RESUMEN
The construction of heterostructure photoelectrodes can enhance the performance of photoelectrochemical (PEC) sensors. However, it is still a critical challenge to achieve efficient transfer of interface carriers. In this paper, we propose a strategy of "photo-modulated interface charge" to design a PEC sensor based on a hollow hexagonal tubular In2S3/AgInS2 in situ Z-type heterojunction for the susceptible detection of Programmed Death-ligand 1 (PD-L1). The hollow structured In2S3/AgInS2 is ingeniously synthesized employing indium-sourced MIL-68 as a sacrificial template and in situ cation exchange technique. This composite material has close contact interfaces due to in situ growth, which facilitates the spontaneous establishment of a robust and stable built-in electric field between the interfaces. Moreover, the inner cavity structure promotes multiple light refractions and scatterings, significantly enhancing light trapping capability. Under the influence of both light irradiation and electric field force, the migration direction of the interfacial charge is reversed, forming a Z-transfer path, which effectively delays the compounding of the electron-hole pairs (e-/h+) and further improves the sensitivity of the sensor. The minimum detection threshold of the PEC sensor is 26.58 fg/mL, and the feasibility of real samples is investigated, providing new insights for early diagnosis and prognostic treatment of diseases.
RESUMEN
Strigolactones(SLs), carotenoid-derived plant hormones, govern the growth and development of both monocotyledonous and dicotyledonous plants. DWARF27 (D27), a plastid-targeted protein located at the initiation site of the core pathway in SL synthesis, plays a crucial role in regulating plant tillering (branching). In rice (Oryza sativa) and wheat (Triticum aestivum), OsD27 and TaD27-B proteins modulate the number of plant tillers by participating in SL biosynthesis. Similarly, AtD27 in Arabidopsis thaliana is required for SL production and has a significant impact on phenotypic changes related to branching. At the same time, TaD27 in wheat has been confirmed as a functional ortholog of AtD27 in Arabidopsis, and both P. juncea and wheat belong to the Triticeae, so we speculate that PjD27 gene may also have the same function as AtD27 in Arabidopsis. In this study, we initially screened the PjD27 gene significantly associated with tillering regulation through transcriptome data analysis and subsequently validated its expression levels using qRT-PCR analysis. Furthermore, we conducted phylogenetic analysis using amino acid sequences from 41 species, including P. juncea, to identify closely related species of P. juncea. Here, we analyze the conservation of D27 protein among P. juncea, rice, wheat, and Arabidopsis and provide preliminary evidence suggesting that PjD27 protein is an ortholog of D27 protein in Arabidopsis. Through reverse genetics, we demonstrate the crucial role of PjD27 in regulating plant branching, establishing it as a functional ortholog of D27 in Arabidopsis. Furthermore, following transient expression in tobacco (Nicotiana tabacum), we demonstrate that the subcellular location of the PjD27 protein is consistent with the cellular location of TaD27-B in wheat. Quantitative analysis of SLs shows that PjD27 is a key gene regulating tillering (branching) by participating in SLs biosynthesis. By elucidating the function of the PjD27 gene, our findings provide valuable genetic resources for new germplasm creation and improving grain yield in P. juncea.
RESUMEN
A novel photocatalytic palladium-induced 6-endo-selective alkyl Heck reaction of unactivated alkyl iodides and alkyl bromides has been described. This strategy facilitates the gentle and efficient synthesis of a variety of 5-phenyl-1,2,3,6-tetrahydropyridine derivatives. It demonstrates a broad substrate tolerance and excellent 6-endo selectivity. Unlike the high-temperature requirements of traditional alkyl Heck reactions, this transformation efficiently proceeds at room temperature and shows significant promise for industrial-scale applications. Mechanistic investigations reveal that this alkyl Heck reaction proceeds via a hybrid palladium-radical process.
