Healthy lifestyle decreases the risk of the first incidence of non-communicable chronic disease and its progression to multimorbidity and its mediating roles of metabolic components: a prospective cohort study in China.

OBJECTIVES: To identify the influence of healthy lifestyles on the incidence of the first NCD (FNCD), multiple chronic conditions (MCCs), and the progression from FNCD to MCCs. DESIGN: cohort study. SETTING: Zhejiang, China PARTICIPANTS: 10566 subjects (55.5 ± 13.5 years, 43.1% male) free of NCDs at baseline from the Zhejiang Metabolic Syndrome prospective cohort. MEASUREMENTS: Healthy lifestyle score (HLS) was developed by 6 common healthy lifestyle factors as smoking, alcohol drinking, physical activity, body mass index (BMI) and waist-to-hip ratio (WHR). Healthy lifestyle data and metabolic biomarkers collected via a face-to-face questionnaire-based interview, clinical health examination and routine biochemical determination. Biochemical variables were determined using biochemical auto-analyzer. Participants were stratified into four group based on the levels of HLS as ≤2, 3, 4 and ≥5. Multiple Cox proportional hazards model was applied to examine the relationship between HLS and the risk of FNCD, MCCs and the progression from FNCD to MCCs. The population-attributable fractions (PAF) were used to assess the attributable role of HLS. Mediating effect was examined by mediation package in R. RESULTS: After a median of 9.92 years of follow-up, 1572 participants (14.9%) developed FNCD, and 149 (1.4%) developed MCCs. In the fully adjusted model, the higher HLS group (≥5) was associated with lower risk of FNCD (HR = 0.68 and 95% CI: 0.56-0.82), MCCs (HR = 0.31 and 95%CI: 0.14-0.69); and the progression from FNCD to MCCs (HR = 0.39 and 95%CI: 0.18-0.85). Metabolic components (TC, TG, HDL-C, LDC-C, FPG, and UA) played the mediating roles with the proportion ranging from 5.02% to 22.2% for FNCD and 5.94% to 20.1% for MCCs. PAFs (95%CI) for poor adherence to the overall healthy lifestyle (HLS ≤ 3) were 17.5% (11.2%, 23.7%) for FNCD, 42.9% (23.4%, 61.0%) for MCCs, and 37.0% (15.5%, 56.3%) for the progression from FNCD to MCCs. CONCLUSIONS: High HLS decreases the risk of FNCD, MCCs, and the progression from FNCD to MCCs. These effects are partially mediated by metabolic components. Maintaining healthy lifestyles might reduce the disease burden of common chronic diseases.

Healthy lifestyle scores associate with incidence of type 2 diabetes mediated by uric acid.

BACKGROUND: Whether and to what extent serum uric acid (SUA) mediates the association between combined lifestyle behaviors and type 2 diabetes mellitus (T2DM) remain unclear. This study aimed to investigate the role of SUA in the relationship between healthy lifestyle scores (HLS) and the incidence of T2DM. METHODS: This prospective study used data from Zhejiang Metabolic Syndrome cohort. A HLS (5-point scale including healthy waist circumference (WC), never smoking, high physical activity, healthy diet and moderate alcohol intake) was estimated in 13,919 participants, who had SUA at baseline examination in 2009-2014, and were followed-up to 2021-2022 to ascertain incident of T2DM. Cox proportional hazards models and mediation analysis were used to examine the associations between HLS, SUA and T2DM. RESULTS: We included 13,919 participants aged 18 years or older without diabetes at baseline (mean age 54.6 [SD 13.9] years, 58.7% female). During a median follow-up of 9.94 years, 645 cases of T2DM occurred. Compared with participants with a poor HLS, those with 4-5 low-risk lifestyle factors showed a 60% reduction in the risk of developing T2DM (adjusted HR, 0.40; 95% CI: 0.28-0.57). Further, the population-attributable risk percent (95% CI) of T2DM for poor adherence to the overall healthy lifestyle (< 4 low-risk factors) was 43.24% (30.02%, 56.46%). The HLS was inversely associated with SUA level. With per score increased in HLS, the beta (95% CI) of SUA (log transformed) was - 0.03 (- 0.03, - 0.02), and the odds ratio (95% CI) of hyperuricemia was 0.82 (0.77, 0.86). The relationship between the HLS and risk of T2DM was mediated by SUA with a 13.06% mediation effect. There was no significant combined effect of HLS and SUA on risk of T2DM (P = 0.097). CONCLUSIONS: The relationship between overall healthy lifestyle behaviors and T2DM was reconfirmed and the association appeared to be mediated by SUA. The mediation effect of baseline SUA was more pronounced among women who were below 60 years old.

