RESUMEN
Lead (Pb2+) toxification is a concerning, unaddressed global public health crisis that leads to 1 million deaths annually. Yet, public policies to address this issue have fallen short. This work harnesses the unique abilities of crown ethers, which selectively bind to specific ions. This study demonstrates the synergistic integration of highly-scalable silicon photonics, with crown ether amine conjugation via Fischer esterification in an environmentally-friendly fashion. This realizes an integrated photonic platform that enables the in-operando, highly-selective and quantitative detection of various ions. The development dispels the existing notion that Fischer esterification is restricted to organic compounds, facilitating the subsequent amine conjugation for various crown ethers. The presented platform is specifically engineered for selective Pb2+ detection, demonstrating a large dynamic detection range, and applicability to field samples. The compatibility of this platform with cost-effective manufacturing indicates the potential for pervasive implementation of the integrated photonic sensor technology to safeguard against societal Pb2+ poisoning.
RESUMEN
Current heterogeneous Si photonics usually bond III-V wafers/dies on a silicon-on-insulator (SOI) substrate in a back-end process, whereas monolithic integration by direct epitaxy could benefit from a front-end process where III-V materials are grown prior to the fabrication of passive optical circuits. Here we demonstrate a front-end-of-line (FEOL) processing and epitaxy approach on Si photonics 220 nm (001) SOI wafers to enable positioning dislocation-free GaAs layers in lithographically defined cavities right on top of the buried oxide layer. Thanks to the defect confinement in lateral growth, threading dislocations generated from the III-V/Si interface are effectively trapped within â¼250 nm of the Si surface. This demonstrates the potential of in-plane co-integration of III-Vs with Si on mainstream 220 nm SOI platform without relying on thick, defective buffer layers. The challenges associated with planar defects and coalescence into larger membranes for the integration of on-chip optical devices are also discussed.
RESUMEN
The escalating need for expansive data bandwidth, and the resulting capacity constraints of the single mode fiber (SMF) have positioned the 2-µm waveband as a prospective window for emerging applications in optical communication. This has initiated an ecosystem of silicon photonic components in the region driven by CMOS compatibility, low cost, high efficiency and potential for large-scale integration. In this study, we demonstrate a plasma dispersive 4 × 4 photonic switch operating at the 2-µm waveband with the highest switching speed. The demonstrated switch operates across a 45-nm bandwidth, with 10-90% rise and 90-10% fall time of 1.78â ns and 3.02â ns respectively. In a 4 × 4 implementation, crosstalk below -15â dB and power consumption lower than 19.15â mW across all 16 optical paths are indicated. This result brings high-speed optical switching to the portfolio of devices at the promising waveband.
RESUMEN
As the silicon photonics field matures and a data-hungry future looms ahead, new technologies are required to keep up pace with the increase in capacity demand. In this paper, we review current developments in the near-IR and mid-IR group IV photonic modulators that show promising performance. We analyse recent trends in optical and electrical co-integration of modulators and drivers enabling modulation data rates of 112 GBaud in the near infrared. We then describe new developments in short wave infrared spectrum modulators such as employing more spectrally efficient PAM-4 coding schemes for modulations up to 40 GBaud. Finally, we review recent results at the mid infrared spectrum and application of the thermo-optic effect for modulation as well as the emergence of new platforms based on germanium to tackle the challenges of modulating light in the long wave infrared spectrum up to 10.7 µm with data rates of 225 MBaud.
RESUMEN
Germanium (Ge) ion implantation into silicon waveguides will induce lattice defects in the silicon, which can eventually change the crystal silicon into amorphous silicon and increase the refractive index from 3.48 to 3.96. A subsequent annealing process, either by using an external laser or integrated thermal heaters can partially or completely remove those lattice defects and gradually change the amorphous silicon back into the crystalline form and, therefore, reduce the material's refractive index. Utilising this change in optical properties, we successfully demonstrated various erasable photonic devices. Those devices can be used to implement a flexible and commercially viable wafer-scale testing method for a silicon photonics fabrication line, which is a key technology to reduce the cost and increase the yield in production. In addition, Ge ion implantation and annealing are also demonstrated to enable post-fabrication trimming of ring resonators and Mach-Zehnder interferometers and to implement nonvolatile programmable photonic circuits.
