, chemical properties, and oral epithelial cell. As eligibility criteria, articles in all languages would be included as long as their text could be translated clearly using online translators or by professional translators; all types of publications (article, book, and thesis) would be included if containing relevant studies and information; they should have been on clear liners or thermoplastic retainers; and they should have been on biocompatibility, safety, cytotoxicity, or estrogenicity of clear aligners or thermoplastic retainers. There were no restrictions on the type of study (randomized clinical trials, experimental in vitro studies). Studies focusing merely on the mechanical properties of clear aligners or thermoplastic retainers (without examining their chemical properties) would be excluded. The risk of bias was assessed. Results: The risk of bias was rather low. However, the methodologies of the studies were quite different. Overall, 16 articles (1 randomized clinical trial and 15 in vitro studies) were identified. The data for BPA release were reported in four articles (1 clinical trial and 3 in vitro studies). Quantitatively speaking, the amount of released BPA reported by in vitro studies was very low, if not zero. However, the BPA level was very high in the only randomized clinical trial. Many adverse effects were linked to using clear aligners or transparent retainers, including pain and soft-tissue issues such as burning, tingling, sore tongue, lip swelling, blisters, ulceration, dry mouth, periodontal problems, and even systemic problems such as difficulty in breathing. Besides these biological adverse effects, oral dysfunctions and speech difficulties and tooth damage may be associated with clear aligners and should as well be taken into consideration. Conclusion: Given the very high levels of BPA leach observed in the only clinical trial and considering other possible dangers of small traces of BPA (even at low doses) and also given the numerous adverse events linked to clear aligners or transparent retainers, it seems that safety of these appliances might be questionable and more clinical studies of biocompatibility are needed in this regard.

Effects of lidocaine incorporation (without epinephrine) on pain and 2-week complications of botulinum toxin: a double-blind randomized placebo-controlled clinical trial.

No study has assessed the effects of the incorporation of isolated lidocaine into botulinum toxin for reducing its pain or complications. Studies on the dilution of botulinum toxin with other materials are as well extremely few, small, and limited methodologically. Therefore, we aimed to evaluate, for the first time, the effects of the incorporation of lidocaine alone into botulinum toxin type A on post-injection pain and complications. In this 2-week prospective, multicenter, double-blind randomized placebo-controlled clinical trial, 729 participants (667 females) were enrolled. They were randomized into placebo and lidocaine dilutions (about 2:1), and then into two brands of toxins (Dysport versus Xeomin). Hence, there were 4 subgroups. In the 2 experimental subgroups, botulinum toxin was diluted with 2% lidocaine without adrenaline; in the 2 control subgroups, botulinum toxin was diluted with normal saline as a placebo. After injection, the pain level was recorded (as an 11-scale numerical rating scale from 0 to 10). After 2 weeks, post-injection complications were assessed based on the participants' reports and the surgeon's observations. Data were analyzed using 3-way ANCOVA, multiple binary logistic regression, and bivariable analyses (α = 0.05, ß ≤ 0.1). The mean ± SD pain levels in the lidocaine group (n = 263) and the placebo group (n = 466) were 3.51 ± 2.04 and 4.15 ± 2.35, respectively. The mean ± SD pain levels in the subgroups 'Xeomin-Lidocaine (n = 61), Dysport-Lidocaine (n = 202), Xeomin-Placebo (n = 133), and Dysport-Placebo (n = 333)' were respectively 3.39 ± 1.86, 3.55 ± 2.09, 4.61 ± 2.49, and 3.97 ± 2.24. Lidocaine incorporation (P = 0.001), Dysport brand (P = 0.030), and younger age (P = 0.032) [but not sex (P = 0.406)] reduced pain. The only significant findings for 2-week complications were for the associations observed between aging with increased asymmetry (P = 0.022, OR = 1.032) and a need for a retouch (P = 0.039, OR = 1.021). Botulinum toxin dilution with lidocaine alone (without adrenaline or other ingredients) can reduce pain without affecting postinjection complications. Toxin brands may cause different extents of pain. Aging, but not sex, may increase pain. Two-week complications were not affected by any factors, except aging in the case of asymmetry and the need for a botulinum toxin retouch.

Antibacterial activity and shear bond strength of fiber-reinforced composites and bonding agents containing 0.5%, 1%, 2.5%, and 5% silver nanoparticles.

