Recent Developments on the Synthesis of Oxygen- and Sulfur-containing Heterocycles and their Derivatives under Visible Light Induced Reactions.

Visible-light-mediated reactions have recently emerged as a powerful strategy for the synthesis of diverse organic molecules under mild reaction conditions. Usually, the reactions are performed at room temperature and thus sensitive functional groups remain unaffected. Thus, this protocol has received intense interest from academia as well as industries. The heterocycles, in general, are of much interest because of their biological activities and application in therapeutics. The Oxygen- and Sulfur-containing heterocyclic compounds have recently attracted attention as these compounds showed promising activities as anti-cancer drugs, antibiotics, antifungal and anti-inflammatory agents among other applications. The synthesis of this class of compounds by efficient and greener routes has become an important target. This review highlights the various procedures for the synthesis of these compounds and their derivatives under visible light-induced reactions. The green aspects and mechanism of each procedure have been discussed.

One-pot Synthesis and Photophysical Studies of Α-cycloamino-substituted 5-aryl-2,2'-bipyridines.

A series of α-cycloamine substituted 2,2'-bipyridines 3ae'-3ce' was obtained via the one-pot approach based on ipso-substitution of a cyano-group in 1,2,4-triazines, followed by aza-Diels-Alder reaction in good yields. Photophysical properties, including fluorosolvatochromism, were studied for 3ae'-3ce' and were compared with α-unsubstituted 2,2'-bipyridines. In addition, dipole moments differences in ground and excited states were calculated by both Lippert-Mataga equation and DFT studies and were compared to each other. The correlation between the size of cycloamine unit and the dipole moments differences value (based on Lippert-Mataga equation) was observed. In addition charge transfer indices (DCT, Λ, H and t) were calculated to demonstrate influence of molecular structure on the intramolecular charge transfer degree.

Mechanosynthesis of Polyureas and Studies of Their Responses to Anions.

Polyureas (PUs) have already found wide practical applications, and various methods of their synthesis have been reported. In this manuscript, we wished to report the very first mechanochemical approach towards aromatic PUs via reactions between isomeric 2,2'-, 3,3'-, and 4,4'-diaminobiphenyls and triphosgene under solvent-free conditions following ball-milling. By using this synthetic approach, both PUs and azomethine-capped Pus were obtained. The fluorescence response of the above-mentioned PUs towards various anions in solutions were studied and selective fluorescence responses towards the hydroxyl and fluoride anions were observed.

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives.

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.

Polyaromatic Hydrocarbon (PAH)-Based Aza-POPOPs: Synthesis, Photophysical Studies, and Nitroanalyte Sensing Abilities.

1,4-Bis(5-phenyl-2-oxazolyl)benzene (POPOP) is a common scintillation fluorescent laser dye. In this manuscript, the synthesis of 2-Ar-5-(4-(4-Ar'-1H-1,2,3-triazol-1-yl)phenyl)-1,3,4-oxadiazoles (Ar, Ar' = Ph, naphtalenyl-2, pyrenyl-1, triphenilenyl-2), as PAH-based aza-analogues of POPOP, by means of Cu-catalyzed click reaction between 2-(4-azidophenyl)-5-Ar-1,3,4-oxadiazole and terminal ethynyl-substituted PAHs is reported. An investigation of the photophysical properties of the obtained products was carried out, and their sensory response to nitroanalytes was evaluated. In the case of pyrenyl-1-substituted aza-POPOP, dramatic fluorescence quenching by nitroanalytes was observed.

TM-Free and TM-Catalyzed Mechanosynthesis of Functional Polymers.

Mechanochemically induced methods are commonly used for the depolymerization of polymers, including plastic and agricultural wastes. So far, these methods have rarely been used for polymer synthesis. Compared to conventional polymerization in solutions, mechanochemical polymerization offers numerous advantages such as less or no solvent consumption, the accessibility of novel structures, the inclusion of co-polymers and post-modified polymers, and, most importantly, the avoidance of problems posed by low monomer/oligomer solubility and fast precipitation during polymerization. Consequently, the development of new functional polymers and materials, including those based on mechanochemically synthesized polymers, has drawn much interest, particularly from the perspective of green chemistry. In this review, we tried to highlight the most representative examples of transition-metal (TM)-free and TM-catalyzed mechanosynthesis of some functional polymers, such as semiconductive polymers, porous polymeric materials, sensory materials, materials for photovoltaics, etc.