RESUMEN
We demonstrate high-speed silicon modulators optimized for operating at the wavelength of 2 µm. The Mach-Zehnder interferometer (MZI) carrier-depletion modulator with 2 mm phase shifter has a single-arm modulation efficiency (Vπ ·Lπ) of 2.89 V·cm at 4 V reverse bias. Using a push-pull configuration it operates at a data rate of 25 Gbit/s OOK with an extinction ratio of 6.25 dB. We also proposed a mathematically-analysed streamlined IMDD PAM-4 scheme and successfully demonstrated a 25 Gbit/s datarate PAM-4 with the same 2 mm modulator. A Michelson interferometer carrier-depletion modulator with 0.5 mm phase shift length has also been shown with modulation efficiency (Vπ ·Lπ) of 1.36 V·cm at 4 V reverse bias and data rate of 20 Gbit/s OOK. The Michelson interferometer modulator performs similarly to a Mach-Zehnder modulator with twice the phase shifter length.
RESUMEN
Accurate three-dimensional (3D) imaging is essential for machines to map and interact with the physical world1,2. Although numerous 3D imaging technologies exist, each addressing niche applications with varying degrees of success, none has achieved the breadth of applicability and impact that digital image sensors have in the two-dimensional imaging world3-10. A large-scale two-dimensional array of coherent detector pixels operating as a light detection and ranging system could serve as a universal 3D imaging platform. Such a system would offer high depth accuracy and immunity to interference from sunlight, as well as the ability to measure the velocity of moving objects directly11. Owing to difficulties in providing electrical and photonic connections to every pixel, previous systems have been restricted to fewer than 20 pixels12-15. Here we demonstrate the operation of a large-scale coherent detector array, consisting of 512 pixels, in a 3D imaging system. Leveraging recent advances in the monolithic integration of photonic and electronic circuits, a dense array of optical heterodyne detectors is combined with an integrated electronic readout architecture, enabling straightforward scaling to arbitrarily large arrays. Two-axis solid-state beam steering eliminates any trade-off between field of view and range. Operating at the quantum noise limit16,17, our system achieves an accuracy of 3.1 millimetres at a distance of 75 metres when using only 4 milliwatts of light, an order of magnitude more accurate than existing solid-state systems at such ranges. Future reductions of pixel size using state-of-the-art components could yield resolutions in excess of 20 megapixels for arrays the size of a consumer camera sensor. This result paves the way for the development and proliferation of low-cost, compact and high-performance 3D imaging cameras that could be used in applications from robotics and autonomous navigation to augmented reality and healthcare.
RESUMEN
The wavelength region about of 1650 nm enables pervasive applications. Some instances include methane spectroscopy, free-space/fiber communications, LIDAR, gas sensing (i.e. C2H2, C2H4, C3H8), surgery and medical diagnostics. In this work, through the hybrid integration between an III-V optical amplifier and an extended, low-loss wavelength tunable silicon Vernier cavity, we report for the first time, a III-V/silicon hybrid wavelength-tunable laser covering the application-rich wavelength region of 1647-1690 nm. Room-temperature continuous wave operation is achieved with an output power of up to 31.1 mW, corresponding to a maximum side-mode suppression ratio of 46.01 dB. The laser is ultra-coherent, with an estimated linewidth of 0.7 kHz, characterized by integrating a 35 km-long recirculating fiber loop into the delayed self-heterodyne interferometer setup. The laser linewidth is amongst the lowest in hybrid/heterogeneous III-V/silicon lasers.