Background: Bonded composites may increase bacterial accumulation and caries formation risk. Therefore, assessment of methods to decrease bacterial activity around them would be valuable. The literature on the efficacy of adding silver nanoparticles to fiber-reinforced composite (FRC) or adding them to bonding agents in terms of their antibacterial activity and/or shear bond strength (SBS) is scarce. Thus, we aimed to assess the antibacterial activity of flowable composites and bonding agents containing various percentages of experimental silver nanoparticles (nanosilver) against S. mutans and to evaluate the SBS of FRC and bonding agents containing different amounts of nanosilver to enamel. Materials and Methods: In this preliminary study, 0% (control), 0.5%, 1%, 2.5%, and 5% nanosilver were added to flowable composite and bonding agent. Syntheses of nanosilver and nanosilver-incorporated composite specimens were approved using X-ray diffraction spectroscopy and scanning electron microscopy. Antibacterial effects of the produced materials on S. mutans were evaluated by colony count with serial dilution method (n = 7 groups × 10 [n = 70] specimens) and agar disc diffusion test (n = 6 groups × 5 [n = 30] composite specimens + n = 6 groups × 5 [n = 30] light-cured bonding + n = 6 groups × 5 [n = 30] uncured bonding) against negative control and cefotaxime antibiotic. Moreover, SBS values of various FRC blocks bonded to enamel using various bonding agents were measured (n = 9 groups × 6 [n = 54] human premolars). Data were analyzed using Kruskal-Wallis, Dunn, two-way analysis of variance, and Tukey's tests (α = 0.05). Results: Composite discs containing all concentrations of nanosilver reduced S. mutans colony counts (P < 0.05); bacterial growth was ceased at samples containing 2.5% and 5% of nanosilver. The reduction in the SBS of FRCs was significant only for 5% nanosilver (P < 0.05). Conclusion: Adding 0.5%, 1%, and 2.5% nanosilver to composite and 0.5% or 1% nanosilver to bonding agent led to a significant antibacterial behavior against S. mutans while not significantly affecting the SBS of FRC.

Combined Effects of Different Bracket Bonding Adhesives and Different Resin Removal Methods on Enamel Discoloration: A Preliminary Study.

Introduction: This study aimed to investigate the effects of 3 orthodontic bracket adhesives and 3 resin removal methods on enamel discoloration. Methods: Ninety metal orthodontic brackets were bonded to 90 intact human premolars, using 3 adhesives (total etch composite (Transbond), self-etch composite (OptiBond), and light-curedresin-modified glass ionomer cement (RMGI, Fuji); n = 3 × 30). Each "bracket bonding" group (n = 30) was randomly divided into three subgroups of 10 specimens each, each with a different method of remnant resin removal (using only tungsten carbide burs; using tungsten carbide burs plus Sof-Lex polisher discs; using tungsten carbide burs and Stainbuster burs; n = 3 × 30). After bracket debonding and coffee staining (at 37°C for one week), the color change parameters (Δa, Δb, ΔL, and ΔE) were measured and then analyzed statistically (α = 0.05). Results: All 9 mean ΔE values were significantly greater than 3.7 and 1.0 (P values ≤0.002, t-test). The effects of composites and resin removal methods on the ΔE parameter (and their interaction) were significant (P values ≤0.008, two-way ANOVA). There were significant pairwise comparisons between total etch (Transbond) and each of the other composites (P values ≤0.008, Tukey). Nonetheless, the difference between self-etch (OptiBond) and RMGI (Fuji) was not significant (P=0.967). There were significant pairwise comparisons between the ΔE parameter of group "Bur + Stainbuster" and ΔE of each of the other methods (both P values ≤0.017). Conclusions: All 9 pairs of adhesives and resin removal techniques will cause quite visible discolorations. Still, self-etch composites or RMGI might be recommended over total etch composites. Moreover, using Stainbuster burs together with tungsten carbide burs is recommended to reduce discoloration. However, the coloration caused by each composite type can change drastically given the following adhesive removal technique used.

Associations among the occurrence or types of maxillary canine impaction, labial frenum attachment types, lateral incisor anomalies, and midline diastema in patients with and without impaction: A case-control study.

INTRODUCTION: We tested whether the labial frenum attachment types may affect the occurrence or type of maxillary canine impaction. METHODS: This case-control study was performed on 96 subjects (48 with maxillary canine impaction [20.50±4.99 years, 32 females], 48 controls [21.94±3.79, 31 females]). Types of canine impaction (buccal/palatal, bilateral/unilateral, left/right), types of upper lip middle frenums (mucosal, gingival, papillary), the anatomy of lateral incisors (impacted, peg shaped, small, normal), and the midline diastema were evaluated clinically and radiographically. Associations were examined using multiple binary logistic regression, 3-way repeated-measures ANCOVA, and Fisher tests (α=0.05, ß=0.2). RESULTS: The numbers of mucosal, gingival, and papillary frenums in the case group were '29, 14, and 5', respectively; in the control group, they were '25, 21, and 2' (Fisher, P=0.248). The numbers of mucosal, gingival, and papillary frenums were respectively '25, 11, and 1' in the palatally impacted canine subgroup; they were '4, 3, and 4' in the buccally impacted subgroup (Fisher, P=0.010). Abnormal laterals were present in 12 cases and 4 controls; normal laterals were observed in 36 cases and 44 controls (Fisher, P=0.053). Abnormal laterals were seen in 10 cases with palatally impacted canines and 2 cases with buccally impacted canines; normal laterals existed in 27 cases with palatally impacted canines and 9 cases with buccally impacted canines (Fisher, P=0.705). Lateral anatomy was not associated with frenum attachment (Fisher, P=0.827). Greater midline diastemas were seen in cases with maxillary canine impaction, papillary frenums, and abnormal laterals (ANCOVA, P≤0.016). CONCLUSIONS: Buccal type of canine impaction is positively associated with papillary labial frenums. Canine impaction is 3.6 folds more prevalent in cases with lateral abnormality. Midline diastema is positively and independently associated with canine impaction, papillary frenums, and abnormal laterals.