Divergence and convergence of gut microbiomes of wild insect pollinators.

Pollination services provided by wild insect pollinators are critical to natural ecosystems and crops around the world. There is an increasing appreciation that the gut microbiota of these insects influences their health and consequently their services. However, pollinator gut microbiota studies have focused on well-described social bees, but rarely include other, more phylogenetically divergent insect pollinators. To expand our understanding, we explored the insect pollinator microbiomes across three insect orders through two DNA sequencing approaches. First, in an exploratory 16S amplicon sequencing analysis of taxonomic community assemblages, we found lineage-specific divergences of dominant microbial genera and microbiota community composition across divergent insect pollinator genera. However, we found no evidence for a strong broad-scale phylogenetic signal, which we see for community relatedness at finer scales. Subsequently, we utilized metagenomic shotgun sequencing to obtain metagenome-assembled genomes and assess the functionality of the microbiota from pollinating flies and social wasps. We uncover a novel gut microbe from pollinating flies in the family Orbaceae that is closely related to Gilliamella spp. from social bees but with divergent functions. We propose this novel species be named Candidatus Gilliamella eristali. Further metagenomes of dominant fly and wasp microbiome members suggest that they are largely not host-insect adapted and instead may be environmentally derived. Overall, this study suggests selective processes involving ecology or physiology, or neutral processes determining microbe colonization may predominate in the turnover of lineages in insect pollinators broadly, while evolution with hosts may occur only under certain circumstances and on smaller phylogenetic scales. IMPORTANCE Wild insect pollinators provide many key ecosystem services, and the microbes associated with these insect pollinators may influence their health. Therefore, understanding the diversity in microbiota structure and function, along with the potential mechanisms shaping the microbiota across diverse insect pollinators, is critical. Our study expands beyond existing knowledge of well-studied social bees, like honey bees, including members from other bee, wasp, butterfly, and fly pollinators. We infer ecological and evolutionary factors that may influence microbiome structure across diverse insect pollinator hosts and the functions that microbiota members may play. We highlight significant differentiation of microbiomes among diverse pollinators. Closer analysis suggests that dominant members may show varying levels of host association and functions, even in a comparison of closely related microbes found in bees and flies. This work suggests varied importance of ecological, physiological, and non-evolutionary filters in determining structure and function across largely divergent wild insect pollinator microbiomes.

Diversified Shifts in the Cross Talk between Members of the Gut Microbiota and Development of Coronary Artery Diseases.

