Tuning Charge-Transfer States by Interface Electric Fields.

Intermolecular charge-transfer (CT) states are extended excitons with a charge separation on the nanometer scale. Through absorption and emission processes, they couple to the ground state. This property is employed both in light-emitting and light-absorbing devices. Their conception often relies on donor-acceptor (D-A) interfaces, so-called type-II heterojunctions, which usually generate significant electric fields. Several recent studies claim that these fields alter the energetic configuration of the CT states at the interface, an idea holding prospects like multicolor emission from a single emissive interface or shifting the absorption characteristics of a photodetector. Here, we test this hypothesis and contribute to the discussion by presenting a new model system. Through the fabrication of planar organic p-(i-)n junctions, we generate an ensemble of oriented CT states that allows the systematic assessment of electric field impacts. By increasing the thickness of the intrinsic layer at the D-A interface from 0 to 20 nm and by applying external voltages up to 6 V, we realize two different scenarios that controllably tune the intrinsic and extrinsic electric interface fields. By this, we obtain significant shifts of the CT-state peak emission of about 0.5 eV (170 nm from red to green color) from the same D-A material combination. This effect can be explained in a classical electrostatic picture, as the interface electric field alters the potential energy of the electric CT-state dipole. This study illustrates that CT-state energies can be tuned significantly if their electric dipoles are aligned to the interface electric field.

Room Temperature Phosphorescence from Natural, Organic Emitters and Their Application in Industrially Compostable Programmable Luminescent Tags.

Organic semiconductors provide the potential of biodegradable technologies, but prototypes do only rarely exist. Transparent, ultrathin programmable luminescent tags (PLTs) are presented for minimalistic yet efficient information storage that are fully made from biodegradable or at least industrially compostable, ready-to-use materials (bioPLTs). As natural emitters, the quinoline alkaloids show sufficient room temperature phosphorescence when being embedded in polymer matrices with cinchonine exhibiting superior performance. Polylactic acid provides a solution for both the matrix material and the flexible substrate. Room temperature phosphorescence can be locally controlled by the oxygen concentration in the film by using Exceval as additional oxygen blocking layers. These bioPLTs exhibit all function-defining characteristics also found in their regular nonenvironmentally degradable analogs and, additionally, provide a simplified, high-contrast readout under continuous-wave illumination as a consequence of the unique luminescence properties of the natural emitter cinchonine. Limitations for flexible devices arise from limited thermal stability of the polylactic acid foil used as substrate allowing only for one writing cycle and preventing an annealing step during fabrication. Few-cycle reprogramming is possible when using the architecture of the bioPLTs on regular quartz substrates. This work realizes the versatile platform of PLTs with less harmful materials offering more sustainable use in future.

In-plane oxygen diffusion measurements in polymer films using time-resolved imaging of programmable luminescent tags.

Oxygen diffusion properties in thin polymer films are key parameters in industrial applications from food packaging, over medical encapsulation to organic semiconductor devices and have been continuously investigated in recent decades. The established methods have in common that they require complex pressure-sensitive setups or vacuum technology and usually do not come without surface effects. In contrast, this work provides a low-cost, precise and reliable method to determine the oxygen diffusion coefficient D in bulk polymer films based on tracking the phosphorescent pattern of a programmable luminescent tag over time. Our method exploits two-dimensional image analysis of oxygen-quenched organic room-temperature phosphors in a host polymer with high spatial accuracy. It avoids interface effects and accounts for the photoconsumption of oxygen. As a role model, the diffusion coefficients of polystyrene glasses with molecular weights between 13k and 350k g/mol are determined to be in the range of (0.8-1.5) × 10-7 cm2/s, which is in good agreement with previously reported values. We finally demonstrate the reduction of the oxygen diffusion coefficient in polystyrene by one quarter upon annealing above its glass transition temperature.

Molecularly induced order promotes charge separation through delocalized charge-transfer states at donor-acceptor heterojunctions.

The energetic landscape at the interface between electron donating and accepting molecular materials favors efficient conversion of intermolecular charge-transfer (CT) states into free charge carriers (FCC) in high-performance organic solar cells. Here, we elucidate how interfacial energetics, charge generation and radiative recombination are affected by molecular arrangement. We experimentally determine the CT dissociation properties of a series of model, small molecule donor-acceptor blends, where the used acceptors (B2PYMPM, B3PYMPM and B4PYMPM) differ only in the nitrogen position of their lateral pyridine rings. We find that the formation of an ordered, face-on molecular packing in B4PYMPM is beneficial to efficient, field-independent charge separation, leading to fill factors above 70% in photovoltaic devices. This is rationalized by a comprehensive computational protocol showing that, compared to the more amorphous and isotropically oriented B2PYMPM, the higher structural order of B4PYMPM molecules leads to more delocalized CT states. Furthermore, we find no correlation between the quantum efficiency of FCC radiative recombination and the bound or unbound nature of the CT states. This work highlights the importance of structural ordering at donor-acceptor interfaces for efficient FCC generation and shows that less bound CT states do not preclude efficient radiative recombination.