RESUMEN
A novel technique for realization of configurable/one-time programmable (OTP) silicon photonic circuits is presented. Once the proposed photonic circuit is programmed, its signal routing is retained without the need for additional power consumption. This technology can potentially enable a multi-purpose design of photonic chips for a range of different applications and performance requirements, as it can be programmed for each specific application after chip fabrication. Therefore, the production costs per chip can be reduced because of the increase in production volume, and rapid prototyping of new photonic circuits is enabled. Essential building blocks for the configurable circuits in the form of erasable directional couplers (DCs) were designed and fabricated, using ion implanted waveguides. We demonstrate permanent switching of optical signals between the drop port and through the port of the DCs using a localized post-fabrication laser annealing process. Proof-of-principle demonstrators in the form of generic 1×4 and 2×2 programmable switching circuits were fabricated and subsequently programmed.
RESUMEN
This paper presents the design and implementation of a fully differential optical receiver, which is aimed for short reach intensity modulation and direct detection (IMDD) transceiver links. A Si-Ge balanced photodetector (PD) has been co-designed and packaged with a novel differential transimpedance amplifier (TIA). The TIA design is realized with a standard 28 nm CMOS process and operates with a standard digital supply (1V). Without using any equalization or DSP techniques, the proposed receiver can operate up to 54 Gb/s with a BER less than the KP4 limit (2.2×10-4) under an optical modulation amplitude (OMA) of -8.6 dBm, while the power efficiency has been optimized to 0.55 pJ/bit (0.98 pJ/bit if output buffer is included).
RESUMEN
In recent years, the 2 µm waveband has been gaining significant attention due to its potential in the realization of several key technologies, specifically, future long-haul optical communications near the 1.9 µm wavelength region. In this work, we present a hybrid silicon photonic wavelength-tunable diode laser with an operating range of 1881-1947 nm (66 nm) for the first time, providing good compatibility with the hollow-core photonic bandgap fiber and thulium-doped fiber amplifier. Room-temperature continuous-wave operation was achieved with a favorable on-chip output power of 28 mW. Stable single-mode lasing was observed with side-mode suppression ratio up to 35 dB. Besides the abovementioned potential applications, the demonstrated wavelength region will find critical purpose in H2O spectroscopic sensing, optical logic, signal processing as well as enabling the strong optical Kerr effect on Si.
RESUMEN
We propose and experimentally demonstrate an apodized bidirectional grating coupler for high-efficiency, perfectly vertical coupling. Through grating apodization, the coupling efficiency (CE) can be notably improved, and the parasitic reflections can be minimized. For ease of fabrication, subwavelength gratings are introduced, which are also beneficial for the coupling performance. Simulation shows a record CE of 72%. We found that the coupler is quite robust to the variation of incidence mode field diameter and fiber misalignment. A CE of -1.8 dB is experimentally measured with a 1-dB bandwidth of 37 nm.
RESUMEN
We present interlayer slope waveguides, designed to guide light from one level to another in a multi-layer silicon photonics platform. The waveguide is fabricated from hydrogenated amorphous silicon (a-Si:H) film, deposited using hot-wire chemical vapor deposition (HWCVD) at a temperature of 230°C. The interlayer slope waveguide is comprises of a lower level input waveguide and an upper level output waveguide, connected by a waveguide on a slope, with vertical separation to isolate other crossing waveguides. Measured loss of 0.17 dB/slope was obtained for waveguide dimensions of 600 nm waveguide width (w) and 400 nm core thickness (h) at a wavelength of 1550 nm and for transverse electric (TE) mode polarization.
RESUMEN
Fabrication errors pose significant challenges on silicon photonics, promoting post-fabrication trimming technologies to ensure device performance. Conventional approaches involve multiple trimming and characterization steps, impacting overall fabrication complexity. Here we demonstrate a highly accurate trimming method combining laser annealing of germanium implanted silicon waveguide and real-time monitoring of device performance. Direct feedback of the trimming process is facilitated by a differential spectroscopic technique based on photomodulation. The resonant wavelength trimming accuracy is better than 0.15 nm for ring resonators with 20-µm radius. We also realize operating point trimming of Mach-Zehnder interferometers with germanium implanted arms. A phase shift of 1.2π is achieved by annealing a 7-µm implanted segment.
