Cationic Serine-Based Gemini Surfactant:Monoolein Aggregates as Viable and Efficacious Agents for DNA Complexation and Compaction: A Cytotoxicity and Physicochemical Assessment.

Cationic gemini surfactants have emerged as potential gene delivery agents as they can co-assemble with DNA due to a strong electrostatic association. Commonly, DNA complexation is enhanced by the inclusion of a helper lipid (HL), which also plays a key role in transfection efficiency. The formation of lipoplexes, used as non-viral vectors for transfection, through electrostatic and hydrophobic interactions is affected by various physicochemical parameters, such as cationic surfactant:HL molar ratio, (+/-) charge ratio, and the morphological structure of the lipoplexes. Herein, we investigated the DNA complexation ability of mixtures of serine-based gemini surfactants, (nSer)2N5, and monoolein (MO) as a helper lipid. The micelle-forming serine surfactants contain long lipophilic chains (12 to 18 C atoms) and a five CH2 spacer, both linked to the nitrogen atoms of the serine residues by amine linkages. The (nSer)2N5:MO aggregates are non-cytotoxic up to 35-90 µM, depending on surfactant and surfactant/MO mixing ratio, and in general, higher MO content and longer surfactant chain length tend to promote higher cell viability. All systems efficaciously complex DNA, but the (18Ser)2N5:MO one clearly stands as the best-performing one. Incorporating MO into the serine surfactant system affects the morphology and size distribution of the formed mixed aggregates. In the low concentration regime, gemini-MO systems aggregate in the form of vesicles, while at high concentrations the formation of a lamellar liquid crystalline phase is observed. This suggests that lipoplexes might share a similar bilayer-based structure.

Recent advances and strategies for nanocarrier-mediated topical therapy and theranostic for posterior eye disease.

Posterior eye disorders, such as age-related macular degeneration, diabetic retinopathy, and glaucoma, have a significant impact on human quality of life and are the primary cause of age-related retinal diseases among adults. There is a pressing need for innovative topical approaches to treat posterior eye disorders, as current methods often rely on invasive procedures with inherent risks. Limited success was attained in the realm of topical ophthalmic delivery through non-invasive means. Additionally, there exists a dearth of literature that delves into the potential of this approach for drug delivery and theranostic purposes, or that offers comprehensive design strategies for nanocarrier developers to surmount the significant physiological ocular barriers. This review offers a thorough and up-to-date state-of-the-art overview of 40 studies on therapeutic loaded nanocarriers and theranostic devices that, to the best of our knowledge, represent all successful works that reached posterior eye segments through a topical non-invasive administration. Most importantly, based on the successful literature studies, this review provides a comprehensive summary of the potential design strategies that can be implemented during nanocarrier development to overcome each ocular barrier.

Design of a lipid nano-delivery system containing recombinant Candida albicans chitinase 3 as a potential vaccine against fungal infections.

Opportunistic fungi cause lethal systemic infections and impose high medical costs to health systems. The World Health Organization has recognized the importance of fungal infections, including them in its global priority list guiding research, development, and discovery of new therapeutic approaches. Fungal vaccine development has been proposed as one of the treatment and prevention strategies in the last decade. In this study, we present the design of a lipid antigen delivery system based on Dioctadecyldimethylammonium bromide: Monoolein (DODAB: MO) containing recombinant Candida albicans Chitinase 3 (Cht3) for modulation the immune response against fungal infections. Several DODAB:MO liposomes containing Cht3 were prepared and those prepared by the incubation method and containing 5 µg/mL Cht3 were selected due to their favorable size, ζ-potential and stability, suited for antigen delivery applications. The encapsulation of Cht3 in these liposomes resulted in a significant increase in cellular uptake compared to empty liposomes, demonstrating their efficacy in delivering the antigen. Moreover, the liposomes proved to be safe for use in immunization procedures. Subcutaneous administration of Cht3 liposomes elicited a Th1/Th17 immune response profile, associated with the production of high levels of antibodies against Cht3. These antibodies recognized both the native and the recombinant forms of the protein, opsonizing mother-yeast at the cell scars, which has the potential to disrupt cell separation and hinder yeast growth. The findings suggest that the designed lipid antigen delivery system shows promise as a potential candidate for enhancing immune responses against fungal infections, offering a valuable strategy for future fungal vaccine development.

Combined Inhibition of FOSL-1 and YAP Using siRNA-Lipoplexes Reduces the Growth of Pancreatic Tumor.