Epidemiology and injury morphology of traumatic hip dislocations in children and adolescents in Germany: a multi-centre study.

OBJECTIVE: Traumatic hip dislocations are very rare in childhood and adolescence. The aim of this multi-centre study is to analyse the current epidemiology and injury morphology of a large number of traumatic hip dislocations in children. This can provide a better understanding of childhood hip dislocations and contribute to the development of a therapeutic approach in order to prevent long-term impacts. METHODOLOGY: This retrospective, anonymised multi-centre study included patients, aged up to 17 years, with acute traumatic hip dislocations and open growth plates. The patients came from 16 German hospitals. Exclusion criteria included insufficient data, a positive history of hip dysplasia, or an association with syndromal, neurological or connective tissue diseases predisposing to hip dislocation. An analysis was carried out on the patients' anthropometric data and scans (X-ray, MRI, CT), which were collected between 1979 and 2021. Gender, age at the time of dislocation, associated fractures, mechanism of injury, initial treatment including time between dislocation and reduction, method of reduction, treatment algorithm following reduction and all documented complications and concomitant injuries were evaluated. RESULTS: Seventy-six patients met the inclusion criteria. There were two age peaks at 4-8 years and 11-15 years. There was an increased incidence of girls in the under-eight age group, who had mild trauma, and in the group of over-eights there were more boys, who had moderate and severe trauma. Dorsal dislocation occurred in 89.9% of cases. Mono-injuries dominated across all age groups. Concomitant injuries rarely occurred before the age of eight; however, they increased with increasing ossification of the acetabulum and appeared as avulsion injuries in 32% of 11-15-year-olds. Of the 76 patients, 4 underwent a spontaneous, 67 a closed and 5 a primary open reduction. A reduction was performed within 6 h on 84% of the children; however, in around 10% of cases a reduction was not performed until after 24 h. Concomitant injuries needing intervention were identified in 34 children following reduction. Complications included nerve irritation in the form of sensitivity disorders (n = 6) as well as avascular necrosis (AVN) of the femoral head in 15.8% of the patients (n = 12). CONCLUSIONS: Traumatic hip dislocations are rare in childhood and adolescence and have high complication rates. The most severe complication, femoral head necrosis, occurred in 16% of cases. Minor injuries, especially in younger children, are enough to cause a dislocation. Posterior dislocation was more frequent and primarily occurred as a mono-injury; however, concomitant injuries must be considered with increasing age. Children continue to experience delayed reductions. The length of time until reduction, age and the severity of the concomitant injury play a role in the development of femoral head necrosis; however, this topic requires additional investigation.

Tuning Structural and Optical Properties of Porphyrin-based Hydrogen-Bonded Organic Frameworks by Metal Insertion.

Herein, a simple way of tuning the optical and structural properties of porphyrin-based hydrogen-bonded organic frameworks (HOFs) is reported. By inserting transition metal ions into the porphyrin cores of GTUB-5 (p-H8 -TPPA (5,10,15,20-Tetrakis[p-phenylphosphonic acid] HOF), the authors show that it is possible to generate HOFs with different band gaps, photoluminescence (PL) life times, and textural properties. The band gaps of the resulting HOFs (viz., Cu-, Ni-, Pd-, and Zn-GTUB-5) are measured by diffuse reflectance and PL spectroscopy, as well as calculated via DFT, and the PL lifetimes are measured. Across the series, the band gaps vary over a narrow range from 1.37 to 1.62 eV, while the PL lifetimes vary over a wide range from 2.3 to 83 ns. These differences ultimately arise from metal-induced structural changes, viz., changes in the metal-to-nitrogen distances, number of hydrogen bonds, and pore volumes. DFT reveals that the band gaps of Cu-, Zn-, and Pd- GTUB-5 are governed by highest occupied/lowest unoccupied crystal orbitals (HOCO/LUCO) composed of π- orbitals on the porphyrin linkers, while that of Ni-GTUB-5 is governed by a HOCO and LUCO composed of Ni dorbitals. Overall, our findings show that metal-insertion can be used to optimize HOFs for optoelectronics and small-molecule capture applications.