Coronary artery disease (CAD) is one of leading causes of mortality worldwide. Studies on roles that the gut microbiota plays in development of atherosclerosis or acute myocardial infarction (AMI) have been widely reported. However, the gut microbiota is affected by many factors, including age, body mass index (BMI), and hypertension, that lead to high CAD risk. However, the associations between gut microbiota and CAD development or other CAD risk factors remain unexplored. Here, we performed a 16S RNA gene sequencing analysis of 306 fecal samples collected from patients with mild coronary stenosis (MCS; n = 36), stable angina (SA; n = 91), unstable angina (UA; n = 48), and acute myocardial infarction (AMI; n = 66) and 65 non-CAD controls. Using a noise-corrected method based on principal-component analysis (PCA) and the random forest algorithm, we identified the interference with gut microbial profiling of multiple factors (including age, gender, BMI, and hypertension) that potentially contributed significantly to the development of CAD. After correction of noise interference from certain interfering factors, we found consistent indicator microbiota organisms (such as Vampirovibrio, Ruminococcus, and Eisenbergiella) associated with the presence of MCS, SA, and AMI. Establishment of a diagnostic model revealed better performance in early CAD than clinical indexes with indicator microbes. Furthermore, indicator microbes can improve the accuracy of clinical indexes for the diagnosis of AMI. Additionally, we found that the microbial indicators of AMI Sporobacter and Eisenbergiella showed consistent positive and negative correlations to the clinical indexes creatine kinase (CK) and hemoglobin (Hb), respectively. As a control indicator of AMI, Dorea was negatively correlated with CK but positively correlated with Hb. IMPORTANCE Our study discovered the effect of confounding factors on gut microbial variations and identified gut microbial indicators possibly associated with the CAD development after noise correction. Our discovered indicator microbes may have potential for diagnosis or therapy of cardiovascular disorders.

The Long-Term Mechanical Properties of BS Perpendicular to the Grain.

As a modern bamboo composite with good mechanical properties, bamboo scrimber (BS) has achieved prominence in the sustainable architecture field. When used as a structural material, it is inevitably under continual tension perpendicular to the grain, therefore its mechanical response under long-term loading is significant for structural design. In this study, tensile tests were conducted on BS under short-term and long-term loads perpendicular to the grain. The duration of load (DOL) effect on BS perpendicular to grain and its creep effect were analyzed. Compared with BS parallel to the grain, the DOL effect on BS perpendicular to the grain was less severe, and the capacity for creep resistance was weaker. The threshold stress ratio and relative creep strain of BS perpendicular to the grain were 0.40 and 0.87, respectively. It was found that the DOL models and the viscoelastic model accurately predicted the DOL factor and creep strain. This study provides a scientific reference for the safe lifetime service of BS in practical engineering.

Compressive Failure Mechanism of Structural Bamboo Scrimber.

Bamboo scrimber is one of the most popular engineering bamboo composites, owing to its excellent physical and mechanical properties. In order to investigate the influence of grain direction on the compression properties and failure mechanism of bamboo scrimber, the longitudinal, radial and tangential directions were selected. The results showed that the compressive load-displacement curves of bamboo scrimber in the longitudinal, tangential and radial directions contained elastic, yield and failure stages. The compressive strength and elastic modulus of the bamboo scrimber in the longitudinal direction were greater than those in the radial and tangential directions, and there were no significant differences between the radial and tangential specimens. The micro-fracture morphology shows that the parenchyma cells underwent brittle shear failure in all three directions, while the fiber failure of the longitudinal compressive specimens consisted of ductile fracture, and the tangential and radial compressive specimens exhibited brittle fracture. This is one of the reasons that the deformation of the specimens under longitudinal compression was greater than those under tangential and radial compression. The main failure mode of bamboo scrimber under longitudinal and radial compression was shear failure, and the main failure mode under tangential compression was interlayer separation failure. The reason for this difference was that during longitudinal and radial compression, the maximum strain occurred at the diagonal of the specimen, while during tangential compression, the maximum strain occurred at the bonding interface. This study can provide benefits for the rational design and safe application of bamboo scrimber in practical engineering.

Analysis and Calculation of Stability Coefficients of Cross-Laminated Timber Axial Compression Member.