Pancreatic cancer evades most of the current therapies and there is an urgent need for new treatments that could efficiently eliminate this aggressive tumor, such as the blocking of routes driving cell proliferation. In this work, we propose the use of small interfering RNA (siRNA) to inhibit the combined expression of FOSL-1 and YAP, two signaling proteins related with tumor cell proliferation and survival. To improve the efficacy of cell transfection, DODAB:MO (1:2) liposomes were used as siRNA nanocarriers, forming a complex denominated siRNA-lipoplexes. Liposomes and lipoplexes (carrying two siRNA for each targeted protein, or the combination of four siRNAs) were physico-chemically and biologically characterized. They showed very good biocompatibility and stability. The efficient targeting of FOSL-1 and YAP expression at both mRNA and protein levels was first proved in vitro using mouse pancreatic tumoral cell lines (KRASG12V and p53 knockout), followed by in vivo studies using subcutaneous allografts on mice. The peri-tumoral injection of lipoplexes lead to a significant decrease in the tumor growth in both Athymic Nude-Foxn1nu and C57BL/6 mice, mainly in those receiving the combination of four siRNAs, targeting both YAP and FOSL-1. These results open a new perspective to overcome the fast tumor progression in pancreatic cancer.

Prediction of paclitaxel pharmacokinetic based on in vitro studies: Interaction with membrane models and human serum albumin.

Interactions of paclitaxel (PTX) with models mimicking biological interfaces (lipid membranes and serum albumin, HSA) were investigated to test the hypothesis that the set of in vitro assays proposed can be used to predict some aspects of drug pharmacokinetics (PK). PTX membrane partitioning was studied by derivative spectrophotometry; PTX effect on membrane biophysics was evaluated by dynamic light scattering, fluorescence anisotropy, atomic force microscopy and synchrotron small/wide-angle X-ray scattering; PTX distribution/molecular orientation in membranes was assessed by steady-state/time-resolved fluorescence and computer simulations. PTX binding to HSA was studied by fluorescence quenching, derivative spectrophotometry and dynamic/electrophoretic light scattering. PTX high membrane partitioning is consistent with its efficacy crossing cellular membranes and its off-target distribution. PTX is closely located in the membrane phospholipids headgroups, also interacting with the hydrophobic chains, and causes a major distortion of the alignment of the membrane phospholipids, which, together with its fluidizing effect, justifies some of its cellular toxic effects. PTX binds strongly to HSA, which is consistent with its reduced distribution in target tissues and toxicity by bioaccumulation. In conclusion, the described set of biomimetic models and techniques has the potential for early prediction of PK issues, alerting for the required drug optimizations, potentially minimizing the number of animal tests used in the drug development process.

Protective effect of antigen delivery using monoolein-based liposomes in experimental hematogenously disseminated candidiasis.

UNLABELLED: We evaluated the potential of a liposomal antigen delivery system (ADS) containing Candida albicans cell wall surface proteins (CWSP) in mediating protection against systemic candidiasis. Treatment of bone-marrow-derived dendritic cells with CWSP-loaded dioctadecyldimethylammonium bromide:monoolein (DODAB:MO) liposomes enhanced and prolonged their activation comparatively to free antigen, indicating that liposome-entrapped CWSP were released more sustainable. Therefore, we immunized mice with CWSP either in a free form or loaded into two different DODAB:MO liposome formulations, respectively designated as ADS1 and ADS2, prior to intravenous C. albicans infection. Immunization with ADS1, but not with ADS2, conferred significant protection to infected mice, comparatively to immunization with CWSP or empty liposomes as control. ADS1-immunized mice presented significantly higher serum levels of C. albicans-specific antibodies that enhanced phagocytosis of this fungus. In these mice, a mixed cytokine production profile was observed encompassing IFN-γ, IL-4, IL-17A and IL-10. Nevertheless, only production of IL-4, IL-17 and IL-10 was higher than in controls. In this study we demonstrated that DODAB:MO liposomes enhance the immunogenicity of C. albicans antigens and host protection in a murine model of systemic candidiasis. Therefore, this liposomal adjuvant could be a promising candidate to assess in vaccination against this pathogenic fungus. STATEMENT OF SIGNIFICANCE: This work describes the immunomodulation capacity of the previously validated antigen delivery system (ADS) composed by dioctadecyldimethylammonium bromide (DODAB) and monoolein (MO) lipids incorporating the cell wall surface proteins (CWSP) from C. albicans. Here, we not only present the ability of this system in facilitating antigen uptake by DCs in vitro, but also that this system induces higher levels of pro-inflammatory cytokines and opsonizing specific IgG antibodies in serum of mice immunized subcutaneously. We show that the ADS are efficient nanocarrier and modulate the immune response against intravenous C. albicans infection favoring mouse protection. In sum, we show that the incorporation of C. albicans antigens in DODAB:MO nanocarries are a promising vaccine strategy against C. albicans fungal infection.

