Structural and Spectroscopic Properties of Isoconazole and Bifonazole-Experimental and Theoretical Studies.

The paper compares the experimental FT-IR, UV-vis, and 1H NMR spectra of isoconazole and bifonazole with the density functional theory (DFT) calculations using different functionals. The results were compared with previously reported data related to their analogue, posaconazole. The analysis of calculated IR spectra with use of CAM-B3LYP (isoconazole) or B3LYP (bifonazole) functionals shows good accordance with the experimental IR spectrum. The best compatibility between the experimental and theoretical UV spectra was observed with the use of B3LYP or wB97XD functionals for isoconazole or bifonazole, respectively. The reason for the difference in the UV-vis spectra of isoconazole and bifonazole was discussed based on linear response time-dependent DFT and natural bond orbital methods. The calculated 1H NMR spectrum shows that the DFT formalism, particularly the B3LYP functional, give an accurate description of the isoconazole and bifonazole chemical shifts.

Structure and Oligonucleotide Binding Efficiency of Differently Prepared Click Chemistry-Type DNA Microarray Slides Based on 3-Azidopropyltrimethoxysilane.

The structural characterization of glass slides surface-modified with 3-azidopropyltrimethoxysilane and used for anchoring nucleic acids, resulting in the so-called DNA microarrays, is presented. Depending on the silanization conditions, the slides were found to show different oligonucleotide binding efficiency, thus, an attempt was made to correlate this efficiency with the structural characteristics of the silane layers. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and X-ray reflectometry (XRR) measurements provided information on the surface topography, chemical composition and thickness of the silane films, respectively. The surface for which the best oligonucleotides binding efficiency is observed, has been found to consist of a densely-packed silane layer, decorated with a high-number of additional clusters that are believed to host exposed azide groups.

The identity and methylation status of the first transcribed nucleotide in eukaryotic mRNA 5' cap modulates protein expression in living cells.

7-Methylguanosine 5' cap on mRNA is necessary for efficient protein expression in vitro and in vivo. Recent studies revealed structural diversity of endogenous mRNA caps, which carry different 5'-terminal nucleotides and additional methylations (2'-O-methylation and m6A). Currently available 5'-capping methods do not address this diversity. We report trinucleotide 5' cap analogs (m7GpppN(m)pG), which are utilized by RNA polymerase T7 to initiate transcription from templates carrying Φ6.5 promoter and enable production of mRNAs differing in the identity of the first transcribed nucleotide (N = A, m6A, G, C, U) and its methylation status (±2'-O-methylation). HPLC-purified mRNAs carrying these 5' caps were used to study protein expression in three mammalian cell lines (3T3-L1, HeLa and JAWS II). The highest expression was observed for mRNAs carrying 5'-terminal A/Am and m6Am, whereas the lowest was observed for G and Gm. The mRNAs carrying 2'-O-methyl at the first transcribed nucleotide (cap 1) had significantly higher expression than unmethylated counterparts (cap 0) only in JAWS II dendritic cells. Further experiments indicated that the mRNA expression characteristic does not correlate with affinity for translation initiation factor 4E or in vitro susceptibility to decapping, but instead depends on mRNA purity and the immune state of the cells.

Silica Surface Modification and Its Application in Permanent Link with Nucleic Acids.

In this paper, the Pt-catalyzed hydrosilylation of hydroxyl ethers is described. Various bifunctional alkoxysilanes were obtained and applied in O-silylation of free hydroxyl groups on the silica surface. These modified solid materials have been used as excellent supports for linking synthetic nucleic acids. Nucleic acids permanently attached to the solid surface were tested in hybridization with complementary fluorescence-labeled sequences. Detection of nucleic acids anchored to the solid support was performed by fluorescence microscopy after hybridization.

2-Pyridinyl Thermolabile Groups as General Protectants for Hydroxyl, Phosphate, and Carboxyl Functions.