Pillararenes as Promising Carriers for Drug Delivery.

Since their discovery in 2008 by N. Ogoshi and co-authors, pillararenes (PAs) have become popular hosts for molecular recognition and supramolecular chemistry, as well as other practical applications. The most useful property of these fascinating macrocycles is their ability to accommodate reversibly guest molecules of various kinds, including drugs or drug-like molecules, in their highly ordered rigid cavity. The last two features of pillararenes are widely used in various pillararene-based molecular devices and machines, stimuli-responsive supramolecular/host-guest systems, porous/nonporous materials, organic-inorganic hybrid systems, catalysis, and, finally, drug delivery systems. In this review, the most representative and important results on using pillararenes for drug delivery systems for the last decade are presented.

Synthesis of Organosulfur and Related Heterocycles under Mechanochemical Conditions.

In the last few decades, ball-milling has received tremendous attention as a "green tool" for conducting various challenging organic transformations under transition-metal-free and solvent-free conditions. Organosulfur and related heterocycles are ubiquitous in numerous biologically active molecules with potential applications, and those molecules could be synthesized from readily available starting materials under mechanochemical conditions without using any hazardous chemical or solvent. This synopsis highlights the green strategies developed in recent times to synthesize organosulfur and related heterocycles under ball-milling conditions.

Cu(OAc)2-Promoted Ortho C(sp2)-H Amidation of 8-Aminoquinoline Benzamide with Acyl Azide: Selective Formation of Aroyl or Acetyl Amide Based on Catalyst Loading.

An efficient method for the C(sp2) amidation of 8-aminoquinoline benzamide by acyl azide in the presence of copper acetate has been achieved via C-H activation. Interestingly, the loading of copper acetate has a strong influence on the outcome of the reaction. The use of 1 equiv of copper acetate produces the corresponding aroyl amide, whereas the use of 2 equiv led to acetyl amide. A series of substituted benzoyl and acetyl amides has been obtained.

Palladium-Catalyzed Ligand-Free Decarboxylative Coupling of α- Oxocarboxylic Acid with Aryl Diazonium Tetrafluoroborate: An Access to Unsymmetrical Diaryl Ketones.

Diaryl ketones are of much importance in organic synthesis as versatile intermediates and in industry for their useful properties. A mild and efficient palladium-catalyzed traditional ligand-free decarboxylative coupling of aryl α-keto carboxylic acid with aryl diazonium fluoroborate has been developed. A series of unsymmetrical diaryl ketones has been synthesized in moderate to good yields using this procedure. A radical pathway involving the acyl radical has been suggested.

Cobalt-Catalyzed Remote C-4 Functionalization of 8-Aminoquinoline Amides with Ethers via C-H Activation under Visible-Light Irradiation. Access to α-Heteroarylated Ether Derivatives.

A cobalt-catalyzed selective remote C-4 alkylation of 8-aminoquinoline amides via C-H activation under irradiation with a CFL lamp in the presence of eosin Y at room temperature has been achieved. A series of pharmaceutically important C-4 quinoline amide-substituted ether derivatives has been obtained by this procedure. The C-4 functionalization of quinoline amides with inert ether is of much significance and was not reported earlier.

Transition Metal- and Oxidant-Free Base-Mediated Selenation of Bicyclic Arenes at Room Temperature.

Bicyclic arenyl selenides are of much importance because of their pharmaceutical applications. A simple method for their synthesis has been developed by a reaction of 2-naphthol and styrenyl selenocyanate/diaryl diselenide in the presence of a base at room temperature. The selenation occurs exclusively at the 1-position of 2-naphthol unit. The reactions are relatively fast (2-4 h) and high yielding. A library of substituted naphthyl styrenyl and naphthyl aryl selenides are obtained by this procedure.

Transition-Metal-Free Iodine Catalyzed Selenocayanation of Styrenyl Bromides and an Easy Access to Benzoselenophenes via Intermediacy of Styrenyl Selenocyanate.

A convenient procedure has been developed for the synthesis of styrenyl selenocyanates and benzoselenophenes from readily available styrenyl bromides by reaction with potassium selenocyanate in the presence of iodine under specified conditions. A series of both compounds have been obtained by this procedure. The synthesis of styrenyl selenocyanates has not been previously reported, and thus this method is of much significance.