Stealth monoolein-based nanocarriers for delivery of siRNA to cancer cells.

While the delivery of small interfering RNAs (siRNAs) is an attractive strategy to treat several clinical conditions, siRNA-nanocarriers' stability after intravenous administration is still a major obstacle for the development of RNA-interference based therapies. But, although the need for stability is well recognized, the notion that strong stabilization can decrease nanocarriers' efficiency is sometimes neglected. In this work we evaluated two stealth functionalization strategies to stabilize the previously validated dioctadecyldimethylammonium bromide (DODAB):monoolein (MO) siRNA-lipoplexes. The nanocarriers were pre- and post-pegylated, forming vectors with different stabilities in biological fluids. The stealth nanocarriers' behavior was tested under biological mimetic conditions, as the production of stable siRNA-lipoplexes is determinant to achieve efficient intravenous siRNA delivery to cancer cells. Upon incubation in human serum for 2h, by fluorescence Single Particle Tracking microscopy, PEG-coated lipoplexes were found to have better colloidal stability as they could maintain a relatively stable size. In addition, using fluorescence fluctuation spectroscopy, post-pegylation also proved to avoid siRNA dissociation from the nanocarriers in human serum. Concomitantly it was found that PEG-coated lipoplexes improved cellular uptake and transfection efficiency in H1299 cells, and had the ability to silence BCR-ABL, affecting the survival of K562 cells. Based on an efficient cellular internalization, good silencing effect, good siRNA retention and good colloidal stability in human serum, DODAB:MO (2:1) siRNA-lipoplexes coated with PEG-Cer are considered promising nanocarriers for further in vivo validation. STATEMENT OF SIGNIFICANCE: This work describes two stealth functionalization strategies for the stabilization of the previously validated dioctadecyldimethylammonium bromide (DODAB):monoolein (MO) siRNA-lipoplexes. These nanocarriers are capable of efficiently incorporating and delivering siRNA molecules to cells in order to silence genes whose expression is implicated in a pathological condition. The main objective was to functionalize these nanocarriers with a coating conferring protection to siRNA in blood without compromising its efficient delivery to cancer cells, validating the potential of DODAB:MO (2:1) siRNA-lipoplexes as therapeutic vectors. We show that the stealth strategy is determinant to achieve a stable and efficient nanocarrier, and that DODAB:MO mixtures have a very promising potential for systemic siRNA delivery to leukemic cells.

Importance of contact lens power and thickness in oxygen transmissibility.

PURPOSE: The aim of this work was to study the central and peripheral thickness of several contact lenses (CL) with different powers and analyze how thickness variation affects CL oxygen transmissibility. METHODS: Four daily disposable and five monthly or biweekly CL were studied. The powers of each CL were: the maximum negative power of each brand; -6.00 D; -3.00 D; zero power (-0.25 D or -0.50 D), +3.00 D and +6.00 D. Central and peripheral thicknesses were measured with an electronic thickness gauge. Each lens was measured five times (central and 3mm paracentral) and the mean value was considered. Using the values of oxygen permeability given by the manufacturers and the measured thicknesses, the variation of oxygen transmissibility with lens power was determined. RESULTS: For monthly or biweekly lenses, central thickness changed between 0.061 ± 0.002 mm and 0.243 ± 0.002 mm, and peripheral thickness varied between 0.084 ± 0.002 mm and 0.231 ± 0.015 mm. Daily disposable lenses showed central values ranging between 0.056 ± 0.0016 mm and 0.205 ± 0.002 mm and peripheral values between 0.108 ± 0.05 and 0.232 ± 0.011 mm. Oxygen transmissibility (in units) of monthly or biweekly CL ranged between 39.4 ± 0.3 and 246.0 ± 14.4 and for daily disposable lenses the values range between 9.5 ± 0.5 and 178.1 ± 5.1. CONCLUSIONS: The central and peripheral thicknesses change significantly when considering the CL power and this has a significant impact on the oxygen transmissibility. Eyecare practitioners must have this fact in account when high power plus or minus lenses are fitted or when continuous wear is considered.