Application of 2-pyridinyl thermolabile protecting groups (2-PyTPGs) for protection of hydroxyl, phosphate, and carboxyl functions is presented in this unit. Their characteristic feature is a unique removal process following the intramolecular cyclization mechanism and induced only by temperature rise. Deprotection rate of 2-PyTPGs is dependent on certain parameters, such as solvent (aqueous or non-aqueous medium), pH values, and electron distribution in a pyridine ring. The presented approach pertains not only to protecting groups but also to an advanced system of controlling certain properties of 2-pyridinyl derivatives. We improved the "chemical switch" method, allowing us to regulate the protecting group stability by inversing the electron distribution in 2-PyTPG. Together with pH values manipulation, this allows us to regulate the protecting group stability. Moreover, phosphite cyclization to oxazaphospholidine provides a very stable but easily reversible tool for phosphate protection/modifications. For all TPGs we confirmed their utility in a system of protecting groups. This concept can contribute to designing the general protecting group that could be useful in bioorganic chemistry. © 2017 by John Wiley & Sons, Inc.

New functionality of RNAComposer: an application to shape the axis of miR160 precursor structure.

RNAComposer is a fully automated, web-interfaced system for RNA 3D structure prediction, freely available at http://rnacomposer.cs.put.poznan.pl/ and http://rnacomposer.ibch.poznan.pl/. Its main components are: manually curated database of RNA 3D structure elements, highly efficient computational engine and user-friendly web application. In this paper, we demonstrate how the latest additions to the system allow the user to significantly affect the process of 3D model composition on several computational levels. Although in general our method is based on the knowledge of secondary structure topology, currently the RNAComposer offers a choice of six incorporated programs for secondary structure prediction. It also allows to apply a conditional search in the database of 3D structure elements and introduce user-provided elements into the final 3D model. This new functionality contributes to a significant improvement of the predicted 3D model reliability and it facilitates a better model adjustment to the experimental data. This is exemplified based on the RNAComposer application for modelling of the 3D structures of precursors of the miR160 family members.

The "Clickable" Method for Oligonucleotide Immobilization Onto Azide-Functionalized Microarrays.

The DNA microarray technique was supposed to help identifying and analyzing the expression level of tens of thousands of genes in the whole genome. But there is a serious problem concerning fabrication of the microarrays by chemical synthesis, such as specific and efficient linking of probes to a solid support. Therefore, we reckon that applying "click" chemistry to covalently anchor oligonucleotides on chemically modified supports may help construct microarrays in applications such as gene identification. Silanization of the glass support with organofunctional silane makes it possible to link azide groups on glass surface and the nucleic acid probe that is equipped with a pentynyl group. This is followed by direct spotting of the nucleic acid on the azide-modified glass support in the presence of copper ions, and this is a frequently applied method of "click" chemistry.

Investigations on Synperiplanar and Antiperiplanar Isomers of Losartan: Theoretical and Experimental NMR Studies.

Losartan inhibits the renin-angiotensin-aldosterone system by blocking the angiotensin II receptor. It is commonly used in cardiovascular diseases, such as hypertension. Several publications applied the ab initio and density functional theory methods to investigate the molecule of losartan. Only in one of them were the nuclear magnetic resonance spectra calculations carried out, and their results were correlated with the experimental values. The authors focused their attention on calculations of the anion form of losartan, taking into consideration both its synperiplanar and antiperiplanar configurations. Coefficients of determination and mean absolute deviation parameters were calculated for the experimental and calculated chemical shifts for every used basis set. They showed a noticeably stronger correlation for the anti-isomers than for the syn-isomers. Moreover, the solvation model increased the value of this parameter. The results of calculations confirmed that an anti-conformation of the analyte seems to be the preferred one, and such an orientation might be most potent within the receptor cavity, which is in agreement with the results of previous studies.

RNAssess--a web server for quality assessment of RNA 3D structures.