RESUMEN
This paper introduces an automatic intelligent design method for the modified uni-traveling carrier photodetector (MUTC-PD). The conventional photodetector design process often relies on the numerical solution of complex nonlinear partial differential equations to simulate and optimize device performance, which is not only computationally intensive but also inefficient. To overcome this challenge, we apply the charge control principle to calculate the photodetector bandwidth, which improves the computational speed by a factor of approximately 1800 compared to the numerical solution of nonlinear partial differential equations. To further optimize the structure of the photodetector, we incorporate the Velocity Varying Climbing Particle Swarm Optimization (VVCPSO) algorithm. This is an improved algorithm based on the traditional particle swarm algorithm, which is able to quickly find the optimal solution in a complex parameter space. By applying the VVCPSO algorithm, we successfully fine-tuned the photodetector structure and obtained structural parameters with optimal performance. Our thorough verification process confirms that the proposed method is consistent with the results of ATLAS simulation software. Automated design has resulted in a high-performance MUTC-PD with a responsivity of 0.52A/W and a bandwidth of 60â GHz (@-3â V) at a mesa diameter of 16µm. Compared to the pre-optimized device, the bandwidth is increased to three times the original. By reducing the mesa diameter to 4µm, the bandwidth can be further increased to 82â GHz (@-3â V). The proposed method's calculation speed is fast enough, enabling extensive parameter studies to optimize device performance.
RESUMEN
3D assembly technology is a cutting-edge methodology for constructing high-performance and multifunctional photodetectors since some attractive photodetection features such as light trapping effect, omnidirectional ability, and high spatial resolution can be introduced. However, there has not been any report of 3D-assembled multimode photodetectors owing to the lack of design and fabrication guideline of electrodes serving for 3D heterostructures. In this study, a 3D-assembled dual-mode photodetector (3DdmPD) was realized successfully via the clever electrical contact between the rolled-up tubular graphene/GaAs/InGaAs heterostructure and planar metal electrode. Arbitrary switching of three coplanar electrodes makes the as-fabricated tubular 3D photodetector work at the unbiased photodiode mode, which is suitable for energy conservation high-speed photodetection, or the biased photoconductive mode, which favors extremely weak light photodetection, fully showing the advantages of multifunctional detection. In more detail, the Ilight/Idark ratio reached as high as 2 × 104, and a responsivity of 42.3 mA/W, a detectivity of 1.5 × 1010 Jones, as well as a rising/falling time (τr/τf) of 360/370 µs were achieved under the self-driven photodiode mode. Excitingly, 3DdmPD shows omnidirectional photodetection ability at the same time. When 3DdmPD works at the photoconductive mode with 5 V bias, its responsivity is extremely high as 7.9 × 104 A/W and corresponding detectivity is increased to 1.0 × 1011 Jones. Benefiting from the totally independent coplanar electrodes, 3DdmPD is much more easily integrated as arrays that are expected to offer the function of high-speed omnidirectional image-sensing with ultralow power consumption than the planar counterparts which share communal bottom electrodes. We believe that our work can contribute to the progress of 3D-assembled optoelectronic devices.
RESUMEN
Drought stress inhibits seed germination, plant growth and development of tobacco, and seriously affects the yield and quality of tobacco leaves. However, the molecular mechanism underlying tobacco drought stress response remains largely unknown. In this study, integrated analysis of transcriptome and metabolome was performed on the germinated seeds of a cultivated variety K326 and its EMS mutagenic mutant M28 with great drought tolerance. The result showed that drought stress inhibited seed germination of the both varieties, while the germination rate of M28 was faster than that of K326 under drought stress. Besides, the levels of phytohormone ABA, GA19, and zeatin were increased by drought stress in M28. Five vital pathways were identified through integrated transcriptomic and metabolomic analysis, including zeatin biosynthesis, aspartate and glutamate synthesis, phenylamine metabolism, glutathione metabolism, and phenylpropanoid synthesis. Furthermore, 20 key metabolites in the above pathways were selected for further analysis of gene modular-trait relationship, and then four highly correlated modules were found. Then analysis of gene expression network was carried out of Top30 hub gene of these four modules, and 9 key candidate genes were identified, including HSP70s, XTH16s, APX, PHI-1, 14-3-3, SCP, PPO. In conclusion, our study uncovered some key drought-responsive pathways and genes of tobacco during seeds germination, providing new insights into the regulatory mechanisms of tobacco drought stress response.