DODAB:monoolein liposomes containing Candida albicans cell wall surface proteins: a novel adjuvant and delivery system.

We describe the preparation and characterization of DODAB:MO-based liposomes and demonstrate their adjuvant potential and use in antigen delivery. Liposomes loaded with Candida albicans proteins assembled as stable negatively charged spherical nanoparticles with a mean size of 280 nm. High adsorption efficiency (91.0 ± 9.0%) is attained with high lipid concentrations. The nanoparticles were non-toxic, avidly taken up by macrophage cells and accumulated in membrane rich regions with an internalization time of 20 min. Immunized mice displayed strong humoral and cell-mediated immune responses, producing antibodies (IgGs) against specific cell wall proteins, Cht3p and Xog1p. DODAB:MO-based liposomes loaded with C. albicans proteins have an excellent immunogenic potential and can be explored for the development of an immunoprotective strategy against Candida infections.

Surface roughness and refractive index changes in contact lens induced by lens care systems.

PURPOSE: The aim of this study was to analyze the influence of different lens care systems in surface roughness and refractive index (RI) of contact lenses (CL). This information provides us with a better understanding of how care solutions affect CL materials. METHODS: Several CL and three commercially available and appropriate lens care solutions were used (two polyhexamethylene biguanide and one hydrogen peroxide care systems). Lenses were immersed in the lens care systems, and then measurements with CLR 12-70 digital automated refractometer and atomic force microscopy analysis on Tapping mode were recorded. The measurements were performed before and after the lenses were immersed in each care solution. RESULTS: Significant changes were observed on the CL materials when exposed to lens care systems. All the materials changed, to a greater or lesser extent, their roughness and RI, after being immersed in the different solutions. The water content varied between 0% (Nelfilcon A in ReNu Multiplus, Senofilcon A in AOSEPT Plus, and Methafilcon A in Solocare Aqua) and 4.1% (Hilafilcon B in Solocare Aqua) The higher change in roughness was obtained with ReNu Multiplus in the lens Comfilcon A (with an increase of 27.2 nm) and Senofilcon A (with an increase of 16.7 nm). CONCLUSION: This study suggests that lens care systems play an important role in surface roughness and RI of CL.

Comparison of IgA, TNF-α and surface tension of the tear film in two different times of the day.

PURPOSE: The main goal was to study the biochemical composition of the tear film in two different times of the day. METHODS: Tear samples were collected from 10 individuals, non contact lenses wearers, from the university population without pathologies. To assess daily variations in the tear film, samples were collected twice in the day, one early in the morning and another in the evening using capillary tubes. Tear protein profile was analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), tumor necrosis factor α (TNF-α) and immunoglobulin A (IgA) were quantified by Enzyme-Linked ImmunoSorbent Assay (ELISA). Tear film stability was obtained through measurements of Non-Invasive Break Up Time and tear surface tension was measured by obtaining the Langmuir isotherms. RESULTS: The stability of the tear film was higher in the morning than in the afternoon; corresponding to a higher value of surface tension in the afternoon. Protein electrophoresis tear profile is variable during the day as IgA concentration decreased from morning to afternoon (p<0.05). TNF-α concentration also decreased, but there were not significant statistical differences (p=0.089). CONCLUSION: We concluded that there are daily variations in the composition and properties of the tear film, indicating that changes occur without being caused by contact lenses wear or by the presence of ocular and systemic pathologies. Presence of TNF-α is not a direct indication of inflammatory pathology, since this cytokine was identified in relatively high amounts in subjects without inflammatory pathology.

Aggregation behavior of aqueous dioctadecyldimethylammonium bromide/monoolein mixtures: a multitechnique investigation on the influence of composition and temperature.