Palladium-Catalyzed Norbornene-Mediated Tandem ortho-C-H-Amination/ipso-C-I-Cyanation of Iodoarenes: Regiospecific Synthesis of 2-Aminobenzonitrile.

Efficient tandem ortho-C-H-amination/ipso-cyanation of iodoarenes was accomplished under a norbornene-mediated Pd-catalyzed process. A series of functionalized 2-aminobenzonitriles with much potential in the pharmaceutical industry were obtained by this protocol. This strategy was successfully employed for substitution with two cyano and four amino functionalities in an arene unit in one step under specified conditions.

Ascorbic Acid Promoted Oxidative Arylation of Vinyl Arenes to 2-Aryl Acetophenones without Irradiation at Room Temperature under Aerobic Conditions.

A convenient and general protocol for oxidative arylation of vinyl arenes by aryl radicals generated in situ from arene diazonium fluoroborates promoted by ascorbic acid in air at room temperature has been developed in the absence of any additive and visible light irradiation. A series of diversely substituted 2-aryl acetophenones have been obtained in good yields by this procedure.

Cobalt-catalyzed intermolecular C(sp(2))-O cross-coupling.

Cobalt(II)-catalyzed C(sp(2) )O cross-coupling between aryl/heteroaryl alcohols and vinyl/aryl halides in the presence of Cu(I) has been achieved under ligand-free conditions. In this reaction, copper plays a significant role in transmetalation rather than being directly involved in the CO coupling. This unique Co/Cu-dual catalyst system provides an easy access to a library of aryl-vinyl, heteroaryl-styryl, aryl-aryl, and heteroaryl-heteroaryl ethers in the absence of any ligand or additive.

A co-operative Ni-Cu system for Csp-Csp and Csp-Csp(2) cross-coupling providing a direct access to unsymmetrical 1,3-diynes and en-ynes.

An efficient cross-coupling of alkynes with alkynyl and alkenyl halides catalysed by a Ni-Cu system without any ligand has been achieved. The reaction is suggested to proceed by Ni(0) catalysis assisted by Cu(I). A series of functionalised diaryl, aryl-alkyl, aryl-heteroaryl, diheteroaryl 1,3-di-ynes and en-ynes are obtained in high yields.

A direct synthesis of selenophenes by Cu-catalyzed one-pot addition of a selenium moiety to (E,E)-1,3-dienyl bromides and subsequent nucleophilic cyclization.

An efficient protocol for the synthesis of selenophenes and selanyl selenophenes has been achieved by a simple one-pot reaction of 1,3-dienyl bromides and 1,3-dienyl-gem-dibromides respectively with KSeCN catalyzed by CuO nanoparticles. Several aryl, alkenyl, heteroaryl, and alkyl substituted selenophenes were obtained with a broad array of functional group tolerance. This is found to be a general methodology for chalcogenophenes being effective for the synthesis of thiophenes too.

tert-Butyl nitrite mediated regiospecific nitration of (E)-azoarenes through palladium-catalyzed directed C-H activation.

An efficient protocol for the Pd-catalyzed regiospecific ortho-nitration of (E)-azoarenes has been achieved for the first time using tBuONO as a nitrating agent under atmospheric oxygen. A series of both symmetrical and unsymmetrical azoarenes were nitrated efficiently by this procedure providing excellent chemo- and regioselectivity and compatibility with a broad array of functional groups.

Cu-catalyzed Fe-driven C(sp)-C(sp) and C(s)p-C(sp2) cross-coupling: an access to 1,3-diynes and 1,3-enynes.

An efficient Csp-Csp cross-coupling of alkynyl bromide and pinacol ester of alkynyl boronic acid catalyzed by CuFe2O4 nanoparticles has been accomplished in dimethyl carbonate to produce unsymmetric 1,3-diynes. This protocol is also extended for the Csp-Csp2 coupling of alkynyl bromide and alkenyl boronic acid to provide conjugated 1,3-enynes. The aliphatic, aromatic, and heteroaromatic alkynes couple with various substituted alkynyl/alkenyl boronates/boronic acids by this procedure to furnish a library of 1,3-diynes and enynes in high yields. The catalyst was easily separated by an external magnet and recycled 10 times.