Asunto(s)
Germinación , Transcriptoma , Germinación/genética , Sequías , Zeatina/metabolismo , Semillas/metabolismo , Metaboloma , Regulación de la Expresión Génica de las Plantas , Estrés Fisiológico/genéticaRESUMEN
The environmental risks resulting from the increasing antivirals in water are largely unknown, especially in eutrophic lakes, where the complex interactions between algae and drugs would alter hazards. Herein, the environmental risks of the antiviral drug arbidol towards the growth and metabolism of Microcystis aeruginosa were comprehensively investigated, as well as its biotransformation mechanism by algae. The results indicated that arbidol was toxic to Microcystis aeruginosa within 48 h, which decreased the cell density, chlorophyll-a, and ATP content. The activation of oxidative stress increased the levels of reactive oxygen species, which caused lipid peroxidation and membrane damage. Additionally, the synthesis and release of microcystins were promoted by arbidol. Fortunately, arbidol can be effectively removed by Microcystis aeruginosa mainly through biodegradation (50.5% at 48 h for 1.0 mg/L arbidol), whereas the roles of bioadsorption and bioaccumulation were limited. The biodegradation of arbidol was dominated by algal intracellular P450 enzymes via loss of thiophenol and oxidation, and a higher arbidol concentration facilitated the degradation rate. Interestingly, the toxicity of arbidol was reduced after algal biodegradation, and most of the degradation products exhibited lower toxicity than arbidol. This study revealed the environmental risks and transformation behavior of arbidol in algal bloom waters.
Asunto(s)
Indoles , Lagos , Microcystis , Sulfuros , Clorofila A , Antivirales/toxicidad , Microcistinas/toxicidad , Microcistinas/metabolismoRESUMEN
17α-ethinylestradiol (EE2), a synthetic endocrine-disrupting chemical, can degrade in natural waters where humic acids (HA) and dissolved iron (DFe) are present. The iron is mostly bound in Fe(III)-HA complexes, the formation process of Fe(III)-HA complexes and their effect on EE2 degradation were explored in laboratory experiments. The mechanism of ferrihydrite facilitated by HA was explored with results indicating that HA facilitated the dissolution of ferrihydrite and the generation of Fe(III)-HA complexes with the stable chemical bonds such as C-O, CO in neutral, alkaline media with a suitable Fe/C ratio. 1O2, â¢OH, and 3HA* were all found to be important in the photodegradation of EE2 mediated by Fe(III)-HA complexes. Fe(III)-HA complexes could produce Fe(II) and hydrogen peroxide (H2O2) to create conditions suitable for photo-Fenton reactions at neutral pH. HA helped to maintain higher dissolved iron concentrations and alter the Fe(III)/Fe(II) cycling. The natural EE2 photodegradation pathway elucidated here provides a theoretical foundation for investigating the natural transformation of other trace organic contaminants in aquatic environments.
RESUMEN
Dissolved organic matter (DOM) and iron minerals widely existing in the natural aquatic environment can mediate the migration and transformation of organic pollutants. However, the mechanism of interaction between DOM and iron minerals in the microbial degradation of pollutants deserves further investigation. In this study, the mechanism of 17 alpha-ethinylestradiol (EE2) biodegradation mediated by humic acid (HA) and three kinds of iron minerals (goethite, magnetite, and pyrite) was investigated. The results found that HA and iron minerals significantly accelerated the biodegradation process of EE2, and the highest degradation efficiency of EE2 (48%) was observed in the HA-mediated microbial system with pyrite under aerobic conditions. Furthermore, it had been demonstrated that hydroxyl radicals (HOâ¢) was the main active substance responsible for the microbial degradation of EE2. HO⢠is primarily generated through the reaction between hydrogen peroxide secreted by microorganisms and Fe(II), with aerobic conditions being more conducive. The presence of iron minerals and HA could change the microbial communities in the EE2 biodegradation system. These findings provide new information for exploring the migration and transformation of pollutants by microorganisms in iron-rich environments.