A recently described non-viral gene delivery system [dioctadecyldimethylammonium bromide (DODAB)/monoolein (MO)] has been studied in detail to improve knowledge on the interactions between lamellar (DODAB) and non-lamellar-forming (MO) lipids, as a means to enhance their final cell transfection efficiency. Indeed, the morphology, fluidity, and size of these cationic surfactant/neutral lipid mixtures play an important role in the ability of these systems to complex nucleic acids. The different techniques used in this work, namely dynamic light scattering (DLS), fluorescence spectroscopy, differential scanning calorimetry (DSC), cryogenic transmission electron microscopy (cryo-TEM), light microscopy (LM), and surface pressure-area isotherms, allowed fully characterization of the phase behavior and aggregate morphology of DODAB/MO mixtures at different molar ratios. Overall, the results indicate that the final morphology of DODAB/MO aggregates depends on the balance between the tendency of DODAB to form zero-curvature bilayer structures and the propensity of MO to form non-bilayer structures with negative curvature. These results also show that in the MO-rich region, an increase in temperature has a similar effect on aggregate morphology as an increase in MO concentration.

Study of the release of a microencapsulated acid dye in polyamide dyeing using mixed cationic liposomes.

The main objective of this work was to increase the retarding effect of the acid dye Telon(®) Blue RR (C.I. Acid Blue 62; DyStar, Frankfurt, Germany) release on polyamide fibres dyeing by encapsulation of the dye in liposomes as an alternative to synthetic auxiliaries, in order to reduce effluent pollution. The retarding effect achieved with the use of mixed cationic liposomes of dioctadecyldimethylammonium bromide (DODAB)/soybean lecithin (containing a 10% molar fraction of DODAB) was better in comparison with either pure soybean lecithin liposomes or synthetic auxiliaries. The retarding effect of liposomes on the dye release was analysed through changes in the absorption and fluorescence spectra of the acid dye at different conditions. The effect of temperature (in the range of 25 °C - 70 °C) on the spectroscopic behaviour of the dye in the absence and in presence of polyamide was also studied, in order to simulate the dyeing conditions. Exhaustion curves obtained in dyeing experiments showed that, below 45 °C, the retarding effect of the mixed liposomes (lecithin/DODAB (9:1)) was similar to that of the auxiliaries, but better than the one of pure lecithin liposomes. At higher temperatures (above 45 °C), the system lecithin/DODAB presents a better performance, achieving a higher final exhaustion level when compared with the commercial leveling agent without losing the smoothing effect of lecithin.

Soft contact lens surface profile by atomic force microscopy.

PURPOSE: This study was designed to qualitatively and quantitatively characterize the surface morphology of four unworn conventional hydrogel contact lenses (omafilcon, hioxifilcon, nelfilcon A, and ocufilcon B) and two silicone-hydrogel contact lenses (senofilcon A and comfilcon A) without surface treatment. METHODS: Surface roughness was assessed using atomic force microscopy in Tapping Mode to determine the representative roughness parameters mean surface roughness (Ra), mean square roughness (Rms), kurtosis (Rku), and skewness (Rsk). To date, these last two parameters have not been used to characterize contact lens surfaces. Rku provides information on the distribution of spikes above and below the mean line, and Rsk provides information about the asymmetric roughness of surfaces. The surface topography of the lenses was also mapped in detail. RESULTS: In all the lenses, higher Ra and Rms values were obtained when larger surface areas were examined. The daily replacement contact lenses (nelfilcon A and ocufilcon B) showed the highest Ra and Rms values but according to their Rku scores, their surface profiles were less spiky than the remaining lenses. On the contrary, the lowest Ra and Rms values were recorded for comfilcon A and omafilcon A, which also exhibited the spikiest surface profiles. All the materials except the hioxifilcon showed a predominance of peaks (Rsk >0) over troughs. CONCLUSIONS: The shape parameters Rku and Rsk are useful for characterizing contact lens surfaces, because they provide different yet complementary information to that offered by Ra and Rms. Precise knowledge of the shape profile of a contact lens surface will give an idea of its susceptibility to deposit formation or colonization by microorganisms.

White light interferometry to characterize the hydrogel contact lens surface.