Accurate Wavelength Tracking by Exciton Spin Mixing.

Wavelength-discriminating systems typically consist of heavy benchtop-based instruments, comprising diffractive optics, moving parts, and adjacent detectors. For simple wavelength measurements, such as lab-on-chip light source calibration or laser wavelength tracking, which do not require polychromatic analysis and cannot handle bulky spectroscopy instruments, lightweight, easy-to-process, and flexible single-pixel devices are attracting increasing attention. Here, a device is proposed for monotonously transforming wavelength information into the time domain with room-temperature phosphorescence at the heart of its functionality, which demonstrates a resolution down to 1 nm and below. It is solution-processed from a single host-guest system comprising organic room-temperature phosphors and colloidal quantum dots. The share of excited triplet states within the photoluminescent layer is dependent on the excitation wavelength and determines the afterglow intensity of the film, which is tracked by a simple photodetector. Finally, an all-organic thin-film wavelength sensor and two applications are demonstrated where this novel measurement concept successfully replaces a full spectrometer.

Optical Properties of Perovskite-Organic Multiple Quantum Wells.

A comprehensive study of the optical properties of CsPbBr3 perovskite multiple quantum wells (MQW) with organic barrier layers is presented. Quantum confinement is observed by a blue-shift in absorption and emission spectra with decreasing well width and agrees well with simulations of the confinement energies. A large increase of emission intensity with thinner layers is observed, with a photoluminescence quantum yield up to 32 times higher than that of bulk layers. Amplified spontaneous emission (ASE) measurements show very low thresholds down to 7.3 µJ cm-2 for a perovskite thickness of 8.7 nm, significantly lower than previously observed for CsPbBr3 thin-films. With their increased photoluminescence efficiency and low ASE thresholds, MQW structures with CsPbBr3 are excellent candidates for high-efficiency perovskite-based LEDs and lasers.

Viologen-Immobilized 2D Polymer Film Enabling Highly Efficient Electrochromic Device for Solar-Powered Smart Window.

Electrochromic devices (ECDs) have emerged as a unique class of optoelectronic devices for the development of smart windows. However, current ECDs typically suffer from low coloration efficiency (CE) and high energy consumption, which have thus hindered their practical applications, especially as components in solar-powered EC windows. Here, the high-performance ECDs with a fully crystalline viologen-immobilized 2D polymer (V2DP) thin film as the color-switching layer is demonstrated. The high density of vertically oriented pore channels (pore size ≈ 4.5 nm; pore density ≈ 5.8 × 1016 m-2 ) in the synthetic V2DP film enables high utilization of redox-active viologen moieties and benefits for Li+ ion diffusion/transport. As a result, the as-fabricated ECDs achieve a rapid switching speed (coloration, 2.8 s; bleaching, 1.2 s), and a high CE (989 cm2 C-1 ), and low energy consumption (21.1 µW cm-2 ). Moreover, it is managed to fabricate transmission-tunable, self-sustainable EC window prototypes by vertically integrating the V2DP ECDs with transparent solar cells. This work sheds light on designing electroactive 2D polymers with molecular precision for optoelectronics and paves a practical route toward developing self-powered EC windows to offset the electricity consumption of buildings.

Organic Dye-Doped PMMA Lasing.

Organic thin-film lasers gain interest as potential light sources for application in diverse fields. With the current development, they hold variety of benefits such as: low-cost, high-performance, and color-tunability. Meanwhile, the production is not complicated because both the resonator and the gain medium can be assembled by solution-processable organic materials. To our knowledge, information about using poly(methyl methacrylate) (PMMA) as a matrix for organic dye lasers was insubstantial. Herein, the feasibility of using organic dye-doped PMMA as an organic dye laser was tested. Six different sample designs were introduced to find out the best sample model. The most optimum result was displayed by the sample design, in which the gain medium was sandwiched between the substrate and the photoresist layer with grating structure. The impact of dye concentration and grating period on peak wavelength was also investigated, which resulted in a shift of 6 nm and 25 nm, respectively. Moreover, there were in total six various organic dyes that could function well with PMMA to collectively perform as 'organic dye lasers', and they emitted in the range of 572 nm to 609 nm. Besides, one of the samples was used as a sensor platform. For instance, it was used to detect the concentration of sugar solutions.

High-Speed and Continuous-Wave Programmable Luminescent Tags Based on Exclusive Room Temperature Phosphorescence (RTP).