Asunto(s)
Materia Orgánica Disuelta , Contaminantes Ambientales , Hierro , Minerales , Sustancias Húmicas , Etinilestradiol/análisis , Oxidación-ReducciónRESUMEN
Higher-order interactions improve our capability to model real-world complex systems ranging from physics and neuroscience to economics and social sciences. There is great interest nowadays in understanding the contribution of higher-order terms to the collective behavior of the network. In this work, we investigate the stability of complete synchronization of complex networks with higher-order structures. We demonstrate that the synchronization level of a network composed of nodes interacting simultaneously via multiple orders is maintained regardless of the intensity of coupling strength across different orders. We articulate that lower-order and higher-order topologies work together complementarily to provide the optimal stable configuration, challenging previous conclusions that higher-order interactions promote the stability of synchronization. Furthermore, we find that simply adding higher-order interactions based on existing connections, as in simple complexes, does not have a significant impact on synchronization. The universal applicability of our work lies in the comprehensive analysis of different network topologies, including hypergraphs and simplicial complexes, and the utilization of appropriate rescaling to assess the impact of higher-order interactions on synchronization stability.
RESUMEN
Psathyrostachys juncea is a long-lived perennial Gramineae grass with dense basal tillers and soft leaves. It is used widely in cold and dry areas of Eurasia and North America to establish grazing pasture and is even used as an ideal plant for revegetation and ecological restoration. Plant architecture, especially tillering traits, is critical for bunch grasses in breeding programs, and these traits in plants are mostly quantitative traits. In this study, the genetic diversity, population structure, and linkage disequilibrium of 480 individual lines were analyzed using 127 pairs of the EST-SSR marker, and a significant association between ten plant-architecture-related traits of P. juncea and molecular markers was found. The results of the genetic diversity analysis showed that the number of observed alleles was 1.957, the number of effective alleles was 1.682, Shannon's information index was 0.554, observed heterozygosity was 0.353, expected heterozygosity was 0.379, and the polymorphism information content was 0.300. A total of 480 individual lines were clustered into five groups based on population genetic structure, principal coordinate analysis, and unweighted pair group method with arithmetic mean analysis (UPGMA). The linkage disequilibrium coefficient (r2) was between 0.00 and 0.68, with an average of 0.04, which indicated a relatively low level of linkage disequilibrium among loci. The results of the association analysis revealed 55 significant marker-trait associations (MTA). Moreover, nine SSR markers were associated with multiple traits. This study provides tools with promising applications in the molecular selection and breeding of P. juncea germplasm.
Asunto(s)
Variación Genética , Fitomejoramiento , Marcadores Genéticos , Fenotipo , PoaceaeRESUMEN
OBJECTIVE: To study the effective method of comprehensive evaluation and analysis of hospital valuable medical equipment performance. METHODS: The operation performance of 6 valuable equipment was evaluated by cost-benefit method, comprehensive index method and public evaluation method. RESULTS: Utilize equipment information management methods for data collection and evaluation, and construct an assessment data model based on evaluation indicators from three aspects: equipment operation status, profitability status, and scientific research contribution. CONCLUSIONS: Through the performance analysis of different types of valuable medical equipment, a more real and comprehensive quantitative analysis is carried out, which plays a key role in the reasonable purchase, efficient operation and avoiding idling.