Cross-laminated timber (CLT) elements are becoming increasingly popular in multi-storey timber-based structures, which have long been built in many different countries. Various challenges are connected with constructions of this type. One such challenge is that of stabilizing the structure against vertical loads. However, the calculations of the stability bearing capacity of the CLT members in axial compression in the structural design remains unsolved in China. This study aims to determine the stability bearing capacity of the CLT members in axial compression and to propose the calculation method of the stability coefficient. First, the stability coefficient calculation theories in different national standards were analyzed, and then the stability bearing capacity of CLT elements with four slenderness ratios was investigated. Finally, based on the stability coefficient calculation formulae in the GB 50005-2017 standard and the regression method, the calculation method of the stability coefficient for CLT elements was proposed, and the values of the material parameters were determined. The result shows that the average deviation between fitting curve and calculated results of European and American standard is 5.43% and 3.73%, respectively, and the average deviation between the fitting curve and the actual test results was 8.15%. The stability coefficients calculation formulae could be used to predict the stability coefficients of CLT specimens with different slenderness ratios well.

Gluing Techniques on Bond Performance and Mechanical Properties of Cross-Laminated Timber (CLT) Made from Larix kaempferi.

Previous studies have proved that Larix kaempferi is a good material for preparing cross-laminated timber (CLT), but under bending shear stress, CLT made by Larix kaempferi is prone to the phenomenon of bonding face cracking, which seriously affects the shear performance of CLT. To solve this problem, this paper took Larix kaempferi as raw material, conducted experiments on the surface sanding conditions, gluing pressure and adhesive types of sawing timber, and explored the influence of these three factors on the bonding quality of CLT. The microscopic characteristics of the bonding layer were further studied. The results showed that for Larix kaempferi with a density of 0.68 g/cm3 used in this experiment, a high bonding pressure is required. Among the three cold curing adhesives selected in the experiment, emulsion polymer isocyanate (EPI) adhesive needs 1.5 MPa bonding pressure to ensure the bonding quality, while for polyurethane (PUR) and phenol resorcinol formaldehyde (PRF), 1.2 MPa can meet the need of adhesive pressure. This is concerned with the permeability of different adhesives under different pressures. The microscopic results of the bonding layer show that EPI adhesives have poor permeability, so it requires high bonding pressure. The influence of sanding surface of different sand-belt on block shear strength (BSS) and wood failure percentage (WFP) is not obvious, while the durability of bonding layer is better when sanding mesh number is 100. Hence, a high pressure should be used for CLT industrial production when the laminate density is higher, especially when the adhesive has poor permeability. Reasonable sanding surface treatment can be used in laminate surface treatment to improve the durability of CLT.

Effect of Air Oxidation on Texture, Surface Properties and Dye Adsorption of Wood-Derived Porous Carbon Materials.

Hierarchical porous carbon materials made from cork were fabricated using a facile and green method combined with air activation, without any templates and chemical agents. The influence of air activation on the texture and other surface characteristics of the carbon materials were evaluated by various characterization techniques. Results indicate that air oxidation can effectively improve the surface area and the hierarchical porous structure of carbon materials, as well as increase the number of oxygen-containing functional groups on the carbon surface. The specific surface area and the pore volume of the carbon material activated by air at 450 °C (C800-M450) can reach 580 m2/g and 0.379 cm3/g, respectively. These values are considerably higher than those for the non-activated material (C800, 376 m2/g, 0.201 cm3/g). The contents of the functional groups (C-O, C=O and O-H) increased with rising activation temperature. After air activation, the adsorption capacity of the carbon materials for methylene blue (MB) and methyl orange (MO) was increased from 7.7 and 6.4 mg/g for C800 to 312.5 and 97.1 mg/g for C800-M450, respectively. The excellent dye removal of the materials suggests that the porous carbon obtained from biomass can be potentially used for wastewater treatment.

Effects of Temperature on the Compressive Strength Parallel to the Grain of Bamboo Scrimbe.

The objective of this study was to investigate the compressive strength parallel to the grain of bamboo scrimber during and after exposure to various temperatures, in a range from 20 to 225 °C. These data were used to provide a basis for the evaluation of the fire performance of bamboo structures. A total of 152 specimens, assembled as group "during-fire" and "post-fire", were tested during and after exposure to high temperatures. The experimental results indicated that there were significant differences in compressive properties between the "during-fire" and "post-fire" groups. At one temperature level, the compressive strength and modulus of elasticity of the "post-fire" group were significantly higher than those properties of the "during fire" group, but the ductility coefficient was reversed. FTIR analysis results showed that 175 °C was a key turning point, at which thermal decomposition occurred in the cellulose of the bamboo and phenolic resin.