Nowadays, various methodologies can be applied to model RNA 3D structure. Thus, the plausible quality assessment of 3D models has a fundamental impact on the progress of structural bioinformatics. Here, we present RNAssess server, a novel tool dedicated to visual evaluation of RNA 3D models in the context of the known reference structure for a wide range of accuracy levels (from atomic to the whole molecule perspective). The proposed server is based on the concept of local neighborhood, defined as a set of atoms observed within a sphere localized around a central atom of a particular residue. A distinctive feature of our server is the ability to perform simultaneous visual analysis of the model-reference structure coherence. RNAssess supports the quality assessment through delivering both static and interactive visualizations that allows an easy identification of native-like models and/or chosen structural regions of the analyzed molecule. A combination of results provided by RNAssess allows us to rank analyzed models. RNAssess offers new route to a fast and efficient 3D model evaluation suitable for the RNA-Puzzles challenge. The proposed automated tool is implemented as a free and open to all users web server with an user-friendly interface and can be accessed at: http://rnassess.cs.put.poznan.pl/.

RNAlyzer--novel approach for quality analysis of RNA structural models.

The continuously increasing amount of RNA sequence and experimentally determined 3D structure data drives the development of computational methods supporting exploration of these data. Contemporary functional analysis of RNA molecules, such as ribozymes or riboswitches, covers various issues, among which tertiary structure modeling becomes more and more important. A growing number of tools to model and predict RNA structure calls for an evaluation of these tools and the quality of outcomes their produce. Thus, the development of reliable methods designed to meet this need is relevant in the context of RNA tertiary structure analysis and can highly influence the quality and usefulness of RNA tertiary structure prediction in the nearest future. Here, we present RNAlyzer-a computational method for comparison of RNA 3D models with the reference structure and for discrimination between the correct and incorrect models. Our approach is based on the idea of local neighborhood, defined as a set of atoms included in the sphere centered around a user-defined atom. A unique feature of the RNAlyzer is the simultaneous visualization of the model-reference structure distance at different levels of detail, from the individual residues to the entire molecules.

Oxidation of H-phosphonates with iodine by intramolecular support of a 2-pyridyl thermolabile protecting group.

Acceleration of H-phosphonate diester oxidation with iodine accompanied by a thermolabile protecting group (TPG) is presented. It is shown that the intermediate product of this reaction is an oxazaphospholidine oxide which forms a phosphate diester only when a 2-pyridyl TPG is applied. The intermediate product is formed with exocyclic nitrogen. The absolute configurations of phosphorothioate diesters, H-phosphonate diesters, and oxazaphospholidine oxides were determined. (31)P NMR spectroscopy was used to evaluate the relationship between chemical shift and absolute configuration at the phosphorus center of H-phosphonate diesters and oxazaphospholidine oxides.

First order derivative spectrophotometric and HPLC methods for determination of moexipril hydrochloride in the pure form, pharmeceutical formulations and evaluation of its stability.

A rapid, linear (over a concentration range of 0.00012-0.0012% and with correlation coefficient r = 0.999), accurate (an average recovery of 100%), precise (an average standard deviation < 1.5%) and economical first derivative UV spectrophotometric assay method (lambda(max) = 238 nm) was developed for the determination of moexipril hydrochloride (MOXL) in a pharmaceutical formulation. The method was investigated for its utility for the determination of MOXL in commercially available tablets and as a stability-indicative assay in solid state. The results obtained by means of the investigated method were statistically compared (t-Student test and F-Snedecor test) with the results obtained by means of the reference method--HPLC, which evidenced that both methods are equally precise and accurate. It was finally concluded that first derivative UV spectrophotometry is selective with reference to excipients used for the tablets' formulation, however, it is not selective with reference to MOXL degradation products.

Application of click chemistry to the production of DNA microarrays.

The copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction was applied as the novel method of DNA immobilization on a modified solid support. The CuAAC click reaction enables the covalent binding of DNA modified with pentynyl groups at its 5'-end to azide-loaded slides. Click microarrays were produced using this approach and successfully employed in biological/model experiments.