Asunto(s)
Equipos y Suministros de Hospitales , Hospitales , Recolección de Datos , Gestión de la Información , Equipo QuirúrgicoRESUMEN
A topological photonic crystal InGaAsP/InP core-shell nanowire array laser operating in the 1550â nm wavelength band is proposed and simulated. The structure is composed of an inner topological nontrivial photonic crystal and outer topological trivial photonic crystal. For a nanowire with height of 8â µm, high quality factor of 4.7 × 104 and side-mode suppression ratio of 11â dB are obtained, approximately 32.9 and 5.5 times that of the uniform photonic crystal nanowire array, respectively. Under optical pumping, the topological nanowire array laser exhibits a threshold 27.3% lower than that of the uniform nanowire array laser, due to the smaller nanowire slit width and stronger optical confinement. Moreover, the topological NW laser exhibits high tolerence to manufacturing errors. This work may pave the way for the development of low-threshold single-mode high-robustness nanolasers.
RESUMEN
Insights into COVID-19 antivirals' environmental fate and ecological risk are urgently required due to their increasing concentrations in aquatic environments, which have rarely been studied. Herein, we first investigated the photochemical transformation and the resulting alterations in toxicity of arbidol, an antiviral drug with relatively higher toxicity. The photolysis of arbidol was rapid with a rate constant of 0.106 min-1 due to its superior ultraviolet light absorption, in which the direct photolysis was predominated with a contribution of 91.5%. Despite its substantial photolysis, only 14.45% of arbidol was mineralized after 100 min, implying that arbidol and its products might have a long-term impact on aquatic environment. It was inferred that arbidol was photolyzed mainly via the loss of thiophenol, bromine, and alkylamine, based on twelve photolytic products identified. Notably, the experimental results demonstrated that the photolysis process increased the acute toxicity of arbidol, and the toxicity prediction indicated that the ecotoxicity of two photolytic products was very high with LC50 values below 0.1 mg/L. Due to the co-effect of multiple constituents, the photolytic rate observed in wastewater treatment plant effluent and in river water was comparable to that in ultra-pure water, while it was slightly enhanced in lake water. The presence of dissolved organic matter suppressed arbidol photolysis, while NO3- exhibited a promotion effect. These results would be of great significance to assess the fate and risk of COVID-19 antivirals in natural aquatic environments.
Asunto(s)
COVID-19 , Contaminantes Químicos del Agua , Humanos , Luz Solar , Fotólisis , Agua , Antivirales , Contaminantes Químicos del Agua/análisisRESUMEN
Aims: NCF1, a subunit of the NADPH oxidase 2 (NOX2), first described the expression in neutrophils and macrophages and participated in the pathogenesis from various systems. However, there are controversial findings on the role of NCF1 in different kinds of kidney diseases. In this study, we aim to pinpoint the specific role of NCF1 in the progression of renal fibrosis induced by obstruction. Results: In this study, NCF1 expression was upregulated in kidney biopsies of chronic kidney disease patients. The expression level of all subunits of the NOX2 complex was also significantly increased in the unilateral ureteral obstruction (UUO) kidney. Then, we used wild-type mice and Ncf1 mutant mice (Ncf1m1j mice) to perform UUO-induced renal fibrosis. Results demonstrated that Ncf1m1j mice exhibited mild renal fibrosis but increased macrophages count and CD11b+Ly6Chi macrophage proportion. Next, we compared the renal fibrosis degree between Ncf1m1j mice and Ncf1 macrophage-rescued mice (Ncf1m1j.Ncf1Tg-CD68 mice). We found that rescuing NCF1 expression in macrophages further alleviated renal fibrosis and decreased macrophage infiltration in the UUO kidney. In addition, flow cytometry data showed fewer CD11b+Ly6Chi macrophages in the kidney of the Ncf1m1j.Ncf1Tg-CD68 group than the Ncf1m1j group. Innovation: We first used the Ncf1m1j mice and Ncf1m1j.Ncf1Tg-CD68 mice to detect the role of NCF1 in the pathological process of renal fibrosis induced by obstruction. Also, we found that NCF1 expressed in different cell types exerts opposing effects on obstructive nephropathy. Conclusion: Taken together, our findings support that systemic mutation of Ncf1 ameliorates renal fibrosis induced by obstruction, and rescuing NCF1 in macrophages further alleviates renal fibrosis.
