Dataset of the lab-scale 3-axis winding machine integrated with the portable real-time winding angle measurement system.

This article presents three datasets related to the laboratory scale 3-axis filament winding machine. The winding experimental tests are described on the range of winding angle, winding accuracy of programmed G-codes, and linear and rotation speeds in raw data. The real-time winding angle measurement system is developed to monitor and measure the winding angle of filament-wound carbon-fiber reinforced plastics (CFRP) tubes. Two winding patterns are provided as dry and wet winding processes. Moreover, an experimental test of a real-time winding angle measurement system is captured and analyzed. The i-winder app controls the winding machine through a Bluetooth module, which is programmed by MIT App Inventor. The data presented in this article can have a benchmark for developing a multi-axis filament winding machine. It is provided an inexpensive and open-source control system and is embedded in a real-time winding angle measurement system. The experimental assessment data can be found in this article [1]. The data is available in the cloud-based Mendeley Data repository [2].

Potentiality of MWCNT on 3D-printed bio-inspired spherical-roof cubic core under quasi-static loading.

Sandwich panel is increasingly used as lightweight energy absorbing components, which provides excellent crashworthiness performance with the three-dimensional periodic core. This paper investigates 3D-printed bio-inspired spherical-roof cubic cores with multi-walled carbon nanotubes (MWCNT) and foam-filled cores under quasi-static loading. The proposed bio-inspired spherical-roof cubic cores with 1.5 mm wall thickness were manufactured using the fused filament fabrication process, which used 70% polylactic acid (PLA) and 30% carbon fiber filament. Moreover, four groups of 3D-printed bio-inspired spherical-roof cubic cores were compared and analyzed on compressive properties and failure behavior. Experimental results were shown that foam-filled double bio-inspired spherical-roof cubic core with MWCNT was the maximum Fpeak with 1.92 kN, which provided a much more stable plateau load and better energy-absorbing characteristics. In addition, it is conducted that a double bio-inspired spherical-roof cubic core with four notches core is considered as the potential energy-absorbing core.

Dosimetric characterisation of the optically-stimulated luminescence dosimeter in cobalt-60 high dose rate brachytherapy system.

This study investigates the characteristics and application of the optically-stimulated luminescence dosimeter (OSLD) in cobalt-60 high dose rate (HDR) brachytherapy, and compares the results with the dosage produced by the treatment planning system (TPS). The OSLD characteristics comprised linearity, reproducibility, angular dependence, depth dependence, signal depletion, bleaching rate and cumulative dose measurement. A phantom verification exercise was also conducted using the Farmer ionisation chamber and in vivo diodes. The OSLD signal indicated a supralinear response (R2 = 0.9998). It exhibited a depth-independent trend after a steep dose gradient region. The signal depletion per readout was negligible (0.02%), with expected deviation for angular dependence due to off-axis sensitive volume, ranging from 1 to 16%. The residual signal of the OSLDs after 1 day bleached was within 1.5%. The accumulated and bleached OSLD signals had a standard deviation of ± 0.78 and ± 0.18 Gy, respectively. The TPS was found to underestimate the measured doses with deviations of 5% in OSLD, 17% in the Farmer ionisation chamber, and 7 and 8% for bladder and rectal diode probes. Discrepancies can be due to the positional uncertainty in the high-dose gradient. This demonstrates a slight displacement of the organ at risk near the steep dose gradient region will result in a large dose uncertainty. This justifies the importance of in vivo measurements in cobalt-60 HDR brachytherapy.

[Intervention on smoking in adolescents in Sousse, Tunisia]. / Etude d'intervention sur le tabagisme chez les adolescents dans la région de Sousse, Tunisie.

PURPOSE: To increase knowledge about smoking via a school prevention programme. PATIENTS AND METHODS: This quasi-experimental study included two groups: a control and an intervention group with a pre- and a post-evaluation of knowledge about smoking in each group. The target population consisted of students of 12 to 16 years old in Sousse, Tunisia. To evaluate the intervention, stratified and proportional sampling was used to include 2100 students in the questionnaire. All the students in the intervention group received a standardized program of information about smoking. A pre-tested and self-managed questionnaire in Arabic was used to assess knowledge about smoking, attitudes and behavioural intent before and after the intervention. RESULTS: The intervention group's post-test knowledge and behavioural intent were significantly higher than that of the control group's. No significant differences were found in post-test attitudes between the control and the intervention groups. CONCLUSION: The authors carried out this survey to evaluate the difficulties and resources in order to institute a more complete and durable program.