PURPOSE: The aim of this study was to characterize, qualitatively and quantitatively, the surface morphology of four unworn conventional hydrogel contact lenses (Omafilcon, Hioxifilcon-based, Nefilcon A and Ocufilcon B) by White Light Optical Profiling (WLOP). WLOP is an ideal technique for sampling larger areas as well as for higher measurement speed compared with other topography techniques used in contact lens studies. METHODS: Surface roughness was assessed by WLOP in the Vertical Scanning Mode, with a Wyko NT1100, which is a non-contact optical profiling system that provides high vertical resolution. Representative roughness parameters, the Average Roughness (R(a)), Root-mean-square Roughness (R(ms)), and Maximum Roughness (R(max)), for areas of 625, 2500, 10829 and 67 646 microm(2) were calculated. RESULTS: Higher R(a), R(ms) and R(max) values were obtained for larger areas in all lenses. Daily disposable contact lenses (Nefilcon A and Ocufilcon B) presented the highest R(a), R(ms) and R(max) values, the larger changes in these parameters becoming apparent with the increase in the measured area. Differences between lenses were less obvious when data from 625 and 2500 microm(2) area were compared. CONCLUSIONS: Daily disposable contact lenses showed the highest roughness surface. Analyzing larger areas might be adequate to detect differences between lenses in terms of surface characteristics, which may not be so obvious if smaller areas are studied.

Changes in UV-visible transmittance of silicone-hydrogel contact lenses induced by wear.

PURPOSE: To evaluate the influence of wear of silicone-hydrogel contact lenses on lens ultraviolet and visible spectrum transmittance by studying several contact lenses before and after wear. METHOD: To investigate the ability of contact lenses to maintain their transmittance characteristics, we measured 104 different contact lenses in the ultraviolet (UV) and visible range from 200 to 700 nm, with a Shimadzu UV3101-PC UV-vis-NIR spectrophotometer equipped with an integrating sphere. The lenses used in this study were Acuvue Advance (Johnson & Johnson Vision Care, Inc.), Air Optix Night & Day (CIBA Vision), Air Optix (CIBA Vision), and PureVision (Bausch & Lomb). A conventional hydrogel contact lens was also tested, Acuvue (Johnson & Johnson Vision Care Inc.). RESULTS: Our study indicates that lenses that do not have UV absorbers incorporated into the polymer transmitted most of the UV radiation (UVR) before and after wear. The results of the statistical analysis show that for the UVC portion of the spectrum significant difference exists within the measurements obtained before and after wear for all the lenses, with the exception of PureVision. Acuvue Advance is the only material in which significant transmittance differences were observed in the visible spectral range. CONCLUSIONS: Transmittance is modified after contact lenses wear, probably due to the formation of biofilms on the contact lens surface, being more noticeable in the UVR region of the spectrum (200-400 nm). Silicone-hydrogel and conventional hydrogel contact lens materials that provide UVR protection (UV-blocker) maintain this property even after being worn. The changes observed in the visible spectrum seem not to have any implications in visual performance of silicone-hydrogel contact lenses.

Bacterial adhesion to worn silicone hydrogel contact lenses.

PURPOSE: The aim of this study was to, firstly, investigate whether silicone-hydrogel contact lenses (CL) are more or less susceptible to bacterial adhesion than conventional ones and, secondly, assess the influence of lens wear in the extent of bacterial adhesion. Four silicone-hydrogel CL (galyfilcon A, balafilcon A, lotrafilcon A, and lotrafilcon B) and one conventional hydrogel (etafilcon A) CL were tested. METHODS: Bacterial adhesion experiments were performed on unworn and worn CL using the strain Staphylococcus epidermidis 9142. Worn lenses were obtained from a group of 31 subjects fitted with a silicone-hydrogel CL in one eye and a conventional hydrogel CL as contralateral pair. These lenses were used on a daily basis in combination with a multipurpose lens care solution. Adhesion assays were carried out in a parallel plate flow chamber, followed by image analysis. Hydrophobicity, roughness, and topography of the lenses surfaces were assessed through contact angle measurements and atomic force microscopy. RESULTS: Unworn conventional and silicone-hydrogel CL were equally susceptible to bacterial adhesion of S. epidermidis. Conversely, worn conventional hydrogel (etafilcon A) were more prone to bacterial adhesion than worn silicone-hydrogel materials, which exhibited similar adhesion extents among them. The results also showed that the lens surface properties such as hydrophobicity, roughness, and surface topography changed during wear. The alteration of surface hydrophobicity of silicone and conventional hydrogel CL during wear had a great impact on lens bacterial adhesion susceptibility. Accordingly, balafilcon A becomes significantly less hydrophobic and less prone to bacterial adhesion after lens wear, whereas etafilcon A becomes more hydrophobic and also more susceptible to bacterial adhesion (p < 0.05). CONCLUSIONS: Worn silicone-hydrogel galyfilcon A, balafilcon A, lotrafilcon A, and lotrafilcon B are equally prone to microbial adhesion of S. epidermidis and generally less susceptible than the conventional hydrogel.