Experimental and Statistical Evaluation of the Size Effect on the Bending Strength of Dimension Lumber of Northeast China Larch.

This study investigated the size effect on the bending strength (modulus of rupture-MOR) of dimension lumber of Northeast China larch (Larix gmelinii); providing a basis for the further application in light wood frame construction. Experimental and statistical evaluations were conducted on the bending strength. A total of 2409 full-size dimension lumber samples were tested by static bending tests; which included three different sizes: 2 × 3; 2 × 4; and 2 × 6. Results indicate that the size has a significant effect on the MOR. Both the chi-square (χ²) and Kolmogorov-Smirnov (K-S) test results show that the lognormal distribution generally fits to the MOR better than to the normal distribution. Additionally; the effects of partial safety factor (γR) and live-to-dead load ratio (ρ) were studied by reliability analysis. Reliability analysis results indicate that the reliability index increases nonlinearly with the decrease of γR and the rise of ρ. Finally; the design value of bending strength and its adjusting factor of size effect of 2 × 3; 2 × 4; and 2 × 6 larch dimension lumber were obtained according to the Chinese National Standards' requirements of the reliability index.

[Pothole ecosystem in mountain river: A review].

The pothole is one of the special habitats in river ecosystems, which is simply structured, well-defined, food chain-short, and easily controlled, thus making it a model system in ecological, evolutionary and phenological studies. Here we first reviewed hydrological, chemical and physical characteristics of potholes, their biological community (biodiversity, environmental factors) as well as food chain (competition, predation and parasitism) in mountain rivers. The differences between pothole ecosystems and river ecosystems in hydrological characteristics, biological community and food-chain were analyzed. Hydrological, physical chemical, and ecological characteristics of potholes were largely unexplored in China. Finally, we suggested future directions and recommendations in pothole ecosystems.

Cellulose structure and lignin distribution in normal and compression wood of the Maidenhair tree (Ginkgo biloba L.).

We studied in detail the mean microfibril angle and the width of cellulose crystals from the pith to the bark of a 15-year-old Maidenhair tree (Ginkgo biloba L.). The orientation of cellulose microfibrils with respect to the cell axis and the width and length of cellulose crystallites were determined using X-ray diffraction. Raman microscopy was used to compare the lignin distribution in the cell wall of normal/opposite and compression wood, which was found near the pith. Ginkgo biloba showed a relatively large mean microfibril angle, varying between 19° and 39° in the S2 layer, and the average width of cellulose crystallites was 3.1-3.2 nm. Mild compression wood without any intercellular spaces or helical cavities was observed near the pith. Slit-like bordered pit openings and a heavily lignified S2L layer confirmed the presence of compression wood. Ginkgo biloba showed typical features present in the juvenile wood of conifers. The microfibril angle remained large over the 14 annual rings. The entire stem disc, with a diameter of 18 cm, was considered to consist of juvenile wood. The properties of juvenile and compression wood as well as the cellulose orientation and crystalline width indicate that the wood formation of G. biloba is similar to that of modern conifers.

[Distribution and species composition of hyporheic macroinvertebrates in a mountain stream].