Most materials recently developed for room temperature phosphorescence (RTP) lack in practical relevance due to their inconvenient crystalline morphology. Using amorphous material systems instead, programmable luminescent tags (PLTs) based on organic biluminescent emitter molecules with easy processing and smooth sample shapes are presented recently. Here, the effective quenching of the emitter's RTP by molecular oxygen (O2 ) and the consumption of the excited singlet O2 through a chemical reaction represent the central features. With customized activation schemes, high-resolution content can be written and later erased multiple times into such films, providing a versatile yet simple photonic platform for information storage. However, two important limitations remain: The immutable fluorescence of the emitters outshines the phosphorescent patterns by roughly one order of magnitude, allowing readout of the PLTs only after the excitation source is turned off. The programming of these systems is a rather slow process, where lowest reported activation times are still >8 s. Here, a material-focused approach to PLTs with fast activation times of 120 ± 20 ms and high-contrast under continuous-wave illumination is demonstrated, leading to accelerated programming on industry relevant time scales and a simplified readout process both by eye and low cost cameras.

Analysis and optimization of light outcoupling in OLEDs with external hierarchical textures.

Hierarchical textures (combining 2D periodic large and small micro textures) as an external outcoupling solution for OLEDs have been researched, both experimentally and by optical simulations. For the case of a red bottom emitting OLED, different hierarchical textures were fabricated using laser-based methods and a replication step and applied to the OLED substrate, resulting in an increased light outcoupling. Laboratory-size OLED devices with applied textured foils show a smaller increase in efficiency compared to the final large area devices. The results show that the full exploitation of textured foils in laboratory-size samples is mainly limited by the lateral size of the thin film stack area and by limited light collection area of the measuring equipment. Modeling and simulations are used to further evaluate the full prospective of hierarchical textures in large area OLED devices. Optimization of hierarchical textures is done by simultaneously changing the aspect ratios of the small and large textures and a potential of 57% improvement in EQE compared to devices without applied textures is predicted by simulations. Optimized hierarchical textures show similar outcoupling efficiencies compared to optimized single textures, while on the other hand hierarchical textures require less pronounced features, lower aspect ratios, compared to single textures to achieve the same efficiencies. Hierarchical textures also help in eliminating flat parts that limit outcoupling efficiency. Finally, the limiting factors that prevent higher outcoupling are addressed. We show that the dominant factor is non-ideal reflection from the organic thin film stack due to parasitic absorption. In addition, possible ways to further increase the outcoupling from a thick substrate are indicated.

Reduced Intrinsic Non-Radiative Losses Allow Room-Temperature Triplet Emission from Purely Organic Emitters.

Persistent luminescence from triplet excitons in organic molecules is rare, as fast non-radiative deactivation typically dominates over radiative transitions. This work demonstrates that the substitution of a hydrogen atom in a derivative of phenanthroimidazole with an N-phenyl ring can substantially stabilize the excited state. This stabilization converts an organic material without phosphorescence emission into a molecular system exhibiting efficient and ultralong afterglow phosphorescence at room temperature. Results from systematic photophysical investigations, kinetic modeling, excited-state dynamic modeling, and single-crystal structure analysis identify that the long-lived triplets originate from a reduction of intrinsic non-radiative molecular relaxations. Further modification of the N-phenyl ring with halogen atoms affects the afterglow lifetime and quantum yield. As a proof-of-concept, an anticounterfeiting device is demonstrated with a time-dependent Morse code feature for data encryption based on these emitters. A fundamental design principle is outlined to achieve long-lived and emissive triplet states by suppressing intrinsic non-radiative relaxations in the form of molecular vibrations or rotations.

Purely Organic Microparticles Showing Ultralong Room Temperature Phosphorescence.

Currently, organic phosphorescent particles are heavily used in sensing and imaging. Up to now, most of these particles contain poisonous and/or expensive metal complexes. Environmentally friendly systems are therefore highly desired. A purely amorphous system consisting of poly(methyl methacrylate) particles with incorporated N,N,N',N'-tetrakis(4-carboxyphenyl)benzidine emitter molecules is presented in this work. Single particles with sizes between 400 and 840 nm show-depending on the environment-bright fluorescence and phosphorescence. The latter is observed when oxygen is not in the proximity of the emitting dye molecules. These particles can scavenge singlet oxygen, which is produced during the photoexcitation process, by incorporating it into the polymer matrix. This renders their use to be unharmful for the surrounding matter with possible application in marking schemes for living bodies.

Conjugation-Induced Thermally Activated Delayed Fluorescence: Photophysics of a Carbazole-Benzophenone Monomer-to-Tetramer Molecular Series.