Effects of fixed orthodontic treatment with and without chlorhexidine mouthwash on vitality of oral mucosal cells reflected by cell nuclear indexes: A preliminary 3-phase before-after clinical trial.

INTRODUCTION: Effects of mouthwashes on the vitality of oral mucosal cells have not been determined in orthodontic patients. We aimed to assess, for the first time, the effects of fixed orthodontic treatment with and without chlorhexidine (CHX) mouthwash on the oral mucosal cell vitality. MATERIALS AND METHODS: All patients meeting the eligibility criteria were consecutively included until the desired sample size was reached. Oral buccal mucosal cell samples were taken immediately before orthodontic treatment. For each patient, 20 metal brackets and 4 bands were installed on the teeth. Cell samples were recollected after one month of treatment. Then, the patients used an ethanol-free 0.12% CHX mouthwash two times a week for one month. Sampling was repeated at the end of the second month. Papanicolaou staining was used for micronucleus screening of the indexes: micronucleus (MIC), karyorrhexis (KR), karyolysis (KL), and broken eggs (BE). The repair index (RI) was calculated as RI=KR+KL/BE+MIC. Comparisons of nuclear changes over 3 intervals were done using the Friedman and Dunn-Bonferroni tests (α=0.05, ß<0.05). RESULTS: This prospective before-after clinical trial was performed on 408 observations of 34 patients (14 males, 20 females, mean age: 16.68±3.75 years) at 3 intervals (×4 parameters each). The means of MIC, KR, KL, BE, and RI were respectively 1.312±1.219, 0.241±0.564, 0.426±0.657, 0.115±0.224, and 0.476±0.360 before treatment. They were 1.348±1.171, 0.215±0.236, 0.406±0.369, 0.124±0.187, and 0.511±0.310 at the first interval and 1.909±1.263, 0.368±0.174, 0.615±0.269, 0.253±0.150, and 0.529±0.195 at the second interval. Friedman showed significant time-dependent changes for all variables (P<0.0005) except RI. Dunn-Bonferroni showed that except MIC (P=0.017), KR/KL/BE changed insignificantly after orthodontic treatment (P≥0.974). MIC/KR/KL/BE increased significantly after the addition of CHX (P<0.0005). CONCLUSION: CHX mouthwash, together with orthodontic treatment, has a strong deteriorating effect on nuclear indexes associated with the vitality of buccal mucosal cells. Nuclear changes caused by orthodontic treatment alone might be negligible.

Associations between body dysmorphic disorder (BDD) with the dental health component of the index of orthodontic treatment need (IOTN-DHC) and other BDD risk factors in orthodontic patients: A preliminary study.

Objective: Body dysmorphic disorder (BDD) is a form of obsessive-compulsive disorder that may be negatively associated with the self-image. It might be associated with orthodontic treatment demand and outcome, and therefore is important. Thus, this study was conducted. Methods: The Yale-Brown Obsessive-Compulsive Scale modified for Body Dysmorphic Disorder (BDD-YBOCS) questionnaire was used in 699 orthodontic patients above 12 years of age (222 males, 477 females), at seven clinics in two cities (2020-2021). BDD diagnosis and severity were calculated based on the first 3 items and all 12 items of the questionnaire. The dental health component of the index of orthodontic treatment need (IOTN-DHC) was assessed by orthodontists. Multivariable and bivariable statistical analyses were performed on ordinal and dichotomized BDD diagnoses to assess potentially associated factors (IOTN-DHC, age, sex, marital status, education level, and previous orthodontic consultation) (α = 0.05). Results: IOTN-DHC scores 1-5 were seen in 13.0%, 39.9%, 29.8%, 12.4%, and 4.9% of patients. Age/sex/marital status/education were not associated with IOTN-DHC (p > 0.05). Based on 3-item questionnaire, 17.02% of patients had BDD (14.02% mild). Based on 12-item questionnaire, 2.86% had BDD. BDD was more prevalent or severer in females, married patients, patients with a previous history of orthodontic consultation, and patients with milder IOTN-DHCs (p < 0.05). Conclusions: IOTN-DHC was negatively/slightly associated with BDD in orthodontic patients. Being female and married may increase BDD risk.