Hyporheic macroinvertebrates are an important component of stream ecosystem. The composition and distribution of the hyporheic macroinvertebrates were investigated using artificial substrates in the upper reaches of Heishuitan River in August, December 2013 and April 2014. The results indicated that a total of 27 microinvertbrate species were identified in all three seasons. In summer, 22 species were identified, accounting for 81.8% of aquatic insects. 16 species were identified both in winter and spring, accounting for 75.0% and 62.5% of aquatic insects, respectively. The density of macroinvertebrate assemblage was significantly lower in summer than in winter and spring, and was the highest in spring. The biomass of macroinvertebrate assemblage was significantly higher in winter than in summer and spring, and was the lowest in summer. Species richness, Shannon index and Pielou index all had no significant difference among the three seasons. The density and richness of macroinvertebrates decreased with bed depth, and the maximum invertebrate density was found within the top 20 cm of the stream bed. Collector-filterer and collector-gatherer were the dominant functional feeding group in all three seasons. The community structure and temporal-spatial distribution of macroinvertebrates were determined by interactions and life history strategy of macroinvertebrates, and physical-chemical factors of hyporheic zone.

Parallel sites implicate functional convergence of the hearing gene prestin among echolocating mammals.

Echolocation is a sensory system whereby certain mammals navigate and forage using sound waves, usually in environments where visibility is limited. Curiously, echolocation has evolved independently in bats and whales, which occupy entirely different environments. Based on this phenotypic convergence, recent studies identified several echolocation-related genes with parallel sites at the protein sequence level among different echolocating mammals, and among these, prestin seems the most promising. Although previous studies analyzed the evolutionary mechanism of prestin, the functional roles of the parallel sites in the evolution of mammalian echolocation are not clear. By functional assays, we show that a key parameter of prestin function, 1/α, is increased in all echolocating mammals and that the N7T parallel substitution accounted for this functional convergence. Moreover, another parameter, V1/2, was shifted toward the depolarization direction in a toothed whale, the bottlenose dolphin (Tursiops truncatus) and a constant-frequency (CF) bat, the Stoliczka's trident bat (Aselliscus stoliczkanus). The parallel site of I384T between toothed whales and CF bats was responsible for this functional convergence. Furthermore, the two parameters (1/α and V1/2) were correlated with mammalian high-frequency hearing, suggesting that the convergent changes of the prestin function in echolocating mammals may play important roles in mammalian echolocation. To our knowledge, these findings present the functional patterns of echolocation-related genes in echolocating mammals for the first time and rigorously demonstrate adaptive parallel evolution at the protein sequence level, paving the way to insights into the molecular mechanism underlying mammalian echolocation.

[Research advances in macroinvertebrate ecology of the stream hyporheic zone].

The stream hyporheic zone is an ecotone of surface water-ground water interactions, which is rich in biodiversity, and is an important component of stream ecosystem. The macroinvertebrates, which are at the top of food webs in the hyporheic zone to directly influence the matter and energy dynamics of the hyporheic zone, and are potential indicators of river ecological health to adjust the function of environment purification and ecological buffer. The macroinvertebrates in the hyporheic zone are divided into three categories: stygoxenes, stygophiles and stygobites. The key factors which influenced macroinvertebrates distribution in the hyporheic zone are physical size of interstitial spaces, interstitial current velocity, dissolved oxygen (DO), water temperature, available organic matter, hydraulic conductivity and hydraulic retention time. A suitable sampling method should be used for diverse research purposes in the special ecological interface. In the future, some necessary researches should focus on the life-history and life history strategy of the macroinvertebrates in the hyporheic zone, the quantitative analysis on the matter and energy dynamics in the ecological system of stream, the assessment systems of river ecological health based on the macroinvertebrates of the stream hyporheic zone, and the ecological significance of the hyporheic zone as a refuge for distribution and evolution of the macroinvertebrates.

Large-scale survey of gut microbiota associated with MHE Via 16S rRNA-based pyrosequencing.