The influence of lens material and lens wear on the removal and viability of Staphylococcus epidermidis.

PURPOSE: The aim of this study was to evaluate the influence of lens material and lens wear on the removal capability of Staphylococcus epidermidis. Assessment of viability of remaining adhered bacteria was another goal of this work. Four silicone hydrogel materials (galyfilcon A, balafilcon A, lotrafilcon A, lotrafilcon B) and one conventional hydrogel material (etafilcon A) were assayed. METHODS: Detachment studies on S. epidermidis were carried out in a parallel plate flow chamber. Contact lenses (CLs) were fitted to the bottom of the flow chamber and a bacterial suspension was perfused into the system, promoting bacterial adhesion. Afterwards, detachment was stimulated using a multipurpose solution (MPS, ReNu Multiplus) and the percentage of removed bacteria estimated through microscopic observation and enumeration. Remaining adhered bacteria were stained with propidium iodide (PI) and enumerated in order to assess their viability. Additionally, the worn lenses were observed by confocal laser scanning microscopy (CLSM) to visualize bacterial distribution along the lens surfaces. RESULTS: Bacterial removal was significant (p<0.05) for both unworn and worn galyfilcon A and etafilcon A. Galyfilcon A exhibited a detachment percentage of 59.1 and 63.5 while etafilcon A of 62.6 and 69.3, both for unworn and worn lenses, respectively. As far as bacterial viability is concerned, it was found that worn lenses exhibit a superior amount of non-viable bacteria than unworn CLs. Images obtained by CLSM revealed an irregular bacterial distribution for all lens materials. CONCLUSIONS: It appears that surface and/or bulk structure of the lens material affects removal of S. epidermidis while CL wear influences their viability.

Vesicle-micelle transition in aqueous mixtures of the cationic dioctadecyldimethylammonium and octadecyltrimethylammonium bromide surfactants.

The vesicle-micelle transition in aqueous mixtures of dioctadecyldimethylammonium and octadecyltrimethylammonium bromide (DODAB and C(18)TAB) cationic surfactants, having respectively double and single chain, was investigated by differential scanning calorimetry (DSC), steady-state fluorescence, dynamic light scattering (DLS) and surface tension. The experiments performed at constant total surfactant concentration, up to 1.0 mM, reveal that these homologous surfactants mix together to form mixed vesicles and/or micelles, depending on the relative amount of the surfactants. The melting temperature T(m) of the mixed DODAB-C(18)TAB vesicles is larger than that for the neat DODAB in water owing to the incorporation of C(18)TAB in the vesicle bilayer. The surface tension decreases sigmoidally with C(18)TAB concentration and the inflection point lies around x(DODAB) approximately 0.4, indicating the onset of micelle formation owing to saturation of DODAB vesicles by C(18)TAB molecules. When x(DODAB)>0.5 C(18)TAB molecules are mainly solubilised by the vesicles, but when x(DODAB)<0.25 micelles are dominant. Fluorescence data of the Nile Red probe incorporated in the system at different surfactant molar fractions indicate the formation of micelle and vesicle structures. These structures have apparent hydrodynamic radius R(H) of about 180 and 500-800 nm, respectively, as obtained by DLS measurements.

The effect of octylglucoside and sodium cholate in Staphylococcus epidermidis and Pseudomonas aeruginosa adhesion to soft contact lenses.

PURPOSE: In this study, the effect of the natural surfactants octylglucoside and sodium cholate in inhibiting Staphylococcus epidermidis and Pseudomonas aeruginosa adhesion to conventional and silicone-hydrogel contact lenses (CL) was assessed. Hydrophobicity was also evaluated to conditioned and nonconditioned CL. METHODS: The inhibiting effect of the tested surfactants was determined through "in vitro" adhesion studies to conditioned and nonconditioned CL followed by image acquisition and cell enumeration. Hydrophobicity was evaluated through contact angle measurements using the advancing type technique on air. RESULTS: Sodium cholate exhibits a very low capability to inhibit microbial adhesion. Conversely, octylglucoside effectively inhibited microbial adhesion in both types of lenses. This surfactant exhibited an even greater performance than a multipurpose lens care solution used as control. Octylglucoside was the only tested surfactant able to lower the hydrophobicity of all CL, which can explain its high performance. CONCLUSIONS: The results obtained in this study point out the potential of octylglucoside as a conditioning agent to prevent microbial colonization.