RESUMEN
Purpose: Postural instability and decreased balance control ability have been observed in patients after anterior cruciate ligament (ACL) reconstruction. Herein, we examined the abnormal balance control mechanisms of these patients during dynamic reaching forward and quiet standing, providing a quantitative index for rehabilitation assessment. Methods: We enrolled ACL reconstruction patients 6-8 months after surgery, and 14 gender- and age-matched healthy volunteers. The IKDC and Lysholm were applied in each patient after ACL reconstruction. All participants conducted the quiet standing and reaching forward (RF) tests at the specified locations on force plates. The ground reaction force, center of pressure (COP), and kinematics signals were recorded. The maximal reach distance (MRD), speed of RF, length of COP, peak speed of COP in anterior-posterior direction (AP-COP), and weight bearing ratio (WBR) of the affected limb were calculated in the RF test. The COP speed, COP amplitude, frequency components of COP and WBR were extracted during quiet standing. Results: We observed that the speed of RF in the patients after ACL reconstruction was significantly lower than that of controls (p < 0.05). The COP length during RF was positively correlated with the Lysholm scale in the affected limb of patients (r = 0.604, p < 0.05). The peak of AP-COP speed during RF in the affected limb of patients was significantly lower than that of the healthy controls (p < 0.05), and positively correlated with the IKDC scale (r = 0.651, p < 0.05). WBR on the affected limb of patients during RF were significantly lower than that of controls (p < 0.05). The mean (r = -0.633, p < 0.05) and peak (r = -0.643, p < 0.05) speeds of COP during quiet standing were negatively correlated with the IKDC scale value. The amplitude of AP-COP on the contralateral side of patients was significantly higher than that of controls during quiet standing (p < 0.05). Conclusion: Patients after ACL reconstruction performed decreased postural control capacity, especially in dynamic balance, and were accompanied by deficiencies in proprioception. The COP length, peak speed of COP during RF and COP speed during quiet standing could be considered as quantitative index of balance function assessment after ACL reconstruction.
RESUMEN
The excellent photochemical properties of dissolved black carbon (DBC) have been proven to be a significant contributor to the removal of organic pollutants in environment. However, the photochemical properties of DBC will inevitably be changed during biotic and abiotic processes. Herein, the structures and compositions of DBC during bio-transformation and goethite adsorption processes were comprehensively studied, and their corresponding photochemical properties were also evaluated. Bio-transformed DBC (B-DBC) contained more aromatic, high molecular weight, and phenolic substances compared with pristine DBC (P-DBC). The photodegradation of 17α-ethynylestradiol (EE2) was significantly promoted by B-DBC because of its superior capacity for producing 3DBC*. Moreover, the subsequent goethite fractionation selectively reduced the parts of components with high aromaticity and carboxylic functional groups in B-DBC. The interaction between B-DBC and goethite resulted in the release of Fe2+ into goethite-fractionated DBC (G-DBC), which induced the photodegradation mechanism of EE2 shifting from a single-electron transfer driven by 3DBCâ to the oxidation of â¢OH. This study provides valuable insights into the changes in photochemical behavior of DBC resulting from biotic or abiotic processes, and enhances our understanding of the role of DBC in the fate of organic pollutants.