OBJECTIVES: Elucidating the minimal hepatic encephalopathy (MHE)-associated gut microbiome may help in predicting and lowering the high risk for MHE in patients with cirrhosis. METHODS: Twenty-six MHE patients were recruited and screened from among those with liver cirrhosis without overt hepatic encephalopathy as defined by abnormality seen on two test modalities: number connection test part A and the digit symbol test. Using 26 MHE-matched normal relatives and 25 cirrhotic patients without MHE as controls, by means of 16S ribosomal RNA (rRNA)-based pyrosequencing, we examined and analyzed 241,622 bacterial 16S rDNA gene sequences from feces of 77 subjects. RESULTS: Using multiple comparative analyses, our results found the continuous overrepresentation of two bacterial families, Streptococcaceae and Veillonellaceae, in cirrhotic patients with and without MHE, compared with normal individuals. In addition, we also discovered an MHE-unique interplay pattern of gut microbiota largely influenced by the members of those two families. Following these findings, we further revealed that gut urease-containing bacteria Streptococcus salivarius was absent in the normal group but was present in cirrhotic patients with and without MHE. The abundance of S. salivarius was significantly higher in cirrhotic patients with MHE than in those without (P=0.030), and the change in the amount of this bacteria was positively correlated with ammonia accumulation (R=0.58, P=0.003) in cirrhotic patients with MHE but not in those without. CONCLUSIONS: Gut microbiota dysbiosis may be associated with the presence of MHE in cirrhotic patients, in particular with ammonia-increasing phenotype in MHE. Gut ammonia-increasing bacteria S. salivarius might be expected to be a potential biomarker of ammonia-lowering therapies in cirrhotic patients with MHE.

[Investigation of characteristic microstructures of adhesive interface in wood/bamboo composite material by synchrotron radiation X-ray phase contrast microscopy].

Third-generation synchrotron radiation X-ray phase-contrast microscopy(XPCM)can be used for obtaining image with edge enhancement, and achieve the high contrast imaging of low-Z materials with the spatial coherence peculiarity of X-rays. In the present paper, the characteristic microstructures of adhesive at the interface and their penetration in wood/bamboo composite material were investigated systematically by XPCM at Shanghai Synchrotron Radiation Facility (SSRF). And the effect of several processing techniques was analyzed for the adhesive penetration in wood/bamboo materials. The results show that the synchrotron radiation XPCM is expected to be one of the important precision detection methods for wood-based panels.

[Distribution of lignin in Chinese fir branches determined by ultraviolet microspectrometer].

Distribution of lignin in the cell walls of Chinese fir branches emerged in the spring season were first studied by using ultraviolet microscope based on their cell microstructure observation and lignin qualitative measurement by the lightmicroscope and confocal laser scanning microscope. The results showed that the contents of lignin are inhomogeneously distributed in different micro-areas of the cell walls. The order of lignin concentrations is the cell corner>the middle lamellar>the secondary with the absorbance values of ultraviolet wave of 0.489, 0.307 and 0.278, respectively. The result of quantitative analysis consists with that of qualitative analysis. A new measurement method was proposed to study the distribution of lignin content in wood cell walls in CFhina.

Cell wall structure and formation of maturing fibres of moso bamboo (Phyllostachys pubescens) increase buckling resistance.

The mechanical stability of the culms of monocotyledonous bamboos is highly attributed to the proper embedding of the stiff fibre caps of the vascular bundles into the soft parenchymatous matrix. Owing to lack of a vascular cambium, bamboos show no secondary thickening growth that impedes geometrical adaptations to mechanical loads and increases the necessity of structural optimization at the material level. Here, we investigate the fine structure and mechanical properties of fibres within a maturing vascular bundle of moso bamboo, Phyllostachys pubescens, with a high spatial resolution. The fibre cell walls were found to show almost axially oriented cellulose fibrils, and the stiffness and hardness of the central part of the cell wall remained basically consistent for the fibres at different regions across the fibre cap. A stiffness gradient across the fibre cap is developed by differential cell wall thickening which affects tissue density and thereby axial tissue stiffness in the different regions of the cap. The almost axially oriented cellulose fibrils in the fibre walls maximize the longitudinal elastic modulus of the fibres and their lignification increases the transverse rigidity. This is interpreted as a structural and mechanical optimization that contributes to the high buckling resistance of the slender bamboo culms.