Materials exhibiting thermally activated delayed fluorescence (TADF) have been extensively explored in the last decade. These emitters have great potential of being used in organic light-emitting diodes because they allow for high quantum efficiencies by utilizing triplet states via reverse intersystem crossing. In small molecules, this is done by spatially separating the highest occupied molecular orbital from the lowest unoccupied molecular orbital, forming an intramolecular charge-transfer (iCT) state and leading to a small energy difference between lowest excited singlet and triplet states (ΔEST). However, in polymer emitters, this is harder to achieve, and typical strategies usually include adding known TADF units as sidechains onto a polymer backbone. In a previous work, we proposed an alternative way to achieve a TADF polymer by repeating a non-TADF unit, polymerizing it via electron-donating carbazole moieties. The extended conjugation on the backbone reduced the ΔEST and allowed for an efficient TADF polymer. In this work, we present a more in-depth study of the shift from a non-TADF monomer to TADF oligomers. The monomer shows non-TADF emission, and we find the delayed emission to be of triplet-triplet annihilation origin. An iCT state is formed already in the dimer, leading to a much more efficient TADF emission. This is confirmed by an almost two-fold increase of photoluminescence quantum yield, a decrease in the delayed luminescence lifetime, and the respective spectral lineshapes of the molecules.

Synthesis of Vinylene-Linked Two-Dimensional Conjugated Polymers via the Horner-Wadsworth-Emmons Reaction.

In this work, we demonstrate the first synthesis of vinylene-linked 2D CPs, namely, 2D poly(phenylenequinoxalinevinylene)s 2D-PPQV1 and 2D-PPQV2, via the Horner-Wadsworth-Emmons (HWE) reaction of C2 -symmetric 1,4-bis(diethylphosphonomethyl)benzene or 4,4'-bis(diethylphosphonomethyl)biphenyl with C3 -symmetric 2,3,8,9,14,15-hexa(4-formylphenyl)diquinoxalino[2,3-a:2',3'-c]phenazine as monomers. Density functional theory (DFT) simulations unveil the crucial role of the initial reversible C-C single bond formation for the synthesis of crystalline 2D CPs. Powder X-ray diffraction (PXRD) studies and nitrogen adsorption-desorption measurements demonstrate the formation of proclaimed crystalline, dual-pore structures with surface areas of up to 440 m2 g-1 . More importantly, the optoelectronic properties of the obtained 2D-PPQV1 (Eg =2.2 eV) and 2D-PPQV2 (Eg =2.2 eV) are compared with those of cyano-vinylene-linked 2D-CN-PPQV1 (Eg =2.4 eV) produced by the Knoevenagel reaction and imine-linked 2D COF analog (2D-C=N-PPQV1, Eg =2.3 eV), unambiguously proving the superior conjugation of the vinylene-linked 2D CPs using the HWE reaction.

Polymer Featuring Thermally Activated Delayed Fluorescence as Emitter in Light-Emitting Electrochemical Cells.

Semiconducting polymers that feature thermally activated delayed fluorescence (TADF) can deliver a much desired combination of high-efficiency and metal-free electroluminescence and cost-efficient solution-based fabrication. A TADF polymer is thus a very good fit for the emitting compound in light-emitting electrochemical cells (LECs) because the commonly employed air-stabile and few-layer LEC architecture is well suited for such solution-based fabrication. Herein we report on the first LEC device based on a TADF polymer as the emitting species, which delivers a luminance of 96 cd m-2 at 4 V and a current efficacy of 1.4 cd A-1 and >600 cd m-2 at 6 V, which is competitive with the performance of multilayer organic light-emitting diodes based on the same TADF polymer. We further utilize the established sensitivity of the emission of the TADF polymer to its environment to draw conclusions on the exciton populations in host-guest and host-free TADF LEC devices.

Aromatic Phosphonates: A Novel Group of Emitters Showing Blue Ultralong Room Temperature Phosphorescence.

In recent years, there has been a growing interest in purely organic materials showing ultralong room-temperature phosphorescence with lifetimes in the range of seconds. Still, the longest known phosphorescence lifetimes are only achieved with crystalline systems so far. Here, a rational design of a completely new family of halogen-free organic luminescent derivatives in amorphous matrices, displaying both conventional fluorescence and phosphorescence is reported. Hydrogen bonding between the newly developed emitters and an ethylene-vinyl alcohol copolymer (Exceval) matrix, which efficiently suppresses vibrational dissipation, enables bright long-lived phosphorescence with lifetimes up to 2.6 s at around 480 nm. The importance of the chosen matrix is shown as well as the implementation in an organic programmable luminescent tag.