RESUMEN
Mode-division multiplexing (MDM) using multiple spatial modes as independent signals has been a promising technique to increase the communication capacity in conjunction with wavelength-division multiplexing (WDM). In MDM systems, mode filters are key components to filter out the undesired signals on specific mode. Analogous to a wavelength tunable filter used in a WDM system, here we propose and experimentally demonstrate a fundamental- or high-order-mode-pass tunable filter for a flexible MDM optical network based on a silicon platform. It consists of two switchable mode exchangers (MEs) and a fundamental-mode pass filter. By controlling the working state of the MEs, dynamic filtering and a tunable output can be achieved. This tunable mode filter exhibits a high extinction ratio of 18 dB and low insertion loss of 3 dB over the C-band. For further demonstration, the proposed device is tested using a modulated signal at 20 Gb/s. The eye diagrams and the bit error rates indicate a good filtering performance.
RESUMEN
Advanced photonic probing techniques are of great importance for the development of non-contact wafer-scale testing of photonic chips. Ultrafast photomodulation has been identified as a powerful new tool capable of remotely mapping photonic devices through a scanning perturbation. Here, we develop photomodulation maps into a quantitative technique through a general and rigorous method based on Lorentz reciprocity that allows the prediction of transmittance perturbation maps for arbitrary linear photonic systems with great accuracy and minimal computational cost. Excellent agreement is obtained between predicted and experimental maps of various optical multimode-interference devices, thereby allowing direct comparison of a device under test with a physical model of an ideal design structure. In addition to constituting a promising route for optical testing in photonics manufacturing, ultrafast perturbation mapping may be used for design optimization of photonic structures with reconfigurable functionalities.
RESUMEN
We report on the generation of an optical comb of highly uniform in power frequency lines (variation less than 0.7 dB) using a silicon ring resonator modulator. A characterization involving the measurement of the complex transfer function of the ring is presented and five frequency tones with a 10-GHz spacing are produced using a dual-frequency electrical input at 10 and 20 GHz. A comb shape comparison is conducted for different modulator bias voltages, indicating optimum operation at a small forward-bias voltage. A time-domain measurement confirmed that the comb signal was highly coherent, forming 20.3-ps-long pulses.
RESUMEN
We propose a new low VπL, fully-crystalline, accumulation modulator design based on a thin horizontal gate oxide slot fin waveguide, on bonded double Silicon-on-Insulator (SOI). A combination of anisotropic wet etching and the mirrored crystal alignment of the top and bottom SOI layers allows us for the first time to selectively pattern the bottom layer from above. Simulations presented herein show a VπL = 0.17Vcm. Fin-waveguides and passive Mach-Zehnder Interferometer (MZI) devices with fin-waveguide phase shifters have been fabricated, with the fin-waveguides having a transmission loss of 5.8dB/mm and a 13.5nm thick internal gate oxide slot.
RESUMEN
Hybrid integration of nanoplasmonic devices with silicon photonic circuits holds promise for a range of applications in on-chip sensing, field-enhanced and nonlinear spectroscopy, and integrated nanophotonic switches. Here, we demonstrate a new regime of photon-plasmon coupling by combining a silicon photonic resonator with plasmonic nanoantennas. Using principles from coherent perfect absorption, we make use of standing-wave light fields to maximize the photon-plasmon interaction strength. Precise placement of the broadband antennas with respect to the narrowband photonic racetrack modes results in controlled hybridization of only a subset of these modes. By combining antennas into groups of radiating dipoles with opposite phase, far-field scattering is effectively suppressed. We achieve ultrafast tuning of photon-plasmon hybridization including reconfigurable routing of the standing-wave input between two output ports. Hybrid photonic-plasmonic resonators provide conceptually new approaches for on-chip integrated nanophotonic devices.
RESUMEN
We present a simple and practical strategy that allows to design high-efficiency grating couplers. The technique is based on the simultaneous apodization of two structural parameters: the grating period and the fill-factor, along with the optimization of the grating coupler etching depth. Considering a 260 nm Si-thick Silicon-on-insulator platform, we numerically demonstrated a coupling efficiency of -0.8 dB (83%), well matching the experimental value of -0.9 dB (81%). Thanks to the optimized design, these results represent the best performance ever reported in the literature for SOI structures without the use of any back-reflector.