RESUMEN
Background and Purpose: Epidemiological studies on low back pain in residents living in mountainous areas are scarce. The study was aimed at investigating the prevalence and associated factors of low back pain in Chongqing, relatively impoverished mountainous areas of China. Materials and Methods: This was a cross-sectional study conducted at selected community or village health service centers in Chongqing over a 2-month period (May 2021 to June 2021), which included adults of Chongqing aged >18 years with or without low back pain (N=1820) chosen by stratified, cluster-sampling. Associated factors of low back pain including sociodemographic characteristics, lifestyle, and occupational features were collected, along with medical history, Oswestry Disability Questionnaire (ODI), and Numerical Rating Scale (NRS) of patients with low back pain, and carried out for at least 20 minutes per respondent. Univariate and multivariate logistic regression models were utilized for statistical analysis. Results: Overall, 30.5% of 1704 respondents presented with low back pain, with 26.3% living in flat areas and 35.6% in mountainous areas. The associated factors of low back pain were mountainous area residence (OR 1.4, 95% CI 1.1-1.8), advanced age (OR 1.8, 95% CI 1.3-2.5 for those aged 45-59 years, OR 2.3, 95% CI 1.6-3.4 for those aged 60-74 years, and OR 2.1, 95% CI 1.2-3.6 for those aged ≥75 years), married or remarried (OR 1.9, 95% CI 1.1-3.2), divorced or widowed (OR 2.7, 95% CI 14-5.4), moderate labor intensity (OR 1.4, 95% CI 1.1-1.8), frequent stoop (OR 1.6, 95% CI 1.1-2.4), and depressed mood (OR 1.6, 95% CI 1.2-2.1). Residents in the mountainous areas had a higher score on Oswestry Disability Questionnaire (8.3 [SD 6.3] vs 6.2 [SD 4.3]) than those in flat areas. Conclusion: Mountainous areas in Chongqing had higher prevalence of low back pain as 35.6%, compared with 26.3% in flat areas, with more severe dysfunction in low back pain patients. Multifactorial analysis found that the factors associated with low back pain in Chongqing residents included mountain residence, labor intensity, stoop, psychological factors and frequency of exercise.
RESUMEN
Increasing drug residues in aquatic environments have been caused by the abuse of antivirals since the global spread of the COVID-19 epidemic, whereas research on the photolytic mechanism, pathways and toxicity of these drugs is limited. The concentration of COVID-19 antivirals ribavirin in rivers has been reported to increase after the epidemic. Its photolytic behavior and environmental risk in actual waters such as wastewater treatment plant (WWTP) effluent, river water and lake water were first investigated in this study. Direct photolysis of ribavirin in these media was limited, but indirect photolysis was promoted in WWTP effluent and lake water by dissolved organic matter and NO3-. Identification of photolytic intermediates suggested that ribavirin was photolyzed mainly via C-N bond cleavage, splitting of the furan ring and oxidation of the hydroxyl group. Notably, the acute toxicity was increased after ribavirin photolysis owing to the higher toxicity of most of the products. Additionally, the overall toxicity was greater when ARB photolysis in WWTP effluent and lake water. These findings emphasize the necessity to concern about the toxicity of ribavirin transformation in natural waters, as well as to limit its usage and discharge.
Asunto(s)
Antivirales , COVID-19 , Ribavirina , Contaminantes Químicos del Agua , Humanos , Antagonistas de Receptores de Angiotensina , Inhibidores de la Enzima Convertidora de Angiotensina , Antivirales/química , Fotólisis , Ribavirina/química , Agua/química , Contaminantes Químicos del Agua/químicaRESUMEN
InGaAs/AlGaAs multiple quantum well lasers grown on silicon (001) by molecular beam epitaxy have been demonstrated. By inserting InAlAs trapping layers into AlGaAs cladding layers, misfit dislocations easily located in the active region can be effectively transferred out of the active region. For comparison, the same laser structure without the InAlAs trapping layers was also grown. All these as-grown materials were fabricated into Fabry-Perot lasers with the same cavity size of 20 × 1000 µm2. The laser with trapping layers achieved a 2.7-fold reduction in threshold current density under pulsed operation (5 µs-pulsed width, 1%-duty cycle) compared to the counterpart, and further realized a room-temperature continuous-wave lasing with a threshold current of 537â mA which corresponds to a threshold current density of 2.7â kA/cm2. When the injection current reached 1000â mA, the single-facet maximum output power and slope efficiency were 45.3â mW and 0.143 W/A, respectively. This work demonstrates significantly improved performances of InGaAs/AlGaAs quantum well lasers monolithically grown on silicon, providing a feasible solution to optimize the InGaAs quantum well structure.